Documents printed very high on paper.

Hi, i own a deskjet F2480, and i think there's a problem with its alignment. It keeps printing my documents really high up the paper, and this occured after i changed a cartridge and aligned it. 
Is there anything i can do to get the alignment back in place?  

Hi, i own a deskjet F2480, and i think there's a problem with its alignment. It keeps printing my documents really high up the paper, and this occured after i changed a cartridge and aligned it. 
Is there anything i can do to get the alignment back in place?  

Similar Messages

  • Document printing very very small in corner of page

    My pdf s are printing very very small in the corner of the Page.  This just started yesterday.  I cant figure out in any of my settings why this would have started.  It is also intermittent meaning that it does not happen with all documents.

    Can you post a screenshot?
    Have you updated the printer drivers and checked?
    Regards,
    Rave

  • I just updated my OS to Mavericks, as well as my Pages app. Now my previously created documents print out as blank paper, even tho I can see the text on my desktop.The margins have also been altered. How do I fix this?

    I just updated to Mavericks, then updated my Pages App. Now none of my previously created documents print out, except as blank pages, even though I can see the text on the documents, but with altered margins, on my computer screen. How do I fix this so the documents print out normally again?

    Purplehiddledog wrote:
    I do backup with iCloud.  I can't wait until the new iMac is available so that I can once again have my files in more than 1 location without needing to rely solely on the cloud. 
    I also rely on iTunes and my MacBook and Time Machine as well as backing up to iCloud. I know many users know have gone totally PC free, but I chose to use iCloud merely as my third backup.
    I assume that the restore would result in my ability to open Pages and Numbers and fix the problem with deleting apps, but this would also mean that if my Numbers documents still exist solely within the app and are just not on iCloud for some reason that they would be gone forever.  Is that right?
    In a word, yes. In a little more detail.... When you restore from an iCloud backup, you must erase the device and start all over again. There is no other way to access the backup in iCloud without erasing the device. Consequently, you are starting all over again. Therefore, it would also be my assumption that Pages and Numbers will work again and that the deleting apps issues would be fixed as well.
    If the documents are not in the backup, and you do not have a backup elsewhere, the documents could be gone forever.

  • Color Printing on High Gloss Paper

    I'm using an HP Photosmart Premium  All in One (C309a). I am printing a camouflage pattern, with a lot of color on top of color, using high gloss transfer paper. The variations in color are getting lost on the high gloss although it prints out just fine on regular paper.
    I'm using the Best quality option and have tried both the HP Premium Plus Photo Paper setting as well as Glossy Greeting Card. I've also tried printing with both the RLT photo fix setting on and off.  No luck.
    I haven't played around with other, more advanced, settings because I'm not familiar with them and I'm tired of wasting paper ($$). Any suggestions?
    This question was solved.
    View Solution.

    Okay. I'm not currently a blonde but apparently old habits die hard :0
    In my frustration I failed to check the ink level of my photo black, which I rarely use. I'm fairly certain a new cartridge is going to solve my problem.
    Sorry to have wasted anybody's time.

  • Problems printing a high qaulity PDF from a document

    Hello,
    Recently I have had some problems printing a high qaulity pdf (acrobat 9 pro) from a document made in 2010 word.
    Every time I have tried to print these documents there is information missing in the pdf incuding text, pictures, shapes etc.. This was never a problem untill I installed 2010 word.
    I sent it to a friend, and he was able to print the document into a pdf just fine.
    What can I do to fix this? It is very important that I tackle this problem asap!
    If you need to know any additional information, please ask.
    Thanks

    Have you  checked to see if Acrobat 9 or any version of Acrobat works with Office 2010?
    Adobe product operating system compatibility
    This issue has been discussed many times. Until Adobe releases the next version of Acrobat, there is very little you can do.

  • My c6180 wont print on kodak ultra premium high gloss paper but will print on plain paper

    my c6180 wont print on kodak ultra premium high gloss paper but will print on plain paper. am i doing something wrong? I've never used the printer to print pictures.

    Hi there bigpul,
    Could you provide the community with a little more information to help narrow troubleshooting? What operating system are you using and are you recieving any errors or just blank prints?
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • I had new roller kit installed on my laser 3500N. Now it prints about 1/4" to high on paper

    How can I fix printing 1/4" high on paper since I had new roller kit installed.  Tech can't solve problem.  Is there adjustment in printer paper path?

    Download the installer for the version of Photoshop you have a licence for and install Photoshop using the download and your serial or subscription sign in.  Photoshop should be installed on your Boot disk....

  • I have added photos to a portfolio website I'm building and a lot of them look VERY grainy when you click on them. They are nice clean large files and can print bat high res way over 16" x 20" so whats happened to them in iWeb?

    I have added photos to a portfolio website I'm building and a lot of them look VERY grainy when you click on them. They are nice clean large files and can print bat high res way over 16" x 20" so whats happened to them in iWeb?

    When you are dealing with websites, image file size is a trade off between quality and download speed. There's not a lot of point to having high quality images if they take too long to download in the browser.
    Nowadays we also have to consider the device that the end user is viewing the images on. An image that is optimized for viewing on a large screen is total overkill and unsuitable for those using mobile devices.
    Really we should be supplying different versions of media files for different devices using @media rules in the stylesheet but this is rather outside of the scope of iWeb. If you use the built in image optimizer and the iWeb Photo template with slideshow, the application will optimize the images according to the way in which you set this function in preferences and the slideshow size will be automatically reduced for those viewing it on smaller screens.
    If you want to give your viewers the opportunity to view large, high quality images, you can supply them as a download.

  • Very high network traffic to printer

    I am seeing very high network traffic between my Mac (iMac, running Mavericks) and my printer, a Canon MP640, connected via Ethernet. This is when the printer is idle. According to Little Snitch, the traffic is on the order of about 50 kB/s! The network traffic comes from mDNSresponder, and is directed to canonmp640.local; it is using UDP port 5353, which seems to be the mDNS port (again, according to Little Snitch). The traffic of course goes away if the printer is off, but it needs to remain on because it is being used as a printer for other computers/devices around the house.
    Is this amount of network traffic for an idle printer normal? Anyone has any idea how to stop it from doing that? I even captured some of that traffic using Little Snitch, but nothing that provided any insight to me...
    Thanks in advance for any help or suggestion!

    mDNSresponder is the Bonjour agent. Perhaps your printer is connecting as a Bonjour printer. See Disable Bonjour by turning off mDNSResponder - OS X Daily and OS X: How to disable Bonjour service advertising without .... I would also do a little Google search on "mdnsresponder." Also, you may want to contact Canon tech support.

  • What is best all in one printer for my new MacBook Pro ? Needs to make very high quality photos.

    What is best all in one printer for my new MacBook Pro ? Needs to make very high quality photos. Using USB connection.

    That's a difficult one but I'd always go for HP as they make so many excellent models that you'll always be able to buy the cartridges from almost anyone.  Theyre darn good printer too.  I have four in the office here and one of them is a very neat flatbed with exceptionally high tonal qualities.  One of their cheaper models is the HP 5520 A4 inkjet all-in-one - CMYK.  Good value at £70 and 4800 x 1200 DPI. 

  • HP 6500 Printer and prints very faintly.

    I changed my ink cartridges in my HP 6500 printer and it now prints very faintly or when I send a test print to the printer from my computer it will only feed the paper thru the printer.

    The document here may help resolve black not printing on your Officejet 6500.  Be sure to check the vents as shown in solution three.  If this does not resolve the issue the post here may help.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • My 6500a prints very small, there are no settings in printer pref. that allow enlargement

    my 6500a prints very small, there are no settings in printer pref. that allow enlargement

    Hello MartyTheArtist,
    May I know  you installed Basic Print Driver or Full Feature Software?
    I am not holding 7110 printer but I have access officejet 6700 and Photosmart 7510.
    Anyway, you should able to see the similar print options if you did install full feature software.
    When you print, under the print advance options, there is an option  called. "HP Real life Technologies".  You may on this option  and it will "automatically remove redeye in photographs and to automatically adjust high-contrast photos to reveal details that are otherwise lost in shadows. I have attached the screen shot for your reference."
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&​lc=en&docname=c01072230
    I am an amteur photographer and personally, I do prefer to do post processing jobs in Photoshop first and then use the printer just to print by choosing the apporopirate photopaper and using Best Mode.
    May be you might have differnet preferences way of doing it. I am just sharing my way of printing photos
    By the way, when you install Full Feature Software, you have the option to install HP Photo Creation Software which is very simple and easy to create greeting cards, photo books and many other things. Maybe you might give it a try if you have not tried.
    Kindly let us know if you have more queries
    Cheers,
    Bryan
    *I am an HP employee*
    ** Please click "Accept as Solution" if it solved your problem, so others can find it **
    ***Give Kudos to say "Thanks" by clicking on the thumbs up button under my name***

  • Power Mac G4 MDD 1.25GHz DP often completely locks up in the first few minutes after booting, sometimes with the spinning beach ball, normally with a very high pitched whining noise.

    Over the last few months my Mac has developed a worrying habit.
    Within the first few minutes of starting it up (perhaps on average about 50% of the time) it will completely lock up. This may happen at the Log In screen (if I start up the Mac & then leave it for a while) or during normal use.
    Often the first symptom is a very high pitched (but quiet) whining noise that seems to come from the loud speaker on the front of the Mac. The pointer may freeze at this point, or it may still be moveable for 5 or 10 seconds before it freezes. It sometimes turns into the spinning beach ball during this. Once locked up the only way I can restart the Mac is to hold down the power button on the front for a few seconds to completely reboot the machine.
    Once the Mac has restarted, it usually behaves normally, almost always for the rest of the day. The initial lock up & resulting restart only normally seem to happen the first time I use the Mac that day.
    The only peripherals attached to the Mac (apart from the display, keyboard & mouse) are an ADSL modem, a USB printer and a pair of Apple Pro speakers, and this setup hasn't changed since long before the problems started, so I'm confident that I can discount the peripherals causing problems. I doubt that unplugging the speakers, for example, would have any effect.
    I've run Disc Utility, OnyX and DiscWarrior without anything major cropping up. My instincts (I've been troubleshooting Mac problems for 16 years) tell me that I have a fundamental hardware problem, possibly with one of the 4 RAM DIMMs installed.
    The RAM configuration is shown in the attached screen grab.
    I'm considering removing one DIMM, running with 1.5GB of RAM rather than 2GB for a while, and repeating with a different DIMM removed each time until I can hopefully isolate the dodgy DIMM.
    Do people feel this is a sensible approach, or should I try something else first?
    Many thanks.

    Sometimes visual inpection will show bulging tops/sides., my guess is if it is it's most likely in the PSU.
    Possible cheap fix, You can convert an ATX PSU for use on a G4...
    http://atxg4.com/mdd.html
    http://atxg4.com/

  • HP LaserJet P2055dn Printer printing very dim

    Hi,
    I have a problem with  HP Laserjet P2055 dn Printer which printing very dim. I have run service clean then change the Cartridge but problem is still there. Plz help me what to do coz i have not much knowledge of Printers. 

    I am providing you the link on a document that has information on your issue. This might help you.
    http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c02697738&jumpi...
    Regards,
    affableLJ
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as Accepted Solution
    I am an HP employee!

  • Officejet Pro 8500A - unable to print on odd-size paper

    After a couple of hours of frustration, I have decided that I an unable to print on odd-sized paper on our brand new HP printer!  On an older string in this user forum, one suggestion was to make a paper cut-out from regular sized paper to put on top of an envelope to "fool" the printer into thinking it was using standard sized paper.  I am trying to print odd-sized wedding invitations, and in order to to do this, I wouldn't be able to use the paper guides intended to keep the smaller paper in the middle.
    Another suggestion would be to create a "custom size" paper in the printer properties, which doesn't seem to be possible in Windows XP as far as I can see. 
    My card-stock paper measures 4 3/4" x 6 7/8"  Neither 5 x 7" nor 4 x 6" will work and I have tried numerous others, such as Janpanese postcard, Index card 4 x 6, etc. 
    Any suggestions?  This is frustrating enough to look at other namebrand printers next time, but I guess I'm stuck with this one for a while!

    Hello @drlogan0, 
    Welcome to the HP forums.
    I understand that you are encountering problems with getting your Officejet pro 8500A onto your new wireless network.
    I would like to help.
    i would try restoring the network defaults. This will help erase any 'old' information that may be stuck in the printers memory. I would like to give you specific steps for this, but I am unsure if you have the 8500A, 8500A wireless, or the 8500A premium.
    Basically the steps are, go into the network menu, and select restore network defaults.
    If you have tried restoring the network defaults already, please review the following troubleshooting documents.
    Setting Up the Printer for a Wired or Wireless Network for the HP Officejet Pro 8500A
    Printer Does Not Maintain Wireless Connection
    Aardvark1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Maybe you are looking for