Documents related to ALE & EDI
Hello Everyone,
Can anyone provide me the good document regarding ALE & EDI, which gives me the flow about:
1. How Idoc is created (after triggering through any Transaction or using Program - With & whout Message Control)?
2. Then, how it is passed to another partner in case of EDI and ALE?
I want a flow in detail, so that I can work on it.
Thanks in advance.
Please help ASAP.
Kind Regards,
Prasad
Hi, this may help You.
Data Creation in Idoc
IDocs are text encoded documents with a rigid structure that are used to exchange data between R/3 and a foreign system. Instead of calling a program in the destination system directly, the data is first packed into an IDoc and then sent to the receiving system, where it is analyzed and properly processed. Therefore an IDoc data exchange is always an
asynchronous process. The significant difference between simple RFC-calls and IDoc data exchange is the fact, that every action performed on IDocs are protocolled by R/3 and IDocs can be reprocessed if an error occurred in one of the message steps.
While IDocs have to be understood as a data exchange protocol, EDI and ALE are typical use cases for IDocs. R/3 uses IDocs for both EDI and ALE to deliver data to the receiving system. ALE is basically the scheduling mechanism that defines when and between which partners and what kind of data will be exchanged on a regular or event triggered basis. Such a set-up is called an ALE-scenario.
IDoc is a intermediate document to exchange data between two SAP Systems.
*IDocs are structured ASCII files (or a virtual equivalent).
*Electronic Interchange Document
*They are the file format used by SAP R/3 to exchange data with foreign systems.
*Data Is transmitted in ASCII format, i.e. human readable form
*IDocs exchange messages
*IDocs are used like classical interface files
IDOC types are templates for specific message types depending on what is the business document, you want to exchange.
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
FOr testing you can use WE19.
How to create idoc?
*WE30 - you can create a IDOC type
For more information in details on the same along with the examples can be viewed on:
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400404
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
http://www.sappoint.com/presentation.html
http://www.allsaplinks.com/idoc_search.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://www.erpgenie.com/sapedi/idoc_abap.htm
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30 )
Create Message Type ( WE81 )
Assign Idoc Type to Message Type ( WE82 )
Creating a Segment
Go to transaction code WE31
Enter the name for your segment type and click on the Create icon
Type the short text
Enter the variable names and data elements
Save it and go back
Go to Edit -> Set Release
Follow steps to create more number of segments
Create IDOC Type
Go to transaction code WE30
Enter the Object Name, select Basic type and click Create icon
Select the create new option and enter a description for your basic IDOC type and press enter
Select the IDOC Name and click Create icon
The system prompts us to enter a segment type and its attributes
Choose the appropriate values and press Enter
The system transfers the name of the segment type to the IDOC editor.
Follow these steps to add more number of segments to Parent or as Parent-child relation
Save it and go back
Go to Edit -> Set release
Create Message Type
Go to transaction code WE81
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter
Click New Entries to create new Message Type
Fill details
Save it and go back
Assign Message Type to IDoc Type
Go to transaction code WE82
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter.
Click New Entries to create new Message Type.
Fill details
Save it and go back
Check these out..
Re: How to create IDOC
Check below link. It will give the step by step procedure for IDOC creation.
http://www.supinfo-projects.com/cn/2005/idocs_en/2/
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs
go trough these links.
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
An IDoc is simply a data container that is used to exchange information between any two processes that can understand the syntax and semantics of the data...
1.IDOCs are stored in the database. In the SAP system, IDOCs are stored in database tables.
2.IDOCs are independent of the sending and receiving systems.
3.IDOCs are independent of the direction of data exchange.
The two available process for IDOCs are
Outbound Process
Inbound Process
AND There are basically two types of IDOCs.
Basic IDOCs
Basic IDOC type defines the structure and format of the business document that is to be exchanged between two systems.
Extended IDOCs
Extending the functionality by adding more segments to existing Basic IDOCs.
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30)
Create Message Type ( WE81)
Assign Idoc Type to Message Type ( WE82)
imp links
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
www.sappoint.com
--here u can find the ppts and basic seetings for ALE
http://sappoint.com/presentation.html
www.sapgenie.com
http://www.sapgenie.com/ale/index.htm
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
Try this..Hope this will help.
>>>> SAP ALE & IDOC<<<<
Steps to configuration(Basis) >>
1. Create Logical System (LS) for each applicable ALE-enabled client
2. Link client to Logical System on the respective servers
3. Create background user, to be used by ALE(with authorizaton for ALE postings)
4. Create RFC Destinations(SM59)
5. Ports in Idoc processing(WE21)
6. Generate partner profiles for sending system
The functional configuration(Tcode: SALE)
Create a Customer Distribution Model (CDM);
Add appropriate message types and filters to the CDM;
Generate outbound partner profiles;
Distribute the CDM to the receiving systems; and
Generate inbound partner profiles on each of the clients.
Steps to customize a new IDoc >>>
1. Define IDoc Segment (WE31)
2. Convert Segments into an IDoc type (WE30)
3. Create a Message Type (WE81)
4. Create valid Combination of Message & IDoc type(WE82)
5. Define Processing Code(WE41 for OUT / WE42 for IN)
6. Define Partner Profile(WE20)
Important Transaction Codes:
SALE - IMG ALE Configuration root
WE20 - Manually maintain partner profiles
BD64 - Maintain customer distribution model
BD71 - Distribute customer distribution model
SM59 - Create RFC Destinations
BDM5 - Consistency check (Transaction scenarios)
BD82 - Generate Partner Profiles
BD61 - Activate Change Pointers - Globally
BD50 - Activate Change Pointer for Msg Type
BD52 - Activate change pointer per change.doc object
BD59 - Allocation object type -> IDOC type
BD56 - Maintain IDOC Segment Filters
BD53 - Reduction of Message Types
BD21 - Select Change Pointer
BD87 - Status Monitor for ALE Messages
BDM5 - Consistency check (Transaction scenarios)
BD62 - Define rules
BD79 - Maintain rules
BD55 - Defining settings for IDoc conversion
WEDI - ALE IDoc Administration
WE21 - Ports in Idoc processing
WE60 - IDoc documentation
SARA - IDoc archiving (Object type IDOC)
WE47 - IDoc status maintenance
WE07 - IDoc statistics
BALE - ALE Distribution Administration
WE05 - IDoc overview
BD87 - Inbound IDoc reprocessing
BD88 - Outbound IDoc reprocessing
BDM2 - IDoc Trace
BDM7 - IDoc Audit Analysis
BD21 - Create IDocs from change pointers
SM58 - Schedule RFC Failures
Basic config for Distributed data:
BD64: Maintain a Distributed Model
BD82: Generate Partner Profile
BD64: Distribute the distribution Model
Programs
RBDMIDOC Creating IDoc Type from Change Pointers
RSEOUT00 Process all selected IDocs (EDI)
RBDAPP01 - Inbound Processing of IDocs Ready for Transfer
RSARFCEX - Execute Calls Not Yet Executed
RBDMOIND - Status Conversion with Successful tRFC Execution
RBDMANIN - Start error handling for non-posted IDocs
RBDSTATE - Send Audit Confirmations
FOr testing you can use WE19.
With Regards
Madhu.
Similar Messages
-
Relation of ALE , EDI and idoc
HI
what is relation of these ALE, EDI, IDOC , i know the definition of these , i want know ( while the transfer of sap to sap ALE tool is used ,) where this idoc is used ,
regards
shivajiHi Shivaji,
What is EDI ?
Electronic Data Interchange
The computer-to-computer electronic exchange of machine processable business documents in a standard format
An electronic alternative to paper, fax, and phone-based transactions used by companies to communicate with one another
Purpose:
Allows for better time management and relieves the entering of duplicate information while cutting down on discrepancies and human intervention.
The Electronic Data Interchange component in Sales and Distribution consists of an Intermediate Document (IDoc) [Ext.] interface. You can use this interface to
send messages (outbound processing) such as an order confirmation through Electronic Data Interchange (EDI)
receive messages (inbound processing) such as a sales order through EDI
EDI:
What ?
The technology of transmitting documents electronically
Why ?
For Electronic Data Interchange between a company and trading partners
How ?
By means of an electronic document - the IDoc
From the SAP side, the EDI interface is based on IDoc technology, which is independent of
EDI standards. All data is transferred in files between the R/3 System and the EDI subsystem.
Synchronous Remote Function Call (RFC) is implemented to define the time of transfer for a
file between the two systems. The following data can be transferred using the EDI interface:
Outbound Idocs: IDocs are transferred from the R/3 System to the EDI subsystem.
Inbound Idocs: IDocs are transferred from the EDI subsystem to the R/3 System.
Status report: The EDI subsystem sends a status report to the R/3 System on the progress of
the processing of the outbound Idoc.
Contents of IDOC
The data in every IDoc is exchanged between the SAP system and a subsystem in the following three record types, irrespective of the IDoc type:
Control record (Table: EDIDC): Contains information about Sender and Receiver. There is only one control record per IDoc. It consists of
IDoc Number
Sender and Receiver information
IDoc Message Type* / Port.
IDoc Type / Direction / Current status / Partner No / Partner Type (Vendor/customer)
Data record (Table: EDIDD): Contains the message to be exchanged between Sender and Receiver. An IDoc can contain multiple data records, as defined by the IDoc structure. Data records store application data such as purchase order / sales order header information, sales order details like sales doc #, Material / Qty and other relevant information.
Status record (Table: EDIDS): Contains Status of IDoc at various stages, during the transmission of IDoc between Sender and Receiver. Multiple status records are usually attached to an IDoc. Status records are attached to an IDoc throughout the process like status code, date and time at every stage
Know Me
Basic Type: The form of IDOC type that is originally created in the system. Like ORDERS01 is a basic type IDOC for order messages. It is using the basic types only you would be able to enhance them to suit new requirements within the same IDOC structure. Any enhancement to the basic type IDOC will produce an Extension IDOC that would be more or less similar to the basic type with some new additions (of segments or fields). Here, I would go on to say that IDOC type and Basic type is the same thing that would be referred to interchangeably.
Message type: Again, obvious from the name, its the message that is being conveyed. A message type is assigned to the Basic type. Here, logical messages are assigned to the basic type to reflect a business message being transacted. For example, ORDERS is the message type for a purchase order sent by buyer to vendor. The use of which Basic type in this message will differ from buyer to vendor. Basic types used for ORDERS are ORDERS01/02/ etc...Also, one may come up with a custom built IDOC type (or basic type as you can say)...But it is essential to associate a message type with a basic type IDOC. This feature will enable the same IDOC type to be used for a related message. For example : ORDERS01 can be used for message ORDERS for posting a order, the same IDOC can be associated with message ORDCHG to indicate that the message is an order change and so the processing of this IDOC will change accordingly.
IDoc Type:
 Defines the structure of data records
 IDoc Type is used to understand the message in string form available in the data records.
 IDoc type is version dependent i.e an Idoc type can be used only in versions in and above the version in which IDoc is released.
 Transaction WE30 is used to define and release IDoc Types
 Newly created Idoc is a BASIC IDoc and modifications
(Additions of segments) to IDoc after it has been released can be done by creation of extension of IDoc.
 IDoc type can be defined by structuring Segments
Function Module: The most important player in the IDOC processing. This is nothing but an ABAP program to process the IDOC. SAP has supplied function modules to process all standard basic IDOCs and messages. A function module is determined based on the Basic IDOC type and the message type (also message code). So from the above descriptions about basic and message type, the combination of two would primarily determine which IDOC will process this idoc. As an instance, ORDERS01 with message ORDERS is configured to be processed by FM IDOC_INPUT_ORDERS. Similarly, ORDERS01 + ORDCHG will be processed by IDOC_INPUT_ORDCHG. Likewise, you can see all associations in WE57 for inbound. For out bounds, you would refer to process codes (WE41).
Segments: The idenfiers in the IDOC structure which indicates the data, their level, state of occurrence....You can take them as records in the IDOC. Each individual segment will come to you as a record in the IDOC. (Go to EDID4, provide an IDOC # and it will list all included segments as records.) Segments are logically nested to indicate various levels of data (header, item etc).
Qualifiers: Inside the segments, there are fields that can carry actual data often signified by use of qualifiers. A qualifier for a segment field would provide the exact meaning of the data. For example, E1EDK03 segment is configured for dates related data. Segment field IDDAT qualifies the date type and the DATUM field gives out the actual date. So you may see a date qualified as 002, which can be interpreted as requested delivery date. Likewise you can see all qualifiers and their meanings in the associated segment fields in SE12. Give the segment name and go to the domain the ranges for the ID fields.
How EDI Works
Sending Data
Computer system serves as a data repository.
EDI extracts information from existing computer applications.
Transmits paperless, computer-readable documents via telephone lines.
Receiving Data
Fed directly into a computer system.
Automatically processed and interfaced with internal applications.
Processing Time
Accomplished in minutes.
No re-keying.
No paper shuffling.
No attendant costs of manual document processing and delivery.
What is the difference between ALE, EDI, IDocs and BAPI?
The interface concept of the classic R/3 is based on two different strategies: Remote Function Calls (RFC) and data exchange through IDoc message documents. RFC makes direct and synchronous calls of a program in the remote system. If the caller is an external program it will call an RFC-enabled function in R/3 and if the calling program is the R/3 system it will call an RFC-function in another R/3-system or it will call a non-R/3 program through a gateway-proxy (usually rfcexec.exe). BAPIs are a subset of the RFC-enabled function modules, especially designed as Application Programming Interface (API) to the SAP business object, or in other words: are function modules officially released by SAP to be called from external programs.
IDocs are text encoded documents with a rigid structure that are used to exchange data between R/3 and a foreign system. Instead of calling a program in the destination system directly, the data is first packed into an IDoc and then sent to the receiving system, where it is analyzed and properly processed. Therefore an IDoc data exchange is always an asynchronous process. The significant difference between simple RFC-calls and IDoc data exchange is the fact, that every action performed on IDocs are protocolled by R/3 and IDocs can be reprocessed if an error occurred in one of the message steps.
While IDocs have to be understood as a data exchange protocol, EDI and ALE are typical use cases for IDocs. R/3 uses IDocs for both EDI and ALE to deliver data to the receiving system. ALE is basically the scheduling mechanism that defines when and between which partners and what kind of data will be exchanged on a regular or event triggered basis. Such a set-up is called an ALE-scenario.
The philosophical difference between EDI and ALE can be pinned as follows: If we send data to an external partner, we generally speak of EDI, while ALE is a mechanism to reliable replicate data between trusting systems to store a redundant copy of the IDoc data. The difference is made clear, when we think of a purchase order that is sent as an IDoc. If we send the purchase order to a supplier then the supplier will store the purchase order as a sales order. However, if we send the purchase order via ALE to another R/3 system, then the receiving system will store the purchase order also as a purchase order.
ALE/EDI - Purpose
Electronic Data Interchange (EDI) and Application Link Enabling (ALE) are used for exchanging business data between different systems.
For both these forms of communication, you require the IDoc Interface. The IDoc interface is made up of the definition of a data structure and the processing logic of this data structure. The data structure is the IDoc. The IDoc is the general exchange format of the communicating systems. IDocs can be sent using different methods (for example, RFC or as a file).
Application Link Enabling (ALE)
You distribute data using ALE if you want to communicate from one system to one or more other (mostly internal) systems. ALE transfers data in IDoc format and uses the methods of tRFC for data transfer.
1. ALE enables the integration of business processes across several SAP or non-SAP systems.
Electronic Data Interchange (EDI)
You use EDI if you want to exchange business application documents with an (external) partner system (for example, a customer or vendor). The SAP system sends EDI messages in IDoc format to an EDI subsystem, where they are converted to a universal EDI standard (UN/EDIFACT or ANSI/X12). This enables communication with non-SAP systems.
1. By definition, two partners are involved in the process in an EDI application scenario: The sender and the recipient of an EDI message.
IDoc Interface/ALE
Purpose
The IDoc interface exchanges business data with an external system.
The IDoc interface consists of the definition of a data structure, along with processing logic for this data structure.
The data structure is the IDoc. The IDoc is the exchange format common to all the communicating systems. You can specify exception handling in the SAP Business Workflow, with IDocs, without the data already having to exist as SAP application documents.
You need the IDoc interface in the following scenarios:
Electronic data exchange (EDI)
Connect other business application systems (e.g. PC applications, external Workflow tools) by IDoc
Application Link Enabling (ALE).
Application Link Enabling (ALE) is a technology to create and run distributed applications
Hope this would help you.
Reward points if helpful.
Vamsi. -
IDOC scenario: MATMAS02 (Application document not posted ALE/EDI errors)
Hi!
I am almost ready with with my first File to Idoc scenario and having the following error.
(Idoc of type MATMAS.MATMAS02)
The IDOC will be received on business system B.
Unfortunately the following errors come in tcode BD87 or MM90
Enter a material type
Message no. M3098
No material number transferred
Message no. M3752
Can some one help me to trace and solve this problem?
Thank you very much!
regards
HolgerHi!
I corrected the error!
Now the Idoc has the status "yellow" which mean "IDOC ready to be transformed to application".
Is that still an error/warning or is everything is ok?
I mean does some background job started and create a material from this IDoc?
I loooked into tcode MM03 and cannot unfortunately detect any new materials....
kein Filtern , kein Umsetzen , kein Versionswandel .
Message no. B1005
In Log I could find:
IDoc successfully processed in the ALE layer
The IDoc has passed through the ALE layer successfully and can now be passed to the application. This transfer is either done online or as a background job, depending on the settings in the partner profile.
If there are no further status records, the IDoc waits for the next run of the transfer report to the application.
Success or failure when passing the IDoc to the application is documented in the subsequent status records.
Actions in the ALE layer
The parameter 'kein Filtern' indicates whether the processing in the ALE layer led to segments of the inbound IDoc being omitted. The important criteria here are the settings in the segment filter and in the distribution model for this sender.
The parameter 'kein Umsetzen' indicates whether field values were converted in the ALE layer. This is the case if the IDoc contains organizational units to be converted, or if the ALE conversion tool for this sender is activated.
The parameter 'kein Versionswandel' indicates whether the IDoc was converted into an earlier version of the IDoc type. This happens if the IDoc type of the sender is different from its own IDoc type.
Holger -
ALE EDI /IDOC Documents needed
Hi All,
Can any body send the ALE ,EDI and IDOC Dcouments with live examples.
My mail id is : [email protected]
Thanks and Regards,
MuralikrishnaHi
IDOC
Data Creation in Idoc
IDocs are text encoded documents with a rigid structure that are used to exchange data between R/3 and a foreign system. Instead of calling a program in the destination system directly, the data is first packed into an IDoc and then sent to the receiving system, where it is analyzed and properly processed. Therefore an IDoc data exchange is always an
asynchronous process. The significant difference between simple RFC-calls and IDoc data exchange is the fact, that every action performed on IDocs are protocolled by R/3 and IDocs can be reprocessed if an error occurred in one of the message steps.
While IDocs have to be understood as a data exchange protocol, EDI and ALE are typical use cases for IDocs. R/3 uses IDocs for both EDI and ALE to deliver data to the receiving system. ALE is basically the scheduling mechanism that defines when and between which partners and what kind of data will be exchanged on a regular or event triggered basis. Such a set-up is called an ALE-scenario.
IDoc is a intermediate document to exchange data between two SAP Systems.
*IDocs are structured ASCII files (or a virtual equivalent).
*Electronic Interchange Document
*They are the file format used by SAP R/3 to exchange data with foreign systems.
*Data Is transmitted in ASCII format, i.e. human readable form
*IDocs exchange messages
*IDocs are used like classical interface files
IDOC types are templates for specific message types depending on what is the business document, you want to exchange.
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
FOr testing you can use WE19.
How to create idoc?
*WE30 - you can create a IDOC type
For more information in details on the same along with the examples can be viewed on:
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400404
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
http://www.sappoint.com/presentation.html
http://www.allsaplinks.com/idoc_search.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://www.erpgenie.com/sapedi/idoc_abap.htm
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30 )
Create Message Type ( WE81 )
Assign Idoc Type to Message Type ( WE82 )
Creating a Segment
Go to transaction code WE31
Enter the name for your segment type and click on the Create icon
Type the short text
Enter the variable names and data elements
Save it and go back
Go to Edit -> Set Release
Follow steps to create more number of segments
Create IDOC Type
Go to transaction code WE30
Enter the Object Name, select Basic type and click Create icon
Select the create new option and enter a description for your basic IDOC type and press enter
Select the IDOC Name and click Create icon
The system prompts us to enter a segment type and its attributes
Choose the appropriate values and press Enter
The system transfers the name of the segment type to the IDOC editor.
Follow these steps to add more number of segments to Parent or as Parent-child relation
Save it and go back
Go to Edit -> Set release
Create Message Type
Go to transaction code WE81
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter
Click New Entries to create new Message Type
Fill details
Save it and go back
Assign Message Type to IDoc Type
Go to transaction code WE82
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter.
Click New Entries to create new Message Type.
Fill details
Save it and go back
Check these out..
Re: How to create IDOC
Check below link. It will give the step by step procedure for IDOC creation.
http://www.supinfo-projects.com/cn/2005/idocs_en/2/
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs
go trough these links.
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
An IDoc is simply a data container that is used to exchange information between any two processes that can understand the syntax and semantics of the data...
1.IDOCs are stored in the database. In the SAP system, IDOCs are stored in database tables.
2.IDOCs are independent of the sending and receiving systems.
3.IDOCs are independent of the direction of data exchange.
The two available process for IDOCs are
Outbound Process
Inbound Process
AND There are basically two types of IDOCs.
Basic IDOCs
Basic IDOC type defines the structure and format of the business document that is to be exchanged between two systems.
Extended IDOCs
Extending the functionality by adding more segments to existing Basic IDOCs.
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30)
Create Message Type ( WE81)
Assign Idoc Type to Message Type ( WE82)
imp links
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
www.sappoint.com
--here u can find the ppts and basic seetings for ALE
http://sappoint.com/presentation.html
www.sapgenie.com
http://www.sapgenie.com/ale/index.htm
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
Try this..Hope this will help.
>>>> SAP ALE & IDOC<<<<
Steps to configuration(Basis) >>
1. Create Logical System (LS) for each applicable ALE-enabled client
2. Link client to Logical System on the respective servers
3. Create background user, to be used by ALE(with authorizaton for ALE postings)
4. Create RFC Destinations(SM59)
5. Ports in Idoc processing(WE21)
6. Generate partner profiles for sending system
The functional configuration(Tcode: SALE)
Create a Customer Distribution Model (CDM);
Add appropriate message types and filters to the CDM;
Generate outbound partner profiles;
Distribute the CDM to the receiving systems; and
Generate inbound partner profiles on each of the clients.
Steps to customize a new IDoc >>>
1. Define IDoc Segment (WE31)
2. Convert Segments into an IDoc type (WE30)
3. Create a Message Type (WE81)
4. Create valid Combination of Message & IDoc type(WE82)
5. Define Processing Code(WE41 for OUT / WE42 for IN)
6. Define Partner Profile(WE20)
Important Transaction Codes:
SALE - IMG ALE Configuration root
WE20 - Manually maintain partner profiles
BD64 - Maintain customer distribution model
BD71 - Distribute customer distribution model
SM59 - Create RFC Destinations
BDM5 - Consistency check (Transaction scenarios)
BD82 - Generate Partner Profiles
BD61 - Activate Change Pointers - Globally
BD50 - Activate Change Pointer for Msg Type
BD52 - Activate change pointer per change.doc object
BD59 - Allocation object type -> IDOC type
BD56 - Maintain IDOC Segment Filters
BD53 - Reduction of Message Types
BD21 - Select Change Pointer
BD87 - Status Monitor for ALE Messages
BDM5 - Consistency check (Transaction scenarios)
BD62 - Define rules
BD79 - Maintain rules
BD55 - Defining settings for IDoc conversion
WEDI - ALE IDoc Administration
WE21 - Ports in Idoc processing
WE60 - IDoc documentation
SARA - IDoc archiving (Object type IDOC)
WE47 - IDoc status maintenance
WE07 - IDoc statistics
BALE - ALE Distribution Administration
WE05 - IDoc overview
BD87 - Inbound IDoc reprocessing
BD88 - Outbound IDoc reprocessing
BDM2 - IDoc Trace
BDM7 - IDoc Audit Analysis
BD21 - Create IDocs from change pointers
SM58 - Schedule RFC Failures
Basic config for Distributed data:
BD64: Maintain a Distributed Model
BD82: Generate Partner Profile
BD64: Distribute the distribution Model
Programs
RBDMIDOC Creating IDoc Type from Change Pointers
RSEOUT00 Process all selected IDocs (EDI)
RBDAPP01 - Inbound Processing of IDocs Ready for Transfer
RSARFCEX - Execute Calls Not Yet Executed
RBDMOIND - Status Conversion with Successful tRFC Execution
RBDMANIN - Start error handling for non-posted IDocs
RBDSTATE - Send Audit Confirmations
FOr testing you can use WE19.
Check these links.
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs
Please check this PDF documents for ALE and IDoc.
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEIO/BCMIDALEIO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEPRO/BCMIDALEPRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEQS/CABFAALEQS.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDISC/CAEDISCAP_STC.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDI/CAEDI.pdf
Check below link. It will give the step by step procedure for IDOC creation.
http://www.supinfo-projects.com/cn/2005/idocs_en/2/
EDI
Electronic Data Interchange
Cross-company exchange of electronic data (for example business documents) between domestic and international business partners who use a variety of hardware, software, and communication services. The data involved is formatted according to predefined standards. In addition to this, SAP ALE technology is available for data exchange within a company.
Refer
http://www.erpgenie.com/sapedi/index.htm
http://help.sap.com/saphelp_nw04/helpdata/en/72/c18ee5546a11d182cc0000e829fbfe/frameset.htm
https://www.2020software.com/products/Fourth_Shift_Edition_for_SAP_Business_One_Electronic_Data_Interchange.asp
http://downloads-zdnet.com.com/SoftwareandWebDevelopment/SoftwareDevelopmentTools/ElectronicData+Interchange/
http://www.erpgenie.com/sapedi/index.htm
http://www.kostal.com/english/downloads/EDI_AGB_eng.pdfd
EDI FLOW :
Here is some thing which helps you and here the purchase order is taken as example too..
Electronic Data Interchange, or EDI, is the electronic exchange of business data. Using a standard format, EDI provides a method of transmitting business data from one computer to another, without the need to re-key data. This electronic link can result in more effective business transactions. With EDI, paper documents such as invoices can be replaced with electronic transmissions, thus time is saved, and the potential for error is minimized. Data can be exchanged at any time. Related business expenses, such as postage, printing, phone calls, and handling, can also be significantly reduced. EDI can aid in the support of manufacturing efforts, such as Just-in-Time and Third Party Warehousing, and financial efforts, such as Electronic Payments.
What parts of the business cycle can be supported by EDI?
Any business documents that are currently exchanged using paper can be converted to an EDI. Standards. Standards include ANSI X12 and XML/EDI are primarily used in the United States, while EDIFACT is used in Europe and Asia.
How does EDI get started?
EDI gets started when one company contacts another expressing interest in trading business documents electronically using Electronic Data Interchange. The two companies must first determine each other's EDI capabilities. If you do not already know your EDI capabilities, we have prepared a questionnaire to help you determine them. If you are already EDI capable, we will coordinate with your technical staff to determine a testing plan. Upon completion of testing the EDI documents, the appropriate business personnel will set a production start date to begin the exchange of EDI business data. If you are not EDI capable, we recommend you first obtain a commitment from your upper management. Your company will need to allocate resources and capital for software, hardware, testing, possible programming, and training.
What is the flow of EDI?
The flow of EDI depends on the sophistication of your systems and your EDI software. If you have internal purchasing/order entry systems, you will need interface programs that can extract and insert data out of and into these systems. EDI programs that interface with your internal systems are preferred over software that requires re-keying of data. Embassy Software specializes in seemless interface between EDI and your back office systems. Using a purchase order as an example of a business document your customer would send that PO electronically (850) to you. It could be sent either through a VAN (Value Added Network) or through an FTP server. You would take that 850 and convert it either into and ODBC database, a flat file or XML document to be imported into your Order System with the use of EDI Software such as PassportXchange.. Using EDI communication software, which is part of the PassportXchange package you would pull down data at set intervals from the VAN or FTP. These documents are then processed through EDI translation software and output to our order entry system. Finally, an EDI document called a functional acknowledgment (997) is sent to your customer.
check this.
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://www.sapgenie.com/sapedi/index.htm
http://help.sap.com/saphelp_nw04/helpdata/en/72/c18ee5546a11d182cc0000e829fbfe/frameset.htm
https://www.2020software.com/products/Fourth_Shift_Edition_for_SAP_Business_One_Electronic_Data_Interchange.asp
http://downloads-zdnet.com.com/SoftwareandWebDevelopment/SoftwareDevelopmentTools/ElectronicData+Interchange/
http://www.erpgenie.com/sapedi/index.htm
http://www.kostal.com/english/downloads/EDI_AGB_eng.pdfd
ALE
Application Linking and Enabling (ALE)
In this document you will learn the step-by-step procedure to setup the ALE system and go through a transaction between two clients
For our purpose we have two clients
namely Client 100 and Client 200.
System name is SAPKDC (FOR BOTH 100 AND 200 CLIENTS).
Distribution of Material Master Data Between two Systems
1) SETUP LOGICAL SYSTEM: (Note: Do Not Create This Step)
To do this follow the following steps
Execute SALE Transaction Code
On The Screen Click on Sending and Receiving Systems.
Then Click on Logical Systems.
Then Click Defining Logical Systems.
Click New Entries Button
(E.g. (LG100 sending system)
(LG200 receiving system))
Enter two logical system names and their description.
Save
Comeback to SALE Transaction Code screen.
2) Now you have to allocate the created logical systems to respective clients.( Note: Do Not Create This Step)
LG100 assign to client 100
LG200 assign to client 200
To do this, do the following.
Click Assigning Client to Logical System.
Ignore the message that comes up on the screen.
Select client 100
Click details button on the toolbar icon or press F2.
In the logical system box, enter LG100.
Click on the save Icon
Click the back button.
Now select client 200.
Click details icon or press f2.
In logical Systems box, enter LG200.
Save
Back.
Comeback to SALE Transaction Code screen.
3) Maintain RFC Destination: (TR.CODE:SM59)
(Note: Do Not Create This Step)
Click Create Button on the Screen
On the Screen Maintain RFC Destination i.e LG200.
Enter LG200 in RFC destination box.
Connection type is 3
Give a description for the RFC destination.
Maintain Technical Settings on Details on Technical Settings tab
Target Host as : SAPKDC (NOTE: Save it as a Host Name)
Maintain Logon Details on Logon/Security tab.
Language: EN.
User: MMUSER200 (This is the logon for dist.)
Client : 200
Password: MM1234.
Save.
Click on create to do the above process for Client 200 in
The client 200 system.
4) Maintain Distribution Model.(BD64). (ABAPer role starts here)
Execute Maintain distribution model directly for
creating the model.
Click on change mode button on App tool bar of the Screen.
Create Model View pushbutton on App tool bar of the Screen.
A pop screen will appear in which you specify
Short text as Distribution for MM Data.
Enter Technical Name as LGMODEL.
Select Model View and Click on Add Message Type Pushbutton on App toolbar of the Screen.
A popup screen will appear in which you specify
Model View as LGMODEL.
Sender as LG100.
Receiver as LG200.
Again Click on Add Message Type Pushbutton on App toolbar of the Screen.
A popup screen will appear in which you specify
Model View as LGMODEL.
Sender as LG200.
Receiver as LG100.
SAVE.
On the same screen goto Menubar and select Environment.
And then select Generate Partner Profiles , then execute it.
On the Screen specify the Logical System as LG200.
Then execute the screen.
Click back.
Again On the same screen goto Menubar and select EDIT.
Again select Model View and then select Distribute.
****LOGIN to client 200.
Execute Tr.code BD64 and again On the same screen goto Menubar and select Environment.
And then select Generate Partner Profiles , then execute it.
On the Screen specify the Model View as LGMODEL
And Specify the Logical System as LG100.
Then execute the screen.
Click back.
*******Switch back to client 100 Session.
5) Create Material using MM03 Tr.Code.
Enter the material name as LGMATERIAL
Industry sector as Mechanical Engineering
Material Type as Finished Products.
And then Click on Data Pushbutton on the App tool bar.
Select views.
In the select views box for materials check basic data 1 AND 2.
Click enter icon.
In the next screen that you get
Give the text of the material as NEW MATERIAL.
Base unit of measure as KG.
Gross Weight as 200.
Net Weight as 100.
Weight Unit as KG.
In the description area language (E) and material description.
Click Save.
Now I Created a Material in Client 100 , I want to transfer this data to Client 200.
6) Execute BD10 to transfer the material in which you specify
the material as LGMATERIAL and
message type as MATMAS (client100).
Then a Screen will be displayed in which it shows that
1 Master Idoc Generated .. Enter
1 Communication Idoc Generated..Enter.
*******LOGIN to Client 200.
7) Execute BD11 to get the material in which you specify
the material as LGMATERIAL and
message type as MATMAS (client200).
8) Execute Tr.code MM03 and give the material as LGMATERIAL
and see that the material is displayed as it was in Client 100.
If not follow these steps.
9) Execute Tr.code WE19( for rectification of errors in client200).
Specify the Existing Idoc Number and Executes it .
A Screen is displayed in which you specify the corresponding Function Module as INPUT_IDOC_MATMAS01 and execute it.
10) Execute Tr.code MM03 and give the material as LGMATERIAL
and see that the material is displayed as it was in Client 100.
Now the Material is correctly displayed in Client 200.
11) Monitoring of IDOCS.
Transaction Codes:
IDOC Display of Status: WE 05.
IDOC Date and Time: WE07.
Outbound:
Step 1. Application document is created when transaction is saved.
2. Message control is invoked.
3. Messages are processed by system.
4. Messages are Edited (if desired).
5. Output (ALE / EDI) is checked
6. Validate against Message control record from Partner Profile
7. Application Document is saved.
8. Entry NAST table is created for every selected output program
along with Medium & Timing.
9. Check for Process Immediately .
If (yes)
Determine Processing Program from TNAPR Table.
ELSE
Execute RSNASTED Program.
10. Read Partner Profile to determine Process Code.
11. Process Code points to the Function Module & Invoked.
12. IDoc is generated.
13. Check for ALE Request.
if (Yes)
Perform Filters, Conversions, Version Changes etc.
Else.
IDoc is stored in DATABASE.
INBOUND:
Step 1. EDI Subsystem creates an IDoc file from EDI Messages
2. Subsystem calls Functional Module EDI_DATA_INCOMING from startRFC program.
3. Data in Control Record is validate against the Partner Profile.
4. IDoc is generated in Database and syntax check is carried out.
5. IDoc file is deleted once file read.
6. Event PROCESSSTATE REACHED is triggered in Idoc Object Workflow.
7. Check for Process Immediately.
If NO
Execute RBDAPP01 Program
Else
Read Process Code from Partner Profile
Process Code Points to Function Module
Application Document Posted.
further help:
check url
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/ale/configuration.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapdevelopment.co.uk/training
And also u can get lots of inof from the below link.
http://www.sapgenie.com/ale/why_ale.htm
Regards -
Would you like to send me some Document about ALE EDI IDOC
hi experts:
I am learning about ALE,EDI,IDOC,would you like to send me some Document about ALE EDI IDOC?which can include the details of Steps,best it can have the Pictures,thanks a lot.Hi Niel,
There may be a problem with the definition of the rule to delete the characteristic. If you go to transaction RSMRT
and use the 'check' option to check the rule you created are there any errors for the check?
If not when you get the error message that you mention is there any additional error messages created in sm21
or dumps in ST22?
If not there may be a problem with the consistency of the cube if you goto RSRV>All Elementary tests>Transaction data
and run these tests for the cubes are there any error messages? If yes please try to use the repair function in RSRV
to correct any errors.
If none of the above helps you should delete the run you created, make a dummy change to the cube (e.g add a '.'
to the description of the cube, save the change and then activate the cube, please then try and create the
remodelling rule again.
Best Regards,
Des. -
Hi,
can anybody help me, i need a doument on ALE & EDI for ECC6.0, because those steps looking diffrent for 4.7 to ECC6.0.
Regards,
Sivakumar.Hi Alex,
Please follow the like hope this help you
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b7eab546-0d01-0010-d2bf-db6071ada2e2;jsessionid=(J2EE3417700)ID0246380350DB10595759393207384100End
Regards,
Pankaj -
HI ALL,
CAN YOU TELL ME A BRIEF ABOUT ALE, EDI, WAS, BSP, BAPI AS IT IS VERY COMMON IN EVERY INTERVIEW ?
REGARDS
RAJARSHIHi Rajarshi,
IDOCS:
IDOCS are intermediary documents which are like CARRIERS of the data
IDOCs are safe to transfer data, but less volume of data. User is not allowed to access (modify) the data like PSA. IDOCs have 3 parts.
1. Control Record - SOURCE & TARGET details,
2. Data Record - Here comes your query....
Info IDOC - It contains all the technical details related to the data load i.e. Request NO, No of Data Packages, USER, DATE, TIME, LOGICAL SYSTEM, etc. Info IDOC is also ONE segment, the 1 sr segment.
Here data will not be there.
Data IDOC - These are the ones which hold the data. The total no of records are made into Data IDOCs i.e. if 99 records are there then 99 Data IDOCs will be there and all these will be divided into 99 segments.
Hence the total number of Segments in IDOC is 100.
Info IDOC + Data IDOCs = Total no of Segments
1 + 99 = 100.
3. Status Record - Here the status of the data transfer will be available.
ALE:
ALE is Application linking & Enabling which enables to interface SAP with other modules
Pl go through below links as they provide all the required info on ALE & IDOC's:
ALE / IDOC:
Please check this online document for ALE and IDoc.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEIO/BCMIDALEIO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEPRO/BCMIDALEPRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEQS/CABFAALEQS.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDISC/CAEDISCAP_STC.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDI/CAEDI.pdf
Also check this links for additional information.
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
u will have enough material from above .....
Mostly SD consultant doesnt deal with EDI, Idocs but its always good to have knowledge,
EDI
EDI concept in SD: the EDI concept is intended to realize the sales and distribution process completely automatically with the help of electronical documents. These documents are sent from one customer to another, are processed mostly on the background and give a possibility to realize the sales process extremely efficiently.
If MM-customer would like to purchase the goods then he creates the IDOC of type ORDERS and send it to SD-customer. On the SD-side the IDOC is processed via the function module IDOC_INPUT_ORDERS and creates the sales order. As confirmation the SD-side can send to MM-side the Order-Response IDOC (function IDOC_OUTPUT_ORDERS). The MM-customer can every time send a change to the existing order, then on SD side the ORDCHG IDOC will be processed. It can change the order like in VA02. The creation of the invoice can be made via IDOC of message type INVOIC (function IDOC_OUTPUT_INVOIC).
So, the process can be realized completely automatically between SD and MM partners with the help of IDOCs: ORDERS, ORDCHG, ORDRSP, and INVOIC.
That's all concerning the SD-EDI.
Additional processes in SD, where EDI are used:
1) application of delivery schedules to the scheduling agreement: IDOC of type DELINS
2) creation of a delivery order to the scheduling agreement: IDOC of type DELORD
3) creation of external agent service delivery to scheduling agreement: IDOC of type EDLNOT
4) creation of credit advice / credit memo in the frames of self-billing: IDOCs of type GSVERF, SBWAP and for external invoice creation SBINV.
It is all processes which are realized in the SD module via EDI.
Go through this, You will get better idea on EDI,ALE,IDOCS
The interface concept of the classic R/3 is based on two different strategies: Remote Function Calls (RFC) and data exchange through IDoc message documents. RFC makes direct and synchronous calls of a program in the remote system. If the caller is an external program it will call an RFC-enabled function in R/3 and if the calling program is the R/3 system it will call an RFC-function in another R/3-system or it will call a non-R/3 program through a gateway-proxy (usually rfcexec.exe). BAPIs are a subset of the RFC-enabled function modules, especially designed as Application Programming Interface (API) to the SAP business object, or in other words: are function modules officially released by SAP to be called from external programs.
IDocs are text encoded documents with a rigid structure that are used to exchange data between R/3 and a foreign system. Instead of calling a program in the destination system directly, the data is first packed into an IDoc and then sent to the receiving system, where it is analyzed and properly processed. Therefore an IDoc data exchange is always an asynchronous process. The significant difference between simple RFC-calls and IDoc data exchange is the fact, that every action performed on IDocs are protocolled by R/3 and IDocs can be reprocessed if an error occurred in one of the message steps.
While IDocs have to be understood as a data exchange protocol, EDI and ALE are typical use cases for IDocs. R/3 uses IDocs for both EDI and ALE to deliver data to the receiving system. ALE is basically the scheduling mechanism that defines when and between which partners and what kind of data will be exchanged on a regular or event triggered basis. Such a set-up is called an ALE-scenario.
The philosophical difference between EDI and ALE can be pinned as follows: If we send data to an external partner, we generally speak of EDI, while ALE is a mechanism to reliable replicate data between trusting systems to store a redundant copy of the IDoc data. The difference is made clear, when we think of a purchase order that is sent as an IDoc. If we send the purchase order to a supplier then the supplier will store the purchase order as a sales order. However, if we send the purchase order via ALE to another R/3 system, then the receiving system will store the purchase order also as a purchase order.
BAPI:
BAPI (Business Application Programming Interface) is a set of interfaces to object-oriented programming methods that enable a programmer to integrate third-party software into the proprietary R/3 product from SAP. For specific business tasks such as uploading transactional data, BAPIs are implemented and stored in the R/3 system as remote function call (RFC) modules.
BAPIs (Business Application Programming Interfaces) are the
standard SAP interfaces. They play an important role in the
technical integration and in the exchange of business data
between SAP components, and between SAP and non-SAP
components. BAPIs enable you to integrate these components
and are therefore an important part of developing
integration scenarios where multiple components are
connected to each other, either on a local network or on the Internet.
BAPIs allow integration at the business level, not the
technical level. This provides for greater stability of the
linkage and independence from the underlying communication
technology
http://www.erpgenie.com/sap/abap/bapi/example.htm
http://www.sap-img.com/bapi.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e0/9eb2370f9cbe68e10000009b38f8cf/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/43/b46c1e53c111d395fa00a0c94260a5/content.htm
http://www.sappoint.com/abap/bapiintro.pdf#search=%22BAPI(SAP)%22
http://www.erpgenie.com/sap/abap/bapi/index.htm
http://www.erpgenie.com/sap/abap/bapi/conventions.htm
http://www.erpgenie.com/sapgenie/docs/BAPI%20Programming.doc
http://64.233.167.104/custom?q=cache:eyMZ5qPOH-0J:www.erpgenie.com/sapgenie/docs/BAPI%2520Intro.doc+bapi&hl=en&ct=clnk&cd=6&ie=UTF-8&client=pub-2723892367221695
http://64.233.167.104/custom?q=cache:c7cwsXMxq-UJ:www.sapdevelopment.co.uk/java/jco/bapi_jco.pdf+bapi&hl=en&ct=clnk&cd=1&ie=UTF-8&client=pub-6389415953938571
List of all bapis
http://www.planetsap.com/LIST_ALL_BAPIs.htm
FOR BAPI's
http://www.sappoint.com/abap/bapiintro.pdf
Please Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula -
Hi Friends,
Please send me some good documents on ALE,EDI and IDOCs.
Some step by step documents and documents related to all the related transactions will be most welcome.
Mukesh KumarHello,
I have created a customised IDOC scemnario and have a document designed by me with all the minute steps and with screen shots.
Please have a look at http://www.geocities.com/xplosion78/customised_ALE_IDOC_BY_SACHIN_DABHADE.zip
Please reward points if useful.
thnx
Link for that is:
http://www.erpgenie.com/sap/ale/whitepaper.htm
==============================
Other helpful links
http://www.sapgenie.com/whitepapers/ale.htm
http://www.sapgenie.com/ale/index.htm
http://www.sappoint.com/abap.html
http://www.sapbrain.com/TUTORIALS/TECHNICAL/ALE_tutorial.html
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEIO/BCMIDALEIO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEPRO/BCMIDALEPRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEQS/CABFAALEQS.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEHR/CABFAALEHR_ALE_QS.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/ECPCA/ECPCA_ALE_154.pdf
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
Please reward points if useful.
thnx -
hi all,
I am in confusion here.
I want to know when to use which from this three (ALE,EDI,BAPI).
when to use ALE ? why ?
when to use EDI ? why ?
when to use BAPI ? why ?
Thanks in advance.
regards
RajHi
BAPIs (Business Application Programming Interfaces) are the standard SAP interfaces. They play an important role in the technical integration and in the exchange of business data between SAP components, and between SAP and non-SAP components. BAPIs enable you to integrate these components and are therefore an important part of developing integration scenarios where multiple components are connected to each other, either on a local network or on the Internet.
BAPIs allow integration at the business level, not the technical level. This provides for greater stability of the linkage and independence from the underlying communication technology.
BAPI is a Remote enabled function module.
Just follow this simple procedure or steps to create a BAPI.
1. Defining BAPI Data structures in SE11
2. Program a RFC enabled BAPI function module for each method
3. Create a Business object for the BAPI in the BOR
4. Documentation the BAPI
5. Generate ALE interface for asynchronous BAPIs
6. Generate and release
IDocs are text encoded documents with a rigid structure that are used to exchange data between R/3 and a foreign system. Instead of calling a program in the destination system directly, the data is first packed into an IDoc and then sent to the receiving system, where it is analyzed and properly processed. Therefore an IDoc data exchange is always an
asynchronous process. The significant difference between simple RFC-calls and IDoc data exchange is the fact, that every action performed on IDocs are protocolled by R/3 and IDocs can be reprocessed if an error occurred in one of the message steps.
While IDocs have to be understood as a data exchange protocol, EDI and ALE are typical use cases for IDocs. R/3 uses IDocs for both EDI and ALE to deliver data to the receiving system. ALE is basically the scheduling mechanism that defines when and between which partners and what kind of data will be exchanged on a regular or event triggered basis. Such a set-up is called an ALE-scenario.
There are basically two types of IDOCs.
Basic IDOCs
Extended IDOCs
Idoc Components
Basic Idoc
Basic IDOC type defines the structure and format of the business document that is to be exchanged between two systems.
Extension Idoc
Extending the functionality by adding more segments to existing Basic IDOCs.
ALE
check url
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/ale/configuration.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapdevelopment.co.uk/training
And also u can get lots of inof from the below link.
http://www.sapgenie.com/ale/why_ale.htm
EDI
http://help.sap.com/saphelp_nw04/helpdata/en/72/c18ee5546a11d182cc0000e829fbfe/frameset.htm
https://www.2020software.com/products/Fourth_Shift_Edition_for_SAP_Business_One_Electronic_Data_Interchange.asp
http://downloads-zdnet.com.com/SoftwareandWebDevelopment/SoftwareDevelopmentTools/ElectronicData+Interchange/
http://www.erpgenie.com/sapedi/index.htm
http://www.kostal.com/english/downloads/EDI_AGB_eng.pdfd
Data Creation in Idoc
IDocs are text encoded documents with a rigid structure that are used to exchange data between R/3 and a foreign system. Instead of calling a program in the destination system directly, the data is first packed into an IDoc and then sent to the receiving system, where it is analyzed and properly processed. Therefore an IDoc data exchange is always an
asynchronous process. The significant difference between simple RFC-calls and IDoc data exchange is the fact, that every action performed on IDocs are protocolled by R/3 and IDocs can be reprocessed if an error occurred in one of the message steps.
While IDocs have to be understood as a data exchange protocol, EDI and ALE are typical use cases for IDocs. R/3 uses IDocs for both EDI and ALE to deliver data to the receiving system. ALE is basically the scheduling mechanism that defines when and between which partners and what kind of data will be exchanged on a regular or event triggered basis. Such a set-up is called an ALE-scenario.
IDoc is a intermediate document to exchange data between two SAP Systems.
*IDocs are structured ASCII files (or a virtual equivalent).
*Electronic Interchange Document
*They are the file format used by SAP R/3 to exchange data with foreign systems.
*Data Is transmitted in ASCII format, i.e. human readable form
*IDocs exchange messages
*IDocs are used like classical interface files
IDOC types are templates for specific message types depending on what is the business document, you want to exchange.
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
FOr testing you can use WE19.
How to create idoc?
*WE30 - you can create a IDOC type
For more information in details on the same along with the examples can be viewed on:
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400404
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
http://www.sappoint.com/presentation.html
http://www.allsaplinks.com/idoc_search.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://www.erpgenie.com/sapedi/idoc_abap.htm
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30 )
Create Message Type ( WE81 )
Assign Idoc Type to Message Type ( WE82 )
Creating a Segment
Go to transaction code WE31
Enter the name for your segment type and click on the Create icon
Type the short text
Enter the variable names and data elements
Save it and go back
Go to Edit -> Set Release
Follow steps to create more number of segments
Create IDOC Type
Go to transaction code WE30
Enter the Object Name, select Basic type and click Create icon
Select the create new option and enter a description for your basic IDOC type and press enter
Select the IDOC Name and click Create icon
The system prompts us to enter a segment type and its attributes
Choose the appropriate values and press Enter
The system transfers the name of the segment type to the IDOC editor.
Follow these steps to add more number of segments to Parent or as Parent-child relation
Save it and go back
Go to Edit -> Set release
Create Message Type
Go to transaction code WE81
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter
Click New Entries to create new Message Type
Fill details
Save it and go back
Assign Message Type to IDoc Type
Go to transaction code WE82
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter.
Click New Entries to create new Message Type.
Fill details
Save it and go back
Check these out..
Re: How to create IDOC
Check below link. It will give the step by step procedure for IDOC creation.
http://www.supinfo-projects.com/cn/2005/idocs_en/2/
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs
go trough these links.
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
An IDoc is simply a data container that is used to exchange information between any two processes that can understand the syntax and semantics of the data...
1.IDOCs are stored in the database. In the SAP system, IDOCs are stored in database tables.
2.IDOCs are independent of the sending and receiving systems.
3.IDOCs are independent of the direction of data exchange.
The two available process for IDOCs are
Outbound Process
Inbound Process
AND There are basically two types of IDOCs.
Basic IDOCs
Basic IDOC type defines the structure and format of the business document that is to be exchanged between two systems.
Extended IDOCs
Extending the functionality by adding more segments to existing Basic IDOCs.
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30)
Create Message Type ( WE81)
Assign Idoc Type to Message Type ( WE82)
imp links
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
www.sappoint.com
--here u can find the ppts and basic seetings for ALE
http://sappoint.com/presentation.html
www.sapgenie.com
http://www.sapgenie.com/ale/index.htm
<b>Reward points for useful Answers</b>
Regards
Anji -
hi SAP gurus
can u send me steps on ALE,EDI and IDOC s
[email protected]
points will be rewardedHi,
ALE and IDOC:
ALE stands for Application Link Enabling and is used for distribution of data. IDOC is an Intermediate Document. It carries the application data from one server to another server.It uses the RFC(Remote Function call) .
IDocs are text encoded documents with a rigid structure that are used to exchange data between R/3 and a foreign system. Instead of calling a program in the destination system directly, the data is first packed into an IDoc and then sent to the receiving system, where it is analyzed and properly processed. Therefore an IDoc data exchange is always an asynchronous process. The significant difference between simple RFC-calls and IDoc data exchange is the fact, that every action performed on IDocs are protocolled by R/3 and IDocs can be reprocessed if an error occurred in one of the message steps.
While IDocs have to be understood as a data exchange protocol, EDI and ALE are typical use cases for IDocs. R/3 uses IDocs for both EDI and ALE to deliver data to the receiving system. ALE is basically the scheduling mechanism that defines when and between which partners and what kind of data will be exchanged on a regular or event triggered basis. Such a set-up is called an ALE-scenario.
It is the the combination of Segements.
Segment : All the required fields will get assigned in relavant segement.Like that we will have lot of segments.We will assign all the segments to IDOC type.In the required level(Parent & child level .Like tree nodes).
Idocs Type is a Structure by lot of segments.
IDOC is generared at the time of run time .
It will have the data.
There are basically two types of IDOCs.
Basic IDOCs : Basic IDOC type defines the structure and format of the business document that is to be exchanged between two systems.
Extended IDOCs : Extending the functionality by adding more segments to existing Basic IDOCs.
http://www.allsaplinks.com/idoc_sample.html
http://www.allsaplinks.com/
http://www.sap-img.com/
http://www.sappoint.com/abap.html
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEIO/BCMIDALEIO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEPRO/BCMIDALEPRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEQS/CABFAALEQS.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDISC/CAEDISCAP_STC.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDI/CAEDI.pdf
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://expertanswercenter.techtarget.com/eac/knowledgebaseCategory/0,295197,sid63_tax296858_idx0_off50,00.html
http://sap.ittoolbox.com/documents/popular-q-and-a/extending-a-basic-idoc-type-2358
http://help.sap.com/saphelp_47x200/helpdata/en/dc/6b7eee43d711d1893e0000e8323c4f/frameset.htm
Need info on automatic determination of tax code at PO
Hope this will help.
Regards,
Naveen. -
hii
What is ALE, EDI and IDOC in SAP??
How its linked with MM??
Explain the above things with example
ThanksHi!
IDOC = Intermediate Document
IDoc or Intermediate Document is a standard SAP document format. IDoc's allow different application systems to be linked via a message-based interface.
For more detailled information look in SAPNET under
http://service.sap.com/EDI
For exapmle in purchasing:
The IDoc message type ORDERS is used to send a purchase order to a vendor.
EDI = Electronic Data Interchange
EDI stands for Electronic Data Interchange, which means that data is electronically transmitted from one system to another. The main requirement of EDI is that the systems of the communicating partners understand each other. Usually, the data from one partner gets mapped into the format of the other partner and vice versa.
Supporting this there exist EDI standards (named EDIFACT, ANSIX12, ODETTE, VDA, TRADACOMS, SPEC2000, ...), where the data formatting for exchanging documents are specified. Normally the partners agree using a special standard message (for example EDIFACT message ORDERS for a purchase order).
In the SAP system the outgoing data are stored in IDoc format. When processing a receiving document, the Inbound SAP system receives the data in IDoc format too.
Further processing (converting/mapping from IDoc in another format and vice versa) depends on the partner agreement:
If the partners have agreed using a special EDI standard, mapping between IDoc and the EDI standard is necessary. This mapping is not supported by SAP, external converters or EDI subsystems must be installed by the customers for this purpose.
If both systems use SAP software, there is usually no need for mapping (which can save users a lot of money). The two systems are often connected via ALE (Application Link Enabling).
If partners are using XML, the SAP Business Connector can be used. The business connector is a tool used to help customers connect via EDI. It includes routing and mapping and is XML compatible. To read more about XML at SAP go to SAPNet Alias 'XML' (http://intranet.sap.com/XML).
For example:
Vendor can send the invoice by EDI creating an IDoc with message type INVOIC using IDoc Type INVOICxx. He can determine (depending on the partner agreement) how to create an IDoc for Inbound processing with FI or MM-IV.
ALE = Application Link Enabling
ALE is short for Application Link Enabling. Special Basic programs support this functionaliity (see documentation of BC_MID_ALE).
To link applications you have to configure an ALE model. It contains all relevant data about how a system's configuration (normally a central system and assigned local systems) exchange data.
With help of the ALE technology, the distribution of contracts is possible in MM via the following business process:
Contracts that a central purchasing organization distributes to local purchasing organizations to allow the latter to utilize the more favorable conditions they contain for the procurement of materials or external services.Each local purchasing organization sends information on its own release orders back to the central purchasing organization.
For this purpose the contract in the central system can be copied to the local systems (with message BLAORD and COND_A). When a release order to a distributed contract is created in a local system, the release docu is automatically sent to the central system (with message BLAREL) updating the release docu of the contract in the central system.
Precondition for this scenario is, that in all systems the used master data (material, vendor, sources of supply, ...) are the same. This master data can be distributed by ALE, which should be done before sending the contract from the central system. Available message types for distribution of master data are:
MATMAS (ARTMAS in retail system) for material master
CREMAS for Vendor master
INFREC for info record
SRCLST for source list
COND_A for conditions of info record
SRVMAS for service master data
Technical documentation to ALE can be found by path:
Basis Components / Middleware (BC-MID) / Application Link Enabling (BC-MID-ALE)
The most important Transactions for testing Idoc:
WE02 Display IDOC
WE05 IDOC list
WE19 Testing IDOCs
BD87 Status Monitor for ALE Messages (reprocess)
Notes:
456127 FAQ: Electronic Data Interchange (EDI) in Purchasing
536411 Sample scenario for ALE contract distribution (only internally released)
I hope I could help you fruther
Best regards
Erika -
Learning map - XI, ALE, EDI, IDOC
Hi all!
I´m trying studying IDOC but it´s complicated. I found many documents talking about EDI, ALE and XI.
I don´t know many things about EDI, ALE and XI. So, my question is: Have i to start studying about this topics (ALE, EDI and XI)?? I think that i need understand this terms for after to learn IDOC.
If the answer is YES, wich one should be first one?
Somebody has any document or link about this topics? I lookup in SDN Articles and Blogs but i didn´t find anything.
Thanks a lot!Hi,
Please go through following Link,
https://wiki.sdn.sap.com/wiki/display/ABAP/ALE%2CIDOC
https://wiki.sdn.sap.com/wiki/display/ABAP/ALE+IDOCS
https://wiki.sdn.sap.com/wiki/display/ABAP/ALE%2CIDOC
Thanks & Regards,
ShreeMohan -
Hi,
I have a question from long time. What is the difference between ALE & EDI.When I ask my friends They say in simple way. SAP - SAP (ALE) . SAP - NON SAP (EDI).
Today I read in a book .ALE/IDOC method can be used to connect to SAP - NON SAP (LEGACY). Now I am more confussed .
If any one can explain me the real difference I really appreciate the time.
Thanks,
AndyHi Andy,
I am just sharing a few lines which i read some where. Hope that would be helpful.
ALE(Application Link Enabling) refers to the losely coupled systems whereas the EDI speaks about the Electronic Document Exchange. We need to enable ALE in order to use the EDI feature. ALE builds the bridge and EDI is the means by which the data moves in and out of the SAP system just like vehicles moving over the bridge. IDOC(Intermediate Documents) are the data containers which will be moving in and out of SAP carrying data.
Thus summarising we need to establish ALE between the systems in order to use EDI between them. In case we need to use EDI between SAP and some other target system then we need a EDI subsystem which understands these IDOCs and converts into the format understood by the target system.
Hope this is useful.
Regards,
Pooja -
Hello...
While setting Partner Profile when I am assigning the process code & FM Name it giving me the following error
Application object type is not planned
Message no. B1405
Diagnosis
The application object type '' is not permissible for the input function module 'Z_IDOC_INPUT_ZORDER01'.
Something wrong with the FM I guess.... Some setting I am missing...
Let me tell What all I have done....
(1) WE30
(2) WE81 - Message Type
(3) BD59 - Object Type
(4) WE57 - Linking Message type to FM
(5) BD51 - FM settings
(6) WE20 - Partner Profile....
On step six its giving the above error....
Please Guide how to resolve this issue....
Thanks & Warm Regards
Ankur JainHai Ankur
check the following Links
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
ALE and IDOCs
iDocs
IDOCs !!!!!! need your help
idocs
ALE, EDI and IDOCS
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
ALE---IDOC Creation Steps
01 Error --> Idoc Added
30 Error --> Idoc ready for dispatch(ALE Service)
then goto SE38 --> Execute the Program RBDMIDOC
29 Error --> ALE Service Layer
then goto SE38 --> Execute the Program RSEOUT00
03 Error --> Data Passed to Port ok
then goto SE38 --> Execute the Program RBDMOIND
12 Error --> Dispatch ok
Inbound Status Codes
50 Error --> It will go for ALE Service Layer
56 Error --> Idoc with Errors added
51 Error --> Application Document not posted
65 Error --> Error in ALE Service Layer
for 51 or 56 Errors do the following steps
goto WE19 > give the IDOC Number and Execute>
Press on Inbound function Module
for 65 Error --> goto SE38 --> Execute the Program RBDAPP01 then your getting 51 Error
ALE IDOC
Sending System(Outbound ALE Process)
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Create Model View
Tcode BD82 ? Generate partner Profiles & Create Ports
Tcode BD64 ? Distribute the Model view
Message Type MATMAS
Tcode BD10 ? Send Material Data
Tcode WE05 ? Idoc List for watching any Errors
Receiving System(Inbound ALE )
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 ? Idoc List for inbound status codes
ALE IDOC Steps
Sending System(Outbound ALE Process)
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Create Model View
Tcode BD82 !V Generate partner Profiles & Create Ports
Tcode BD64 !V Distribute the Model view
This is Receiving system Settings
Receiving System(Inbound ALE )
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 !V Idoc List for inbound status codes
Message Type MATMAS
Tcode BD10 !V Send Material Data
Tcode WE05 !V Idoc List for watching any Errors
1)a Goto Tcode SALE
Click on Sending & Receiving Systems-->Select Logical Systems
Here Define Logical Systems---> Click on Execute Button
go for new entries
1) System Name : ERP000
Description : Sending System
2) System Name : ERP800
Description : Receiving System
press Enter & Save
it will ask Request
if you want new request create new Request orpress continue for transfering the objects
B) goto Tcode SALE
Select Assign Client to Logical Systems-->Execute
000--> Double click on this
Give the following Information
Client : ERP 000
City :
Logical System
Currency
Client role
Save this Data
Step 2) For RFC Creation
Goto Tcode SM59-->Select R/3 Connects
Click on Create Button
RFC Destination Name should be same as partner's logical system name and case sensitive to create the ports automatically while generating the partner profiles
give the information for required fields
RFC Destination : ERP800
Connection type: 3
Description
Target Host : ERP000
System No:000
lan : EN
Client : 800
User : Login User Name
Password:
save this & Test it & RemortLogin
3)
Goto Tcode BD64 -- click on Change mode button
click on create moduleview
short text : xxxxxxxxxxxxxx
Technical Neme : MODEL_ALV
save this & Press ok
select your just created modelview Name :'MODEL_ALV'.
goto add message type
Model Name : MODEL_ALV
sender : ERP000
Receiver : ERP800
Message type :MATMAS
save & Press Enter
4) Goto Tcode BD82
Give Model View : MODEL_ALV
Partner system : ERP800
execute this by press F8 Button
it will gives you sending system port No :A000000015(Like)
5) Goto Tcode BD64
seelct the modelview
goto >edit>modelview-->distribute
press ok & Press enter
6)goto Tcode : BD10 for Material sending
Material : mat_001
Message Type : MATMAS
Logical System : ERP800
and Execute
7)goto Tcode : BD11 for Material Receiving
Material : mat_001
Message Type : MATMAS
and Execute --> 1 request idoc created for message type Matmas
press enter
Here Master Idoc set for Messge type MATMAS-->press Enter
1 Communication Idoc generated for Message Type
this is your IDOC
Thanks & regards
Sreenivasulu P -
Hello,
Tell me exact difference between ALE and EDI in Idoc's.which is used for sap to sap and sap to non-sap.The diff betn EDI and ale can be as follow,
1) ALE = Application Link Enable: Initially developed for SAP as an abstract layer to extract master and transactional data to be sent ellectronically to other SAP systems. These days is also being used to send data no non-SAP systems. ALE is not a protocol or anything like that, it's just abstract layer composed by a set of applications which are capable of extracting aplication data on a 1-time basis or periodically, by selection criteria or incrementally by deltas.
2) In contrast, EDI = Electronic data interface, this is a comunication protocol not designed by SAP but it´s an industry standard. Of course most SAP software supports EDI, but EDI it's no software but the specification of the protocol in itself
Check the link below:
ALE:
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217e1c51ce11d189570000e829fbbd/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDI/CAEDI.pdf
Please check this online document for ALE and IDoc.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEIO/BCMIDALEIO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEPRO/BCMIDALEPRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEQS/CABFAALEQS.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDISC/CAEDISCAP_STC.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDI/CAEDI.pdf
Also check this links for additional information.
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
IDOCS
http://idocs.de/www5/books/IDocBook/IDOCS_CHAP09-11.pdf
http://idocs.de/cookbooks/idoc/cb12_idoc_20_outbound/idoc_outbound_45_rsnast00/docu.htm
IDOC / ALE Blogs
/people/raja.thangamani/blog/2007/07/19/troubleshooting-of-ale-process
/people/kevin.wilson2/blog/2006/11/13/ale-scenario-development-guide
EDI:
Advanced guide to EDI configuration
http://www.erpgenie.com/sapgenie/docs/advanced_guide_to_edi_configuration.doc
EDI Architecture
http://www.cs.jyu.fi/el/tjtl63/Antin_esitys/sld003.htm
Overview of EDI and the IDoc Interface in SAP
http://sap-idoc2edi-consulting.com/pdfFiles/EDI_IDoc_Overview.pdf
How to Build a Basic EDI Interface Using an Imported Schema and Map
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/818a20be-0601-0010-e3b8-ac3d5f975319
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d98675ca-0d01-0010-c5a0-c70389f1a314
EDI Functional Design
http://www.erpgenie.com/sapgenie/docs/interface_function_specification.doc
Thoughts on EDI in an SAP XI Environment
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/135b0b94-0701-0010-f6a9-86a14057544a
Reward points if this helps.
Maybe you are looking for
-
How to preset fields in a transaction BP with default values
Hi! I want to fill few fields in transaction BP with default values. This should be if there`s a new business partner to insert. If i can do this depending on the selected role it was the best First i thought on SPA/GPA-parameters ... but then i can`
-
Hello, I have seen and looked over several different threads on this subject, but I have not yet found a solution that works for me, so I thought I would try myself. I have created a simple image pan for a project I am editing for somebody. I have tr
-
First time using Skype to call
Hello! I live in Fla and I am goint to Brazil. Because this is the first time, I want be sure I will do the right thing: I have skype on my cell phone, i can buy credits to talk with my family and friends in Brazil and USA. I need to be in a place wi
-
Read Queue Manager details from MQMD headers for synchronous communication?
I have a requirement for synchronous messages between MQ and Proxy. MQ being at sender side. The response need to go to a queue which is a clustered queue. the Queue manager name present in the MQMD header of request. PI need to read the MQMD value f
-
Several video transitions are missing in Premiere Pro CC 2014. Where are they?
I recently upgraded to Premiere Pro CC 2014 from Premiere Pro CC. I had been working on a project using several video transitions which were no longer available in Premier Pro CC 2104. I thought maybe they would show up in a later update, but so fa