Documents related to Reports and Analytics
Hello,
Does anyone documents, links, ebooks, tutorials related to Reports and Analytics in CRMOD? If so, please mail to [email protected]
Thanks,
Raghu
The best source of information on this is Mike Lairsons book Oracle CRM on Demand Reporting you can buy it from amazon
Similar Messages
-
Hi
I am unable to access Reports and Analytics . It throws a Error 500 -Internal Server Error when I click on browse catelog button on Reports and Analytics in Fusion
I have all the required roles and also BIADMINISTRATOR ACCESS still I am unable to login to Reports and Analytics. I have cleared the cache also.
My collegue who has the same roles is able to access it.
Regards
AvinashI created the showModule.xhtml in the web.view.module\src\main\resources folder and test the application and Now I'm getting the error in both deployment ways.
a) Local deployment: Same result
Error 500--Internal Server Error
com.sun.faces.context.FacesFileNotFoundException: /showModule.xhtml Not Found in ExternalContext as a Resource
at com.sun.faces.facelets.impl.DefaultFaceletFactory.resolveURL(DefaultFaceletFactory.java:232)
at com.sun.faces.facelets.impl.DefaultFaceletFactory.resolveURL(DefaultFaceletFactory.java:273)
b) Remote server:
Error 500--Internal Server Error
com.sun.faces.context.FacesFileNotFoundException: /showModule.xhtml Not Found in ExternalContext as a Resource
at com.sun.faces.facelets.impl.DefaultFaceletFactory.resolveURL(DefaultFaceletFactory.java:232)
at com.sun.faces.facelets.impl.DefaultFaceletFactory.resolveURL(DefaultFaceletFactory.java:273)
Please check the below screenshots for the mappings captured in the properties window.
http://imageshack.us/photo/my-images/5/srwebviewmodule.png/
http://imageshack.us/photo/my-images/811/eclipseexplorer.png/
http://imageshack.us/photo/my-images/521/cdiandrichfacesear.png/
http://imageshack.us/photo/my-images/90/cdiandrichfaces.png/
Thanks,
Vijaya -
No Dashboard Display under Reports and Analytics - AC 10.0
Hello,
When I try to access the Dashboard reports under Reports and Analytics menu in NWBC, I do not get any display.
Instead, I see something like x at the top left hand corner and it keeps loading indefinately.
I have instead Adobe Flash Player 10.0.....Do I need to install another software (like Crystal Reports) to have this display showing graphs and stuffs?
If yes, what other steps do I need to perform to get this graphical display out?
ThanksHi Hemant,
The user has all authorizations. I have even given the user admin right to the user.
The behavior of the explorer is as if there is a feature that is not activated or installed as it does as if it wants to open...but it now comes out with a cross like sign.
The only requirement I saw in the installation is guide is for adobe flash player which I have since installed. Are you aware of other tools to install to display analytics n reports?
Thanks! -
Hey everyone, just was curious to know what people were doing for analytics for their iTunesU site. Is anyone going above the weekly usage report, or doing anything unique that you might like to share? Thanks
I know the good folks at MacLearning (I'm a lesser light in that group), and in particular Jess Mitchell of Duke University, are looking to do some work in that area. I think we're in the the "thinking stage" just now.
-
Mass Download documents related to BOM and/or BOM items
Hi All,
Is anyone aware of a mass download functionality of all the documents realted to a BOM - i.e all documents items of a BOM and documents attached to BOM items(part numbers).
Thanks
RajHi Mangesh,
Yes, that is exactly it. The requirement is for mass downloading all the original drawings linked to all the components of a BOM to a local drive or to an ftp site.
One possible way , i thought of, could be to use a program DMS_RELOCATE_CONTENT which as I understand relocates all the originals realated to a list of DIRs to another location. Of course, this means that we need compile a list of components related to a BOM using CS12 or similar program and get a list of parts that has drawing attached to it. Subsequently, use this list to compile DMS_RELOCATE_CONTENT. Not sure, if this is a correct way or if there is any other simple way of achieving this.
Thanks
Raj -
Documents related to Reporting
Hi all,
Can anyone please provide me some documents regarding SAP BW reporting.
Thanks in advance,
SekharHi Sekhar,
Check your inbox .
****Assign points if helpful***
Thanks,
Amith -
SmartView Reporting and Anaysis alert
We are trying to write VBA code to refresh a spreadsheet that is a downloaded document using a Reporting and Analysis smartview connection. Everything works fine, but we need to get rid of the "alert" that pops up after the refresh of the document completes. At the end of the refresh it pops up a msgbox that has the number of pages updated. We've tried to set displayalerts = false, but the msgbox still pops up and it stalls because it has to have user input. Has anyone encountered this and/or has a fix to get rid of it?
Thanks!
Edited by: Tsmith2 on Nov 4, 2009 4:17 PMBoth IDM and "show events alert" have very basic querying capabilities. The only thing you can do is to mark some signature with "traits" code and show alerts fired by this signature with:
sensor# sh events alert include-traits ?
<0-15> Traits to include in the show events output.
Try IDS Event Viewer. IEV is a free tool that can be downloaded from the Cisco website. But is very limited too. The primary Cisco product for viewing/reporting is the Cisco MARS. But it is expensive... -
Advantages of segment reporting and document splitting
Hi Experts,
Please provide the advantages of segment reporting and document splitting. and also please share any configuration document relating to this.
Thanks
ChandanaHi!
Segment is a business sub unit for internal reporting purpose. This ensures to give a performance report in terms of money on particular segment. Profit center need segment in their master data. If you want a different segment than profit center segment, you have to implement BAPi with the help of ABAPer to get the derived segment.
Document splitting means to split up the line items for selected dimentions (Ex: Profit Centers, segments etc). You can split up a single line items with multiple line items for desired reporting purpose.
You have to follow certain steps at IMP to configure this. -
Table relations between vbrk and bkpf for Accounting Document Number
hello,
i am using 4 tables to get data into my programs.
vbrk,vbrp konv and bkpf.
i want to get belnr from bkpf.i found relation between vbrk and belnr.but in vbrk table belnr's value is initial.
can anybody tell me that how should i relate vbrk and bkpf or how to get Accounting Document Number(belnr) from bkpf for Billing Document(vbeln).
regards,
soniya s.hi,
chekc this. its working for me.
data : WA_AWKEY LIKE BKPF-AWKEY.
data : WA_BELNR LIKE BKPF-BELNR.
data : LENGTH TYPE I.
*BREAK MTABAP.
LENGTH = STRLEN( IT_VBRK-VBELN ).
if LENGTH = '10' .
MOVE it_vbrk-VBELN TO WA_AWKEY.
SELECT SINGLE BELNR FROM BKPF INTO WA_BELNR
WHERE AWKEY = WA_AWKEY
AND AWTYP = 'VBRK'
and blart = 'RV'.
it_final-acc_doc = WA_BELNR.
CLEAR WA_BELNR .
CLEAR WA_AWKEY .
else.
CONCATENATE '0' it_vbrk-vbeln INTO wa_awkey.
SELECT SINGLE BELNR FROM BKPF INTO WA_BELNR
WHERE AWKEY = WA_AWKEY
AND AWTYP = 'VBRK'
and blart = 'RV'.
it_final-acc_doc = WA_BELNR .
CLEAR WA_BELNR .
CLEAR WA_AWKEY.
endif. -
Visibility of non-SAP reports and documents in the Portal
Hi All,
I am new to the portal forum and need your direction. We have the need for outside users to view static reports and documents not generated by SAP on the portal. Can anyone point me to documentation on how this can be accomplished? We do not have Knowledge Management installed and my research seems to show that KM is the only way, is there another and how can we do it?
Thanks for your help.
PamPam,
How are your reports served? If they are served up by URL, you can create a URL iview back to the source system. If you need to store them in the portal system then you need KM.
jwise -
Templates and document relative linking.
Im trial using DW cs5 and find that if i make a template and then
use that template to make pages it doesnt make document relative links.
Instead it makes links relative to my local drive. ie c/documents/foo.
Even if I have the template file with document relative links, when I make the page it turns into local relative and to upload this to a server wont work.
Am I missing something ?
I can figure it out.
CS4 did this fairly easy.
CheersI dont know how to fix this.
My site is set to relative document linking and the template is linked that way but when I make a new page from template it reverts to local linking.
instead of ../../ images , I get c://documents/ etc.
I dont know whats going on. -
Can any one explain me the relation between BDC and reports events?
hi experts.....
can any one explain me the relation between BDC and reports events? we are using report events in BDC programmes why?\
Is reports events occurs in each and every concept in ABAP i.e creating custom idocs, smart forms, sap scripts, dialog programmes, module pool technics?
thanks in advanceThe forums are expert forums. So the first thing I would do is change your name.
It's like entering a grand prix in a car with a "Student Driver" sign.
Rob -
BW related HR cubes and reports
Hi any one explain me abt the bw related Hr cubes and reports.
If possible please give me example of cubes and reports.
Thanks
MadhaviDear Madhavi,
for HR you have several sub modules are there.. under HR which you want..
here i'm giving;
1. Personnel Administration--- cubes are 1. 0PA_C01
2. 0PAPA_C02
Queries are 0PA_C01_Q001
0PA_C01_Q012
0PA_C01_Q021
0PA_C01_Q011
0PA_C01_Q006
0PA_C01_Q020
0PA_C01_Q019
0PA_C01_Q024
0PA_C01_Q013
0PA_C01_Q015
0PA_C01_Q014
0PA_C01_Q016
0PA_C01_Q002
0PA_C01_Q003
0PA_C01_Q010
0PA_C01_Q022
0PA_C01_Q005
0PA_C01_Q017
0PA_C01_Q007
0PA_C01_Q009
0PA_C01_Q023
0PA_C01_Q018
0PA_C01_Q0101
0PA_C01_Q0102
0PA_C01_Q0103
0PA_C01_Q0104
0PA_C01_Q0110
0PA_C01_Q0111
0PA_C01_Q0112
0PA_C01_Q0113
2. for Recruitment .. -
CUBEs are only one---0PARC_C01
Queries are -- 0PARC_C01_Q002
0PARC_C01_Q008
0PARC_C01_Q016
0PARC_C01_Q006
0PARC_C01_Q003
0PARC_C01_Q015
0PARC_C01_Q007
0PARC_C01_Q017
0PARC_C01_Q004
0PARC_C01_Q005
0PARC_C01_Q009
0PARC_C01_Q001
0PARC_C01_Q010
0PARC_C01_Q011
0PARC_C01_Q012
0PARC_C01_Q013
0PARC_C01_Q014
like this there are several modules are there.. i think it is usefull for you..
thnaks
@jay -
Report related to Health and Safety in SAP
Dear All,
Can you please help me from where i can found the reports related to Health and Safety Reports like
1. No. of Near-Miss Incidents
2. No. of First Aid Cases
3. N. of Medical Cases
4. No. of Lost time Incident
5. No. of Fatal Injuries
6. No. of fire Incident major, Minor
7. No. of Fire drill conducted
8. No. of people trained
9. Man-Hours worked at project
10. No. of PIT drill conducted
11. No. of Trip Drill Conducted
Also help me should i develop these reports or can be found in standard , we are using ECC 6.0
Regards
VivekHello Vivek,
The standard reports for the Incident / Accident Managment are:
S_SH8_84000003 - Display 1000-Employee Quota
S_SH8_84000004 - Display 1,000,000-Hour Quota
S_SH8_84000005 - List Reportable Accidents Without Accident Report
S_SH8_84000006 - Check and Correct Absences in Incident/Accident Log
You can find some of the reprots from you list to be available here.
Otherwise you may require to develop reports.
Request you to go through the topic: Incident/Accident Management Reports in SAP Help. You will find more information about Incident / Accident reports there.
Regards,
Niraj -
Document integration for Bex reports and web reports
Hi,
I would like to attach few documentaion (like business usage of the report) for all existing reports in BW system. We are delivering all reports through Bex reports and Web reports.
Report user should be able to see attached documentation through "Document" property in Web report.
I have followed this way but not able to get on-line documentation for queries.
1. RSA1--> Documents >Meta Data> selected Object type ELEM> Import document> attached word document.
2. I enabled Documents property in Query designer.
3. When I executed this query in Bex, I could see document symbol for all characteristics & Key figures in all cell (in default view)
4. The same result with Web report (all cells are having document symbol).
But I dont want to display documents in defaul view, if any user wanted to have doucment info, then should click on "document" tab and should be able to down load / read on line.
Let me know why I am getting document symbol for all key / char, even though i selected "ELEM". I know we could direclty import documents in query designer, what is the difference..
Rgds..Hi,
Anybody could provide step to step procedure for doucument integration for Bex reports.
Best regards,
Maybe you are looking for
-
Ozzie, you mentioned you fixed this...
Re: Podcasts appear under Music not Podcasts Posted: Jan 5, 2007 12:56 PM in response to: camoracer Click to reply to this topic Reply email Email This was very helpful!! I downloaded a podcast in iTunes AND directly from the source and looked at the
-
Trying to install Leopard on my iMac (G5). Got to the screen that asks for the user name and password and it won't take it. How do I get out of this and resume the software install?
-
Your internet {keep it courteous} is awful.
When I call about a problem I don't want to do the work of a service tech. I pay for the same service as people that have a great connection and speed. You charge for one product while delivering crap. Half the time I can't watch on demand, half the
-
Canon MG6250 - ScanGear not visible in Photoshop CS6 (32/64 bit)
Does anyone know if the scanner in Canon MG6250 is incompatible with the PS CS6? I am running both CS6 32 and 64-bit in Windows 7 64-bit. I can't see ScanGear-driver - I only get connection with WIA, and that driver is not as exciting to work with.
-
How to Access SAP ECC 6.0 using HP model Omni 10 (with windows 8.1) tab
Dear Experts can anybody guide me to access SAP using TAB, where it has windows 8.1 o/s and manufactures are claimed it support all applications. which SAP client version to be loaded in this tab, what are the config steps to be followed etc Kindly r