Documents remain in GenWWW status and conversion error message says success

Hi,
I have instaled UCM 11.1.1.4 and the situation is that documents remains in GenWWW status, the
conversion error message says success . In Ibr logs says everything went perfect, in UCM logs isn't recorded any error.
Anyone have a clue to solve this problem?
Update:
When runnig IdcAnalyse appears the following error:
./IdcAnalyze -filesystem
FileSystemFileStore:1.0.0.0 started.
Content Management System Server. Version 11gR1-11.1.1.4.0-idcprod1-101229T001824
Copyright (C) 1996-2011, Oracle and/or its affiliates. All rights reserved.
Analyzing filesystem...
.....................Error checking filesystem: Unable to locate extension for rendition flag 'L'.
Is this error related with the documents remain in GenWWW?
Thanks
Edited by: carlos.pereira on Jul 26, 2011 4:58 PM
Edited by: carlos.pereira on Jul 26, 2011 5:00 PM

Usually this issue is seen when the IBR's cannot keep up with the load and after a defined amount of time, the refineryjobs entries are cleared while the IBR's might still hold this content item.
If you do what Srinath proposes the refinery jobs is cleared as well as the queues on the IBR. This will not fix the issue with the documents in GenWWW, but it will make the way clear for (new) documents to be (Re-)submitted for conversion. IdcAnalyze should then be able to create a IdcCommand file with resubmit_for_conversion calls for all the documents in GenWWW state. Running this IdcCommand file should then convert all the documents that were "stuck" in GenWWW.

Similar Messages

  • When I try to open a document created in Pages, I get an error message saying "[Document Name" can't be opened."  I don't want to lose hours of work; has anyone else encountered this?

    When I try to open a document created in Pages, I get an error message saying "[Document Name" can't be opened."  I don't want to lose hours of work; has anyone else encountered this?

    A few general trouble shooting tips that may apply here:
    1. If you used Software Update to do the OS update(s) to reach 10.6.7, go to http://support.apple.com/downloads/ and download and apply the Mac OS v10.6.7 Combo Updater. The Combo Updater contains some fixes that were not included in the incremental updaters used by Software Update.
    1a. Check that you have the current version of Pages (and of the other iWork applications) installed. All three applications' current version numbers end in .0.5
    2. A common cause of malfunctioning applications is a corrupted preferences file (.plist file). Your Pages '09's plist is at yourname > Library > Preferences > com.apple.iWork.pages.plist
    Quit Pages, locate the file and Drag it to the Desktop (or to the Trash).
    Restart Pages and attempt to open one of the files.
    If all is well, Trash the plist file and empty the Trash.
    If there's no change, AND you've made changes to the Preferences that you wish to keep, drag the file back to its previous location, replacing any new one that has been created.
    Regards,
    Barry

  • I have been trying to update iTunes 11.1.3 to 11.4 and the error message says "an unexpected error occured. iTunes cannot be installed. Anyone can help

    I have been trying to update iTunes 11.1.3 (8)  to 11.4 and the error message says "an unexpected error occured. iTunes cannot be installed". Anyone can help?
    I have a Mac Book Pro with OS X 10.6.8

    If your profile is correct you are using 10.6.8 Snow Leopard.   The latest iTunes version for that OS is 11.3.1    If your profile is wrong and you have 10.9.5 Mavericks, then the iTunes version is 11.4.    You cannot use Mavericks versions on Snow Leopard.

  • I am downloading the premiere elements 12 file on the adobe page and my error message says the file archive is missing??

    I am downloading the premiere elements 12 file on the adobe page and my error message says the file archive is missing??

    you need the 7z file in addition to the exe
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  12 | 11, 10 | 9,8,7
    Lightroom:  5.6| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • I've tried to install a downloaded version of cs5 master collection using the same serial number i used by installing it with the installation dvds and the error message says it's an invalid serial number

    as my adobe cs 5 master collections keeps having icc profiles and visualization issues, i've tried to reinstall the hole package. my mac book pro dvd reader is broken, so i downloaded from the adobe website a master collection and tried to install it with the serial number i used in the former installation but a error messages says that it's an invalid serial number.
    i've already tried to install from the dvd's in another mac and it worked, with the same serial number, so i'm out of solutions.
    any thoughts that may help me?

    Si precisases de qué lugar de Adobe o de otro sitio has descargado....
    Si indicases el nombre del archivo descargado,....
    Respecto a la instalación, repito la lección de ruta es un paso, que puede pasarse por alto, aunque no sé si la instalación convencional reconoce una red entre varios equipos.
    No hay ningun mensaje que indique que descargas una versión u otra, tampoco hay o sale ningun mensaje cuando instalas un programa en chino, eso si, al introducir el no. de serie (que no es el adquirido para la versión en chino) te dice que no es válido y punto. No más explicaciones.
    Asi que por favor explicanos lo preguntado al rincipio, o vuleve a descargar la versión correcta, en el idioma correcto y desde un lugar oficial de Adobe.
    Creo que Adobe te puede facilitar esa descarga a traves de la web "Licensing" con unas claves que te facilitarán si logras ponerte en contacto directo con ellos en tu país, (que tampoco sabemos cúal es). Suerte.

  • I'm trying to sync/back up my iphone 3GS and the error message says: This iphone cannot be used because Apple Mobile Device service is not started.

    I was trying to back up/sync my iphone 3GS ut the error message says I can't because Apple Mobile Device Service isn't started. I don't know what thisis. Help.

    See Here
    AMDS for Mac
    http://support.apple.com/kb/ht1747
    AMDS for Windows
    http://support.apple.com/kb/TS1567

  • My hp deskjet 9362c will not print in black and white/error message says the printer mode is set at

    can not get my hp deskjet 932c to print in black and white.  error message states print mode in auto, but I can't find the print mode to correct.  printer was printing in black and white or color automatically til last night, then in middle of document quit altogether.  new cartridges get the same results.

    Check the paper type settings.  If this is set to "automatic" and the paper type is detected as photo paper then black only print is not available.  (The black pigmented ink is not compatible with photo paper.)  What is your operating system?
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Error just uninstalled iTunes from PC and reinstalled error message saying registry settings for itunes driver for importing and burning CD's are missing.  May be caused by dowloading other CD burning software. Solution?

    Was having trouble burning CD. Uninstalled iTunes from PC the reinstalled iTunes.  The first installation I got a messaghe saying that download was interrupted.  I restarted te download and completed it.  Then got another error message that a registry file was missing that is used in downloading and burning CD-s.  I figured with a fresh download, it should have been fixed???? Solution anyone and thanks?

    I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
    iTunes for Windows: "Registry settings" warning when opening iTunes

  • Muse crashed and afterwards, error message saying site file damaged and will not open

    I was working on a muse file when it shut down due to "an error". When I tried to open the file again, it told me that the site was damaged and could not be opened. I have a PC and I would like to know if there is any way I can get the file checked out to see if it is recoverable in any way. I have two versions of the file, the original damaged muse file and a gzip file that I got from recovering some of the files.

    Hi,
    This is not a sure sort fix and only if you are comfortable you may try these steps to recover your file :-
    1. First, Create a backup copy of your Muse file and then perform the following steps on the copy.
    2.Change the extension of the file from .muse to .rar.
    4.Open it using the WinRAR application.
    5.Winrar throws a warning stating that you attempted to open damaged archive, you can safely Ignore the warning.
    6.Go to Tools->Repair Archive. This ensures that the archive and hence, the .muse file is repaired.
    7.Change the extension back to .muse.
    This is not a sure sort fix but this sometimes helps in recovering files that have got corrupt due to unexpected crash.
    Regards,
    Rohit Nair

  • What do I do if Netflix won't play and the error message say's "Primetime Content Decryption Module provided by Adobe Systems Inc. plug in has crashed"?

    I've called Netflix twice with the error code F7361-1253 that shows up, to no avail. The first time the guy said it wasn't a Netflix code and didn't know what to do. The second time a different guy said to go to Internet Explorer to see if Netflix would play. Since it did, he said the problem was with Firefox. I have tried updating plug-ins, and refreshing Firefox, but nothing is working.

    I see you're using the Beta version of Firefox. Support for Netflix using the new Primetime Content Decryption Module is not complete in Firefox 38.
    You'll need use Firefox 37 (the current version) with Microsoft Silverlight to watch videos on Netflix.

  • I have my catalog on an external hard drive, trying to open it and the error message saying "lightroom encountered an error when reading from its preview cache and needs to quit" how can i fix this as all my work in in this

    I have let it close down put it keeps appearing

    I assume you know where your catalogue file (the lrcat file) is located. In the same folder is a previews lrdata folder which you should delete or rename in Explorer, then start LR again.
    If I've made incorrect assumptions above, sorry, and we'll go back over it from the start.
    John

  • HT3275 trying to back up on time machine and get error message saying ... sparse bundle is already in use -can't complete backup

    sparse bundle already in use-can't complete backup

    On your iMac....
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click on the Time Capsule icon, then click Edit in the small window that appears
    Click on the Base Station menu at the upper most top of the screen up where the File, Help, etc menus reside
    Click on Restart
    Wait a few minutes and try another backup

  • TS1717 I foolishly downloaded the latest version of iTunes and now it won't run.  I get a message stating that MSVCR.dll is missing and an error message saying error 7 (Windows error 126).  Click on the support link for iPod + iTunes - no support for iTun

    Why won't the latest version of iTunes run?  I've downloaded it twice.  Come to that, why isn't iTunes an option in the product list on this site?  Apple did make that, didn't they?

    Hey Jim Tracy!
    Here is an article that will help you resolve this issue with your iTunes:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

  • HT1414 My child's itouch is locked out.  When I connect to computer, iTunes does not recognize it and the error message says I have to unlock the device?  I can't unlock the device because password is unknown? How do I reset if I don't know the password?

    My child's iPod touch is locked.  No one knows the password.  I have tried connecting to iTunes but since itouch is locked, iTunes will not recognize It.  How do I unlock the itouch?  The hard reset does not work either.

    iOS: Unable to update or restore

  • Itunes won't open after downloading last update. Error message says "not supported by this type of Mac"

    Downloaded latest iTunes update. Now iTunes won't open, and the error message says "You can't open the application iTunes because it is not supported on this type of Mac." I have been using this MAc since 2008. Any suggestions appreciated.

    Welcome to Apple Support Communities
    It's a common problem that some users have after installing the most recent iTunes. Download and install again iTunes 11.0.3 to solve that problem > http://support.apple.com/kb/DL1614

Maybe you are looking for

  • Error in answers while querying the same data

    Hi folks, i posted this question in forums, but found no answer this is Oracle Delivered RPD. in answers - Presentation Columns where when i select a column(Division Name), its shows me Name of the Division Names. if i select the same Presentation Co

  • CCMS configuration for historical data of a new application server

    Out CI & app servers are configured in CCMS before I joined the team. Around months back a new application server added but it seems for that CCMS is not capturing histrorical data. In ST6N, I get all app servers name including the new one. When I cl

  • Text Editor (trying to write my own)

    I am trying to write a simple text editor with a 'Find' option. Is JEditorPane the right class to use? How would I search for a certain string and then scroll to make it appear at the top of the window? Thanks, Elena

  • "13'' inch pro or 13' air ?

    Help! I only have one day to decide to exchange my 13' pro for a 13' air  or just keep my pro.  I have done a lot of research, but still have not decided!! Here are my concerns....The new Pro is coming out in a few months which might be less in weigh

  • Regarding Providing Authorisation

                       I have created a new user under the organisational unit. Created a new service and assigned that particular user to approve or reject a service. But under my services authorisation tab,created service is not getting displayed to ap