Documents search only available for administrator

hello>
I have searched this on SDN but with no avail. I created file system repository, index, and itis working ok.
Administrator users can search on the documents. However, when a no administrator user searches, no matches are found. I assume this is an issue of permissions somewhere, but I cant find where.
I need to understand permissions since afterwards some of the searching will be done in anonymous mode.
Any ideas_
Thanks!
Alejandro

I finally solved this issue, the user mapping for normal users has to include the full DOMAIN/user windows name, and the windows password.
Portal administrators dont need this because the ACL for w2k lists are not checked.
I hope this will help someone with similar issues
Greetings!
Alejandro

Similar Messages

Is it possible that theseproperties are only available for files and not f

Hello All,
I have created few properties like ReqNo (takes Integer) and ReqDate (accepts Date).
I have set the above 2 properties as manadatory. Created a Group and added his goug in 'allgroups' such that I see a tab wherein I can fill in these properties.
My questions is:
<b>Is it possible that these properties are only available for files and not for folders</b>. The reason being that even if I create a new folder, I need to fill some values in the above two mentioned properties.
These properties need to be mandatory and cannot make them optional.
Please help me solve this mystery.
Awaiting Reply.
Thanks and Warm Regards,
Ritu

Hi Ritu,
If you only want the property to be available for files and not folders you only enter data into the "Document Validity Patterns" field in the Property config.
Regards
Paul

How to install a big program that is only available for PC on a Mac.

Hi everyone,
I really need help about that, I've just start a new job that requiered 20-20 Design, witch is only support by PC. But I don't want change my Mac for PC My iMac has Bootcamp already so I need to know, if I'm installing Windows Vista or 7 (witch is requiered by my program/software...I don't know how I'm suppose to call it in english), will I be able to make it work? And if it can help, my 20-20 design is working with an USB key not an installation CD. I've read a lot of topics but no one answer my question
Thanks for your help....you can save my life, my job and my Mac :P

How to install a big program that is only available for PC on a Mac.
Run the Boot Camp Setup Assistant. Install Windows. Install your "big program"

HT201209 So I have redeemed my $25 iTunes Gift Card on my iPad Gen4. Will this $25 be available for in App purchases or App purchases or is it only available for the use of purchasing music or other media through iTunes?

I have redeemed my $25 Gift Card and was wondering if that $25 can be redeemed for in app purchases or other app purchases or is it only available for music or media purchases through iTunes?

You can use an iTunes gift card for app, music, movies and other media.To redeem one see:
iTunes Store: How to redeem a code

AC:U only available for shipping

Anyone know why Assassin's Creed: Unity is only available for shipping on both the PS4 and X1 version? I know each store is gonna have like a zillion copies. Why can't I pre-order and select in-store pick up?

Hi DannyEndurance,
There are a few reasons why pre-order items on BestBuy.com may not be available for store pickup. In most situations though, this can generally be attributed to the item being an online-only product or all expected inventory having been already allocated to existing orders. While we can't provide any specifics here or details on upcoming product availability, I'd encourage you to keep an eye on BestBuy.com for updates the closer we get to the release date. Remember that you can also pre-order many titles we carry by visiting your local Best Buy store.
Thanks for your interest in pre-ordering Assassin's Creed: Unity with us!
Aaron|Social Media Specialist | Best Buy® Corporate
Private Message

Only Available for Store Pickup

I have six Xbox 360 Games in my cart that I would love to purchase!
Only problem is "Only Available for Store Pickup" and no stores in my area?
This really seems silly to me and is a missed sales opportunity.
No one our buying these games and no one probably will.
These titles have been available now for months...
Is there any possible way to simply have them shipped
to me or my local BB if they must be picked up at a store?
I would be more then happy to pick them up If I could.
There must be a way around this, can someone here work their magic.
Let's figure out how we can make this happen and make a sale!
THANKS - 3DK
3DKillers - Founder of ClaN G!B

Hi there 3DKillers,
How frustrating it would be to get a great selection of several games in your cart only to find they aren't available for store pickup in your area! If they're fairly popular games that we should be getting consistent stock of, it would seem strange that none of them are available in your area.
Sadly, if they are only available for store pickup, we would likely be unable to ship them to your home. With that said, if you should like to provide me the name for each game (SKUs would work perfectly) I would be happy to look further into this issue with you!
Sincerely,
Tasha|Social Media Specialist | Best Buy® Corporate
Private Message

Why are some TV seasons only available for purchase "by episode only"???

Hello,
I'm just wonderng why certain seasons of certain shows (most often the first season) are only available for purchase by episode and not the whole season...????

That content owner in Canada is currently Superchannel. So you can either pay them $19 per month, or else you can boycott them until they do release SOA to iTunes. I have opted for the latter.

Is BAM-reader only available for US IDs?

Is BAM-reader only available for US IDs?

I see it in the USA App store. If you can't from your store, I would assume it's not available in your country. AFAICT, all their physical stores are in the USA.

Why is siri and panorama only available for iphone4S and later?

How come Apple made the Siri and panorama only available for iPhones 4S and later? Doesn't it make more sense to include the iPhone 4 too because a lot of people got it too (more than the 4S I think).

If you want to see the differences between the iPhone 4 and the 4S and later, take a look at this http://www.apple.com/iphone/compare-iphones/
There are just some things that older model iPhones can't do that newer models can. Apple makes the decisions to improvce upon their devices so that customers can choose which device they want according to their needs. If you want a phone that does something your current one doesn't, look into the Apple Recycling Program to trade in your iPhone for a gift card that you can use to purchase a newer model phone
<Edited by Host>

HT4539 Why are all these apps only available for everything but my MacBook Pro?

Why are all apps only available for phones or pads??I only want to use them on my MacBook Pro???

Itunes does not sell any apps at all for computers.
Itunes ONLY sells apps for iphone/ipod/ipad.
If you want an app for your Mac, tehn shop in th Mac App Store

Drakengard 3: Why "Only Available for Shipping"?

I'm just wondering why there is no "In-store pick-up" option when you preoder Drakengard 3 online.

Hello OhhhhMyJosh,
Thank you for your interest in purchasing Drakengard 3 from Best Buy. Thank you too for being a My Best Buy member. At this time the game is only available for pre-order for shipping, but this may be changed in the future.
Please keep an eye on www.BestBuy.com for any updates to the listing.
Thanks,
Mike|Social Media Specialist | Best Buy® Corporate
Private Message

Document management plugin available for Reader?

We use PDF documents exclusively in our work setting. In order to manage our work and work-processes more efficiently, we require a document management solution. The best plugins would allow one to categorize, search, retrieve and enforce access controls for files. Is there such a plugin available for Reader?

Hello Murugesh,
Thanks for the responce ,
But When i tried to use the same FM to create Distribution list i didnt find ant parameter within the FM to pass the correct recepient name linked to the document(recepient list id) .
Can you please provide me the sample code or help me ,how to pass the recepient name coom type and num of copies for each recepient listid .
Urgent
Thanks a lot

Home sharing only available for a few minutes

Hello everyone,
So I have a strange problem and I'll do my best to explain everything I've tried and my current setup.
Origonal setup (Was working then just completely stopped)
     Windows Server 2008 (non R2) on an old computer (Currently offline)
          System was Domain Controller, DNS Server, DHCP server and File server as well as running iTunes
New setup (Thought it would fix the issue)
     Windows Server 2003 (fully updated and freshly installed for the sole purpose of iTunes home sharing)
          Different system then the 2008 and only runs iTunes and AirVideo Server (not joined to domain, never was)
          Linksys router handling DNS, DHCP again since I found out about the .local bonjour "bug" so I shutdown my Domain Controller to test
I have a Linksys smart Wi-FI router (my old router was dropping wireless connections around the same time so I figured it was the router) with dual band wireless (Cortana and Cortana-2.4). The 2003 ("MediaCentral") is connected via a known good ethernet cable directly to the router. My Macbook Pro (Late 2012) is connected wirelessly to Cortana. All devices (including my parents iPhone 4's) are authorized under my Apple ID and signed into home sharing.
I start iTunes on my macbook and my iPhone 5 sees the library no problem. I start iTunes on server and my macbook and phone both see it. The server, however, does not see my macbook's library. (which isn't really a big deal anyways). I can connect to the servers library and start watching a movie, heck I can watch the entire movie, faster forword, rewind pause all that stuff. As long as I don't disconnect it seems to work fine. The movie I currently have in the library is Transforms: Dark of the Moon bought on the iTunes store. My parents iPhone's never see the servers library. Our Apple TV see's it the same way my phone does and also sees my macbooks library.
Here's where things really go weird: If I didn't connect to the servers library within a few minutes of starting iTunes, it will disappear or fail to connect and then disappear (I guess the only reason it didn't disappear earlier was because of like a cache or something) and the only way to make it available again is by restarting iTunes on the server. Those first few minutes are like the golden time frame I guess you can call it. I don't know exactly how long until it stops working but I know it's not a long time. Probably less then five minutes.
So there's my situation, can anyone provide any guidence or suggestions to help me solve this?
I will be setting up a new domain controller under server 2012 but with a different domain name (matrix.dustinschreiber.com probably) as to avoid the .local bonjour problem.

Same issue exactly. Best thing to di is contact Apple so that they become aware of this regression. Below is what I have been posting:
Home sharing with the new Apple TV / iTunes update is just broke. Only works for a bit unless you restart iTunes or disable / re-enable Home Sharing. Use to work great until the last updates. This is not a network (router, firewall, ...) issue - just a (bad) regression in Apples software. Hopefully they fix this soon, hard to believe its been broke this long already. The Remote app update also fails to connect to Apple TVs (but does connect to iTunes) for many people as well. Poor QA all around. :(
I have yet to see any suggestion that actually works other than reverting to previous versions of fwr / iTunes - which is a pain / joke to do.
There are a *ton* of posts about this:
https://discussions.apple.com/message/18078180#18078180
https://discussions.apple.com/message/18078351#18078351
https://discussions.apple.com/message/18078326#18078326
https://discussions.apple.com/message/18078599#18078599
https://discussions.apple.com/message/18078600#18078600
https://discussions.apple.com/message/18087017#18087017
https://discussions.apple.com/message/18082439#18082439
https://discussions.apple.com/message/18086263#18086263
https://discussions.apple.com/message/18083552#18083552
https://discussions.apple.com/message/18103713#18103713
https://discussions.apple.com/message/18106478#18106478
etc...

Creative Zen Nano Plus Media Explorer only works for administra

Creative Zen Nano Plus Media Explorer only works for the administrator account; for other users the message "The Zen Nano Plus is not connected. Please connect your Zen Nano Plus to the computer." is displayed, but it *is* connected and works under other programs.
Version is .0.03.
Thanks for any assistance.
Edit: System is XPMessage Edited by zigkill on 0--2006 06:23 AM

RMskater wrote:I think you need to change the permissions to "Everyone".
How exactly do you do this? I checked this out tonight - when I logged onto my PC using my son's Limited User account (XP Home, BTW) I could connect his N200 and see it in Device Manager and Windows Explorer but both Creative pieces of software (CMS and N200 Media Explorer) did not see that it was there!
I tried setting the Run As... properties for the CTMS.exe file to run as one of the Admin user accounts but kept getting an error about being unable to find a specific file (which is in the Media Explorer folder!). When I went back to using the current user the error stopped. Perhaps I need to set the Run As.. options on that file as well?
As we don't use DRM'd music this isn't going to be a problem but it would be good to find out the cause of this once and for all.
I'm going to see if WMP0 has problems as well or if it's just the Creative ap
ps.
PB

Custom DNG camera profiles only available for DNG files?

I developed a custom camera profile for my Sigma DP-1, using a colorchecker chart and the DNG profile editor.
I exported the DNG profile in the default location.
When I open Lightroom or ACR, the new profile is not available for X3F files, only DNG files. Is this normal???

Well, I've imported the original X3F file as well as the converted DNG file in Lightroom.
When I develop the DNG file, my custom profile appears in the list. When I click on the X3F file, embedded* is the only option.
It may have to do with an incomplete support of the X3F format. I have just repeated the exercise for my D300, and in this case the custom profile is available for NEF files.
Too bad since I'm happy with some of the Adobe camera profiles for the D300, but less so with the default look for Sigma DP-1 files.
I guess I should file a bug report...
* or "matrix" or whatever is the term in the english version, I have the french version which says "incorporé"

Documents search only available for administrator

Similar Messages

Maybe you are looking for