Documents stack up in the printer cue and will not print

I have an HP photosmart B209a;
I worked fine in the past,
but now documents line up in the cue and will not print

Hi!
To ensure the most accurate information is provided, we will need to know the version of Windows or Mac in use.
If this is a time-sensitive matter, our US-based technical support team is standing by, ready to help 24/7 via Email at http://bit.ly/EmailCanon or by phone at 1-800-OK-CANON (1-800-652-2666) weekdays between 10 AM and 10 PM ET (7 AM to 7 PM PT).
Thanks and have a great day!

Similar Messages

The document shows in the printer viewer, but it is paused and will not print.

Hi, when ever I try to print anything, the doc is in the viewer but is always paused, and will not print. I've tried to restart, but it will not do it.
Any advice?

Hi, are you referring to a problem in trying to print via the ePrint service e.g.. sending an email to your printer's email address, or printing directly from your PC/laptop?
If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
I am an HP employee.

CreatePDF printer File shows ERROR in the status column and will not upload to my account

When printing to the CreatePDF printer. the file shows ERROR in the status column and will not upload to my account

Adobe retired this Feb 17, 2014.
This app sent content to and got content from the web based services of "CreatPDF" and "PDF Pack".
These are subscription services out in "the cloud". When the app was live you had to be online and signed into your account. The user forum for CreatePDF has a DOC that speaks to the app removal.
Be well...

I have a Officejet 8500 A910n. When printing a pdf the print job just stops and will not print.

Only certain files the print job just stops and will not print in Adobe Acrobat X. All other applications work fine.

Have you tried downloading and installing Adobe Acrobat XI? http://www.adobe.com/products/reader.html
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Samba cups and windows 8: printer spools but will not print.

Hello,
I have samba and cups setup. I have been trying to connect to my windows printer. Here is my setup
Arch linux linux-3.12.1-3
samba-4.1.2-1
cups-1.7.0-2
Windows 8.1
no firewalls
Samba config
[global]
security = user
#passdb backend = tdbsam
#username map = /etc/samba/smbusers
workgroup = Bobshouse
encrypt passwords = yes
wins support = yes
log level = 1
max log size = 1000
read only = no
#disable netbios = yes
printing = cups
printcap = cups
[homes]
browsable = no
map archive = yes
[Shared]
browsable = yes
read only = yes
path = /home/bob/Share
for cups some things I have tried are
lpd://hostname/printer
smb://username:password@hostname/printer_name
I can see the printer with smbclient
So the printer spools, but will not print. the paper does not move I just hear the printer. Also when I watch the print queues in windows and linux. Cups shows that it sent the document, but when I watch the windows queue it shows the document, but the size of the document stays at 32 kb out of 1.8 mb and says printing. I hope this makes sense. I am just trying to keep things very simple at this point. I just want to understand what the problem is and build on it.

Please provide the following relevant information so someone can help including:
Printer Model - done
Complete and Detailed Problem Description -
Operating System of computer (including service pack revision) - done
Connection Method - USB, Hardwired LAN, Wireless? -
Make and model of router and modem? -
Error messages - on printer screen and/or computer, any blinking light patterns?
If wireless, when the problem occurs, what is status of Blue Wireless light on printer, on, off or blinking? –
Power off printer and router. Power on router and wait 3 mins, power on printer. Does it connect to the router now? Do you have a valid IP address?

LR 4 - image does not appear in Preview and will not print`

The selected image appears on the main/center panel but not in the preview screen. Printing results in a white sheet of paper with no image at all. The image has been updated to LR 4 - but made no difference. I've served help and the forums (where i saw mention of similar problems, but no comments or guidance on the problem). What am I doing wrong?

The problem began with the installation of LR4. I print directly from LR4 to my HPZ3100. I routinely select "print preview" in the print dialogue box. Now the first print I see the preview and then it prints. If I select a second print job and use the "print preview" the print preview screen comes up blank and never loads. If I try to delete the print job, it just never responds (resolves) so I have to turn off the computer and the printer and restart to clear the print job. if I don't use the print preview, it prints just fine (except that I'm not able to check what's about to be printed). Thanks for any thoughts you have on this.
Date: Tue, 10 Jul 2012 16:01:47 -0600
From: [email protected]
To: [email protected]
Subject: LR 4 - image does not appear in Preview and will not print`
    Re: LR 4 - image does not appear in Preview and will not print`
    created by Brett N in Photoshop Lightroom - View the full discussion
Bill, if this is only happening some of the time, then we are probably looking at a resource issue. Any pattern in when things won't print? e.g. Certain file type won't but others will? Or is it more of a timing/order thing? e.g. First file prints fine, second does not? VStromee, do no files print for you? Or is it like Bill and sometimes the print and other times they do not? Did you install any new software recently or have any updates to the OS or any application that has printing capabilities?
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4549692#4549692
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4549692#4549692. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Lightroom by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

HP 7280 all-in-one says ink cartridges are empty and will not print from PC, but it copies fine.

Replaced 2 ink cartridges in hp 7280 but still says both cartridges are empty and will not print from PC, but it will copy fine. When I try to print I get a error box that says "Ink cartridges empty - replace black and yellow ink cartridges to continue." They are brand new - just bought them - expiration date Sep 2015. Have tried rebooting and disconnecting and reconnecting everything. Same error, but it still will do color copies fine - all cartridges are working. Help?!

Hi tfmartin,
I understand you have a Photosmart C7280 that you are unable to print to from your computer. I'm sorry to hear about this, but I will certainly do my best to assist you in resolving this issue.
Before I can offer any suggestions I do need to know which version of Windows or Mac that you're using and how the printer is connected (wireless or USB). Once I have that information I should be able to help you better. In the meantime, if you're using Windows, please download and run the HP Print and Scan Doctor to see if it can assist with the issue at hand
Hope to hear back from you soon! Have a great day
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Laser Jet 1536dnf MFP says memory low and will not print

Laser Jet 1536dnf MFP says memory low and will not print. Have tried hard disconnect and restart. Error persists.

Hey , Welcome to the HP Support Forum. I hope you enjoy your experience here. I see that you're encountering the memory is low error status on your LaserJet Pro 1536dnf MFP. I would like to help. For this particular error, I have found the NVRAM Initialization type of reset to be beneficial in restoring functionality. Note that completing this step will reset your printer's wireless configuration, ePrint address, and other customized printer settings. If you have created a custom @hpeprint.com address it will be permanently erased. For more information on custom ePrint addresses, click here. As HP does not typically make the steps for this type of reset available publicly, I will private message you the instructions you need. Please let me know the result of your troubleshooting by responding to this post. If I have helped you resolve the issue, feel free to give me a virtual high-five by clicking the 'Thumbs Up' icon below and clicking to accept this solution. Thank you for posting in the HP Support Forum. Have a great day!

8500 does not show troubleshooter as turned on. It is on and will not print.

Had this printer for many years. No problems. It now will not print. Windows 7 troubleshooter says to turn on the printer and try again. The printer was and is powered up and will not print. I have cycled both the printer and the computer trying to sync them.

Uninstall LR from Control Panel—there may be more than one entry: Adobe Photoshop Lightroom, Photoshop Lightroom, Lightroom are all possibilities, then after LR has been uninstalled, log out of the CC Desktop app using Gear / Preferences / Account / Signout, reboot, and then see if LR shows up in the CC Apps list, after you give it a minute or two to contact Adobe’s servers. LR 5.6 is the current version which is probably what the update message is about.

10.9 Reports HP Laser Jet is out of toner and will not print: printer does in fact have sufficient toner.

10.9 Reports HP Laser Jet is out of toner and will not print: printer does in fact have sufficient toner.

That message originates from the printer, not the Mac. Get in touch with HP, perhaps they have an explanation.

Printer is less than 2 months old and suddenly began sounding like a machine gun and will not print.

Printer is less than 2 months old and suddenly began sounding like a machine gun and will not print.

It sounds like it is broken. Contact HP about a replacement: www.hp.com/go/totalcare
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

My phone 5s did the new update and will not come back on. I already tried hard reboot still won't work. Been over a hour now. Please someone help I need my phone.

My phone 5s 16gb gold did the new update and will not come back on. I already tried hard reboot still won't work. Been over a hour now. Please someone help I need my phone. This phone is not even 6 months old been in case no scratches. This is driving me crazy.

Connect your phone to a computer and restore your software using iTunes.

Ok, I have changed the names of my iPads to each be different- but no matter what I do, the Apple ID comes up the old email address on the old iPad and will not let me update Apps, purchase , etc,

I have used your info to give my two iPads different names. My problem is that my old iPad still has the old email in the Apple ID pop up so it will not let me sign in. I checked my info in the manage my account page and there is my email as primary, which allows me to sign in for apps, etc on the newiPad air, but when I try to update or buy an App on the old iPad, the old email is in the pop up and will not let me sign in.
How do I change the email in the old iPad to match the new iPad????
The Old email is on my manage my account page as a verified ALTERNATE email.

We are fellow users here on these forums, you're not talking to iTunes Support nor Apple.
Have you created a new account or updated your existing account ? All content that you download from the store is tied to the account that downloaded it, so if you have created a new account then all of your existing downloads will remain tied to your old account.
If you've updated your existing account then try tapping on the id at the bottom of the Featured tab in the App Store app and log out of it and then log back in with the updated id so as to 'refresh' the account on it.

I purchased a song on iTunes and it is displayed in my list of SONGS. However, when I try to add to my iPhone 4, it displays with a small circle of dots to the left of the song title and will not play. How do I get this song onto my device?

I purchased a song on iTunes and it is displayed in my list of SONGS. However, when I try to add to my iPhone 4, it displays with a small circle of dots to the left of the song title and will not play. How do I get this song onto my device?

Hi TKCDM1!
You should try to get this purchase onto your iOS device by using the suggestions in the following article:
Downloading past purchases from the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/ht2519
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

I downloaded the latest version of itunes and now my ipod nano won't sync. The sync process appears to be locked up on the 2nd song and will not continue to sync. I unchecked the 2nd song so a different song would be 2nd, no benefit; reset my ipod nano;

I downloaded the latest version of itunes and now my ipod nano won't sync. The sync process appears to lock up on the 2nd song and will not continue to sync. I let it run all night the first time and it never went past the 2nd song. I unchecked the 2nd song so a different song would be 2nd, no benefit; reset my ipod nano; shut down laptop and restarted a different time; shorted the number of songs to sync; all without benefit.

When you connect your ipod up to the computer. It should show the device, usually with the name of the device, in my case 'jordan's ipod'. This should be on the row which shows 'songs', 'albums' e.t.c on the far right. There when you click on it it should go to a different screen showing a picture of your ipod along with two buttons - Update and Restore. Click update and it should take a 2 mins while your ipod is updated to the latest version of Ios.
After updating te ipod see if there is a change in results.
PS: make sure the device is active while syncing so keep tapping the screen.
Sorry for any incorrect info, i have an ipod touch, but i've had experience with an ipod

Documents stack up in the printer cue and will not print

Similar Messages

Maybe you are looking for