Documents to Character Values

Hi All,
   I want to attach Documents to Character Values of
   master data. Is there a way to load documents in a
   batch process, because attaching each document to a
   Character Value of master data is laborious.
   Please Suggest...
Thanks a lot

Hi:
There is a how-to guide on mass document upload. Please see http://service.sap.com/bi > services and implementation > how to guides > guides for 3.0 > How to Mass Upload Documents to BW
Although it was published for 3.0 it also applies to later releases.
Thanks for any points you choose to assign
Best Regards -
Ron Silberstein
SAP

Similar Messages

Passing 900 character value into a Single line

Hi Experts,
I have a scenario that i have to pass 900 character value to a single field. After that i need to download this internal table into an text file.
What happening after some characters the values are not getting passed into my varaibale.
So please help me how to accomodate all the 900 character values in a single field.
With Regards,
Sumodh.P

Hi,
   Chk this ...
DATA : BEGIN OF IT_ITAB900 OCCURS 0,
         VAL(900) TYPE C,
       END OF IT_ITAB900.
INITIALIZATION.
CONCATENATE 'abcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyz'
'abcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyz'
'abcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyz'
'abcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyz'
'abcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyz'
'abcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyz'
'abcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyz'
'abcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyz'
'abcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyz'
'abcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyz'
'abcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyz'
'abcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyz'
INTO
IT_ITAB900-VAL.
APPEND IT_ITAB900.
START-OF-SELECTION.
DATA : P_FILENAME TYPE STRING.
P_FILENAME = 'C:\Documents and Settings\testingis on.txt'.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE                    = BIN_FILESIZE
    FILENAME                        = P_FILENAME
TABLES
    DATA_TAB                        = IT_ITAB900 .
This writes all the characters ....
Regards,
Srini.

Error while assigning a character value to a numeric variable.

I fire a sql statement and check the number of rows returned by the sql.
I check this result with the application logs.
The application logs keeps the sqls fired by the application and the no of rows returned, in the example below the sql returned 8454 rows.
My script compares the two results.
***********Application Log***********
4/14/2008 11:15:01 AM: 0059 SQL SELECT "CLUSTER_CD",
4/14/2008 11:15:01 AM: 0060 "PRODUCT_DESC",
4/14/2008 11:15:01 AM: 0061 "TEAM_CD"
4/14/2008 11:15:01 AM: 0062 FROM "OPS$TMS"."MAP_CLUSTER_TEAM_PROD"
4/14/2008 11:15:01 AM: 3 fields found: CLUSTER_CD, PRODUCT_DESC, TEAM_CD, 8,454 lines fetched
***********Application Log***********
My script:
#!/bin/ksh
typeset -i resA
typeset -i resB
opstms_conn_string="abc/[email protected]"
set `sqlplus -s $opstms_conn_string << EOF
set pages 0
WHENEVER SQLERROR CONTINUE
SELECT count(*)
FROM MAP_CLUSTER_TEAM_PROD;
exit
EOF`
resA=$1 ##returns 8454
resB=`grep '3 fields found: CLUSTER_CD, PRODUCT_DESC, TEAM_CD,' BCVP_Main_Loader.qvw.log | awk '{print $10}'`
##resB returns 8,454
## here i get syntax error
if [ $resA -eq $resB ]; then
echo "QA passed for sql1"
else
echo "QA failed for sql1"
fi
The problem is as resB is integer variable it does not accept character value: 8,454 so returns a syntax error:
How do I change the value assigned to resB into a numeric variable?
error:
+ grep 3 fields found: CLUSTER_CD, PRODUCT_DESC, TEAM_CD, BCVP_Main_Loader.qvw.log
run.ksh[52]: 8,454: syntax error

Change:
resB=`grep '3 fields found: CLUSTER_CD, PRODUCT_DESC, TEAM_CD,' BCVP_Main_Loader.qvw.log | awk '{print $10}'`
to this:
resB=`grep '3 fields found: CLUSTER_CD, PRODUCT_DESC, TEAM_CD,' BCVP_Main_Loader.qvw.log | awk '{print $10}' | tr -d ,`
to drop the comma. Or you could do it in awk(1):
resB=`grep '3 fields found: CLUSTER_CD, PRODUCT_DESC, TEAM_CD,' BCVP_Main_Loader.qvw.log | awk '{ gsub( /,/, "", $10 ); print $10}'`
Or you could to it all in awk(1):
resB=`awk '
/3 fields found: CLUSTER_CD, PRODUCT_DESC, TEAM_CD/ {
gsub( /,/, "", $10 )
print $10
' BCVP_Main_Loader.qvw.log`
(This example was not tested, it's just for a model.)
Someone more of an SQL guru than I can probably tell you how to change your numeric locale to avoid presenting those commas in the first place and avoid the problem.
HTH

How 2 assgin a character value to the auxillary cell

Hi,
I'm assigning a character value to the auxiliary cell in the macro. But it gives me a dump. So do let me know can I assign a character value to the auxiliary cell ( I need to display this value for the alert text).
Thanks,
Siva.

Why are you trying to use a character in the planning book - why not a representative value in numbers
but if you HAVE to use characteristic then you can also try to use the notes functionality (right click on a cell and go to notes if you have not seen this )
These notes are usually anchored to a cell. These notes are stored in a table (check in se 16 with wildcard on notes ) and is associated to the value of a cell
So if you can reference a cell value and put in the conditons to the values on it you might be able to manipulate the values in the table for notes and this will cause the notes in the interactive planning boo to change accoring to the value of the cell

Problem with display of a character (value 65533)

Hi all, sorry for my english but i don't speak it very well.
I have a big problem with the visualization of a character.
I have a binary text that i have to analyze with java. With my utility all works fine, but when i get the character (binary 81) and i analayze this character i obtain an int 65533 or a byte -3 , and after a casting to char i see that java doesn't display correctly this char, infact i obtain a char like this a question mark in a square. Even if a try to write this into a text file, i can see correctly all the other char, but instead of this char i see a question mark.
Someone know why i obtain this?i have to set some specific character encoding or something like this?
I don't know if this is usefull, but these are Hebrew char.
Thanks,bye.

A character value of 65533 in not in the Unicode range for Hebrew and Java characters are Unicode encoded as UTF16. See http://www.unicode.org/charts/ .
65533 is not a byte value since bytes have a range -128 to +127 .
0x81 is not the same as 65533 decimal.
How are you converting the bytes of the file to characters?
Edited by: sabre150 on Oct 9, 2008 8:51 AM

Passing multiple character values from parameter form to PL/SQL

Hi,
I am passing multiple character values from parametr form into
the report query and a PL/SQL procedure. It works fine with the
query, when I use &variable. But, it doesn't compile in PL/SQL,
so I just used the :variable, but not getting any records in the
PL/SQL procedure. Any suggestions?
sincerely,
gj

gj / Fedro,
Only using the &referecne, you can pas a string / multiple character values and this would work for query only.
The bind parameter in PL/SQL wouls support only single value
Thanks
The Oracle Reports Team

XML Report Excel Output Numeric & Character value left aligned

Hi,
I want the XML Report Excel ouput both numberic and character values to be left aligned in the report ouput. Currently my report excel ouput prints the number value right aligned and character value left aligned.
I have tried to concat a space to the value to make that as a character value, but this gives a extra space in the report output, which shld not happen..
Please could anyone help me with a solution.
Thanks

Hi Uday,
You are making number as a string, by adding a character :) , so it will be displayed as string with space and not as number.

How to get Document Set property values in a SharePoint library in to a CSV file using Powershell

Hi,
How to get Document Set property values in a SharePoint library into a CSV file using Powershell?
Any help would be greatly appreciated.
Thank you.
AA.

Hi,
According to your description, my understanding is that you want to you want to get document set property value in a SharePoint library and then export into a CSV file using PowerShell.
I suggest you can get the document sets properties like the PowerShell Command below:
[system.reflection.assembly]::loadwithpartialname("microsoft.sharepoint")
$siteurl="http://sp2013sps/sites/test"
$listname="Documents"
$mysite=new-object microsoft.sharepoint.spsite($siteurl)
$myweb=$mysite.openweb()
$list=$myweb.lists[$listname]
foreach($item in $list.items)
if($item.contenttype.name -eq "Document Set")
if($item.folder.itemcount -eq 0)
write-host $item.title
Then you can use Export-Csv PowerShell Command to export to a CSV file.
More information:
Powershell for document sets
How to export data to CSV in PowerShell?
Using the Export-Csv Cmdlet
Thanks
Best Regards
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Function module to convert character value of month into numeric value?

Hi Experts,
I need to convert a character value of a month in three alphabets to its numeric value.
e.g. 'jun' should be converted into '06' and 'jan' into '01' using a function module.Can anybody please provide me a similar function module?
TIA
Abhishek

try this code:
DATA: text(20) TYPE c,
date TYPE sy-datum.
text = '06. Jul 06'.
TRANSLATE text TO UPPER CASE.
TRANSLATE text USING '. '.
CONDENSE text NO-GAPS.
CALL FUNCTION 'CONVERSION_EXIT_SDATE_INPUT'
EXPORTING
input = text
IMPORTING
output = date.
WRITE date USING EDIT MASK '__.__.____'.
Regards,
Dara.

How to convert character value to_date?

I want to change the time (hours) in sysdate to '10' and then save this new date into a date column for that i've written the following command
(TO_CHAR(SYSDATE,'DD-MON-RRRR')||' 10:'||TO_CHAR(SYSDATE,'MI:SS AM'))this command will remove the actual hours in sysdate and change it with the value '10'. but the result of this command is a character value. and i want a date value to insert into a date column. for that i've converted this command to_date as follows
TO_DATE(TO_CHAR(SYSDATE,'DD-MON-RRRR')||' 10:'||TO_CHAR(SYSDATE,'MI:SS AM'))but it gives the following error
ORA-01830: date format picture ends before converting entire input string
how to do this?

Gul wrote:
I want to change the time (hours) in sysdate to '10' and then save this new date into a date column for that i've written the following command
(TO_CHAR(SYSDATE,'DD-MON-RRRR')||' 10:'||TO_CHAR(SYSDATE,'MI:SS AM'))this command will remove the actual hours in sysdate and change it with the value '10'. but the result of this command is a character value. and i want a date value to insert into a date column. for that i've converted this command to_date as follows
TO_DATE(TO_CHAR(SYSDATE,'DD-MON-RRRR')||' 10:'||TO_CHAR(SYSDATE,'MI:SS AM'))but it gives the following error
ORA-01830: date format picture ends before converting entire input string
how to do this?TO_DATE(TO_CHAR(SYSDATE,'DD-MON-YYYY')||' 10:'||TO_CHAR(SYSDATE,'MI:SS AM'),'DD-MON-YYYY HH:MI:SS AM')

ERS generated document with zero value for SES

Hi,
I have maintained service entry sheet.
Accounting entry is generated.
When I run T code MRRL, it has generated document with zero value.
This is not a free goods PO.
Why this is happening?
Please guide on this issue.
Regards,
Piyush

Hi,
Creating an ERS zero document is an expected system behavior ,you
could create an ERS zero document by doing the following wrong
procedure:
1. Create PO with ERS falg ON.
2. Perform GR for PO.
3. Create the invoice by MIRO.(Not MRRL).
4. Run MRRL (LIV-ERS).
For every purchase order with flag 'ERS' a table entry is generated.
If a goods receipt is posted, this GR should be invoiced via ERS
(Tr. MRRL). Manually posted invoices should be avoided, because
the table entry will not be deleted. A new invoice receipt must be
created while running ERS (but with amount and quantity zero and without
FI documents) in order to give a message to the vendor because he
has sent you an invoice by mistake.
Could you please check also the note:1069215
Best regards
Erika

Document.form.element.value

Hi All,
I'm very new to javascript and had a quick question! Her is a sample of my code.
<script language="JavaScript" type="text/javascript">
                  function fnShowText(txt)
                    var x = document.getElementById(txt);
                    var e = document.getElementById(txt).name;
                    var sText = x.options.value;
                    var f = e.concat("b");
                    for (i=0; i<mainform.elements.length; i++)
                       if (mainform.elements<i>.name == f)
                     document.forms[0].elements<i>.value = sText;
                </script>
I know what the value of elements is, but I want this script to be dynamic. Instead of looping through all the elements to find the value 'i' like I am currently doing it. This is bad response time. Is there a way to skip the looping and make this call dynamically if I already have the name of the element?
Thanks in advance!
Eric
By the way there is a 'i' after elements but for some reason it isn't showing up on this board.

if you have a input tag in your html page you can go about it the following ways.
<input type=text name="t1" id="t1"></input>
<script>
document.getElementById("t1").value = "here";
document.getELementsByName("t1")[0].value = "there";
</script>
getElementsByName brings back an array.
getElementByID gets back one object.
You should test your taget browsers with both of these. I know that IE works fine with getID, but others do not.

[Microsoft][ODBC SQL Server Driver]Invalid character value for cast specifi

[Microsoft][ODBC SQL Server Driver]Invalid character value for cast specification
An you help me with this error?
This is the problemativ query:
Search QUERY : SELECT DISTINCT theK_files.fileid, theK_files.name, theK_files.t
itle, theK_files.description, theK_users1.name AS AuthorName, theK_users1.surn
ame AS AuthorSurname, [theK_file-extensions].name AS Extension, theK_files.publ
ished, theK_files.updated FROM theK_users INNER JOIN [theK_users-to-groups] ON
theK_users.userid = [theK_users-to-groups].userid INNER JOIN theK_usergroups
ON [theK_users-to-groups].groupid = theK_usergroups.groupid INNER JOIN [theK_g
roups-to-files] ON theK_usergroups.groupid = [theK_groups-to-files].groupid INN
ER JOIN theK_files ON [theK_groups-to-files].fileid = theK_files.fileid INNER
JOIN theK_users theK_users1 ON theK_files.authorid = theK_users1.userid INNER
JOIN [theK_file-extensions] ON theK_files.extensionid = [theK_file-extensions]
.extensionid WHERE theK_users.userid = '1' AND theK_files.extensionid = '1' AN
D ( theK_files.name LIKE '%a%' OR theK_users1.name LIKE '%a%' OR theK_files.de
scription LIKE '%a%' )

are these columns character/string/varchar:
theK_users.userid = '1'
theK_files.extensionid = '1'
if these are number columns, change them to
theK_users.userid = 1
theK_files.extensionid = 1
Jamie

Character value can display automatically

Dear Experts,
i have a question for character value.
In BW, we have master data for PH1-PH6.
And if you know the PH6, there is unique value for PH1-PH5.
For example, if PH6 = 111111, PH1 = 1, PH2 = 11, PH3 = 111,etc.
This value is unique.
Now we have a excel layout for user to key in.
User only key in PH6, we want that the value for Ph1-Ph5 can fill-in automatically.
Just like user key in ph6 = 111111, ph1 = 1, ph2 = 11, ect.
I think characteritic relationship can achieve this requirment.
But question is that we must use the exit type for this requriment, am I right.
Can we use attribute or reference data or hierarchy ,etc to achieve this target?
If we use exit, we must create a function to support this requirement.
Thanks and best regards
Alex yang

Hi Alex,
you can do that easily with standard relationship, you need to have in the master data of PH6 the others PH as attrubutes, this way you can use char relationship based on master data. A similar way is to have a DSO with PH6 as a key and all the others PH and you can use C R with DSO. again hier is the same, if you have the hier you can easily set C R based on hier.
if you don't want to create such relations then you need exit relat.
hope this helps
Mike

New document type for value contract

Dear Gurus
I want to create new document type for value contract , can you suggest me the configuration as well as areas to be taken care.
Advance thanks to all
Regards
Srinivas

Hi,
Please click the below link which is self explanatory in creating contract with screenshots.
http://web.mit.edu/sapr3/windocs/bpsps05m.htm
If you wish to go through some stuff notes on the processing of contracts, click the below:
http://help.sap.com/saphelp_srm30/helpdata/en/75/c65d3a0eb60365e10000000a11402f/content.htm
Regards,
Kk

Documents to Character Values

Similar Messages

Maybe you are looking for