Dodge and Burn tools in v9

I just moved up from Elements v4 to Elements v9. Where are the dodge and burn tools? Then again, maybe they don't want guys over 70 to be using such things. < Smile >

Hi terry
Right click on that blue thing!

Similar Messages

Dodge and Burn Tool basicly stopped working.

For some reason the Dodge and Burn Tool in Lightrooom 5.4 basicly stopped working. It will only make a slight adjustment no matter how much I change the exposure value. Does anyone know what could be causing this?

Do you have the flow and/or density of the Adjustment Brush set to a very low level?

Dodging and burning tool freeze up on CC 2104

I have recently subscribed to CC Photoshop 2104 and when using the burn tool the programme just hangs, or takes a very long time to complete the action. i have to close down lose my work and re-open. Dont know how to fix it, help?

I recognize that you want to use the Dodge and Burn tools for local tone adjustment, but it would be to your advantage to use another approach for dodge and burn. Consider this:
Dodge and burn, techniques that provide subtle local adjustments in the tone values of an image, are familiar to anyone who has worked in a film & paper darkroom. Photoshop’s similarly named tools have one notable shortcoming; each dodge or burn dab is incorporated into the image. This makes it impractical or impossible to undo one or more of the changes minutes later, when other dabs have been added elsewhere in the image. Instead, you must then pile correction on correction rather than modifying the original image values. It is an inefficient and often destructive procedure.
There is a better way – one that puts the dodge and burn adjustments on a separate layer where they may be seen at any time and each adjusted or even eliminated, returning the area to its original value – all without corrupting the original image. This is how to do it:
1. Load a file to be retouched and add a blank layer by clicking on the Create a New Layer symbol at the bottom of the Layers panel to the left of the Trash. The blank layer is Layer 1.
2. Choose Edit > Fill and from the double-arrow options of the Use field, choose 50% gray. Then click OK. The image area will become gray overall.
3. Change the Blending mode in the Layers panel from Normal to Overlay. The Background image will return although you will be working on Layer 1.
4. Do not use the Dodge and Burn tools. Choose the Brush tool and adjust its size by tapping either of the square brackets to the right of the P key on the keyboard. To adjust the Brush hardness – a soft edge is best for this -- hold down the Shift key as you continually strike the left the square bracket. Set the Opacity of the Brush in the Options bar at about 10%.
5. Painting in white will Dodge (lighten) the area, Black will Burn (darken) the area. Strike the D key to place Black as the Foreground color and White as the Background color. To transpose them stroke the X key. Dab or stroke with the Black to slowly add density. To lighten an area, dab or stroke with White. Although the image will reflect the changes, they are being recorded on Layer1 and may be viewed by turning off the eye in the Background layer. Best of all: to undo any tone adjustment and return the area to its original value, simply return that area to 50% by cloning from an adjacent unretouched area in Layer 1.

Dodge and burn tools in elements 12?

I just downloaded Elements 12. Why does it look so different? Are there fewer tools than previous versions? I don't see dodge and burn tools anywhere. Please help if you can!

I don't see dodge and burn tools anywhere.
http://forums.adobe.com/message/5755706

Dodge and burn tool

Well I have used the tool a couple of times and I just opened my aperture, and its suddenly gone...any reason why? Thats kind of weird

Never heard that one before. The dodge and burn plugin is actually part of the package in the applications folder so it's kind of hard to nuke it w/o blowing away aperture itself.
Hmmm, that is weird. I'll take a poke around and see if I can break it on purpose and get back.
RB

Dodge and Burn Stopped Working

My dodge and burn tools have stopped working. If some one could help me find out why this might be? My photoshop (CS6) is new and was only installed yesterday. I edited some photos yesterday and the dodge and burn was working but now it is not.

make sure you have a layer highlighted in the layers pallet that can be dodged/burned (they may not work on some type of layers, modes)
or try reset the tool:

CS5 dodge and burn overkill

I don't know if anyone else has this problem but, since upgrading from CS4 to CS5 I've noticed a big difference in the dodge and burn tools. In CS4 I'd always set them at 10% so that I'd get subtle changes - gradually building up to how I wanted the changes to look. Now, even setting as low as 5% the changes are drastic, especially the dodge tool. Yes, I have Protect Tones selected.
Any ideas?

Control-Alt-Shift after launch seems to have fixed it for me too.
Deleting the file "Adobe Photoshop X64 CS5 Prefs.psp" on it's own didn't.
1% still seems a bit darker than I remember, but since you guys haven't made any changes, it must be my imagination ;-)

Using Dodge and Burn Plug-in

I took a photo that I like of a sunset with trees in the foreground. I've been able to crop the worst of the powerlines out but I still have two remnant lines in the body of the photo.
I have tried to figure out the workflow on the dodge and burn tool to accomplish getting rid of these powerlines with no success. I have searched this forum and the manual for instructions for using this tool.
Does anyone have a workflow that would get rid of these powerlines? I do not have Photoshop nor do I intend to buy it.

Hi there,
If all you're wanting to do is remove powerlines, I'd suggest using the Spot and Patch tool instead of dodge and burn. This should clone out your powerlines and replace them with sky for a more natural effect.
I've not used it much, so you'll need to experiment a little with the settings, or look up tutorials or other forum threads here if you get stuck.
Andrew

Dodge and Burn on RAW images

Looking to start using RAW files more often to process my images.
Tried to use the dodge tool with a RAW file over the weekend and recieved a notification saying somthing along the lines of "Cannot use this function with a 16bit file, must convert to 8bit"
I also recieved a similar message when trying to use the magic brush tool.
I would like to be able to adjust exposure, color, contrast (clarity) etc. when working with a RAW file. Would like to be able to adjust these parameters using the select tool, and would also like to be able to "brush" theses adjusments on. Also, if there is a Gradual ND filter function available, i would like to know where to find it.
Is it possible to do these things (with a RAW image) using PSE? If so, how?
Or do I have to purchase Lightroom if i want to work with RAW images?
Thanks in advance for the help!

I don't believe you can dodge and burn on a RAW in PSE.
You can do it in the PSE Editor, after converting the file to 8 bits. For dodge and burn, there's probably no noticeable difference between doing it 8 bits vs 16bits. However, I would definitely advise you to do as much editing at 16bits before you switch to 8bits, because you can't switch back.
You could, if you want, use Lightroom to dodge and burn RAW photos.
The Magic Brush tool won't work on RAWs in PSE, you'll have to convert to 8bits; and this tool doesn't exist in Lightroom.

Dodging and burning photo in book?

I do my dodge and burn and extra little things on a photo already placed in a book. This creates a new copy of the master. I notice that it is still the old version in the actual book. I can't drag the copy up to replace the old unretouched photo ... it says something about being 'stacked'. I can't just 'unstack' because the new version disappears.
Not is an easy find in the manual. Any help would be most appreciated.
Ben

Since you seem not to get those lines when changing the duplicated layer's
mode to screen, your brush settings could be the cause.
Try something like this:
1. Duplicate the layer and change the layer's blending mode to screen.
2. Go to Layer>Layer Mask>Hide All
3. Use the brush tool with a soft round brush and paint with white on the areas you want to
lighten. (check that no dynamics in the brush panel are checked)
4. Use the layer's opacity setting to vary the effect after painting.
MTSTUNER

Dodge and burn plugin, how good is it?

Can some of you that are using the new dodge and burn plugin share some of your experiences. In the tutorial it looks pretty basic, direct and easy to perform. Also it seems pretty close to what I've been doing for the last 25 years in my b/w darkroom. I wonder if someone can say something about it's performance and the results, also on black and white images. How good is it? Could I leave PS out of my workflow as far as this tool is concerned? Thanks.

I've used this plugin many times and really like it especially for knocking down a distracting part or all of the background. I haven't used it so far on B&W images although I shoot quite a bit of B&W. I've found a couple of things - (1) be very careful about the strength setting because at 100% it's dead black and (2) I tend to use the Feathering once I've got my dodge or burn about where I want it. I'll open the brush size and with about a medium strength I'll "dust" the whole area I've worked. The feathering seems to blend everything so you don't have any harsh spots. The feathering does tend to add a small amount of "dodge" to what you've done so you may have to go back and redo the area(s). I would liken this to using a "pantyhose frame" rather than a paddle in the darkroom days. You remember that trick I'm sure. I don't have any reason to believe it won't work as well on B&W. I have found the eraser can save some work if you get a little heavy on the strength setting. Finally, I tend to take a long look at the work in full screen before I hit the save button - although you can go back into the Edit with Dodge and Burn and redo areas until you get what you want. Play with it and I think you'll agree it's a valuable tool.

Dodge and burn requirements

Hi,
I've downloaded Aperture 2 trial version to check out the dodge and burn plug in, however it is inactive.
Don't know how to fix this problem.
Is it possible that I need the Leopard?
Regards
Maciek

Obviously my mistake, sorry. I really did try to find something.
Searching the Aperture online help system returns only a glossary entry for "dodge" or "burn." I find no indications of a tool being available and I don't see what looks like a dodge/burn tool in any of my views.
Still looking, will fun to find one that I can use without going to Photoshop.
bogiesan

Dodge and burn workspace stopped working abruptly

hi--I've been processing 100 or so architectural photos and dodge and burn just stopped loading the workspace window. I'd done 7 or 8, then...nothing. I get a message saying it's preparing, then loading, then NOTHING. Ideas??

make sure you have a layer highlighted in the layers pallet that can be dodged/burned (they may not work on some type of layers, modes)
or try reset the tool:

Is there a way to enable the "protect tones" box while working in Lab mode for dodging and burning?

Is there a way to enable the "protect tones" box while working in Lab Color mode for dodging and burning?

Don't think so. Those algorithms are built around the RGB color model as far as I know and there is no way to achieve the same result in other color modes. It may not be programmaticalyl and matehmatically impossible, but it's probably too complicated for a quick solution due to constant color space conversion math getting involved.
Mylenium

Dodge and burn , can't save a big tiff.

Hi, I'm trying to save a tiff of 137 MB that I've worked on in dodge and burn but already three times I get the message it can't be saved and aperturte should be quitted and restarted (?) Someone can help with this one?
Thanks!

Thanks Clem,
Indeed I was low on spare space (10% left) so I changed that back to a save 25% of my HD. It doesn't help me out though; still getting this message after trying to save the tiff........

Dodge and Burn tools in v9

Similar Messages

Maybe you are looking for