Does 1067mhz ram is the same model with the 1066mhz ram

Just noticed that the RAM speed in my (MBP 15 inch 2.66 i7 - mid 2010 version) specs is 1067MHz and from what i know is all the ram that are available in the market are 1066 mhz, so is it the 1066mhz and 1067mhz is the same or is different model. Just curious if i get the 1066 ram to replace on my mcp will it cause any problem?

I'm not 100% sure about this one, but afaik this difference is simply an issue of different rounding behaviours. The real frequency will probably be somewhere 'round 1066,66 MHz, which is interpreted as 1067 by your system profiler.
So if you make sure the timings are the same, you'll be just fine. To be on the safe side, just open your MB and have a look on the label of the RAM that's already inside, and buy similar bars.

Similar Messages

My late 2009 macbook stopped booting up after swapping hdd's with a macbook of the same model with a newer OS what happened did I somehow update my older Mac hardware with newer OS software because it won't recognize the original hdd anymore

I swapped hdd's with two diff os's and now I'm getting the question mark in the folder icon after replacing the two to their original MacBooks but they work while swapped I realized afterwards that I wanted to use the newer OS in my external enclosure and keep the older hdd in the macbook it was in from the start ive reset pram tried to boot to the menus or what have you by following the step in these forums but my macbook isn't even recognizing the original hdd that came in the macbook

Try booting to the Startup Manager and select your system drive.
Startup Manager: How to select a startup volume
http://support.apple.com/kb/HT1310
Then see
http://support.apple.com/kb/TS2570
https://discussions.apple.com/docs/DOC-5282
Will it boot the disk when it is in an external enclosure but not when it is intsalled internaly? If so it may be the internal SATA cable that is bad (an inexpensive part).

Can I use the same recovery discs to restore Windows on multiple same model laptops?

Sir me & my brother have HP dv6 pavilion 3210us same model with preinstalled win7 Home Premium unfortunately my brothers laptop HDD change in to dynamic we can't boot to original system restore.But i have recovery media dvd seperate for my laptop can i use it for my brothers laptop to recover please help me to find out the solution

Since the laptops are the same model-yes, you can use your Recovery Discs on both.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

After I updated lion to 10.7.4, app store does not recognize my ID APPLE and it unable to connect me to app store in order to update/download apps? What have I to do? I have the same problem with mac mini e mac book air. Please help me!

After I updated lion to 10.7.4, app store does not recognize my ID APPLE and it unable to connect me to app store in order to update/download apps? What have I to do? I have the same problem with mac mini e mac book air. Please help me!

Your advice did not help me. I also installed 10.7.4 combo but the situation is the same.
my internet connection is ok, mail is ok, but app store after 3 resets does not recognize my ID and it says "connection is not possible". Why? I have the same problem in both my mac mini late 2009 and mac book air 2010? Is it a problem of 10.7.4 update? I have to solve this problem and how can i return to 10.7.3 if my last backup was not with 10.7.3???thank you for your kind collaboration...

My Macbook Air is stopping a few seconds into videos (e.g. Youtube and BBC iPlayer) and is doing the same thing with PDF downloads not

My Macbook Air is stopping a few seconds into videos (e.g. Youtube and BBC iPlayer) and is doing the same thing with PDF downloads which are only partially downloading then stopping. I changed some security settings yesterday but don't think I touched anything else. Can anyone help?

My Macbook Air is stopping a few seconds into videos (e.g. Youtube and BBC iPlayer) and is doing the same thing with PDF downloads which are only partially downloading then stopping. I changed some security settings yesterday but don't think I touched anything else. Can anyone help?

HT5295 I have read the other comments of others with the same problem of downloading podcasts and submitted my comment,but there is still no fix to the problem.Does anyone know why the trouble has not been taken care of?Who is the person dealing with this

the podcast app is not fixed still wont download,did not find any solutions with anyones comments,they all have the same problem with this app.So how can you say the problem is fixed,get someone who knows how to really do something so it is not a recurring topic of frustration!!!!!

You might get more replies to this (but not from Apple, who you will recall, do not monitor these discussions) if you had posted in the Podcasts for iOS discussions, but never mind. At least in this post you've mentioned that your problem is with the Podcast App, something you didn't mention in your previous post. Consequently, my comments were based on "problems downloading Podcasts", not "problems with the new Podcast App".
(I don't use the new Podcast App, since I cannot install iOS 5 on my Touch. So I stick with the older method of listening to Podcasts on my iPod.) That said however...
It cannot have escaped Apple's attention that the new Podcast App has not been well received. Although these discussions tend to focus on what's wrong rather than what's right, it does appear that the App hasn't been well thought out.
In particular, the Auto Play feature, which - once an episode has finished playing, the "next most recent unplayed episode" will begin. Now, maybe I'm wrong but to me that means that it plays the Podcasts in reverse date order, so episode 19 will play after episode 20 and episode 18 after ep.19! That is how the iPod Classic plays Podcasts by default and the Classic forum is littered with posts from people who think this is barmy. (I think it's barmy too!)
I use an iPod Touch as well. Although not perfect, playing Podcasts on the Touch is far easier than on a Classic.
You are unlikely to find any "solutions" to the issues with the Podcast App, because the "solution" is for Apple to redesign it.
If you are assuming that the update of 25th july is a claim that it's fixed... oh dear! I notice that the App views, shown in the Store, still include that "tortoise and hare" screen with what appears to be the transport mechanism for a reel-to-reel tape deck. That alone tells me there is no real improvement to the App. It really is the worst graphic Apple have ever produced! I'll be surprised if anyone under 35 recognises that graphic as a reel-to-reel tape deck.
Actually, I have a question for you.
If you have the Podcast App installed on your Touch, does that mean that the previous method of listening to Podcasts has been removed from your iPod, or can you still access them in the Music App? If you can, abandon the Podcast App and use the old method. If not, please warn me in order that I don't purchase a new iPod Touch until Apple fix this!
Sorry I can't be the bearer of more positive news.

HT1338 Does anyone know what the model # is of the current MacBook Pro 15in, 2.3 GHz , 4GB memory, 500 MG HD? Is it MD103LL/A? My MacBook Pro (3 yrs old) was stolen and my ins co found this model at Best Buy for $1799. Want to know if they're same, specs?

Does anyone know what the model # is of the current MacBook Pro 15in, 2.3 GHz , 4GB memory, 500 MG HD? Is it MD103LL/A? My MacBook Pro (3 yrs old) was stolen and my ins co found this model at Best Buy for $1799. Want to know if they're same, specs? Thank you!

Yes, it is in the United States and Canada. In other countries, the LL will be something else.
(69778)

My iPhone4 is showing no service so i power down but when i power back up it says to plug into itunes and restore, i had this same issue with another iPhone and apple replaced it but its doing the same thing on this phone any help would be apprecaited

my iPhone4 is showing no service so i power down but when i power back up it says to plug into itunes and restore, i had this same issue with another iPhone and apple replaced it but its doing the same thing on this phone any help would be apprecaited

AAAAAANNNNNNDDDDDDD go figure no one can help!!!!! i just dont know what to do, i guess no-one else does either lol!!!! thanks anyway!!!!!

I have an iphone 4 and it's not working, if i pay can apple replace it with the same model even though it's no longer for sale?

I have an iphone 4 and it's not working, if i pay can apple replace it with the same model even though it's no longer for sale?

If the iPhone has not been opened or serviced by other than Apple
or authoriized service provider (there are a few other requirements),
you should be eligible for out of warranty replacemement for $149 US.
Apple maintains sufficient stock for replacements even for iPhones that
are no longer available for purchase. You may be better off upgrading to
a newer version than paying $149 to stay with the iPhone 4.
What is no longer working? If you provide more details as to the problem
and what troubleshooting steps you have taken, some one may offer
a solution.

My iPad and iPhone have the same syncing calendar but my Windows 7 PC with iCloud does not sync/show the same calendar...please help!

My iPad and iPhone have the same syncing calendar but my Windows 7 PC with iCloud does not sync/show the same calendar...please help!

iCloud will not sycn a calendar from an external source. In order to use iCloud to sync it, you would have to move it to iCloud and stop using Google. I know how to do that on a Mac, but I'm not sure how to do it on a PC. If you're using Outlook, I suspect you export it as an .ics file to your desktop, then import it to the iCloud account in Outlook. I'm sure you could use Google to find the specific steps.
However, there's really no reason not to just use Google to sync your calendar across your devices. Instead, just continue to use Goole calendar on all your devices and they should stay in sync. Take a look at this video: http://www.youtube.com/watch?v=C0Jj0KFgbYI.

Does OVM3.03 have the same issues that OVM2 had with Broadcom nics?

OVM2 servers had occasional broadcast storms using Broadcom nics.
This is particularly true of the onboard Broadcoms on Dell PE710s.
Does OVM3 have the same issues with the onboad Broadcom nics on Dell blades (PowerEdgeM910 )?
Edited by: vitugv on Mar 24, 2012 3:05 AM

vitugv wrote:
Does OVM3 have the same issues with the onboad Broadcom nics on Dell blades (PowerEdgeM910 )?Not that I've heard of. OVM3 uses the UEK kernel (2.6.32) which has much newer drivers than OVM2. Also, OVM 3.1 will use the UEK2 (3.0.16) kernel, which is even newer still.
But, the best answer is for you to try it and see. :) I don't have any Dell blades to test with myself.

I have configured PDF Genrataor in LiveCycle 2.5. When I place a folder (which has doc file in it) in the IN folder..I expect the OUT to contain same folder (with pdf file in it), But it does not happen.

I have configured PDF Genrataor in LiveCycle 2.5. I have configured my watchedfolder endpoints.
When I place a folder (which has doc file in it) in the IN folder..I expect the OUT to contain same folder (with pdf file in it), But it does not happen. What I see in in the OUT folder I see a pdf file with the foldername and pdf extension....
Can anyone suggest.......

Why do we have to install 2 add ins for something that should be built in? Please add this to the next version or an update to this one even. We should see the full path of a bookmark when we search for it. Show Parent Folder alone isn't enough if you have sub folders, so I installed Go Parent Folder as well in case of sub folders.

Does apple care replace a broken iphone with the current model?

I swear the best boy guy said that. My phones not broken.its an iphone. 5 still under warranty with apple care but I'm just curious. Dw apple staff and community. I have no intentions of finding a way for my phone to stop working.

You'll get the same model if they still have it in stock; this isn't the same as actually selling it.
(88926)

I recently cracked my iphone 4s, and I am under warranty/ Icare, will they give me a new iphone5? or just replace my current iphone with the same model?

Iphone 4s -> iphone 5?

Hi Friend,
It is depends on how you crack your device. Is it by an accident?
Do you have iCare? If yes, check the warranty coverage. If the iCare warranty covers this kind of accident, probably they will fix the problem in your old iPhone, or give to you a new one of the same model (iPhone 4S).
Hope it helps

Elements 10 does not recognize multiple printers of same model?

In our business, we print on multiple printers, some of which are the same model.
For example, the Epson Stylus C88 is a common printer for us and we've been using PSE for years, since Version 3. For the purpose of our sample integrity (we print specialized inks to analyze their density), we wish to continue using Epson C88's for as long as we can still purchase them.
We've been making infrequent version upgrades to PSE, but are now finally caught up.
Unfortunately, when trying to print with PSE10 having more than one C88 installed, two problems occur:
1) The printer selection menu has all the printers listed, but as soon as we access the Advanced Settings, the printer choice defaults towards the most recently installed C88 (ie. we wanted to use Copy 5 and it would not allow us to choose anything but Copy 9, the latest one).
2) We're allowed to print exactly once. When I try to print a second time, a dialog box pops up saying:
"Before you can perform printer-related tasks such as page setup or printing a document, you need to install a printer."
The box pops when I hit the print command, meaning I can't do ANY printing, despite having a large number of printers installed, unless I close and reload the program.
I attempted a quick fix of this by uninstalling all my Epson C88's, and then reinstalling the particular C88 I wished to use. I was allowed to print, and continue printing, as long as that C88 was the only one that was installed. Unfortunately, when I moved to install another, the problem surfaced again. This time, I deleted my "original" C88 while keeping the second copy installed, and the problem persists. I could maintain one and only one Epson C88 installed at any time, but I'd rather not have to.
Doing a little research, I've noticed that this is not the only model of printer with this problem. I've attempted to load up an HP Officejet Pro 8000, and the exact same problem occurred, leading me to believe that it's an issue in PSE, not the printer.
The printer drivers are all current, and I have the latest version of PSE10 installed. This hasn't happened on any version previous to my knowledge (earliest known being PSE7).
Thanks in advance for any assistance you can give in this issue.
Scott Zdankiewicz
Research Associate
Cabot Corporation

Yeah, that does seem to allow it to print. This means I should rename all the printers, which, honestly, is not that big of a deal. Not so much as uninstalling and reinstalling.
Thanks!

Does 1067mhz ram is the same model with the 1066mhz ram

Similar Messages

Maybe you are looking for