Does 2 firewire audio and video interface can work together on FCP ?

hello,
My audio interface is a TC Electronic Konnekt 24D
my video interface is a Canopus ADVC 110
my hard drives are plugged in firewire too
and I use Final Cut Pro 5.0.4
So, the konnekt is recognized by FCP only when the Canopus is not plugged. And even then, the audio sometimes drop out and sometimes causes the app to crash, so that I have to trash the preferences
When I plug the Canopus, the Konnekt 24D is recognised by OS X but not FCP
I want to use the voice over tool with the konnekt 24D, so what should I do ?
Does 2 firewire audio and video interface can work together ?
If so, maybe I only have a driver problem from TC Electronic.
But if not, I have to change this interface. Let me know if only RME, MOTU, Presonus and Edirol work, as it is said on apple's webpage for hardware compatibility
thanks
eMac G4 1,25 Ghz Mac OS X (10.3.9)
eMac G4 1,25 Ghz 1 Go RAM DDR Mac OS X (10.3.9)

The 1082 does show up as a possible input when I open
the VO tool.
Ok. So an audio interface can be plugged to FCP without crashing the app. Because of the Konnekt driver problem, I wasn't shure of this.
I use my Aja box for export & external monitoring.
All my audio sources run back into the Tascam and I
use the analog mixer in the 1082 to monitor different
sources.
When I view external video, the audio follows it to
keep sync.
that's exactly what I want with other I/O interfaces. I'd like to monitor video with the canopus ADVC 110, and monitor audio with the Konnekt 24D (or another interface if this one is not compatible)
I also imput dailies with a deck or a camera (DV or HDV) but that's not the point here.
I want to imput audio with the Konnekt 24D because of its audio quality. Not audio sync to video dailies. But voice over, in sync with FCP video playback (for me, tha ADVC 110)

Similar Messages

Audio and video don't open together in viewer when double clicked

Hello everyone!
I'm having an annoying problem... it isn't something terribly important, but has decreased my work flow speed. Recently, I've had some trouble opening clips from the timeline in the viewer with the double click.
If I double click the video portion of the clip, even if both the video and two audio tracks are highlighted (and are still linked) only the video portion of the clip will appear (along with "filters" and "motion" tabs) in the viewer, and similarly when double clicking the audio tracks, though both video and audio are highlighted, only the audio tracks and "Filters" tab show up in the viewer. Additionally, once the item is double clicked at the left with the jigsaw pieces that can be used to set video and audio destinations, if I've clicked on an audio portion so only audio shows up in the viewer, only the jigsaw pieces for the two audio tracks (a1, a2) are visible, video track (v1) is no longer present, and vice versa.
I'd appreciate any advice that you all have! It's really driving me batty, in addition to not knowing what I did to make it that way, I can't figure out how to change it back!
Heather

Thanks for the advice.
The clips already appeared to be linked, and the selection "link" was checked, however when I unlinked and then relinked I found that the audio and video would open up at the same time in the viewer... problem apparently solved! However, the clips I had been working with I had to nudge audio and video a few frames apart (out of sync) to get the audio and video to line up. (gives the little red box with a +or- number in it on the clip).
When I unlinked and then relinked, the clip lost those red boxes and went back to being synced (as far as FCP is concerned) with the audio and video unaligned.
So, the problem appears to be coming from when I move the audio and video of a clip out of sync... why is this? Is this something I'm just going to have to deal with?
Thanks
H

IChat - audio and video chats not working to the UK

I'm trying to do an audio and/or video chat with my Mum who lives in the UK. We're both using the same version if iChat A/V (3.1.5)
However, we've been unable to succesfully connect. Whether she invites me to a chat or I her, we both get a message saying the other person failed to respond, even though we're both accepting the invitation.
I have no problem audio/video chatting to anyone else and it also work with my Mum through Skype or Yahoo Messenger.
Any ideas?

Hi FootsyStuey,
Welcome to the Apple Discussions
Can you tell us what you have done to set iChat up ?
System Preferences > Quicktime > Streaming seting to 1.5Mbps/T1/LAN ?
Mac Firewall ? see here http://www.ralphjohnsuk.dsl.pipex.com/page4.html
The ports in the modem ? See here http://www.ralphjohnsuk.dsl.pipex.com/page3.html
11:00 PM Tuesday; December 12, 2006

Screen Sharing, audio, and video chat not working with certain people

My ichat application will suddenly stop working after just a few seconds of starting wither screen sharing, video chat, or audio chat. I get the error message "No data has been received for the last 10 seconds." How do i go about fixing this?

Hi,
This message can be caused two ways.
1) a loss of Internet Connection through a Physical means.
(turning Off Airport card, Pulling out Ethernet Cable, modem or router failure, loss of service from ISP)
2) A router or modem Software intervention.
This most commonly happens in Video chats. The device has a feature called DOS (Denial of Service) which with modern Internet Speeds and Video Streams gets to the threshold where it cuts in. It requires that you turn the feature Off as there is not adjustment in the threshold at which it works.
A similar feature with a similar result is SPI (Stateful Packet Inspection).
Having said that, it very unusual to have it effect Audio only chat or Screen Sharing.
This means the issue could be at the Buddies end.
NOTES:
iChat creates Logs of Connection Failures of which there are about 5 types, caused by various issues in the connection Process.
The 10 Sec Error message covers those things where the connect End but iChat did not receive a "BYE" message (a controlled End to the Chat) or get a failure of another sort.
Basically you were connected properly (even if you did not hear or see the Buddy) and so other event cut the connection that was not iChat related.
Can you do Video chats with any of the 6 names in Table 1 ?
http://www.ralphjohns.co.uk/ContactTesters.html
Some of those will respond to Audio Only invites.
(I just tested 4 of them and three play music and one the Audio form the Jonathon Ive Video)
Do any of those work ?
That will exclude a Modem or Router Issue with DOS or SPI on the remote end.
9:29 PM Wednesday; June 9, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
Message was edited by: Ralph Johns (UK)
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Audio and Video Chat not working?

I know that several other people have asked this question but I still can't fix my problem with iChat. I've successfully had a video chat before but tonight, when I attempted to video chat with a friend I recieved the message, "[my name] didn't respond" multiple times. I'm not sure what's going on since I've been able to video and audio chat before. Any suggestions?

I'm having the exact same problem. Not a week ago, I was able to successfully connect to any computer on our home network (7 other machines), a friend in Massachusetts, and another, in Lousiana. After a router swap (same make and model, Linksys WRT54GX4) I recieve the '(I) did not respond' message. I have tried everything imaginable, DMZ on, DMZ off, route forwarding for every concievable combination, firewalls for my friends and I off, still no dice. They've tried downgrading to AIM 5.9 from Triton, but it still flatly refuses to work. It's a bit annoying, since my girlfriend lives 300 miles away, and my brother is in China..it'd be nice to talk to one of them every so often.
Ah, yes, just to throw a further wrench into the mix, I can connect to all three Apple test accounts with no problem, but any other test account gives me the connection problem

I downloaded Firefox 4 yesterday, and everything worked fine. When I booted up my computer today, I have problems. Flickr is all deformatted, streaming audio and video won't work from a variety of sources. All these things worked fine yesterday.

Flickr is deformatted. This forum is deformatted. Can't see the streaming toolbars at my public radio station. Can't stream news shows that I suually watch.
It all works fine with IE. I had to switch to Explorer to access this forum!

I had this problem too after i upgdatd to OS X Mavericks... only the songs on my iphone 5s that i purchased from itunes would play.
i read something about it being a syncing issue. when you plug your phone into your computer with the usb cable, the person said to switch from automatic syncing of itunes to the "manual" option. mine was already set to manual so i wasn't sure anything would work. BUT, when i plugged my phone into my computer, it started to sync all of my music on my phone again (top of itunes bar where song playing/time is listed said "now syncing 123/534 songs to x's iphone"). once that was completed, i checked the music app on my iphone and everything was back to normal!
so, i would suggest setting your music syncing settings to manual if you haven't tried that yet!
hope this helps!

JDev 9.0.3. : JBO Event and "OnClick" attribute" can work together ?

Hi,
I've a JSP page developed by JDeveloper 9.0.3, with a checkbox item:
<input name="pluto" type="checkbox" value="1" onClick="" />
I need to execute some transactions on db everytime "pluto" is checked or uncheked. I'd like to handle this by a JBO Event, is it possible?
I know that I could use javascript to handle the "OnClick" event, but how can execute insert statement on db using the same connection already defined in my JSP application?
Thanks in advance.
Nunzio

Repost

Online audio and video files are not working

i got a plugin for shockwave flash(adobe flash player) i thought it is the latest version so i downloaded it and installed it. Before installing the new flash player i was able hear song online and can watch videos but now both audio and videos are not working.

thanx for your advise but i got to hav one more problem and that is...i have downloaded the new version setup of firefox but after extracting it stops working and the installation process ends automatically...so please help.
the file that i downloaded had the "Firefox Setup Stub 23.0.1"

Can i take both Receveing of audio and video on the same window.

hi,
i m using AVTransmit2 and AVReceive2 for Transmission and Receiving all is doing well but problem is that AVReceive2 show Transmission of audio and video in both different windows and it use different players for audio and video. Can u tell me can i merge both audio and video at the receiving end. i m already mergeing audio and video at transmission end ???. any one tell me how can i solve this problem ???
thx in advance.

Hi,
I have the same situation - to use one window to show both rtp audio and video stream, but use the ControlPanelComponent of audio player to control both players.
I want to use the audio player as the master player so that the video player could be synchronized with it. So: audioPlayer.addController(videoPlayer).
In the only window frame for both players, I want to show the VisualComponent(VC) of video and the ControlPanelComponent(CC) of audio. So I add both components respectly to the window frame, after I got them from each player. Because the streams are coming from the network over RTP, and they do not become realized at the same time, I add the VC and CC of first realized player(no matter it is audio or video) to window frame at first, and then change them to the desired video VC and audio audio CC.
Though I check both player are realized and not started before I call the addController() method, the application stucked in this method. Of course I call it in a try block but no exception was thrown out.
when I use TimeBase to synchronize them, i.e., videoPlayer.setTimeBase(audioPlayer.getTimeBase()), everything goes fine. But, I can not control both players from one ControlPanelComponent in this way.
Anybody having any idea to solve this problem please reply.
By the way, in the example code such as AVReceiver, where audo and video streams are shown on two window seperately, user can use the ControlPanelComponent of audio to control both player, though it seems no relevant code to support that function. The ControlPanelComponent of video can not control the audio player anyway. Anyone having any explanation to this?

Logic 9 Audio and Video sync at beginning timecode, but not in the middle of playback.

Hey Guys,
I'm working on a Trailer for a feature length, and my video playback is pretty screwy.
I've double checked the video to be 23.976 framrat and set my project to that framrate, and I've done what I normally do with bitrate and sample rate. But currently my audio and video will not sync together when I start playback in the middle of my project.
Playback works fine in the start of the project, and everything looks and sounds great. But as I'm writing and edtiting further on in the project all the audio gets out of sync. If I start the project from the beginning, then all of the MIDI for the whole piece registers as synced, and the project sounds and looks great the whole way through. The problem comes from starting playback anywhere in the middle of the project.
I'm working with a .mov file (1:45 minutes); three .AAC audio files, and plenty of thrid-party plug-ins. 10.7.5 Mac OS X, 2.2 GHz i7 core, and 4GB m
of memory.
Any thoughts?
Thank you!

Thanks guys for the input.
I am using an Aurora 16 via firewire
I did change my buffer settings and that seemed to fix it but now I am at 128. I moved over to the aurora because I preferred the extra headroom. I guess I should have stuck with the apogee.
Tonight was the first time I had the opportunity to do a full tracking session with 9. I have been doing quiet a bit of mastering with no issues. Quiet a few issues. Everything from logic quitting to it just locking up. So far.....a pretty bad experience. I wonder if it could be Snow Leopard.......

How to fix problems between audio and video sync?

Hello, I have this old camera DSR 200P and I'm trying to import to my final cut pro x. The importation success well but at the end the syncro between audio and video doesn't work. How can I fix it?
It's possible my mac doesn't accept this kind of camera or should I change any options of final cut?
Thank you

I use to edit footage for a client that was recorded on a DSR-250 (successor of the DSR-200) and every time, every single time, the audio sampling rate would not match my Sequence settings of 48khz, 16bit. The sampling rate of the captured video was always off by a slight amount. It might be 47999.9 one time and 48000.1 the next time ... but it was never at 48000 as it should have been. I chalked it up to Sony using cheap synthesized crystals (frequency generator) to control the rate.
Anyway, the fix was to export the captured clip using QuickTime Pro with the export's audio settings to 48khz, 16 bit.
-DH

Audio and video drivers defect?

Hello there,
since yesterday i have a big problem with my iMac. It can't play any Audio and Video anymore. Video editing like Final Cut Pro 7, Premiere Pro and After Effects are crashing, when youre trying to start them. Same thing with iTunes and Diablo 3. Photoshop seems to work fine. Browsing in the internet is fine but also no video and audio here. And my system seems to be way slower than before.
What did happen? Well i was working in after effects and hearing some music via iTunes and had some preview running in the finder (cover flow i think is the name of feature), Then the sound stopped but i didnt bother to much about it. But then cover flow also stopped working. So i did a restart and after that the problems were there.
My Suggestion: After Effects is missing output-modules, in the audio menu in the system preferences there is no output modul avaiable either (no, even no digital) although the boot sound works perfectly. So i guess the drivers for audio and video aren't working anymore. But i have no idea how to fix this.
What i've tried: i've reseted the nvram two times, i install mac os X snow leopard again (without deleting the previour installation) and run all updates. I also reseted the System Control Manager (unplug the imac for fifteen seconds) and run the Apple Hardware Test. The latter said there is an error 4MDT/4/40000003:HDD -1299. No fking clue what this means. Google didn't help.
Can someone help me pls or do you know if the people at the genius bar can handle this kind of problem? I have an appointment at the genius bar on saturday, but i have no idea how trained these people are at fixing mac os issues.
ah and before i forget: i didnt configure the time machine :/ so there is no easy moving back to a time the imac was working.

Yeah i know its the hard disk drive. I just cant find anything what this code means besides theres something wrong with hdd
And yes i already backed it up, but anyway thanks for your advice.

Ichat audio and video problem

my ichat audio and video don't work with any of my friends, no problems with a text chat, i'm using tiger and they all have leopard, all macs are up to date, i've tried messing around with the ports, firewall is off, internet sharing is off, i know a lot of people are having this problem, are there any answers to this that actually work, i'd appreciate any help

Hi Ben
Welcome to the  Discussion Pages
Presumably you mean this Linksys is set to Not Block Pings on the WAN port (Or whatever phrase your device has) ?
I also presume that you have done the Quicktime Setting that Steve mentions above ?
I presume the Linksys is the modem as well and it is doing UPnP ?
At this stage I have two suggestions.
1)
Shut down the computer and remove the Ethernet cable (modem or computer end does not matter) (Make sure it will not connect Wirelessly when restarted before hand)
Restart the computer
Restart iChat.
Reconnect the Internet
Log iChat in.
2) Try a reinstall of the COMBO version of the 10.5.2 update
Both of these suggestions have been used in previous iChat's when other things have not worked and the set up appears OK on the surface.
Also try
3) Rebooting the router and a Modem if separate.
4) In System Preferences > Network > Connection method > Advanced Button > DNS tab add the DNS servers of your ISP
DO them one at a time so you know which one works.
8:26 PM Friday; February 29, 2008

How to synchronize multiple, unorganized audio- and video clips

I'm editing a video with audio recorded by an external recorder.
I've been given a lot of unorganized files and I wonder if there's a quick way to synchronize them all without knowing which audio- and video file that fit together.

I've been pretty amazed by how well the synchronize clips command works. You might take a chance and select all of your audio/video files at once, right click and choose Synchronize Clips.

I am trying to export a video from Premiere Pro. I have both audio and video checked and the sequence is active but only the audio exports. There is no video at all. Can anyone tell me how to get the video to export. It was working fine until today.

Premiere Pro CC has been working fine until today. I have completed my sequence and it is active. I have both audio and video checked when I am exporting using H.264 with Match Source Hi bitrate. I am choosing entire sequence. The audio exports but the video and title does not. Can anyone tell me how to troubleshoot this so I can complete this project? Please!

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

Does 2 firewire audio and video interface can work together on FCP ?

Similar Messages

Maybe you are looking for