Does 2950 have QoS?

I have many VLANs running on my 2950 switch, one VLAN is our regional network, is it possible it put QoS on this VLAN so I can prorities what traffic is more important?
Also can ports be blocked on a 2950?

Hi,
The 2950 does support QoS, but there are some important limitations - you cannot apply policies on a per-VLAN basis, for example. QoS policies have to be applied to physical interfaces and will apply to all traffic over that interface.
Pls also see the following link for port-based traffic control:
http://www.cisco.com/en/US/products/hw/switches/ps628/products_configuration_guide_chapter09186a00800d84c2.html
Regards,
Paresh.

Similar Messages

  • How can I connect my 3gen apple tv with HDMI to my bush LCD32TV022HD which does not have an HDMI port but does have 1)S-Video I/P, 2)Video I/P, 3) L

    How can I connect my 3gen apple tv with HDMI to my BUSH LCD32TV022HD
    This does not have an HDMI port but does have:-
    1) S-Video I/P,
    2) Video I/P,
    3) Audio Input (Left & Right)
    4) Audio In jack (for VGA and DVI source)
    5) DVI input
    6) VGA input

    Welcome to the Apple community.
    The Apple TV doesn't officially support a DVI connection, however you may be able to get it to work. You will first need to check that your TV supports either 720p or 1080p as well as HDCP. If you are able to get the video working over the DVI connection, you may also require a DAC in order to connect with Apple TV's optical audio output to the TVs audio imput.
    You may well wish to make sure that the DVI connection works before spending any money on a DAC..

  • Some of my apps refuse to open. For example, google crome gives me the message that it quit unexpectedly and gives me the option to submit a report to no resolve. Does anyone have suggestions?

    Some of my apps refuse to open. For example, google crome gives me the message that it quit unexpectedly and gives me the option to submit a report to no resolve. Does anyone have suggestions?

    Welcome to the Apple community.
    Does anyone have suggestions?
    Trash the spyware (Chrome) and use Safari.

  • I've just upgraded to IOS 7.0 on my iPhone 5 and the calendar is horrible!  I want to be able to see the who day at a glance not a few hours.  Does anyone have any suggestions?

    What's happened to the calendar in IOS 7.0?  I would like to be able to see the whole day at a glance not just a few hours.  Any suggestions?

    I know what it looks like and what it does.  I need to be able to see the whole day!  A few hours is not helpful for knowing whats ahead.  I don't want to scroll I just want to be able to look at a glance.  Does anyone have any helpful suggestions.

  • Getting this error while opening a folder : This file does not have a program associated with it for performing this action. Please install a program or, if one is already installed, create an association in the Default Programs control panel

    Hi,
    While trying to open a folder on my Windows 7 Home Premium, an error comes "This file does not have a program associated with it for performing this
    action.  Please install a program or, if one is already installed, create an association in the Default Programs control panel." I tried searching on the net but did not get great support for the issue when it happens with folder opening.

    Hi Nikunj Shah,
    First, I suggest you download
    Microsoft Safety Scanner or
    Malicious Software Removal Tool to run a full scan.
    The error messages here seems to be caused by the corrupted registries, which related with the folder association.
    You may take a try to merge the following registry settings to reset the folder association, before that, remember to backup your registry settings first:
    How to back up and restore the registry in Windows
    Copy and paste the following commands into Notepad, and save it to a .reg file:
    =================
    Windows Registry Editor Version 5.00
    [HKEY_CLASSES_ROOT\Folder]
    "ContentViewModeLayoutPatternForBrowse"="delta"
    "ContentViewModeForBrowse"="prop:~System.ItemNameDisplay;~System.LayoutPattern.PlaceHolder;~System.LayoutPattern.PlaceHolder;~System.LayoutPattern.PlaceHolder;System.DateModified"
    "ContentViewModeLayoutPatternForSearch"="alpha"
    "ContentViewModeForSearch"="prop:~System.ItemNameDisplay;System.DateModified;~System.ItemFolderPathDisplay"
    @="Folder"
    "EditFlags"=hex:d2,03,00,00
    "FullDetails"="prop:System.PropGroup.Description;System.ItemNameDisplay;System.ItemTypeText;System.Size"
    "NoRecentDocs"=""
    "ThumbnailCutoff"=dword:00000000
    "TileInfo"="prop:System.Title;System.ItemTypeText"
    [HKEY_CLASSES_ROOT\Folder\DefaultIcon]
    @=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,00,25,\
      00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,73,00,68,00,\
      65,00,6c,00,6c,00,33,00,32,00,2e,00,64,00,6c,00,6c,00,2c,00,33,00,00,00
    [HKEY_CLASSES_ROOT\Folder\shell\explore]
    "MultiSelectModel"="Document"
    "ProgrammaticAccessOnly"=""
    "LaunchExplorerFlags"=dword:00000018
    [HKEY_CLASSES_ROOT\Folder\shell\explore\command]
    "DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
    [HKEY_CLASSES_ROOT\Folder\shell\open]
    "MultiSelectModel"="Document"
    [HKEY_CLASSES_ROOT\Folder\shell\open\command]
    "DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
    @=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,00,25,\
      00,5c,00,45,00,78,00,70,00,6c,00,6f,00,72,00,65,00,72,00,2e,00,65,00,78,00,\
      65,00,00,00
    [HKEY_CLASSES_ROOT\Folder\shell\opennewprocess]
    "MUIVerb"="@shell32.dll,-8518"
    "MultiSelectModel"="Document"
    "Extended"=""
    "LaunchExplorerFlags"=dword:00000003
    "ExplorerHost"="{ceff45ee-c862-41de-aee2-a022c81eda92}"
    [HKEY_CLASSES_ROOT\Folder\shell\opennewprocess\command]
    "DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
    [HKEY_CLASSES_ROOT\Folder\shell\opennewwindow]
    "MUIVerb"="@shell32.dll,-8517"
    "MultiSelectModel"="Document"
    "OnlyInBrowserWindow"=""
    "LaunchExplorerFlags"=dword:00000001
    [HKEY_CLASSES_ROOT\Folder\shell\opennewwindow\command]
    "DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
    [HKEY_CLASSES_ROOT\Folder\ShellEx\ContextMenuHandlers\BriefcaseMenu]
    @="{85BBD920-42A0-1069-A2E4-08002B30309D}"
    [HKEY_CLASSES_ROOT\Folder\ShellEx\ContextMenuHandlers\Library Location]
    @="{3dad6c5d-2167-4cae-9914-f99e41c12cfa}"
    [HKEY_CLASSES_ROOT\Folder\ShellEx\ContextMenuHandlers\Offline Files]
    @="{474C98EE-CF3D-41f5-80E3-4AAB0AB04301}"
    [HKEY_CLASSES_ROOT\Folder\ShellEx\DragDropHandlers\{BD472F60-27FA-11cf-B8B4-444553540000}]
    @=""
    [HKEY_CLASSES_ROOT\Folder\ShellEx\PropertySheetHandlers\BriefcasePage]
    @="{85BBD920-42A0-1069-A2E4-08002B30309D}"
    [HKEY_CLASSES_ROOT\Folder\ShellEx\PropertySheetHandlers\Offline Files]
    @="{7EFA68C6-086B-43e1-A2D2-55A113531240}"
    [-HKEY_CLASSES_ROOT\Folder\ShellNew]
    [HKEY_CLASSES_ROOT\Folder\ShellNew]
    "Directory"=""
    "IconPath"=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,\
      74,00,25,00,5c,00,73,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,73,\
      00,68,00,65,00,6c,00,6c,00,33,00,32,00,2e,00,64,00,6c,00,6c,00,2c,00,33,00,\
      00,00
    "ItemName"="@shell32.dll,-30396"
    "MenuText"="@shell32.dll,-30317"
    "NonLFNFileSpec"="@shell32.dll,-30319"
    [HKEY_CLASSES_ROOT\Folder\ShellNew\Config]
    "AllDrives"=""
    "IsFolder"=""
    "NoExtension"=""
    ==================
    Once done, right-click the REG file and choose Merge. Alternately, you can open the Registry Editor and then using the
    Import option from the File menu, to merge the REG file contents.
    Let me know if you need any further help.
    Best regards
    Michael Shao
    TechNet Community Support

  • While saving a file, I have converted all my files to Pdf.  The only way to restore previous is to delete Adobe.  Does anyone have a soution?

    While saving a file, I have converted all my files to Pdf.  This made everything inaccessible, even Explorer.  I had to delete Adobe to get back to some of the previous files.  I tried to restore system to previous, but I kept getting a pop up message that said I did not have enough shadow space.  Does anyone have a solution?  Greatly appreciate your help.

    Application, file icons change to Acrobat/Reader icon

  • Error message while saving a sales order "Product 10069995 does not have sc

    hi Friends,
    i am creating an order , enter the material,quantity, batch , correct price everything etc etc. while saving the order it gives an error message "Product 10069995 does not have schedules assigned"

    Hi Suman
    Use transaction code OMJJ and check the "Allowed Transactions" for customizing movement types.
    Kalpesh

  • Every time I try to back up my Macbook Pro with an external hard drive using Time Machine, I receive the error of "the disk does not have enough space". I have a 500GB hard drive and only 120GB Macbook. It worked fine before the latest Maverick's

    Every time I try to back up my Macbook Pro with an external hard drive using Time Machine, I receive the error of "the disk does not have enough space". I have a 500GB external hard drive and only 120GB Macbook. It worked fine before the latest Maverick's update. Any help would be greatly appreciated.

    My guess would be it has created an entirely new backup of your drive when you upgraded to Mavericks.
    See Here: http://pondini.org/TM/1.html
    And here: http://pondini.org/TM/9.html
    Peruse the whole site. There is a lot of information there.

  • I just had to reformat the external hard drive that houses my iPhoto library, then restore it from a backup. Now Time Machine is telling me my backup hard drive suddenly does not have the space to complete a backup. I also noticed when I go in to Time Mac

    I just had to reformat the external hard drive that houses my iPhoto library, then restore it from a backup. Now Time Machine is telling me my backup hard drive suddenly does not have the space to complete a backup. I also noticed when I go in to Time Machine, there are only about 5 backups recorded on the ext. hard drive. There were many more before. Any idea what happened and if I have to buy a new back up hard drive?

    Hallo  Kieth ,
    I am not quite ready to restore the full iphoto library , as I have days of work re - imputting titles,descriptions and enhancement . I hope that your suggestion works , as I use my Macbook basically to work with digital photography. Through time , I will need to delete my library to recover more disc space and I would hate to have to spend more time re - imputting titles and descriptions all over again .
    Thanks for your interest and advice.
    regards  - Alan

  • I have quicktime pro and it does NOT have the screen record mode that Quicktime is suppose to have.  Can I uninstall it and go back to an older version that would have screen recording?  If so, how?  Step by step needed.  Thank you for your time.

    I have quicktime pro and it does NOT have the screen record mode that Quicktime is suppose to have.  Can I uninstall it and go back to an older version that would have screen recording?  If so, how?  Step by step needed.  Thank you for your time.

    Did you remove Quicktime X?
    On a normal install Quicktime 7 is installed in the Utilities folder and Quicktime Pro in the main Applications folder.
    You will need to reinstall OS X to get Quicktime X back if you have deleted it.
    I notice yor profile says 10.5.8. Quicktime X is only available on 10.6 and above.

  • Asking the Bridge Team:  Bridge "working color space" setting when one does not have the Suite?

    Common sense tells me there is really no such thing as a
    "working color space" in Bridge, because
    Bridge is not an image editor, just a browser
    Therefore, this may turn out to be a purely academic question; but that doesn't keep my curiosity from forcing me to ask it anyway. ;)
    Is there a way to set the Bridge
    "color settings" when one does not have the suite?
    The only Adobe program I keep up to date is Photoshop, so I've never had the suite. My version of Photoshop is 11 (CS4) and I run updated
    (not upgraded) versions of Adobe Acrobat 7.x, Illustrator 10.x and InDesign 2.x. Consequently, the Synchronize color settings command is not available to me.
    It seems to me that Bridge is behaving like a proper color-managed browser (e.g. Firefox with color management enabled), in that it displays tagged image files correctly and assumes sRGB for untagged image files. This normally works fine.
    But what if I wanted Bridge to assume my
    Photoshop color working space for untagged images
    so that it behaves the same as Photoshop? I'm just curious, as I deal with a minuscule, practically negligible amount of untagged files.
    My reason for bringing it up now is that I don't recall this being explicitly mentioned in forum replies when users inquire about color settings in Bridge. A recent post regarding Version Cue in the Photoshop Macintosh forum got me thinking about this. Just wanting to make sure that I'm right in my assumption that
    there is really no such thing as a
    "working color space" in Bridge, because Bridge is not an image editor, just a browser.
    Thanks in advance.

    Hi Ramón,
    Thanks for sharing the outcome of your tests. However, I may have found a bug/exception to Bridge's colour management policy!
    It appears that CMYK EPS photoshop files are not colour managed in Adobe Bridge, even if they contain an embedded ICC profile.
    I've tried every combination in the EPS 'Save As' dialogue box, so it doesn't seem to be an issue with file encoding. Also, Bridge doesn't rely on the low-res preview that is held within the EPS itself.
    My guess is that Bridge is previewing the CMYK EPS with a Bridge-generated RGB image, but it's being displayed as monitor RGB (assigned) rather than colour managed (converted to monitor RGB). For most users the difference will be barely perceptible, but the problem became very noticeable when using Bridge to preview Newsprint CMYK images on a wide-gamut monitor (images that should have appeared muted really leapt off the screen!).
    How do I report this to the Colour Police at Adobe?!?

  • After moving to iCloud I can only get my email through the cloud, no new emails are making it to my home computer. Does anyone have any advice on how to fix this issue?

    After moving to iCloud I can only get my email through the cloud, no new emails are making it to my home computer and .mac account. Does anyone have any advice on how to fix this issue?

    Welcome to the Apple Community.
    Which OS are you using.

  • I bought the new ipad (ipad 3) in July 2012.  what software did it come with and does it have siri?

    i bought the new ipad (ipad 3) in July 2012.  what software did it come with and does it have siri?

    The new iPad comes with iOS 5.1.1.
    To get all new functionality and Siri, you need to update to iOS 6.
    Be aware that if you were a Google Maps App user this has been replaced by version 1.0 of Apple's own new Maps App.
    From the many user reviews, Apple's Map App is still a work in progress.
    You can still access Google Maps from the Safari web browser.
    Also, the YouTube app has, also, made a disappearing act.
    You can use mobile YouTube from Safari to still view YouTube or a YouTube client app called Jasmine or download the Google YouTube App for iPhone. Google is working on a new YouTube App for iPad and isn't available, as yet.

  • My iphone 5 in ios 6.1.4 does not have facetime

    my iphone 5 in ios 6.1.4 does not have facetime, in call or settings. not have icon facetime in anywhere,, please heeelp,

    ramin6007 wrote:
    look, when i make a call, the facetime icon must be show it in there with mute and keypad and speakers and others.... , but there is no facetime icon on there, you think this is problme in ios 6.1.4?
    NO. It is a problem caused by the fact that the phone came from a country where FaceTime is illegal, as you have been told several times. There is no way to add FaceTime.

  • I replaced my iPhone with a Galaxy 5 and am not receiving all of my text messages. The sales person told me to remove my phone number from iTunes to stop this from happening. Is that true? What does iTunes have to do with text messages?

    I replaced my iPhone with a Samsung Galaxy5 and I am not receiving all of my text messages now. The rep at the store told me to go to iTunes and take my phone # off of the account and that would fix the problem. Is that true? What does iTunes have to do with text messages anyway?

    You need to remove your phone number from the iMessage system.
    Read here: http://support.apple.com/kb/ts5185
    ~Lyssa

Maybe you are looking for

  • Switching from sprint droid to iphone4:is there an APP FOR THAT??? lol

    i was wondering how easiest way i can transfer contacts from droid to iphone.. i had a droid thru sprint and upgraded to iphone4.. droid is not activated, iphone is.. which would be better: sync info on droid (its not activated, can i connect to wifi

  • Dictation not working. Please help.

    Just bought an iMac. Updated to mountain lion yesterday. Wanted to try Dictation, but doesn't seem to work. Have tried rebooting, changing language preferences, region preferences etc etc. but still not working. Three blue dots appeared and then disa

  • Can i trade my ipod touch 4g 8gb for the new 5g

    Hi i bought my ipod touch 4g 4 months ago and now i saw the ipod 5g and i really want to buy it but the bad thing is that my ipod is only 8gb while the ipod 5g is in 32 gb so what i was wondering is whether they would let me trade my old ipod for the

  • Filesize a problem when uploading a file to Oracle via JDBC?

    Hello, I am trying to upload a file via JDBC to an Oracle Database (into a BLOB field). The file is converted to a byte array for uploading. While processing the request the following error is thrown : [31.08.05 09:58:33:151 CEST] 40cc40cc SystemErr

  • Is there a way to update my ipod ? it wont update through itunes

    i have 4.2.1 and it wont update anymore, is that the highest update for an ipod touch 2nd generation ?