Does 2951 support VPN connectivity by default ?
Problem: I have an old 2851 with VPN module.
Currently, there are IPSEC crypto-connections in use that go through an EIGRP tunnel.
Showing crypto engine br I get: VPN Module (HW) status enabled.
Showing crypto maps, I see that there are leased some active ones.
Showing aaa: there are active sessions.
According to the documentation here:
http://www.cisco.com/c/en/us/products/collateral/routers/2900-series-integrated-services-routers-isr/data_sheet_c78_553896.html ,
The 2951 has embeded IPSec support.
The question is: Is a VPN additional module (3DS/AES encryption module) needed for the 2951 or will the connections work without it ?
Hello.
It will work, but requires SEC/K9 license (and general image, not NPE):
https://www.cisco.com/c/dam/en/us/products/collateral/routers/3900-series-integrated-services-routers-isr/qa_c67_606268.pdf
Also if you want to do IPSec for traffic rates higher than 85M unidirectional.
Similar Messages
-
"DBSL does not support extended connect protocol" while configuring SSFS
Hi, I'm trying to configure ssfs on ERP EHP7 on HANA Database system. Doing it with this guide - SSFS Implementation for Oracle Database
But when I'm trying to test connection with r3trans I got following error in the log:
4 ETW000 [ dev trc,00000] read_con_info_ssfs(): DBSL does not support extended connect protocol
4 ETW000 ==> ssfs won't be used 26 0.004936
I already updated DBSL_LIB to the latest version, but it doesn't help.
Here is full log:
4 ETW000 C:\usr\sap\CM1\DVEBMGS04\exe\R3trans.EXE version 6.24 (release 741 - 16.05.14 - 20:14:06).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 02.06.2014 - 13:49:16
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: C:\usr\sap\CM1\DVEBMGS04\exe\R3trans.EXE -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [ dev trc,00000] Mon Jun 02 13:49:16 2014 106 0.000106
4 ETW000 [ dev trc,00000] db_con_init called 36 0.000142
4 ETW000 [ dev trc,00000] set_use_ext_con_info(): ssfs will be used to get connect information
4 ETW000 61 0.000203
4 ETW000 [ dev trc,00000] determine_block_commit: no con_hdl found as blocked for con_name = R/3
4 ETW000 26 0.000229
4 ETW000 [ dev trc,00000] create_con (con_name=R/3) 17 0.000246
4 ETW000 [ dev trc,00000] Loading DB library 'dbhdbslib.dll' ... 46 0.000292
4 ETW000 [ dev trc,00000] DlLoadLib success: LoadLibrary("dbhdbslib.dll"), hdl 0, count 1, addr 000007FEED100000
4 ETW000 3840 0.004132
4 ETW000 [ dev trc,00000] using "C:\usr\sap\CM1\DVEBMGS04\exe\dbhdbslib.dll" 21 0.004153
4 ETW000 [ dev trc,00000] Library 'dbhdbslib.dll' loaded 21 0.004174
4 ETW000 [ dev trc,00000] function DbSlExpFuns loaded from library dbhdbslib.dll 42 0.004216
4 ETW000 [ dev trc,00000] Version of 'dbhdbslib.dll' is "741.10", patchlevel (0.22) 81 0.004297
4 ETW000 [ dev trc,00000] function dsql_db_init loaded from library dbhdbslib.dll 25 0.004322
4 ETW000 [ dev trc,00000] function dbdd_exp_funs loaded from library dbhdbslib.dll 41 0.004363
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 47 0.004410
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=-1,command=39,arg_p=0000000000000000) 24 0.004434
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 18 0.004452
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=-1,command=10,arg_p=000000000205F170) 22 0.004474
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 17 0.004491
4 ETW000 [ dev trc,00000] New connection 0 created 17 0.004508
4 ETW000 [ dev trc,00000] 0: name = R/3, con_id = -000000001, state = DISCONNECTED, tx = NO , bc = NO , oc = 000, hc = NO , perm = YES, reco = NO , info = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO , prog =
4 ETW000 38 0.004546
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=-1,command=10,arg_p=0000000141BAEDB0) 44 0.004590
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 19 0.004609
4 ETW000 [ dev trc,00000] db_con_connect (con_name=R/3) 19 0.004628
4 ETW000 [ dev trc,00000] determine_block_commit: no con_hdl found as blocked for con_name = R/3
4 ETW000 24 0.004652
4 ETW000 [ dev trc,00000] find_con_by_name found the following connection: 17 0.004669
4 ETW000 [ dev trc,00000] 0: name = R/3, con_id = 000000000, state = DISCONNECTED, tx = NO , bc = NO , oc = 000, hc = NO , perm = YES, reco = NO , info = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO , prog =
4 ETW000 164 0.004833
4 ETW000 [ dev trc,00000] read_con_info_ssfs(): reading connect info for connection R/3 34 0.004867
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=-1,command=74,arg_p=0000000000000000) 24 0.004891
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=15) 19 0.004910
4 ETW000 [ dev trc,00000] read_con_info_ssfs(): DBSL does not support extended connect protocol
4 ETW000 ==> ssfs won't be used 26 0.004936
4 ETW000 [ dev trc,00000] { DbSlHDBConnect(con_info_p=0000000000000000) 31 0.004967
4 ETW000 [ dev trc,00000] DBHDBSLIB : version 741.10, patch 0.022 (Make PL 0.26) 34 0.005001
4 ETW000 [ dev trc,00000] HDB shared library (dbhdbslib) patchlevels (last 10) 32 0.005033
4 ETW000 [ dev trc,00000] (0.022) Get database version via dbsl call (note 1976918) 24 0.005057
4 ETW000 [ dev trc,00000] (0.020) FDA: Core Dump in SELECT ... FOR ALL ENTRIES for tables with strings (note 1970276)
4 ETW000 32 0.005089
4 ETW000 [ dev trc,00000] (0.020) SQL DDL with data aging (note 1897636) 21 0.005110
4 ETW000 [ dev trc,00000] (0.017) Datatype NCLOB missing in tablesize calculation (note 1952609)
4 ETW000 30 0.005140
4 ETW000 [ dev trc,00000] (0.014) Tablesize calculation for HANA optimized (note 1952609) 25 0.005165
4 ETW000 [ dev trc,00000] (0.014) Native SQL UPSERT with DataAging (note 1897636) 21 0.005186
4 ETW000 [ dev trc,00000] (0.014) DBSL supports HANA revision number up to 3 digits (note 1952701)
4 ETW000 27 0.005213
4 ETW000 [ dev trc,00000] (0.010) Quotes missing by FAE with the hint dbsl_equi_join (note 1939234)
4 ETW000 28 0.005241
4 ETW000 [ dev trc,00000] (0.007) Obsere deactivate aging flag (note 1897636) 24 0.005265
4 ETW000 [ dev trc,00000] (0.007) Calculated record length for INSERT corrected (note 1897636)
4 ETW000 27 0.005292
4 ETW000 [ dev trc,00000] 15 0.005307
4 ETW000 [ dev trc,00000] -> init() 21 0.005328
4 ETW000 [ dev trc,00000] STATEMENT_CACHE_SIZE = 1000 181 0.005509
4 ETW000 [ dev trc,00000] -> init() 505 0.006014
4 ETW000 [ dev trc,00000] -> loadClientRuntime() 27 0.006041
4 ETW000 [ dev trc,00000] Loading SQLDBC client runtime ... 19 0.006060
4 ETW000 [ dev trc,00000] SQLDBC Module : C:\usr\sap\CM1\hdbclient\libSQLDBCHDB.dll 779 0.006839
4 ETW000 [ dev trc,00000] SQLDBC Runtime : libSQLDBCHDB 1.00.68 Build 0384084-1510 74 0.006913
4 ETW000 [ dev trc,00000] SQLDBC client runtime is 1.00.68.0384084 45 0.006958
4 ETW000 [ dev trc,00000] -> getNewConnection() 28 0.006986
4 ETW000 [ dev trc,00000] <- getNewConnection(con_hdl=0) 78 0.007064
4 ETW000 [ dev trc,00000] -> checkEnvironment(con_hdl=0) 34 0.007098
4 ETW000 [ dev trc,00000] -> connect(con_info_p=0000000000000000) 27 0.007125
4 ETW000 [ dev trc,00000] Try to connect via secure store (DEFAULT) on connection 0 ... 62 0.007187
4 ETW000 [ dev trc,00000] -> check_db_params(con_hdl=0) 61365 0.068552
4 ETW000 [ dev trc,00000] Attach to HDB : 1.00.68.384084 (NewDB100_REL) 7595 0.076147
4 ETW000 [ dev trc,00000] Database release is HDB 1.00.68.384084 49 0.076196
4 ETW000 [ dev trc,00000] INFO : Database 'HDB/00' instance is running on 'hanaserver' 6867 0.083063
4 ETW000 [ dev trc,00000] INFO : Connect to DB as 'SAPCM1', connection_id=201064 43659 0.126722
4 ETW000 [ dev trc,00000] DB max. input host variables : 32767 6954 0.133676
4 ETW000 [ dev trc,00000] DB max. statement length : 1048576 34 0.133710
4 ETW000 [ dev trc,00000] DB max. array size : 100000 75 0.133785
4 ETW000 [ dev trc,00000] use decimal precision as length 21 0.133806
4 ETW000 [ dev trc,00000] ABAPVARCHARMODE is used 19 0.133825
4 ETW000 [ dev trc,00000] INFO : DBSL buffer size = 1048576 20 0.133845
4 ETW000 [ dev trc,00000] Command info enabled 19 0.133864
4 ETW000 [ dev trc,00000] Now I'm connected to HDB 18 0.133882
4 ETW000 [ dev trc,00000] 00: hanaserver-HDB/00, since=20140602134916, ABAP= <unknown> (0) 30 0.133912
4 ETW000 [ dev trc,00000] } DbSlHDBConnect(rc=0) 18 0.133930
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=30,arg_p=0000000000000000) 24 0.133954
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 18 0.133972
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=21,arg_p=000000000205F460) 22 0.133994
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 18 0.134012
4 ETW000 [ dev trc,00000] Connection 0 opened (DBSL handle 0) 36 0.134048
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=7,arg_p=000000000205F4B0) 25 0.134073
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 17 0.134090
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=63,arg_p=000000000205F2B0) 23 0.134113
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 18 0.134131
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=21,arg_p=000000000205F300) 12214 0.146345
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 32 0.146377
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=11,arg_p=000000000205F420) 26 0.146403
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 18 0.146421
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=22,arg_p=000000000205F390) 23 0.146444
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 37 0.146481
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=13,arg_p=000000000205F260) 29 0.146510
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 18 0.146528
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=24,arg_p=000000000205F210) 37 0.146565
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 35 0.146600
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=51,arg_p=000000000205F200) 40 0.146640
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=15) 31 0.146671
4 ETW000 [ dev trc,00000] { DbSlHDBPrepare(con_hdl=0,ss_p=000000000205F4E0,op=3,da_p=000000000205F540)
4 ETW000 46 0.146717
4 ETW000 [ dev trc,00000] -> buildSQLStmt(stmt_p=000000000205F4B0,da_p=000000000205F540,for_explain=0,lock=0,op=3)
4 ETW000 89 0.146806
4 ETW000 [ dev trc,00000] <- buildSQLStmt(len=27,op=3,#marker=0,#lob=0) 33 0.146839
4 ETW000 [ dev trc,00000] -> stmt_prepare(sc_hdl=0000000003AEAC40,ss_p=000000000205F4E0) 75 0.146914
4 ETW000 [ dev trc,00000] sc_p=0000000003AEAC40,no=0,idc_p=0000000000000000,con=0,act=0,slen=27,smax=256,#vars=0,stmt=000000000AD913E0,table=SVERS
4 ETW000 46 0.146960
4 ETW000 [ dev trc,00000] SELECT VERSION FROM SVERS ; 23 0.146983
4 ETW000 [ dev trc,00000] CURSOR C_0000 PREPARE on connection 0 21 0.147004
4 ETW000 [ dev trc,00000] } DbSlHDBPrepare(rc=0) 6174 0.153178
4 ETW000 [ dev trc,00000] { DbSlHDBRead(con_hdl=0,ss_p=000000000205F4E0,da_p=000000000205F540)
4 ETW000 53 0.153231
4 ETW000 [ dev trc,00000] ABAP USER is not set 25 0.153256
4 ETW000 [ dev trc,00000] -> activate_stmt(sc_hdl=0000000003AEAC40,da_p=000000000205F540) 25 0.153281
4 ETW000 [ dev trc,00000] -> bind_variables(sc_hdl=0000000003AEAC40,in_out=0,bulk=0,da_p=000000000205F540)
4 ETW000 30 0.153311
4 ETW000 [ dev trc,00000] -> allocParameter(in_out=0,col_cnt=0) 21 0.153332
4 ETW000 [ dev trc,00000] -> calculate_record_length(sc_hdl=0000000003AEAC40,in_out=0,bulk=0,types=0000000000000000,#col=0,useBulkInsertWithLobs=0)
4 ETW000 54 0.153386
4 ETW000 [ dev trc,00000] #float=0,#lob=0,itab=0,#short=0,#int=0,#llong=0,#uc=0,rec_lng=0,db_lng=0
4 ETW000 33 0.153419
4 ETW000 [ dev trc,00000] <- calculate_record_length(row_size=0, lob_cnt=0, lob_pw_cnt=0, long_cnt=0, ins_bulk_lob=0, row_max=1)
4 ETW000 33 0.153452
4 ETW000 [ dev trc,00000] -> exec_modify(sc_hdl=0000000003AEAC40,ss_p=000000000205F4E0,bulk=0,in_out=1,da_p=000000000205F540)
4 ETW000 36 0.153488
4 ETW000 [ dev trc,00000] -> stmt_execute(sc_hdl=0000000003AEAC40,ss_p=000000000205F4E0,in_out=1,da_p=000000000205F540)
4 ETW000 95 0.153583
4 ETW000 [ dev trc,00000] OPEN CURSOR C_0000 on connection 0 28 0.153611
4 ETW000 [ dev trc,00000] CURSOR C_0000 SET InputSize=1 23 0.153634
4 ETW000 [ dev trc,00000] CURSOR C_0000 EXECUTE on connection 0 22 0.153656
4 ETW000 [ dev trc,00000] execute() of C_0000, #rec=0, rcSQL=0, rc=0 6404 0.160060
4 ETW000 [ dev trc,00000] CURSOR C_0000, rc=0,#rec=0,#dbcount=0 36 0.160096
4 ETW000 [ dev trc,00000] -> bind_variables(sc_hdl=0000000003AEAC40,in_out=1,bulk=0,da_p=000000000205F540)
4 ETW000 33 0.160129
4 ETW000 [ dev trc,00000] -> allocParameter(in_out=1,col_cnt=1) 21 0.160150
4 ETW000 [ dev trc,00000] -> calculate_record_length(sc_hdl=0000000003AEAC40,in_out=1,bulk=0,types=000000000205F518,#col=1,useBulkInsertWithLobs=0)
4 ETW000 37 0.160187
4 ETW000 [ dev trc,00000] #float=0,#lob=0,itab=0,#short=0,#int=0,#llong=0,#uc=72,rec_lng=144,db_lng=144
4 ETW000 31 0.160218
4 ETW000 [ dev trc,00000] <- calculate_record_length(row_size=144, lob_cnt=0, lob_pw_cnt=0, long_cnt=0, ins_bulk_lob=0, row_max=1)
4 ETW000 31 0.160249
4 ETW000 [ dev trc,00000] -> allocIndicator(in_out=1,row_cnt=1) 21 0.160270
4 ETW000 [ dev trc,00000] -> allocData(in_out=1,size=1048576) 21 0.160291
4 ETW000 [ dev trc,00000] -> bind_type_and_length(sc_hdl=0000000003AEAC40,in_out=1,bulk=0,arr_size=1,types=000000000205F518,da_p=000000000205F540)
4 ETW000 45 0.160336
4 ETW000 [ dev trc,00000] -> exec_fetch(sc_hdl=0000000003AEAC40,bulk=0,da_p=000000000205F540)
4 ETW000 41 0.160377
4 ETW000 [ dev trc,00000] xcnt=1,row_i=0,row_pcnt=0 20 0.160397
4 ETW000 [ dev trc,00000] -> stmt_fetch(sc_hdl=0000000003AEAC40) 20 0.160417
4 ETW000 [ dev trc,00000] CURSOR C_0000 FETCH (xcnt=1) on connection 0 23 0.160440
4 ETW000 [ dev trc,00000] next() of C_0000, rc=0 27 0.160467
4 ETW000 [ dev trc,00000] fetch() of C_0000, #rec=1, rc=0, rcSQL=0 28 0.160495
4 ETW000 [ dev trc,00000] -> deactivate_stmt(sc_hdl=0000000003AEAC40,da_p=000000000205F540,rc=0)
4 ETW000 91 0.160586
4 ETW000 [ dev trc,00000] -> StmtCacheFree(DBSL:C_0000) 24 0.160610
4 ETW000 [ dev trc,00000] CURSOR C_0000 CLOSE resultset on connection 0 20 0.160630
4 ETW000 [ dev trc,00000] } DbSlHDBRead(rc=0) 34 0.160664
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=43,arg_p=00000001400FAB06) 25 0.160689
4 ETW000 [ dev trc,00000] INFO : SAP RELEASE (DB) = 740 19 0.160708
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 16 0.160724
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=41,arg_p=00000001400FAB98) 49 0.160773
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 19 0.160792
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=14,arg_p=0000000002055888) 22 0.160814
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 18 0.160832
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=50,arg_p=0000000002055880) 22 0.160854
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 26 0.160880
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=52,arg_p=00000000020558F0) 23 0.160903
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 17 0.160920
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=20,arg_p=0000000141FC74F0) 99 0.161019
4 ETW000 [ dev trc,00000] INFO : STMT SIZE = 1048576 21 0.161040
4 ETW000 [ dev trc,00000] INFO : MARKER_CNT = 32767 18 0.161058
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 19 0.161077
4 ETW000 [ dev trc,00000] NTAB: SELECT COMPCNT, UNICODELG FROM DDNTT WHERE TABNAME = 'SVERS'...
4 ETW000 38 0.161115
4 ETW000 [ dev trc,00000] { DbSlHDBPrepare(con_hdl=0,ss_p=0000000002055160,op=3,da_p=00000000020551B0)
4 ETW000 31 0.161146
4 ETW000 [ dev trc,00000] -> buildSQLStmt(stmt_p=0000000002055180,da_p=00000000020551B0,for_explain=0,lock=0,op=3)
4 ETW000 32 0.161178
4 ETW000 [ dev trc,00000] <- buildSQLStmt(len=63,op=3,#marker=0,#lob=0) 23 0.161201
4 ETW000 [ dev trc,00000] -> stmt_prepare(sc_hdl=0000000003AEACD8,ss_p=0000000002055160) 38 0.161239
4 ETW000 [ dev trc,00000] sc_p=0000000003AEACD8,no=1,idc_p=0000000000000000,con=0,act=0,slen=63,smax=256,#vars=0,stmt=000000000AE09690,table=DDNTT
4 ETW000 38 0.161277
4 ETW000 [ dev trc,00000] SELECT COMPCNT, UNICODELG FROM "DDNTT" WHERE TABNAME = 'SVERS' ; 21 0.161298
4 ETW000 [ dev trc,00000] CURSOR C_0001 PREPARE on connection 0 19 0.161317
4 ETW000 [ dev trc,00000] } DbSlHDBPrepare(rc=0) 6453 0.167770
4 ETW000 [ dev trc,00000] db_con_test_and_open: 1 open cursors (delta=1) 30 0.167800
4 ETW000 [ dev trc,00000] db_con_check_dirty: 1 open cursors, tx = NO , bc = NO 18 0.167818
4 ETW000 [ dev trc,00000] db_con_check_dirty: db_con_dirty = YES 16 0.167834
4 ETW000 [ dev trc,00000] { DbSlHDBBegRead(con_hdl=0,ss_p=0000000002055160,da_p=00000000020551B0)
4 ETW000 35 0.167869
4 ETW000 [ dev trc,00000] ABAP USER is not set 23 0.167892
4 ETW000 [ dev trc,00000] -> activate_stmt(sc_hdl=0000000003AEACD8,da_p=00000000020551B0) 23 0.167915
4 ETW000 [ dev trc,00000] -> bind_variables(sc_hdl=0000000003AEACD8,in_out=0,bulk=0,da_p=00000000020551B0)
4 ETW000 32 0.167947
4 ETW000 [ dev trc,00000] -> allocParameter(in_out=0,col_cnt=0) 23 0.167970
4 ETW000 [ dev trc,00000] -> calculate_record_length(sc_hdl=0000000003AEACD8,in_out=0,bulk=0,types=0000000000000000,#col=0,useBulkInsertWithLobs=0)
4 ETW000 34 0.168004
4 ETW000 [ dev trc,00000] #float=0,#lob=0,itab=0,#short=0,#int=0,#llong=0,#uc=0,rec_lng=0,db_lng=0
4 ETW000 30 0.168034
4 ETW000 [ dev trc,00000] <- calculate_record_length(row_size=0, lob_cnt=0, lob_pw_cnt=0, long_cnt=0, ins_bulk_lob=0, row_max=1)
4 ETW000 31 0.168065
4 ETW000 [ dev trc,00000] -> exec_modify(sc_hdl=0000000003AEACD8,ss_p=0000000002055160,bulk=0,in_out=1,da_p=00000000020551B0)
4 ETW000 32 0.168097
4 ETW000 [ dev trc,00000] -> stmt_execute(sc_hdl=0000000003AEACD8,ss_p=0000000002055160,in_out=1,da_p=00000000020551B0)
4 ETW000 32 0.168129
4 ETW000 [ dev trc,00000] OPEN CURSOR C_0001 on connection 0 20 0.168149
4 ETW000 [ dev trc,00000] CURSOR C_0001 SET InputSize=1 19 0.168168
4 ETW000 [ dev trc,00000] CURSOR C_0001 EXECUTE on connection 0 20 0.168188
4 ETW000 [ dev trc,00000] execute() of C_0001, #rec=0, rcSQL=0, rc=0 5712 0.173900
4 ETW000 [ dev trc,00000] CURSOR C_0001, rc=0,#rec=0,#dbcount=0 34 0.173934
4 ETW000 [ dev trc,00000] -> bind_variables(sc_hdl=0000000003AEACD8,in_out=1,bulk=1,da_p=00000000020551B0)
4 ETW000 32 0.173966
4 ETW000 [ dev trc,00000] -> allocParameter(in_out=1,col_cnt=2) 21 0.173987
4 ETW000 [ dev trc,00000] -> calculate_record_length(sc_hdl=0000000003AEACD8,in_out=1,bulk=1,types=0000000002055240,#col=2,useBulkInsertWithLobs=0)
4 ETW000 34 0.174021
4 ETW000 [ dev trc,00000] #float=0,#lob=0,itab=0,#short=2,#int=0,#llong=0,#uc=0,rec_lng=16,db_lng=4
4 ETW000 30 0.174051
4 ETW000 [ dev trc,00000] <- calculate_record_length(row_size=16, lob_cnt=0, lob_pw_cnt=0, long_cnt=0, ins_bulk_lob=0, row_max=65536)
4 ETW000 32 0.174083
4 ETW000 [ dev trc,00000] -> allocIndicator(in_out=1,row_cnt=65536) 20 0.174103
4 ETW000 [ dev trc,00000] -> allocData(in_out=1,size=1048576) 30 0.174133
4 ETW000 [ dev trc,00000] -> bind_type_and_length(sc_hdl=0000000003AEACD8,in_out=1,bulk=1,arr_size=65536,types=0000000002055240,da_p=00000000020551B0)
4 ETW000 36 0.174169
4 ETW000 [ dev trc,00000] } DbSlHDBBegRead(rc=0) 24 0.174193
4 ETW000 [ dev trc,00000] { DbSlHDBExeRead(con_hdl=0,ss_p=0000000002055160,da_p=00000000020551B0)
4 ETW000 35 0.174228
4 ETW000 [ dev trc,00000] ABAP USER is not set 20 0.174248
4 ETW000 [ dev trc,00000] -> exec_fetch(sc_hdl=0000000003AEACD8,bulk=0,da_p=00000000020551B0)
4 ETW000 33 0.174281
4 ETW000 [ dev trc,00000] xcnt=1,row_i=0,row_pcnt=0 20 0.174301
4 ETW000 [ dev trc,00000] -> stmt_fetch(sc_hdl=0000000003AEACD8) 20 0.174321
4 ETW000 [ dev trc,00000] CURSOR C_0001 FETCH (xcnt=1) on connection 0 20 0.174341
4 ETW000&Hi,
Could you check for SAP Note 1952701 - DBSL supports new HANA version number
Regards,
Gaurav -
PC Suite does not support the connected phone........
Hi...
I have a big problem in the delivery of mobile and my type is N70 with Computer shows a message saying that some files missing from the mobile and this is the message that appears when connectivity.
PC Suite does not support the connected phone. PC Suite settings file is missing from the phone. Switch off your phone, switch it on, and try again.
Please assist in this matter, I can either send a site that I downloaded through by mobile phone.
thank you very much..
Moderator note: telephone number removed. It is not advised to publish personal contact information on a publically-accessible web forum.
Message Edited by michaels on 14-Feb-2008 08:40 PMHi Guys,
It always better to give more information when you are posting your issues....Please try to give your system info, versions of the pc suite you are facing the issue :-( so that it may help others to narrow down ur issues :-) -
SSL Client Binding Error (does not support directory connections encryp....
So I'm getting the dreaded "does not support directory connections encrypted with ssl" error when attempting to bind clients (10.5) to the server (10.5).
I followed the Apple KB article, but it did not help...double-checked permissions and the config files.
Binding works fine w/o SSL...but evidently SSL does not.
Any news on this?
Thanks.
jHmmm...still running into the same issue...do I need to give the cert reference text file certain permissions in order to work?
I have followed the advice on afp548, and have a self-rolled CA with a self-assigned cert for the server, which is also the dns name of the server. I copied the CA hash and pointed to that instead of the self-signed cert hash, but still...no dice.
-j -
Hi All,
This is my first post to ms exchange forum am getting Log onto incoming mail server (POP3): Your server does not support the connection encryption type you have specified. Try changing the encryption method. Contact your mail server administrator
or Internet service provider (ISP) for additional assistance. in my outlook clients, till last Sunday (12.04.15) my exchange was well & good, Monday morning suddenly the problem started like none of our outlook pop3 clients are able to communicate
with exchange (rest IMAP, SMTP & Exchange accounts are working fine). i have tried with all port no but no luck. please help me to get raid of this one.
Exchange 2013 CU6 with server 2012 Std 64Bit
Thanks,
MuraliDear All,
I have found the solution for above problem, the problem has occur due to PopProxy inactivity
please find relevant exchange management shell commends below.
1. Get-ServerComponentstate -Identity <yourmailserver.com>
Server Component State
yourmailserver.com ServerWideOffline Active
yourmailserver.com HubTransport Active
yourmailserver.com FrontendTransport Active
yourmailserver.com Monitoring Active
yourmailserver.com RecoveryActionsEnabled Active
yourmailserver.com AutoDiscoverProxy Active
yourmailserver.com ActiveSyncProxy Active
yourmailserver.com EcpProxy Active
yourmailserver.com EwsProxy Active
yourmailserver.com ImapProxy Active
yourmailserver.com OabProxy Active
yourmailserver.com OwaProxy Active
yourmailserver.com PopProxy Inactive
yourmailserver.com PushNotificationsProxy Active
yourmailserver.com RpsProxy Active
yourmailserver.com RwsProxy Active
yourmailserver.com RpcProxy Active
yourmailserver.com UMCallRouter Active
yourmailserver.com XropProxy Active
yourmailserver.com HttpProxyAvailabilityGroup Active
yourmailserver.com ForwardSyncDaemon Active
yourmailserver.com ProvisioningRps Active
yourmailserver.com MapiProxy Active
yourmailserver.com EdgeTransport Active
yourmailserver.com HighAvailability Active
yourmailserver.com SharedCache Active
2. Set-ServerComponentState -Identity <yourmailserver.com> -Component PopProxy -Requester HealthAPI
-State Active
3. Get-ServerComponentstate -Identity <yourmailserver.com>
Server Component State
yourmailserver.com ServerWideOffline Active
yourmailserver.com HubTransport Active
yourmailserver.com FrontendTransport Active
yourmailserver.com Monitoring Active
yourmailserver.com RecoveryActionsEnabled Active
yourmailserver.com AutoDiscoverProxy Active
yourmailserver.com ActiveSyncProxy Active
yourmailserver.com EcpProxy Active
yourmailserver.com EwsProxy Active
yourmailserver.com ImapProxy Active
yourmailserver.com OabProxy Active
yourmailserver.com OwaProxy Active
yourmailserver.com PopProxy Active
yourmailserver.com PushNotificationsProxy Active
yourmailserver.com RpsProxy Active
yourmailserver.com RwsProxy Active
yourmailserver.com RpcProxy Active
yourmailserver.com UMCallRouter Active
yourmailserver.com XropProxy Active
yourmailserver.com HttpProxyAvailabilityGroup Active
yourmailserver.com ForwardSyncDaemon Active
yourmailserver.com ProvisioningRps Active
yourmailserver.com MapiProxy Active
yourmailserver.com EdgeTransport Active
yourmailserver.com HighAvailability Active
yourmailserver.com SharedCache Activ
Replace yourmailserver.com with your server host name.
Thanks -
Am using Outlook calendar for Mac--needed for client connection. Invites will not go out. Error message: "server does not support secure connections." Resolution?
I have done a similar set of things and no results.
This is really odd, Mac Mail works other emasil clients work, just not Outlook.
The only event I can tie it back to is the outage a couple of weeks ago when AppleID's weren't working for a perdion of time. I ended up having to reset mine.
Is it feasible a local certificate got corrupted at the same or, oddly, that the SMTP servers don't have the updated password?
What's odd is that I no matter how much i Google, i can't find anyone else who has this problem, other than here? -
HELP - PC Suite does not support the connected pho...
After trying numerous times now I cannot get my question to you via your website. In utter frustration I am posting my problem here.
My problem is as follows
When I connect my phone via cable to my laptop I get the following error message. 'PC Suite does not support the connected phone. Install a correct version of PC Suite and try again'. I have already uninstalled the version that previously worked fine and downloaded the version recommended by your website which is 6.80.22. This is actually the version I already had which previously did work. I amd still getting the same error message despite uninstalling and reinstalling numerous times. And when I plug my phone into my partners computer it works fine. He has the same operating system and version of PC Suite. I am using Windows XP Home Service Pack. I have a Nokia 6131Thanks for the descriptive posting, unfortunately there are still many things that can be wrong.
You should try the things that are suggested here in many places: go to control panel - add/remove programs and select first Nokia PC Connectivity Solution and run a repair to it by selecting change - repair. Then same thing for Nokia PC Suite, run a repair to it.
Then boot PC.
Then check the PC Suite manage connections icon to make sure that the DKU-2, CA-53 USB connection is activated. -
File Adapter Sender - Does XI support Active connection mode?
Does the file adapter support Active connection mode?
What do you mean by this? R u talking about FTP connections?
VJ -
Why does my L2TP VPN connection never really contact the server?
To be clear, this configuration is not on my own Mac, but on one belonging to someone I serve with technical support.
I am configuring an L2TP over IPSec VPN connection on a MacBook Pro. This connection is to a ZyXEL USG 300 and works successfully from my iPad. (I do not have my own OS X device from which I can test the connection.)
To the best of my knowledge, I have entered all of the information that is needed for the connection. Yet when I try to connect, all I receive is an indication that the server did not respond. In the USG logs, there is no indication at all of there being even a connection attempt. In a Terminal session on the Mac (verbose logging is enabled), I read:
L2TP connecting to server 'xx.xx.xxx.xx' (xx.xx.xxx.xx)...
IPSec connection started
IPSec connection failed
It appears to me as if the connection never leaves the Mac and is prevented or stopped by some fault in the system. The firewall is turned off.
What suggestions do you have for identifying the problem?That's weird but you should be able to manually install the update like this:
#Download a fresh copy from [http://www.mozilla.org/en-US/firefox/all/ here] - direct link (https://download.mozilla.org/?product=firefox-28.0-SSL&os=osx&lang=en-US)
#Install the new version. For details, see [[How to download and install Firefox on Mac]]
Usually this fixes this issue with automatic updates. There will be new version available starting next Tuesday. The automatic update will happen sometime over the following week or so.
Let me know how it goes.<br>
Thanks,<br>
Michael -
Pc Suite does not support the connected phone.Pc s...
My PC version is XP Service Pack 1.I am using PC Suite 6.7.22.I am trying to connect using Infrared.I get the message as mentioned in the subject.Please help. Thanks in Advance
YOu can try to restore factory settings and see if the suite support file reappeares to phone. If not, visit service center and ask th ephone to be PRoperly UPDATED(so that the so called content package is also installed, that contains the Pc Suite support file
-
WRT1900AC does not support L2TP connection by L2TP server name
Basically - reiterating on my issue again and the question to Linksys personnel: I’m having WRT1900AC and have the issue connecting to my ISP. My ISP uses internet access authorization by ISP L2PT server name (not IP address). Linksys router configuration allows me to enter only IP address of the L2TP server, not L2TP domain server name. This is huge issue for me as I can figure out of course the IP address of the currently active L2TP ISP server but my ISP can not guarantee that in 10-15 min the server IP will be the same. I badly need the capability to use the L2TP server NAME (not IP address) in the config field of the router setup. Please let me know when this feature will be added to the new firmware for WRT1900AC and when this new firmware is going to ben released ? Thanks!
Hmm. What I know is that, Linksys WRT1900AC allows VPN tunnels using IPSec, L2TP or PPTP protocols to pass-through the router. But you can also set your router's Internet Connection Type to L2TP. Simply click on "Edit" (next to "Type of Internet Connection"). Then choose "L2TP" as your Connection Type from the drop-down menu. Make sure your settings (Server IPv4 address, Username, Password, Connection Mode, MTU) match.
-
Does OC4J support RMI/IIOP connections ?
Hi,
I have only one question :
Does OC4J support IIOP connections ?
I'd like to connect as EJB client to OLAPService on Oracle9i server (CORBA object), but I can't.
Thanks in advanceThanks for your timely post Debu.
I would like to state that I read and followed the guides (same files as those ponted by the links you just provided) and tried this:
1. Sample J2EE Application using ORMI in OC4J Standalone (this works ok)
2. Same but now using ORMIS (this also works fine)
3. Tried same J2EE App using IIOP; took these steps:
3.1 commented out the rmi.xml security lines,
3.2 enabled ports in internal-settings.xml,
3.3 changed the jndi.properties - now using corbaname URL,
3.4 enabled the IIOP stub generation in the JVM settings at oc4j startup, and finally
3.5 deployed the EAR using the generateIIOP flag.
The result: the exception I posted above
4. Tried with IIOP/SSL, did these steps:
4.1 configured the keystore settings in both internal-settings.xml and ejb_sec.properties
4.2 and added <ior-security-config> config elements to orion-ejb-jar.xml.
The exception here is a little bit different:
client started...
In IIOPInitialContextFactory ..
In IIOPInitialContextFactory getInitialContext..
1/08/2006 07:07:10 PM com.sun.corba.ee.impl.legacy.connection.SocketFactoryConnectionImpl <init>
ADVERTENCIA: ORBUTIL.connectFailure
org.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 201 completed: No
at com.sun.corba.ee.impl.logging.ORBUtilSystemException.connectFailure(ORBUtilSystemException.java:1739)
at com.sun.corba.ee.impl.logging.ORBUtilSystemException.connectFailure(ORBUtilSystemException.java:1757)
at com.sun.corba.ee.impl.legacy.connection.SocketFactoryConnectionImpl.<init>(SocketFactoryConnectionImpl.java:74)
at com.sun.corba.ee.impl.legacy.connection.SocketFactoryContactInfoImpl.createConnection(SocketFactoryContactInfoImpl.java:77)
at com.sun.corba.ee.impl.protocol.CorbaClientRequestDispatcherImpl.beginRequest(CorbaClientRequestDispatcherImpl.java:152)
at com.sun.corba.ee.impl.protocol.CorbaClientDelegateImpl.request(CorbaClientDelegateImpl.java:121)
at com.sun.corba.ee.impl.protocol.CorbaClientDelegateImpl.is_a(CorbaClientDelegateImpl.java:214)
at org.omg.CORBA.portable.ObjectImpl._is_a(ObjectImpl.java:112)
at org.omg.CosNaming.NamingContextHelper.narrow(NamingContextHelper.java:69)
at com.sun.jndi.cosnaming.CNCtx.setOrbAndRootContext(CNCtx.java:345)
at com.sun.jndi.cosnaming.CNCtx.initUsingCorbanameUrl(CNCtx.java:321)
at com.sun.jndi.cosnaming.CNCtx.initUsingUrl(CNCtx.java:247)
at com.sun.jndi.cosnaming.CNCtx.createUsingURL(CNCtx.java:85)
at com.sun.jndi.url.iiop.iiopURLContextFactory.getUsingURLIgnoreRest(iiopURLContextFactory.java:56)
at com.sun.jndi.url.iiop.iiopURLContextFactory.getUsingURL(iiopURLContextFactory.java:61)
at com.sun.jndi.url.iiop.iiopURLContextFactory.getObjectInstance(iiopURLContextFactory.java:34)
at oracle.j2ee.iiop.IIOPInitialContextFactory.getInitialContext(IIOPInitialContextFactory.java:76)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:662)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:243)
at javax.naming.InitialContext.init(InitialContext.java:219)
at javax.naming.InitialContext.<init>(InitialContext.java:175)
at hello.HelloClient.main(HelloClient.java:31)
Caused by: java.lang.RuntimeException: java.net.ConnectException: Connection refused: connect
at oracle.oc4j.corba.iiop.IIOPSSLSocketFactory.createSocket(IIOPSSLSocketFactory.java:398)
at com.sun.corba.ee.impl.legacy.connection.SocketFactoryConnectionImpl.<init>(SocketFactoryConnectionImpl.java:58)
... 19 more
Caused by: java.net.ConnectException: Connection refused: connect
at sun.nio.ch.Net.connect(Native Method)
at sun.nio.ch.SocketChannelImpl.connect(SocketChannelImpl.java:460)
at java.nio.channels.SocketChannel.open(SocketChannel.java:146)
at oracle.oc4j.corba.iiop.IIOPSSLSocketFactory.createSocket(IIOPSSLSocketFactory.java:389)
... 20 more
javax.naming.CommunicationException: Cannot connect to ORB [Root exception is org.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 20
at com.sun.jndi.cosnaming.CNCtx.setOrbAndRootContext(CNCtx.java:362)
at com.sun.jndi.cosnaming.CNCtx.initUsingCorbanameUrl(CNCtx.java:321)
at com.sun.jndi.cosnaming.CNCtx.initUsingUrl(CNCtx.java:247)
at com.sun.jndi.cosnaming.CNCtx.createUsingURL(CNCtx.java:85)
at com.sun.jndi.url.iiop.iiopURLContextFactory.getUsingURLIgnoreRest(iiopURLContextFactory.java:56)
at com.sun.jndi.url.iiop.iiopURLContextFactory.getUsingURL(iiopURLContextFactory.java:61)
at com.sun.jndi.url.iiop.iiopURLContextFactory.getObjectInstance(iiopURLContextFactory.java:34)
at oracle.j2ee.iiop.IIOPInitialContextFactory.getInitialContext(IIOPInitialContextFactory.java:76)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:662)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:243)
at javax.naming.InitialContext.init(InitialContext.java:219)
at javax.naming.InitialContext.<init>(InitialContext.java:175)
at hello.HelloClient.main(HelloClient.java:31)
Caused by: org.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 201 completed: No
at com.sun.corba.ee.impl.logging.ORBUtilSystemException.connectFailure(ORBUtilSystemException.java:1739)
at com.sun.corba.ee.impl.logging.ORBUtilSystemException.connectFailure(ORBUtilSystemException.java:1757)
at com.sun.corba.ee.impl.legacy.connection.SocketFactoryConnectionImpl.<init>(SocketFactoryConnectionImpl.java:74)
at com.sun.corba.ee.impl.legacy.connection.SocketFactoryContactInfoImpl.createConnection(SocketFactoryContactInfoImpl.java:77)
at com.sun.corba.ee.impl.protocol.CorbaClientRequestDispatcherImpl.beginRequest(CorbaClientRequestDispatcherImpl.java:152)
at com.sun.corba.ee.impl.protocol.CorbaClientDelegateImpl.request(CorbaClientDelegateImpl.java:121)
at com.sun.corba.ee.impl.protocol.CorbaClientDelegateImpl.is_a(CorbaClientDelegateImpl.java:214)
at org.omg.CORBA.portable.ObjectImpl._is_a(ObjectImpl.java:112)
at org.omg.CosNaming.NamingContextHelper.narrow(NamingContextHelper.java:69)
at com.sun.jndi.cosnaming.CNCtx.setOrbAndRootContext(CNCtx.java:345)
... 12 more
Caused by: java.lang.RuntimeException: java.net.ConnectException: Connection refused: connect
at oracle.oc4j.corba.iiop.IIOPSSLSocketFactory.createSocket(IIOPSSLSocketFactory.java:398)
at com.sun.corba.ee.impl.legacy.connection.SocketFactoryConnectionImpl.<init>(SocketFactoryConnectionImpl.java:58)
... 19 more
Caused by: java.net.ConnectException: Connection refused: connect
at sun.nio.ch.Net.connect(Native Method)
at sun.nio.ch.SocketChannelImpl.connect(SocketChannelImpl.java:460)
at java.nio.channels.SocketChannel.open(SocketChannel.java:146)
at oracle.oc4j.corba.iiop.IIOPSSLSocketFactory.createSocket(IIOPSSLSocketFactory.java:389)
... 20 more
NamingException: Cannot connect to ORB -
JMS doesn't work with VPN connection on weblogic8.1
Hi:
We have used JMS topic on weblogic 7.x and we use both LAN and VPN connection.
However, when we switch to weblogic 8.1, although it works fine when using
LAN connection,
it does not work when using VPN connection. We tried three different machines,
got the same
error.
The error is:
weblogic.jms.common.JMSException: Error creating connection on the server
at weblogic.jms.client.JMSConnectionFactory.createConnectionInternal(JMS
ConnectionFactory.java:160)
at weblogic.jms.client.JMSConnectionFactory.createTopicConnection(JMSCon
nectionFactory.java:95)
at com.dynamex.decs.common.jms.DecsSubscriber.initialize(DecsSubscriber.
java:59)
at com.dynamex.decs.client.orderentry.swing.OrderEntry.initRMI(OrderEntr
y.java:1714)
at com.dynamex.decs.client.orderentry.swing.OrderEntry.<init>(OrderEntry
.java:124)
at com.dynamex.decs.client.orderentry.swing.OrderEntry.main(OrderEntry.j
ava:3180)
Caused by: java.rmi.MarshalException: CORBA COMM_FAILURE 1398079697 No; nested
e
xception is:
org.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 209 completed:
No
at com.sun.corba.se.internal.iiop.ShutdownUtilDelegate.mapSystemExceptio
n(Unknown Source)
at javax.rmi.CORBA.Util.mapSystemException(Unknown Source)
at weblogic.jms.frontend._FEConnectionFactoryRemote_Stub.connectionCreat
eRequest(_FEConnectionFactoryRemote_Stub.java:106)
at weblogic.jms.client.JMSConnectionFactory.createConnectionInternal(JMS
ConnectionFactory.java:139)
... 5 more
Caused by: org.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 209 completed:
No
at com.sun.corba.se.internal.iiop.IIOPConnection.purge_calls(Unknown Sou
rce)
at com.sun.corba.se.internal.iiop.MessageMediator.handleInput(Unknown
So
urce)
at com.sun.corba.se.internal.iiop.messages.MessageBase.callback(Unknown
Source)
at com.sun.corba.se.internal.iiop.MessageMediator.processRequest(Unknown
Source)
at com.sun.corba.se.internal.iiop.IIOPConnection.processInput(Unknown
So
urce)
at com.sun.corba.se.internal.iiop.ReaderThread.run(Unknown Source)
Does anybody have the experience? Can anybody give a hint?
Thanks,
Tony
Hi Tony,
Given that the thick jar works, I would classify the problem
as a bug - not a missing feature. The thin jar is contracted
to be just as capable as the thick jar. My guess is that
the bug is likely in IIOP but perhaps could be in JMS.
Contact customer support (this forum is not maintained by
customer support). Meanwhile, you can post your info
to the IIOP newsgroup to see if they can help.
You asked how long it would take to fix? That depends
on bug priority (set by the customer) and bug complexity,
but its usually measured in days or weeks (not months).
You can speed up the process by giving support your
logs and stack traces, as well as a simple reproducer,
and telling them you are willing to try out a prototype
patch. But before going through extra trouble, just give
them the logs/stack traces, in case it is a known issue
for which there is already a fix or there is a fix in progress.
Tom
tony yang wrote:
> Tom:
>
> Thanks,
> We actually use t3. However, in terms of weblogic 8.1 doc, t3 transparently
> uses iopp. So t3 or iopp both fails over VPN connection.
>
> After replacing with full weblogic jar as you suggested, it works.
>
> However, we really want the thin client because we have huge amount of client
> deployments.
>
> The other developers here also noticed other problems beside JMS problem
> when using VPN connection and thin client jars.
>
> We guess full weblogic.jar uses real t3 instead of iiop.
>
> Seems that iiop does not work well over VPN connection.
>
> Could you give some estimate of when we can have the new thin client jars
> to support VPN connection (even not official release)?
>
> Tony
>
> Tom Barnes <[email protected]> wrote:
>
>>Hi Tony,
>>
>>At first glance I don't know what is going on, and can only
>>make some random suggestions. Perhaps try
>>the t3 protocol (rather than iiop protocol) if you are using iiop
>>URLs to connect to JMS. If you are using the new 8.1 thin
>>client jars, try switching back and using full jar instead.
>>Perhaps try posting to the IIOP newsgroup.
>>
>>Tom, BEA
>>
>>tony yang wrote:
>>
>>
>>>I also have the log from weblogic server:
>>>
>>>weblogic.jms.dispatcher.DispatcherException: Could not register a HeartbeatMoni
>>>orListener for [weblogic.iiop.IIOPRemoteRef@745152c4] for weblogic.jms.C:dal603
>>>t05:rcy:-l91
>>> at weblogic.jms.dispatcher.DispatcherWrapperState.addPeerGoneListener(D
>>>spatcherWrapperState.java:563)
>>> at weblogic.jms.dispatcher.DispatcherManager.dispatcherAdd(DispatcherMa
>>>ager.java:106)
>>> at weblogic.jms.dispatcher.DispatcherManager.addDispatcherReference(Dis
>>>atcherManager.java:196)
>>> at weblogic.jms.frontend.FEConnectionFactory.connectionCreateInternal(F
>>>ConnectionFactory.java:413)
>>> at weblogic.jms.frontend.FEConnectionFactory.connectionCreateRequest(FE
>>>onnectionFactory.java:385)
>>> at weblogic.jms.frontend.FEConnectionFactory_WLSkel.invoke(Unknown
>>
>>Sour
>>
>>>e)
>>> at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:466)
>>> at weblogic.rmi.cluster.ReplicaAwareServerRef.invoke(ReplicaAwareServer
>>>ef.java:108)
>>> at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:409)
>>> at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Authenticat
>>>dSubject.java:353)
>>> at weblogic.security.service.SecurityManager.runAs(SecurityManager.java
>>>144)
>>>@
>>>
>>>
>>>"tony yang" <[email protected]> wrote:
>>>
>>>
>>>>Hi:
>>>>
>>>> We have used JMS topic on weblogic 7.x and we use both LAN and
>>>>VPN connection.
>>>> However, when we switch to weblogic 8.1, although it works fine
>>>>when using
>>>>LAN connection,
>>>>it does not work when using VPN connection. We tried three different
>>>>machines,
>>>>got the same
>>>>error.
>>>> The error is:
>>>>
>>>>weblogic.jms.common.JMSException: Error creating connection on the
>>
>>server
>>
>>>> at weblogic.jms.client.JMSConnectionFactory.createConnectionInternal(JMS
>>>>ConnectionFactory.java:160)
>>>> at weblogic.jms.client.JMSConnectionFactory.createTopicConnection(JMSCon
>>>>nectionFactory.java:95)
>>>> at com.dynamex.decs.common.jms.DecsSubscriber.initialize(DecsSubscriber.
>>>>java:59)
>>>> at com.dynamex.decs.client.orderentry.swing.OrderEntry.initRMI(OrderEntr
>>>>y.java:1714)
>>>> at com.dynamex.decs.client.orderentry.swing.OrderEntry.<init>(OrderEntry
>>>>.java:124)
>>>> at com.dynamex.decs.client.orderentry.swing.OrderEntry.main(OrderEntry.j
>>>>ava:3180)
>>>>Caused by: java.rmi.MarshalException: CORBA COMM_FAILURE 1398079697
>>
>>No;
>>
>>>>nested
>>>>e
>>>>xception is:
>>>> org.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 209 completed:
>>>>No
>>>>
>>>> at com.sun.corba.se.internal.iiop.ShutdownUtilDelegate.mapSystemExceptio
>>>>n(Unknown Source)
>>>> at javax.rmi.CORBA.Util.mapSystemException(Unknown Source)
>>>> at weblogic.jms.frontend._FEConnectionFactoryRemote_Stub.connectionCreat
>>>>eRequest(_FEConnectionFactoryRemote_Stub.java:106)
>>>> at weblogic.jms.client.JMSConnectionFactory.createConnectionInternal(JMS
>>>>ConnectionFactory.java:139)
>>>> ... 5 more
>>>>Caused by: org.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 209
>>>>completed:
>>>>No
>>>> at com.sun.corba.se.internal.iiop.IIOPConnection.purge_calls(Unknown
>>>>Sou
>>>>rce)
>>>> at com.sun.corba.se.internal.iiop.MessageMediator.handleInput(Unknown
>>>>So
>>>>urce)
>>>> at com.sun.corba.se.internal.iiop.messages.MessageBase.callback(Unknown
>>>>Source)
>>>> at com.sun.corba.se.internal.iiop.MessageMediator.processRequest(Unknown
>>>>Source)
>>>> at com.sun.corba.se.internal.iiop.IIOPConnection.processInput(Unknown
>>>>So
>>>>urce)
>>>> at com.sun.corba.se.internal.iiop.ReaderThread.run(Unknown Source)
>>>>
>>>>
>>>> Does anybody have the experience? Can anybody give a hint?
>>>>
>>>> Thanks,
>>>>
>>>>Tony
>>>
>>>
>
-
OEL 5 - Cisco VPN connects proper, then in a few minutes times out
Issue
I installed the latest Linux Cisco VPN (e.g. on Oracle Enterprise linux)
Error
I get this-->
[user@localhost ~]$ vpnclient connect xyz
Cisco Systems VPN Client Version 4.8.01 (0640)
Copyright (C) 1998-2007 Cisco Systems, Inc. All Rights Reserved.
Client Type(s): Linux
Running on: Linux 2.6.18-164.el5xen #1 SMP Thu Sep 3 02:41:56 EDT 2009 i686
Config file directory: /etc/opt/cisco-vpnclient
Initializing the VPN connection.
Contacting the gateway at xxx.xx.xxx.xxx
Contacting the gateway at xxx.xx.xxx.xxx (balancing)
User Authentication for xyz...
Enter Username and Password.
Username [xyz]:
Password []:
Authenticating user.
Negotiating security policies.
Securing communication channel.
Your VPN connection is secure.
VPN tunnel information.
Client address: xxx.xxx.xxx.xxx
Server address: xxx.xx.xxx.xxx
Encryption: 168-bit 3-DES
Authentication: HMAC-SHA
IP Compression: None
NAT passthrough is active on port UDP 4500
Local LAN Access is disabled
Secure VPN Connection terminated locally by the Client
Reason: Remote peer is no longer responding.
Disconnecting the VPN connection.
[user@localhost ~]$
Questions
Even when I drop the OEL 5 firewall -- the remote peer will still "no longer respond"
Also, while the VPN is connected, browsers set to the proper proxy and mail do not connect and return data, etc...
Then it just does this -->
Secure VPN Connection terminated locally by the Client
Reason: Remote peer is no longer responding.
Any advise will be appreciated....
Thanks.....
Edited by: mheath on Dec 7, 2009 2:41 PM1) Note that I do understand that external mail will not work when connected to the vpn, only internal mail
2) When the vpn is connected, the following should work and both "do not work":
a) When pointing to the proper proxy, the browser should display "external pages like google" and internal pages..
b) And, internal imap mail should work - it does not
3) on a windows machine in the same exact subnet/network vpn works fine...?
4) Also, I have had vpn working with ubuntu 9.1x just previously in the same exact subnet/network!
5) ==> Something is not letting the vpn communicate "after" it is connected on the OEL 5 server ?
Thanks... -
Automatically create a custom VPN connection and set default wallpaper in a deployment...
Hey guys,
I've been hard at work on creating a custom deployment for our company to allow us to start rolling out Windows 7 at the first of next month. I demonstrated it to the brass today and they were blown away. All they asked for was two changes and I admit I'm stumped. Hopefully someone here can help:
1 - Set Default Wallpaper for *all* users: I've written a script to copy our company wallpaper to "C:\Windows\Web\Wallpaper" during a deployment. Is there any way I can modify that script to set that wallpaper as default for anyone who logs into that computer. Or if there's a non-script way to do this I'm all ears. I just need that wallpaper as default.
2 - Create a VPN Connection for our company intranet: Right now this is being done manually in the Network and Sharing Center. All they are doing is choosing "Set up a new connection or network" >> "Connect to a workplace" >> "Use my Internet Connection (VPN)" and just entering our VPN server IP Address and giving the connection a name. Surely there has to be a way to automate this with a script or something? Can anyone help?
3 - BONUS: This is just gravy, but if anyone can tell me how to "silently" or "automatically" disable the "Highlight newly installed programs" checkbox for all users using a script or something, that would be *wonderful*.
Can anyone help me here?1. Go here http://blogs.technet.com/deploymentguys/archive/2008/06/06/useful-script-number-5-adjusting-the-default-user-registry-hive.aspx . There is a script that will set your default wallpaper for you.
2. Does your company use a VPN client?
3. This option is set in the Registry. You could create a startup script or add this to your Task Sequence. Create the Dword and set it to 0 to disable highlighting.
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Start_NotifyNewApps
Rich
http://deploywindows7.wordpress.com/
Thanks for responding Rich,
1. I actually came across that script when I was poking around the Deployment guys forums, but I noticed that it did a lot more than just set the Wallpaper. I was trying to "keep it simple" plus the registry editing sort of made me nervous. I guess I can give it a go and see if it can be made to work for me.
2. Our company dos not use a VPN client. If you look back at my description of the process in bullet point #2 we are just using the Network and Sharing Center that is built into Windows 7 to create a simple VPN connection. That's why I'm so certain there has to be a way to automate this process. ll we are doing is entering an IP Address and giving the connection a name. Surely I can script that, or is there maybe some way to create the connection on one computer and save it as a file that I can then copy to each machine during my deployment?
3. Thanks for answering my bonus one too. Please forgive my ignorance because I am new to a lot of this. I assume I can create a "file" with the proper registry settings that can be applied during deployment right? I've seen people crate files that do this and use the .reg extension. Do you know how to make one of these or can you link me to a tutorial that steps me through it?
You could always edit the script to leave the other parts out. Thanks for the clarification on the VPN Client, just wanted to make absolutely sure. Let me know how if the process you found works for you.
For the reg key, you would want to create the key I described, add it to your scripts directory, and then add a Client Build Custom Task in StateRestore to set the key in the registry. You can do this by adding a RunLineCommand to the Task Sequence. Then the command would look like this
cmd /c regedit /s %deployroot%\scripts\NameOfRegKey.reghttp://deploywindows7.wordpress.com/
Maybe you are looking for
-
Can anyone please tell me how to do CRM-XI scenario? Regards, N.S
-
Export - import between ASO and BSO cubes of different structure
Hi everybody! I have a 'large' ASO cube with information for a period of several years. I need to be able to load a smaller slice (e.g. one quarter) from the 'large' cube into a BSO cube with a different (simpler) structure , perform calculations and
-
I have joined and installed CC. When I open CC it shows that Photoshop C6, Bridge CC and PhotoshopCC are installed and uptodate. I can open Bridge CC and Photoshop C6, but Photoshop CC is no where to be found on my computer.
-
Upgraded to Yosemite 10.10.2 - no sound
I just upgraded to OS X Yosemite 10.10.2 and am not receiving any sound via headphones or speakers. My output is set to headphones, input is set to External Microphone. Please advise how to fix this.
-
Site Link Flooded By DAG Replication Traffic
Hi everyone, I have a quick question regarding DAG replication. We have a DAG that stretches two sites (one site is the primary site and the other site is strictly DR). The WAN link is 150 Mbps, and we have encoutered some issues with the network bei