Does 7.0.2 allow the video out via AV composite cable?

Hello,
I use the 30 pin to AV Composite cable a lot for work.
I teach, so I play movies and TV shows via this cable.
The TV sets are very simple LCD 6 year old TVs, so I can not rely on AirPlay.
Can anyone tell me if 7.0.2 is ok with AV composite cable?
Thanks in advance.
Sam

This support article will tell you what dock works with what phone & what cables you need to make it work.
http://support.apple.com/kb/HT1454

Similar Messages

I can't upload or import videos from my iphoto library, into final cut pro x. When i click, IMPORT MEDIA in FCP, It lists iPhoto Library as GRAY, and will not let me access it. I need the videos out of there. I have tried every way I can think of.

Like the title says...
I can't upload or import videos from my iphoto library, into final cut pro x. When i click, IMPORT MEDIA in FCP, It lists 'iPhoto Library' as GRAY, and will not let me select it. I need the videos out of there. I have tried every way I can think of.
I have also tried from the iphoto side, to export the videos or share them to final cut. I have had no luck.
I have tried to drag and drop indidual video clips from iphoto to fcp, and the programs simply do not respond to each other
I can see in the OLDER version of final cut pro x, where it has IMPORT FILES as an option, it was possible. I see this on forums and youtube videos of the older versions.
However, the newer version that i have, does not have IMPORT 'FILES' as an option, it is simply all lumped together as IMPORT 'MEDIA'
Thank You for the Help

at the end, you say "import preferences", which program are you describing?
So im safer using footage that is remotely being pulled from iphoto...
vs
using footage that is imported into FCP from imovie?
Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

How do you get the video out to TV to work on the iPhone 3GS

I cannot get the video out to TV to work on my iPhone 3GS with iOS 5.1.1.
I am using the $40.00 apple composite AV cables and nothing seems to work. With the cables connected to tv input nothing shows up in general settings for video out. Or anywhere else for that matter. I have tried many different TV's, sometimes I get audio but never never ever video . Does anyone else have this problem or better yet the answer?

Thanks for responding to my question about not being able to get the video out to work on my iphone 3GS. In answer to your question i couldnt get any video to work at all. But, i do know what was wrong now. The whole problem was the brand new $40.00 set of apple composite AV cables i just bought was no good. This afternoon i took a trip to the nearest apple retail outlet (30 miles away) with phone and cables in hand. And after doing a little head scratching of their own they decided to try another set of cables, and low and behold the darn thing worked like a charm.I was very impressed by the service at the apple store even though i didnt buy either product from them. I wonder if there is a bad batch of cables floating around out there because it looks like other people out there are having the same problem, which is why i didnt really suspect the cables. Thanks again for responding. Micdude001

The Video Out Problem...Fixed?

I know Wikipedia can be edited by virtually anyone with membership and an opinion, but I had to know.
It said that an itunes update 1.0.2 fixed the video out problem...does that mean that videos can now be connected to a TV and play on the TV? They fixed that?
I am still ever in the market for the nano, just waiting until the right ammount of money to purchase one. Thanks

I think it is currently working according to this knowledgebase article: http://docs.info.apple.com/article.html?artnum=300233
That is, for the new Nano, you can use the older iPod Universal Dock (ie the normal one that has been available for a couple of years) together with an iPod composite video cable or an SVideo cable (ie all currently-available stuff you may have already bought for a previous-series video iPod), OR you can use the brand new "Apple Universal Dock" with the brand new Apple Composite AV Cable or with the (new) Apple Component AV Cable, OR you can use one of those brand new Apple AV Cables directly with the Nano (without the new Apple Universal Dock).
What you cannot do is connect an old video cable or accessory, which was expecting to get composite video from the RCA/audio jack on the Nano, because it looks like (on the new Nano and the Classic) the audio out jack is now just for audio out and video is only available via the dock connector on the iPod.
ted.h.

I have an ipad, when I watch a video the audio does not match up with the video, how can I fix this?

I have an ipad and when I watch a video the audio does not match up with the video, how can I fix this?

Hello there, graciecloyd.
The following Knowledge Base article offers a few steps to try when an application is not functioning as expected:
iOS: Understanding multitasking
http://support.apple.com/kb/ht4211
If an app doesn't respond to your input, or doesn't perform as expected, do the following, testing after each step:
Check for app updates.
Force the app to close.
Restart your device.
Update your iOS device.
Learn more about troubleshooting apps.
On Step 2, close all applicaitons that are open. On Step 3, if the restart doesn't help resolve the issue, you may also want to try the Reset step in that article as well.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

I want to play video on my computer to make some analysis to frames,the problem that I face ,I can't change video frame rate using labview,but I can change frame rate to the video out of labview using some program

HI All
I want to play video on my computer to make some analysis to it's frames,the problem that I face ,I can't change video frame rate using labview,but I can change frame rate to the video out of labview using some program .
I used IMAQ AVI Read Frame VI
for example I have avi video It's frame rate is 25 fbs ,my image processing code is very fast that can process more 25 fbs,so I want to accelerate video acquisition

Hi abdelhady,
I looked into this further, and reading an AVI file into LabVIEW faster than its frames per second won't be possible. LabVIEW could read in frames faster than 25fps, but because it will be pulling the available frame at that point in time this would just give you duplicate frames. If you want to be able to read in frames at faster than 25fps, you would need to speed up your AVI file before reading into LabVIEW.
There's a good shipping example to show how to read in from an AVI file, "Read AVI File.vi". You'll notice that they add timing to make sure that the while loop runs at the right speed to match up with the frames per second of the file being read. This is to make sure you're not reading duplicate frames.
Thank you,
Emily C
Applications Engineer
National Instruments

The video out is NOT WORKING under 10.5.2

*APPLE please read this;*
The video out on the MacBook Pro is NOT WORKING under 10.5.2, or precisely is working with a possibility of 10%! Monitors doesn't find signal in, or when they find it, the image is unstable with green shadows.
_I tried 28 external monitor in a store and only ONE was working normally!_ I tried with all the cables combinations (DVI->DVI or DVI->ANALOG, with several different brand cables).
Before the 10.5 update, I didn't have any problem with external Monitor.
The point is that I have installed in the same computer (MAC BOOK PRO) also WINDOWS VISTA, and all the monitors that are not working with MAC OS are working perfectly under VISTA system.
I made a long research online and I found out that thousands of users have the same problem, but no one receive an answer from APPLE from several months!
This is not the only problem that I have under MAC OS 10.5, but them, are other topics.
_Please at least resolve this MAJOR problem that I and thousands of other users have with video out._
Thank you.
Leonardo Corbucci Zanobi
F I R S T A K E - STUDIOS
www.firstake.net

Video out under 10.5.2 works fine for me and for a colleague of mine with a more recent MacBook Pro. I'd wager it's a problem with your Leopard install, not a universal one.
Also, FYI, Apple doesn't read these forums; they're just for user-to-user help. If you want to leave MacBook Pro feedback for Apple, do so here:
http://www.apple.com/feedback/macbookpro.html
But again, I do not believe yours is a universal issue. We'll be happy to help troubleshoot though. What do you mean the image is "unstable"? Could you take a digital photograph of the external monitor's screen and upload it somewhere?

I use Keynote on iPad2. Video out via composite AV cable, audio out through earphone socket. If I plug into the earphone socket first, then the AV cable - no sound. AV first, then earphone - sound. Anyone know why?

I use Keynote on iPad2. Video out via composite AV cable, audio out through earphone socket. If I plug into the earphone socket first, then plug in the AV cable - no sound. AV first, then earphone - sound. Anyone know why?

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

Video out via firewire

Is color capable of outputing preview video through my DVCam deck via firewire? The option in the video out preferences seems to be grey out as are the other options in there.

I had forgotten I'd posted this and I need to make a clarification.
At the time of this posting, I'd been assured by Blackmagic Designs that Color would preview externally through their Intensity Pro card although in 8-bit video. Since the time of this posting and upon further query with BM tech support, I was told the Intensity Pro could not be used in this function.
Sorry if there has been any confusion caused by my statement.
Zeb

Does 06-28 update fix the video freeze w/ no sound problem??

I have been holding off updating my 5g 60 ipod for many months now due to the issue with the previous software NOT addressing two know issues (thanks to this site):
1. the video freeze..then playing with no sound issue.
2. the ipod not playing a song when
(just staying at 00:00) comming out of
hybernation and hooking up to a different headphone
jack.
I currently have the Oct 05 update and that fixed my video issue...but still have to yet to resolve the second issue.
Does this latest update (06-28) do the trick..?
Please let me know..thanks

did some searching and did not find a conclusive answer on this... thanks

Does iPhone do Video Out via video cables?

I can't find any reference to this in the iPhone user guide, so I'm guessing it can't, but I thought I'd ask here.
Can iPhone send video out to an external TV using the iPod Video Connection Cable?

This might help.
http://www.cellphoneshop.net/auviacaforap.html?ovchn=INK&ovcpn=sitematch&ovcrn=c ellphone&ovtac=PIB

Confused about the video out

If the video card is the same as the one in the Macbook Pro, and the VRAM is hte same (I have 256 in each), why did the macbook pro have dual link to drive a 30" monitor and the imac does not? that seems "silly" to me.

Tim is right, apple likes to differentiate the consumer level computers from the pro level. For the longest time, all the consumer level computers could only do video mirror, not extended desktop. I think with the concept of media center, apple changed that so that the computers could be used as a media center computer, hence the extended desktop support.
Glor

HT2240 CAN I EDIT AND TAKE PIECES OF THE VIDEO OUT OF THE VIDEO WITH QUICKTIME?

I want to edit a video and take out portions I do not want there for a video post. How do I edit out (trim) out bits I do not want and then save the new video?

These steps assume you've got the Pro version of QuickTime Player 7 for Windows:
Open the file you wish to edit and move the playhead (you can slide it and use the right/left arrow keys to adjust) to the first frame of the video you want to remove.
Use the letter i key to create an "in point". You'll see a small marker at the bottom of the timeline noting your place in the file.
Adjust the playhead to the last frame you wish to edit and use the letter o key to set an "out point". You'll see another marker and the edit area is highlighted in the timeline. This is known as a "Selection".
From the Edit menu you can "Cut" or "Delete" this selection.
Repeat those steps until you've removed what you want from the original file.
File menu and choose "Save As". Pick a save location and give the file a new (different) name.
Done. Your original file is left untouched by those edits.

Premiere Elements 11 is adding a red tint to all the video out create

I have put two clips of .mts video on my timeline. When I watch the video from the timeline, it looks great. However, when I output the video (in any format) it has an awful red tint. I've tried several output options (different version of mpg as well as different version of avchd). They all have the red tint.
Here is a link to the video. You can easily see the red tint. This is not the way the video looks from within Premiere Elements. Also, I know that Youtube is not the source of the tint, because the tint appears on all the files that I output from Premiere Elements onto my hard drive.
http://www.youtube.com/watch?v=p6zimlsmJdI&feature=youtu.be
What is causing this, and how can I prevent it?

OK. Here are some screenshots that I hope illustrate the issue I'm dealing with. This first picture shows what the video looks like on the preview screen from within PRE. The image is taken from my Acer external monitor at home. Notice the natural looking skin tones.
After creating an .mpg version of the file and saving it on my hard drive and viewing it with Windows Media Player on my Acer external monitor, this second picture shows what the image looks like. Notice the red tint on the skin.
This third picture shows the same .mpg file as it appears on the built-in screen on my laptop. Notice that the skin tones look a little more natural, but they still display some red tint. They definitely don't look as natural as the skin tone in the first picture (as the image appears from the preview screen within PRE).
A few extra notes: I realize that these images may appear differently to other viewers whose monitors will display them differently. However, I think that comparing the first image in the series with the second two will show a significant change in skin tone.
A second note: When I view the .mpg file on my ViewSonic monitor in my office, the red tint on the skin tone is almost gone.
A third note: Because the ViewSonic external monitor doesn't seem to have the red tint problem, it seems to point to a problem with my Acer external monitor. However, as the images above show, the built-in screen on my laptop also shows the red tint. But, more importantly, if the problem is with my Acer external monitor, then I don't understand why it shows such natural skin tones on the image displayed within PRE preview window.
A final note: I attached a screen clip from the image as it appeared on an .mpg file. However, the same red tint appears on several version of .mpg as well as .mp4 files that I created with PRE.
Thanks for helping me figure this out.
Danny

Adobe PDF converter does not convert and include the videos from websites when completed

Have just recently upgraded to Acrobat Pro X and have attempted to convert several on-line websites to PDF's. In each and every case, the videos were not included in the final conversion to PDF.
Not sure if there are specific settings that I need to address or if I am doing something wrong here. Have been told by colleagues it should be a simple click to achieve these results and that Acrobat X does convert and include videos. These videos are in Adobe Flash Player format 11.1.102.63. Not sure where to go from here, any assistance greatly appreciated!

In the IE toolbar, under the PDF Convert button, select Preferences. Click on the Conversion Setting button under the General tab and make sure that "Embed Multimedia Content when possible" is selected.

Does 7.0.2 allow the video out via AV composite cable?

Similar Messages

Maybe you are looking for