Does 750gb drive module work with old generation xserve g5?

i would like to replace my drive module in my xserve g5 running ver 10.3.9 with apples 750gb sata drive modules. My problem is can't get a straight answer from anyone about whether or not it will work with my xserve.
Any ideas?

They do.. a 750GB SATA ADM will work perfectly fine on both the intel and the g5 xserves. It says explicitly on the box "Intel xServe required" but after talking to a enterprise tech, he stated that apple "has not fully officially tested on the g5 cause its a discontinued machine.. aka, they refuse to write that it is "supported".
Didnt stop me from buying one and using it for hot swapping between my g5 and intel tho.. works like a charm.

Similar Messages

I just received a new macbook pro. I am looking for a usb3 external storage 500 GB drive. Some manufacturers of drives aren't for sure their drive will work with the new lion system. Does anybody have any suggestions for drives that will workw

I just received a new macbook pro. I am looking for a usb3 external storage 500 GB drive. Some manufacturers of drives aren't for sure their drive will work with the new system. Does anybody have any suggestions for drives that will workw

There seems to be a problem, just now, with the USB 3 ports on the new MBP's supporting eternal USB 3 drives. Some people have no luck at all - can't even recognize the drive - and some are reporting USB 2 speeds (those who drives are recognized). I'd call a dealer such as LaCie or OWC to see if they have USB 3 drives that actually work with MBP's with USB 3 ports. You may have to wait for a software/firmware update.
Clinton

Does parrot ar drone work with ipad 3 generation ?

Does parrot ar drone work with ipad 3 generation ? Because i was wondering if i should buy the ipad 3 generation

Does the app store state that it works with iOS 5? Then yes it will.

HT3258 help!....i have macbook with lion 10.5.8 op because protools does not work with snow leopard, now i bought "traktor" which does not work with old op sys, can´t find a suitable update anywhere, what to do ? pete

help!....i have macbook with lion 10.5.8 op because protools does not work with snow leopard, now i bought "traktor" which does not work with old op sys, can´t find a suitable update anywhere, what to do ? pete

According to Roaring Apps, there is a version of Protools compatible with Lion. But you may need Snow Leopard 10.6.8 to buy either Lion or ML on MAS. It looks like you need to get up-to-date with your OS and the apps too.
http://roaringapps.com/apps:table/tags/_t/index_tags/_t/p/2
http://roaringapps.com/apps:table/tags/_p/index_tags/_p/p/3

Is it possible to have your whole family on one apple id or is it better to have each person have there own? If each has their own does each id have to buy their own music and apps? How does find my iphone work with one apple id or two?

Is it possible to have your whole family on one apple id or is it better to have each person have there own? If each has their own does each id have to buy their own music and apps? How does find my iphone work with one apple id or two? also I am going to be going off to college soon should I make an itunes id for my self and how will I get all the music from the old id?

Is it possible to have your whole family on one apple id or is it better to have each person have there own?
Yes, it is possible. 1 apple ID can be associated with up to 10 devices.
If each has their own does each id have to buy their own music and apps?
Yes, all purchases are non-transferable.
How does find my iphone work with one apple id or two?
Every device associated with one apple ID through Find my iPhone is tied to that Apple ID; Find my iPhone will work in the same way with up to ten devices associated with one apple ID. You cannot enable Find my iPhone for one device across two apple IDs
I am going to be going off to college soon should I make an itunes id for my self and how will I get all the music from the old id?
If you have authorized a computer with the old apple ID, you can transfer old media purchased through the old to other devices via iTunes. This doesn't mean the media purchases through the old apple ID it transferred to the new account. If you plan to make future purchases and don't wish to share them with others, make your own apple ID.

Is there a way to connect an old Sunflower iMac (OSX 10.4.11) to a new Time Capsule? It used to work with old Airport Extreme with updates thru Snow Leopard but now seems to only allow WEP encryption instead of WPA.

Is there a way to connect an old Sunflower iMac (OSX 10.4.11) to a new Time Capsule? It used to work with old Airport Extreme network, run from a intel iMac with updates thru Mavericks but now seems to only allow WEP encryption instead of WPA and can't connect to Time Capsule. Airport Extreme Base was controllable from either computer up through Snow Leopard (I didn't do any of the Lion upgrades). Then when I upgraded to Mavericks I lost the ability to use Airport Utility with this hardware on the Sunflower but could still connect wirelessly to network without any problems. But now with the Time Capsule upgrade the Sunflower is blocked from network by a dialogue that requests ony WEP password, not WPA pwd used by Time Capsule. Neither can I use the old airport extreme base to extend the time capsule network since I can't input the correct password/encryption approach to join it. Is there a work around? Would a newer but old Airport Express be able to extend network to Sunflower? Or maybe a third party wireless (such as Netgear, Dlink, etc) that has browser type control rather than special utility?
Another question--before I used MAC addresses to control who could access network. Now on Time Capsule I don't see anything about this--so is it true now that the only access control is via WPA2 pwd now (which appears to be the encryption pwd and not the time capsule pwd)?

Is there a way to connect an old Sunflower iMac (OSX 10.4.11) to a new Time Capsule?
I can’t claim to completely grasp the issue(s) you’re describing, but the underlying problem is presumably your iMac’s obsolete AirPort card. Whatever the case, an obvious (if not particularly helpful) answer to your stated question would be to connect your iMac with an ethernet cable, using powerline adapters as an alternative if you don’t want to have wire running all over the place.
My still fully functional clamshell iBook, with an original AirPort card, connects wirelessly to my 4th Generation TC network by means of a cheap 802.11b/g/n USB Wi-Fi adapter. This might be an option for you too.
Another question--before I used MAC addresses to control who could access network. Now on Time Capsule I don't see anything about this
When you edit your TC's settings the access controls appear under the Network tab, don't they?

Am using 2007 iMac running 10.4.11. Do not wish to upgrade now. Where can I find an external hard drive to work with it? Also need a printer?

I'm using a 20" iMac that I purchased in 2007. It's running OS 10.4.11, and still doing beautifully. But I've got to get serious about upgrading and I don't want to lose the material that's on it.   Purchased an external hard drive about two years ago, copied everything I wanted at that time on to it. When I tried using the h.d. a few days ago it was garbled. Now I see that inside the box it says that it requires OS 10.5+.   Anyone know if there's still a new hard drive out there that would work with 10.4.11?   Can't even find thumb drives to work with my system anymore.   Any ideas would be appreciated.

If I were you I would bite the bullet and upgrade to Snow Leopard. You will still be able to use AppleWorks by installing the Rosetta emulator included in Snow Leopard. And, it's a much better OS version than Tiger.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
See App Compatibility Table - RoaringApps.

Does the ipod video work with the original ihome?

does the ipod video work with the original ihome?

Welcome to Apple Discussions!
If you mean this one...
http://www.ihomeaudio.com/products.asp?productid=10015&deptid=1003
Them yes. I am using one myself. You may want to purcahse these if it does not come with them (depending on how old it is)
http://www.ihomeaudio.com/products.asp?productid=10016&deptid=1000
btabz

Does Adobe Photoshop Elements work with MacBook Pro with Retina display?

Does Adobe Photoshop Elements work with MacBook Pro with Retina display, please?
Have searched Adobe website for answer - most recent is 2013 answer, saying no.
Contradicted by a staff ember who only referred to Photoshop, not Elements.
Reason I need it is that iPhoto does not support very high resolution photos - which I have now scanned onto my MacBook and do not want to re-scan!! After 90 minutes at my local Genius bar (lovely folk, very conscientiously searching for an answer...), re-scanning was their final piece of advice.
Help, please...

Hello Smis,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand you are having issues with your HP Monitor on your MAC. I am providing you with an HP Support document: Updating a Monitor Driver, where it states under the sub-heading Using HP monitors on a Mac "HP monitors are not supported in a Mac environment. However, newer Macs use graphics with VESA modes and can display to most HP LCD monitors. To do this, connect the monitor to the Mac while the Mac is off, and then turn on the MAC. The monitor should operate at 60Hz. The INF and software for the HP monitor are for Microsoft Windows and cannot be run in a standard MAC OS environment."
This being said all I can advise is that you check to see that the monitor is set to operat at 60Hz and contact Apple for assistance if that does not get your monitor displaying correctly.
I hope I have answered your question to your satisfaction. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Can LabView FPGA module work with non-NI FPGAs?

Simple Question: Can the LabView FPGA Module work with other FPGAs? Im assuming yes, but id like ot make sure first. Normaly I go with NI for most of my stuff, but they just are lacking in the FPGA hardware for what I need, but Im accustumed to LabView so I would like to stick with that to program it.
Thanks!
-Mark

Using LabVIEW and LabVIEW RT you can access the registers on any PCI/PXI card using the NI-VISA driver. NI-VISA also allows you to handle interrupts and DMA data. For interrupts you will not actually write an interrupt service routine (ISR) in LabVIEW. Instead the VISA driver will acknowledge the interrupt to the card and then pass a VISA event to the LabVIEW application letting the application know that it needs to process the interrupt. Detailed information about this type of programming is available in the following documents.
Using the VISA Driver Development Wizard and NI-VISA to Register-Level Program a PXI/PCI Device unde...
Configuring LabVIEW Real-Time and NI-VISA to Recognize a Third Party Device
Configuring LabVIEW Real...
Developing a LabVIEW Real-Time Driver for a PXI or Compact PCI Device
Porting a Windows PCI Device Driver to LabVIEW Real-Time
Considerations in Implementing LabVIEW Real-Time Drivers
Christian L
Christian Loew, CLA
Principal Systems Engineer, National Instruments
Please tip your answer providers with kudos.
Any attached Code is provided As Is. It has not been tested or validated as a product, for use in a deployed application or system,
or for use in hazardous environments. You assume all risks for use of the Code and use of the Code is subject
to the Sample Code License Terms which can be found at: http://ni.com/samplecodelicense

Does Labview v6.1 work with WinXP?

Does Labview v6.1 work with WinXP? I know 7.0 is compatable but it is
missing the DAQ vi library.

Hi,
LabVIEW 6.1 is compatible with Windows XP. The DAQ VIs may be missing
since they are intalled by the DAQ driver. If you do have the driver
installed is just a matter of runnign the NI-DAQ installer again from
Add/Remove programs, select modify and make sure that support for
LabVIEW 6.1 is selected. This should bring the DAQ VIs back up.
let me know if you have any further questions.
Regards,
Juan Carlos
N.I.

Does The Airport Express Work with Any Router?

Hi Forum,
i have an old Linksys router G Wifi speeds, does the Airport Express work with this?

The AirPort Express or other Apple routers will not wirelessly extend the signal from your Linksys router, if that is what you are asking here.
If yes, use another Linksys product to insure compatibility between devices.

I'm using iTunes 9 and I recently just bought AirPort Express. I have used it before in the past put the problem I have now is that I cannot select the Express network for my speakers. Does Airport Express only work with iTunes 10 or 11?

I'm using iTunes 9 and I recently just bought AirPort Express. I have used it before in the past put the problem I have now is that I cannot select the Express network for my speakers. Does Airport Express only work with iTunes 10 or 11?

Hello Hornet12,
Indeed, iTunes 10.2 or later will be required to utilize AirPlay.
Using AirPlay
http://support.apple.com/kb/HT4437
AirPlay requirements and capabilities
To get full AirPlay features, make sure your AirPlay-enabled devices are running the latest software updates. The table below identifies minimum AirPlay requirements and capabilities:
Stream content from
Requirement
Notes
iPad
iOS 4.3 or later.1
From the Videos, iPod, Photos, Music, and YouTube apps on iOS devices, stream videos, music, and photos to an Apple TV (2nd and 3rd generation), or stream music to an AirPort Express or compatible third-party device.
With iOS 4.3 and later, you can also stream video and audio from a website or a third-party app installed on your iOS device if the developer for the app or website has added AirPlay functionality.
iPhone (3GS or later)
iPod touch
(2nd generation or later)
Computer
iTunes 10.2 or later.
Stream videos and music from your iTunes library to an Apple TV (2nd and 3rd generation), or music to an AirPort Express or compatible third-party device.
Apple TV
Apple TV software version 5.1 or later.
Stream music from your Apple TV to another Apple TV (2nd and 3rd generation), to an AirPort Express or compatible third-party device.
Cheers,
Allen

Does ipad 4 A1460 work with CDMA ?

Hi
I have unlocked ipad 4 from saudi arabia model
A1460 on the iPad (4th generation) Wi-Fi + Cellular (MM)
Now I'm In yemen i have few question
does ipad 4 A1460 work with CDMA network in yemen (YEMENMOBILE) ?
if it work can i switch b/w CDMA and GSM when i move b/w Yemen and Saudi ?
can i buy cdma data plan +sim card and install it in ipad ? or there is other way ?

The A1460 model is infact CDMA capable.
Maldukhn wrote:
does ipad 4 A1460 work with CDMA network in yemen (YEMENMOBILE) ?
Probably not. CDMA unlike GSM is not unlockable. The Settings for CDMA networks must be provisioned into the CDMA chip at the time of manufacturing, and its very difficult to modify this after the fact. Also CDMA devices must be registered with the carrier they will be assigned to. They must exist in the carrier's database beforehand.
Maldukhn wrote:
if it work can i switch b/w CDMA and GSM when i move b/w Yemen and Saudi ?
If the Yemen provider issues you a Sim card, you can insert that into the GSM sim card slot on the iPad and connect to their network that way, again if they support it. This would not be CDMA but GSM.
Maldukhn wrote:
can i buy cdma data plan +sim card and install it in ipad ? or there is other way ?
No such thng as a CDMA sim card. sim cards are only for GSM. Again if the Yemen carrier offers sim cards to connect to their network you can insert it into the sim card slot and use their service that way if they support it as such.
I suggest you contact the Yemen carrier and ask about their device policies. BYOD (Bring Your Own Device) is not normally an accepted policy with CDMA carriers.

Does microsoft office 2011 work with lion

does microsoft office 2011 work with lion

...since upgrading from a Macbook pro to a retina pro (with the latest OS) I cannot get Outlook to work, it freezes when I try to add my email accounts info...
The latest OS is 10.8.2. You've posted in the Lion (OS 10.7.x) forum.
...I don't have a clue what can be going wrong, it was all working fine on my macbook pro with Snow Leopard and the same setup is not working with Mountain Lion on the retina, ...The only reason I upgraded from Office 2008 was because I couldn't get it to stop closing down every few seconds with 'a problem'...
Different operating systems canNOT be the "same setup."
In my original installation of Office 2011 on a 2007 MBP with OS 10.6.8, I followed the guidelines Tips for a Successful Install. In launching Outlook 2011 for the first time, it recognized that I had Entourage 2004 and I was chose the option to have all the data transferred to Outlook 2011. While that was well over a year ago, I'm fairly certain that I did not need to manually set up my multitude of existing email accounts. Subsequently, I've added new accounts. A couple of months ago, I got a new mid-2012 MBP (non-retina) with OS 10.7.4. I used Pondini's advice , which I found here in the Apple Support Community for OS 10.7, to setup the new MBP from the old MBP with Setup Assistant. Afterwards, I manually installed my applications. I am certain that I did not need to manually setup any email accounts when I launched Outlook 2011.
That said, if you did not fix the problem that you were experiencing with Office 2008 (and more specifically Entourgage 2008) but migrated that data to your new rMBR, then your problem may lie within the old data. You have not provided information on how you installed Office 2011, if your setup of Outlook is as new or datea ported from Entourage, and what troubleshooting steps you have tried. As Kurt Lang suggested, the Microsoft Community would be best with your specific issues as stated.
HTH

Does 750gb drive module work with old generation xserve g5?

Similar Messages

Maybe you are looking for