Does 785GM-E51 DVI support dual link?

I am considering buying the 785GM-E51 motherboard which comes with a DVI port (as well as HDMI and VGA of course).
Will the DVI support dual link?  If so, what is the maximum resolution I could have on the two monitors (say, at 60 Hz with high colour depth)?
Cheers!
jcarrete

 Please clarify your question, dual link has nothing to do with being able to use two displays.
"Dual-link should not be confused with dual display (also called dual head), which describes those situations where a computer is hooked up to two monitors at once. "
 That quote from here: http://en.wikipedia.org/wiki/Digital_Visual_Interface
 That been said I think you should be able to have 2 displays, 1 DVI or HDMI + VGA You can't have 2 digital out at the same time though, DVI + HDMI.

Similar Messages

  • Does 10.5.6 Support Dual displays for Radeon 9800 Pro Mac Edition cards?

    Does 10.5.6 Support Dual displays for Radeon 9800 Pro Mac Edition cards?
    And is there driver updates for anyone using the all-in-ones HP printers...has anyone been able to use their scanners since the update? and has the dual screen support been added to avoid the blue screen on startup?

    The ATI Radeon 9600 PC/Mac edition 256 MB should work in the MDD G4. It has two DVI ports (one is dual-link and can support a 30" display). You will need adapters for ADC displays.

  • No display when connect DVI-D dual link cable

    Hi
        I am using MS-6398 motherboard and I have the latest Bios 5.60.  when I connect DVI-D dual link cable from ATI All-In-Wonder 8500DV graphic card to my SONY SDM-M81 Flat Panel.  There is no display at all during POST as well as after boot up. It has display only if I connect with regular analog VGA cable.  I have contacted the ATI tech support and they ask me to contact the manufacturer of my motherboard because it don't have display during POST which is nothing to do with driver.
    thanks,
    Siong

    DVI-D port on the Ultradock is single link only.
    If you need DVI-D at dual link resolution (i.e. 2560x1600), you need an active displayport to dual link converter. Startech makes them, they should be around 80 USD or something of that region.
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • Does K8D Master-FT support Dual core Opteron?

    Hi,
    Does K8D Master-FT support dual core Opteron? I saw the latest BIOS was released at 2003/12/11 and said to support for all series of AMD Opteron(up to 248, SC, 2.2GHz/1M).
    Thx, Xuekun

    Sorry I only looked after his question.
    The entire K8D-Master3 series has support for it: >>Link<<

  • Q: DVI-D Dual Link docking station for Elitebook 8530w?

    Are any of the following Dual Link DVI-D ?
    Thanks in advance!
    Adam
    Models HP 2008 120W Docking Station
    KP080AA#xxx
    HP 2008 150W Docking Station
    KQ751AA#xxx
    HP 2008 150W Advanced Docking Station
    KP081AA#xxx
    HP 2008 180W Advanced Docking Station
    KQ752AA#xxx

    No problem. It is an older monitor. But being a small business, we can't afford to discard a working monitor that costs $1500 to replace.
    The annoying part is that we tried to do a lot of research prior to purchase to find out exactly what resolutions the Lenovo docking solutions supported. We asked our rep to check because of the total lack of Lenovo documenation on this. We would not have wasted all this time trying to get it to work if we had known.
    Even now, no one from Lenovo has come right out and stated that their docking stations don't support Dual Link. I think that they actually have no idea.
    We've been bounced around and around between the same Lenovo sales, support and customer service numbers so many times in the past three days that they are now just dropping our calls in the hope that we will go away. No one at Lenovo has offered a solution of any kind.
    FYI, we've even been told that because we ordered the W540 through CDW that there is 'nothing Lenovo can do.'

  • DVI-D Dual link and DVI-D Single link

    I have here a FPD2185W Gateway 21" monitor that will not connect to my mac via the MBP's DVI port. I sent in the Mac for repair and it was sent back saying "everything is A-OK". Now my question is, are the cables that i am using effecting the functionality because i know the monitor works on a PC via DVI, but not the mac. The Cable im using now is a DVI-D Dual Link cable. would it be wise to try the Single link cable? I am pretty sure i have tried everything, and am desperate to get a DVI signal going to my monitor instead of the VGA.
    -thanks, grant

    Do a Google search on "FPD2185W Mac" and you'll see quite a few problem reports. It seems like the Gateway display is the problem and just won't work properly with some Macs.

  • NX7600GT-T2D256EZ 2560x1600 supported via DVI-D dual-link?

    Does my NX7600GT-T2D256EZ support a resolution of 2560x1600 via DVI-D dual-linkto drive a Samsung SyncMaster 305T?
    I am using Vista x64.

    pmeinl,
    The 7600GT Chipset should go to a Max Resolution 2560 x 1600.
    Take Care,
    Richard

  • No Video from Mini-DisplayPort or DVI, only Dual-Link DVI

    Just got my new Mac Pro 6-Core delivered. Out of the box, there were problems. I have a Dell 27" monitor that takes Dual-Link DVI, DisplayPort, or HDMI and a Dell 22" monitor that takes DVI, VGA, or HDMI. I am using a DisplayPort to Mini-DisplayPort cable to connect my 27" monitor to the Mac Pro and a DVI cable for my 22" monitor. I have the ATI 5870 graphics card installed OEM.
    The problem is that the graphics card appears to not be switching to Mini-DisplayPort or DVI for output. It only works when I plug in a Dual-Link DVI cable to my 27" monitor. At that point, I get a video feed on my screen on a hard boot. At this point, I can then plug in my Mini-DisplayPort cable to my Mac Pro and unplug the Dual-Link DVI cable, and it switches video feeds perfectly. The problem then is that when I restart the computer, or power off and power on, the problem starts all over again. I HAVE to boot using the Dual-Link DVI cable for anything to work.
    Ideas? Called AppleCare, waiting on engineering to see what they have to say. All the cables work perfectly when I plug them into my MacBook Pro (Late 2008). I am stumped.

    I seem to be having similar problems. I bought the same system (6-core Westmere with the 5870 graphic card installed OEM) last month and I seem to be having problems running two Dell monitors which I know to be perfectly fine.
    For the past month, I've been using a 24" Dell U2410 monitor with my Mac Pro using a DVI cable. Absolutely no problems at all. I then purchased another 24" Dell U2410 with the intention of running with dual displays. To prepare for this, I bought two mini-DisplayPort to DisplayPort cables from Monoprice. When I finally received the second display, I turned off the computer, hooked up both monitors through DisplayPort using the two mini-DisplayPort connections on the graphics card and turned on the system. I got two black screens. I tried to use keyboard commands to bring up the shutdown dialog box but it wasn't working. So I was forced to do a hard shutdown by holding down the power button for 10 seconds.
    I went through a series of combinations of power cycles for the displays and computer and still two black screens. Finally, I went back to square one, a single display through a DVI cable. Again, a black screen. At this point, I disconnected the display from the computer. Power cycled the display (this initiates the self-test for the Dell display), hooked it up to the Mac Pro, turned it on, and it worked. I had one working display. Then I plugged in the second display using the mini-DisplayPort to Display port cable and that worked also. Finally, two working displays. For some reason, the Mac Pro recognized the display using the DisplayPort as the primary monitor. I rebooted the Mac Pro and the monitors continued to work properly. I booted into Windows 7 and again, no problems. I went back to OS X and used the computer for the night. When I was done, it put it to sleep.
    This morning, when I tried to wake it up, same problems. I had to go through a series of power cycles and cable swapping to finally get a single screen to work.
    I went through some of the troubleshooting documents here in the Support area and found this one:
    http://support.apple.com/kb/HT4279
    I am going to pick up the Apple mini-DisplayPort to DVI adapter and try running the display as two DVI monitors. Hopefully this will fix those problems. If the AppleCare engineer is able to give you anymore information, please let us know. This is a worrisome issue.

  • Macbook air to dual monitors (DVI and dual link DVI)

    Hi i have MacBook Air (13-inch, Mid 2013), which only has a mini-displayport input.
    i have these two monitors, one monitor has DVI, VGA, HDMI, and the other monitor has only Dual-link DVI-I.
    http://www.newegg.com/Product/Product.aspx?Item=N82E16824014373&cm_re=benq_27_in ch-_-24-014-373-_-Product
    http://overlordcomputer.com/collections/27-monitors/products/tempest-x270oc-glos sy
    is it possible to have dual monitors from this? If so, what cable do i need? thanks.

    You'll probably want something like this:
    Mini DisplayPort to DVI (2x DVI Output) Converter
    http://www.monoprice.com/Product?c_id=101&cp_id=10114&cs_id=1011409&p_id=8118&se q=1&format=2

  • Thunderbolt hub with dvi-d dual-link, daisy chain that isn't too expensive?

    I've been following a number of thunderbolt hub progress for 2 years now, and STILL can't find one that I need.
    UTTERLY MUST HAVE dual dvi. This means a minimum resolution of 2560x1440, which is what my current 27" IPS monitor does.
    UTTERLY MUST HAVE gigabit ethernet. Wireless N does not cut it.
    Really nice to have a daisy chain so I can hook it to my thunderbolt external drive, but not critical.
    NICE TO HAVE a power out so I can power my MBA from it, e.g. have two cords - thunderbolt + power, so I don't have to carry a spare power adaptor to the office.
    Basically what I've been seeing is either DVI single, or hdmi, or no daisy chain, or no video at all.
    Here's things I've looked at that DON'T cut it:
    http://www.newmagic.com.au/products/Matrox/Editing.asp#fragment-6
    http://www.belkin.com/us/support-article?rnId=8415
    http://www.caldigit.com/thunderboltstation/index-ee.html
    Oh, and just to pre-empt the guy who who inevitably suggest that I just buy a new apple display (as if they are worth throwaway money): NOT AN AFFORDABLE SOLUTION, please just move on.

    I don't believe that a product exists that meets all your requirements, though it's possible I've missed something. Probably the only way you'd get even the primary two requirements is to get an expansion chassis and add the appropriate PCI cards, and that's not going to be cheap.
    Regards.

  • Does pages 6.0 support internal links to other pages?

    I want to create links inside of Pages 6 to take the reader to other locations in the document. I need to have these fully functional links exported with the document into pdf. Has anyone actually tried this in 6.0? Des it work?

    Keynote is a version number ahead of Pages, because it was the first iWork app that came out. Numbers was the last and is one version behind.
    Pages '09 has Bookmarks that do the internal linking.
    It is Pages 5.2.2, the current version, that is brain dead.
    Peter

  • Does iPad 3rd generation support dual band wi-fi ?

    What is the wi-fi IEEE standard used for iPad 3rd Generation ?
    Does it capable of communicating with 2 bands (i.e. 2.4 GHz & 5 Ghz) ?
    Thanks.

    IPad 3
    Wireless and Cellular
    Wi-Fi
    Wi-Fi (802.11a/b/g/n)
    Bluetooth 4.0 technology
    Wi-Fi + Cellular
    Wi-Fi (802.11a/b/g/n)
    Bluetooth 4.0 technology
    Model for AT&T: 4G LTE (700, 2100 MHz)3; UMTS/HSPA/HSPA+/DC-HSDPA (850, 900, 1900, 2100 MHz); GSM/EDGE (850, 900, 1800, 1900 MHz)
    Model for Verizon: 4G LTE (700 MHz)3; CDMA EV-DO Rev. A (800, 1900 MHz); UMTS/HSPA/HSPA+/DC-HSDPA (850, 900, 1900, 2100 MHz); GSM/EDGE (850, 900, 1800, 1900 MHz)
    Data only4

  • New Dual-Link Adapter on Gateway 30" Monitor, Thinks DVI!

    I have the new dual-link cable attached between my macbook pro and a Gateway 30" Display. For some reason my display is only detected as having a regular dvi cable attached and won't support a resolution higher than 1920X1200. The monitor itself is capable of 2580X1600 and works on a Windows pc this way.
    Do I have a defective cable or is there something I'm doing wrong?

    Not that it matters, I suppose... But I'd like to know who it is that is diverging from the Dual-Link DVI specification. If the panel works with any brand and model of 'PC' graphics card that supports Dual-Link but does not work with Apple's Dual-Link DVI port, who is really the culprit? That's assuming it's a hardware issue.
    If it's a software/driver issue, then I see no reason that this wouldn't be fixed by Apple as other third party hardware support issues are fixed by them all the time. Some might say that Apple ensuring more sales of their own displays is the reason, and they may be right, but I find that a disservice to the end user.
    I'm staying steady on with the monitor as on January 9th the real reason for it's purchase will arrive: A Penryn-based PC with 3 Nvidia 1GB GTX 280's running in 3-way SLI. This year I switched to Mac after 20 years of Windows. However, after 20 years of being a hardcore PC gamer, I accepted that my changeover would come with the price of having to maintain two systems: One that can play some games, and one that can play all games, and play them at the top of their performance potential. It will be my first Vista machine, and I enjoy the humor in the fact that it will never be used for anything other than playing games. (Anyone who understands what '20 years of hardcore PC gaming' means will know not to bother uttering the word, 'console'.)
    I'm going to keep Googling around to see if I can find any evidence of someone running a previous gen MBP with this monitor. If it's a bust, I'll cross that bridge when I come to it. I may still switch back to a previous gen as I have a couple other issues with the new one, but either way, I'm still super happy that I've made the switch to OS X and I can't imagine ever going back.
    Though I'll be making daily visits for things like this:
    http://img299.imageshack.us/img299/3672/00012hm8.jpg
    http://img254.imageshack.us/img254/618/00013ys5.jpg
    http://img258.imageshack.us/img258/5006/29378126jl1.jpg
    I can't get over how much those last two images look like where I live:
    http://picasaweb.google.com/billymogg/Saba2007# (Not my photos, but a good collection of shots from the 5-square mile island I live on. Not 5 miles square, mind you.

  • Is an Apple ACTIVE Mini DisplayPort to Dual-Link DVI Adapter the same thing as an old Mini-DP to DVI adapter?

    Is an Apple ACTIVE Mini DisplayPort to Dual-Link DVI Adapter the same thing as an old Mini-DP to DVI adapter?
    Will a different adaptor give me better resolution between my old computer and a new monitor?
    Computer: MBP 15-inch Mid 2010
    Monitor: Dell U2713H
    Current cable: 20276 3dv ft1 DVI Digital Dual Link with a Apple Mini-DP to DVI adapter to get it to plug into my MBP.
    Possible solution?: Apple ACTIVE Mini DisplayPort to Dual-Link DVI Adapter instead of my old adapter above?

    Yes. A single-link DVI connection can't drive that monitor at its maximum resolution.
    (110544)

  • Monitor does not come out of sleep Mac-Mini Mini-DVI to Dual  DVI-D cable

    I have an August 2009 Mac-Mini that I'm using with an Apple supplied Mini-DVI to DVI adapter along with a DVI-D Dual Link Cable connect to a Sceptre X7XV-Naga+ LCD monitor.
    The monitor is going into sleep mode on its own with no way to disable this feature on the monitor itself. I've disabled sleep mode on the Mac-Mini in the power setting in System Preferences.
    When in sleep mode and I move the mouse or press a key, the monitor will not come out of sleep mode. From other posts, I read that the issue might be that I wasn't using a Dual-Link DVI-D cable, so I bought one and installed such a cable. That has not resolved the problem. The monitor will not come out of sleep mode. When I have the monitor connected with a mini-display port to VGA adapter instead of a DVI-D cable, it will come out of sleep mode every time.
    Message was edited by: Annorax64

    I know it's a year later, but I'm not finding much through search.
    I have the same exact problem.  Difference being I'm using an iMac with 10.7.5.
    Same video board and monitor - ATI Radeon HD 6750M video card connected via DisplayPort to Samsing S24A850DW.
    I've tried two different mini-DisplayPort to DisplayPort cables and no change.
    I think I read that 10.8.3 might fix the issue.  Anyone that can confirm that, or has another solution?

Maybe you are looking for

  • Confirmation of service

    Hi everyone, When I am doing a goods issue for non stock materials (item category : TAX) it gives me a "confirmation of service". I understand there are no stock movements for non stock materials. But where exactly is this setting maintained that doe

  • 9IAS Installation Failed giving errors.

    I tried to install 9IAS Enterprise Edition(Release : 1.0.2.2.2a) from CD(three) but all the times getting error as: "Error while installing Report Server part tutil60.ins(33):File not found while copying file c:\Oracle\806\CAUPREFS.ORA" and after ign

  • White screen in liquify

    When I open liquify in CS5 a white screen appears, no image. I have been using this program and liquify for years and haven't had any problems.  I haven't updated or made any changes to my computer so I don't think it has anything to do with the vide

  • Google Hong Kong search results in safari IOS6

    After upgrading to IOS6, searching terms in the google search bar in safari takes me to the Hong Kong google search results. Is anyone experiencing this issue and have any solutions? Thanks in advance!

  • Error writing txt to file

    Hi! I am trying to collect a number of touchpoints from a controller thorugh a SCB-68 and a Daqpad-6020E. There are about ten thousand touchpoints usually in three columns and for the first 1500 everything is okay and then suddenly a bunch random num