Does a 4402 WLC support ISL?

Hey there,
Does a wireless lan controller support isl encapsulation?
I have an wlc with 8 active ap's, but their all using dot1q, but this gig fiber interface going to where i have the switch connected to the access point is isl and I can't get the ap to download the config.

Does a wireless lan controller support isl encapsulation?
No.
but this gig fiber interface going to where i have the switch connected to the access point is isl and I can't get the ap to download the config.
What switch is this?

Similar Messages

Does a 2504 WLC support mobility group with WiSM1 on 6500 Series

if a 2504 WLC support mobility group with WiSM1 on 6500 Series.
Model: WLC 2504
Software version: 7.3.101.0
Model: WiSM1
Software verion: 7.x.x.x

Yes and no.
Yes, mobility is supported.
No because I personally won't recommend inter-controller roaming. This is more true when you're dealing with 4400/WiSM-1. This is even more true when you've got WLC running two (or more) different codes.

Does the 2106 WLC support multiple interfaces?

I am trying to lab something up and I believe I am doing something incorrectly. My management VLAN works fine, the AP on port 7 finds the controller fine, but my VLAN 80 doesn't seem to be mapped to port 2. I mapped a test WLAN to the VLAN, and setup a DHCP scope, and a client can get on the WLAN, acquire an IP address, etc. I thought I coudl then map that VLAN (80) to port 2 and have it go out a cable modem. Doesn't seem to be working that way, however.
Anyone know if this is supported, or what am I doing wrong?
Thanks in advance!

You are getting FANCY Tim!
For starters you should really use a switch because sometimes you may get odd behavior connecting right to the WLC. Also the WLC is like a layer 2 switch and doesnt route. Ive done something similar in fact. We call it offnet. We break out the ports and have 1 going external. We used a switch inbetween the ap and comcast line.
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
‎"I'm in a serious relationship with my Wi-Fi. You could say we have a connection."

WCS WLC support

Hi,
We are running version 4.2.62 of Cisco WCS.
I'd like to upgrade to 4.2.128. We run version 4.2.209.0 on our WLCs.
The release notes for WCS version 4.2.128 does not list WLC version 4.2.209 as a supported version.
I would think it would be OK but can anyone confirm if this will actually work?
Also, is it worth upgrading the WCS to the more recent 7x versions?
thanks.

Hi,
The release notes mention with which version the WCS has been tested. So since 4.2.62 WCS came at the same time as 4.2.61 WLC it doesn't state it supports other 4.2 versions since it could not have been tested with those. However, since they are the same major release, all should be ok but you'll maybe face minor bugs here and there.
So just upgrade your WCS to the last 4.2 version of WCS and you'll be good to go :-)
Regards,
Nicolas
===
Don't forget to rate answers that you find useful

4402 WLC & 1000 AP's

I'm trying to setup my wireless in a test environment before putting in my production just to verify I know how to set it up. Here is what I have: 3560 switch/POE, 4402 WLC, & a 1000 AP.
I plugged my AP into f0/1 of my switch and added it to VLAN 3. I assigned it an Ip address of 10.0.3.1
I setup G0/1 to trunk to port 1 of the WLC. Native vlan 1 with no ip address assigned.
On my WLC I setup a management port untagged assigned it IP address 192.168.1.184 with a gateway of 192.168.1.184.
I setup ap-manager untagged with an IP address of 192.168.1.185, gateway 192.168.1.184
I setup one interface "ccla_conf_net2" assigned it IP address 10.0.3.22 Vlan 3 with a gateway of 10.0.3.1
Lag is disabled so I assigned all interface's to port 1.
I can ping 10.0.3.22 and 10.0.3.1 but when I go into monitor on the WLC it's showing 0 AP's as being up. Plus my wireless laptop is not picking up the SSID "ccla_conf_net2"
Do you have any clues as to what I'm doing wrong??

First suggestion is that you may have forgotton to configure your "ccla_conf_net2" as being capable of dynamic AP managment. Have you done that? Also, how did you get the IP address into the AP?

WCS with 4402 WLC?

Is the WCS software necessary to manage a single 4402 WLC or is it just additional bells and whistles?
Thanks - RV

Hi Ron,
You do NOT need the WCS to manage the WLC. We are running 3 WLC 4402-25's without the WCS. The WCS does add some nice funtionality but it is not a must.
Hope this helps!
Rob

Steps to update a 4402 WLC from 4.2 to latest 7.x

Greetings,
We need to upgrade a 4402 wlc from 4.2 where it is now, to the most recent 7.x release. I believe this is a 2 step process. Does anybody know the correct steps to upgrade to? Obviously we can't just jump straight to 7.x
Thanks in advance!
-Zach

http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn7_0_116_0.html#wp233853
If you read the release notes a little more carefully, you will also see the following:
4.2.130.0 or earlier 4.2 release
Upgrade to 4.2.176.0 before upgrading to 7.0.116.0.
4.2.173.0 or later 4.2 release
You can upgrade directly to 7.0.116.0.
Note If you upgrade from 4.2.176.0 to 7.0.116.0, the upgrade fails for the first time. The upgrade completes successfully when you upgrade again.
4.2.209.0 or later 4.2 release
You can upgrade directly to 7.0.116.0.
Just keep the above in mind depending upon your 4.2 release.

Frequent reauthentications with 4402 WLC

We're having an odd problem with web authentication on a 4402 WLC. Users have to reauthenticate several times before it seems to "stick." After logging in, they'll have to log in again after 2-5 minutes, and then possibly a few more times in the same kind of intervals (sometimes as few as 2-3 reauthentications, once as many as nine times).
Here's an odd wrinkle: we also have a 2106 controller, identically configured (as far as I can verify. They should have the same configuration, except for IP addresses of course). It's rock solid.
Both controllers are pointing to a Cisco ACS (the same one for both) for authentication, which in turn does an LDAP lookup.
Has anyone seen something like this? Digging into the WLC logs shows messages that the user failed authentication (note that the user never gives a bad username/password combo, so it looks as if something internal is forgetting the previous auth). Here's a sample line:
Apr 17 10:03:32.564 aaa.c:1184 AAA-5-AAA_AUTH_NETWORK_USER: Authentication failed for network user '<redacted>'
I also see a lot of messages like this, but again I have no idea if they're connected to my problem:
Apr 17 10:04:13.563 apf_foreignap.c:1278 APF-4-REGISTER_IPADD_ON_MSCB_FAILED: Could not Register IP Add on MSCB. MSCB still in init state. Address:<redacted>
Apr 17 10:03:14.090 apf_foreignap.c:1285 APF-1-CHANGE_ORPHAN_PKT_IP: Changing orphan packet IP address for station00:<redacted> from <redacted> ---><redacted>
Apr 17 10:03:14.090 apf_foreignap.c:1278 APF-4-REGISTER_IPADD_ON_MSCB_FAILED: Could not Register IP Add on MSCB. MSCB still in init state. Address:<redacted>
Any insights would be appreciated. Like I said, the fact that this setup is working fine on one WLC but not on the other is creating much head-scratching.
Thanks.

I'll bet your 2106 is not running 5.148 code. My first suggestion is to not use the 5.x code in a production environment. If that is not feasible then find out why the session is failing to move into the RUN state. Is there some other requirement for the client ? For example, did you enable the DHCP REQUIRED checkbox in the advanced wlan setting?

Does the 6600GT-VTD128 support video capture?

Hi,
I recently purchased an MSI 6600GT-VTD128 video card. The product information seems to suggest that the card has video input capabilities, and there is an adapter that plugs into the card that has a number of connections, one of which is labeled S-Video in. However, I haven't been able to get any video capture to work.
Does the card actually support this functionality? If not, what are the video input connections for? If so, is there some documentation as to how to set it up?
So far, I tried installing the video capture drivers that come with the card. I checked the manual. I checked the MSI web site FAQs. And I searched the forums.
Any help would be greatly appreciated.
Thanks,
Daniel

Thanks Richard. Yes I do have a breakout cable like that. Actually, I described it in my original message. So, I am guessing from your message that you believe that the card should have the capability to capture video.
In my original message, I asked if there was any documentation on setting up the card for video capture. The manual does not describe the procedure, nor does the MSI web site.
There are drivers on the CD that claim to be for video capture, but they had no effect when I installed them. In fact, there appears to be no way to tell whether the drivers were actually installed successfully.
If anyone out there has successfully used this card for video capture, please let me know.

HT4623 I have the original iPad, it does not seem to support ios6 and will no longer connect to iTunes WHY is this

I have the oringinal ipad, it does not seem to support ios6 and will not connect to itunes, WHY is this?

Start here... http://www.apple.com/support/iphone/assistant/itunes/

Does Photoshop CC not support touch on Windows 8.1 tablet?

Does Photoshop CC not support touch on Windows 8.1 tablet? Stylus nor finger working on canvas. Have all the updates from Windows and Adobe.

Photoshop does not have touch support. however some touch devices drivers have features the can be set to Photoshop Functions. For example
Tablets that have drivers that use Wintab API for pen support can be used with Photoshop Brush Pen support. Tablets that use Microsoft Ink API for pen support can not be used with Photoshop for Adobe does not have support for Microsoft INK API for Adobe states the INK API lack features used by Photoshop Brush engine.

Does Sender Mail Adapter support "PayloadZipBean" module

Hi everyone,
I have a scenario where, I get the email with an zip file as an attachment and I need to extract this file and send across. There is no mapping transformation done here, only I need to forward the attached file to the file server.
Zip file always contains 1 file and is a text file.
so Its an Email to File Scenario.
Can I send the zip file as it is without unzipping i.e., send the attachment as iit is to the file server?
If I want to unzip the file, does the module "PayloadZipBean" support in case of sender mail adapter. ?
Thanks,
Varun

Hi Varun,
Use "PayloadZipBean " Module at Receiver Communication Channel in the Module Tab Set the "Module Key.mode = unzip"
and Receiver communication Channel file should be "FileName.txt".
http://help.sap.com/saphelp_nw2004s/helpdata/en/bd/c91241c738f423e10000000a155106/frameset.htm
Regards,
Naga.

Get an Error window, The source folder does not contain any supported camera raw files

I am using CS2 and it would not open up my latest RAW files, I was getting a warning Could not complete your request because it is not the right kinds of document. So, I checked the Camera Raw Plug-in and it says Version 3.7. I see that my camera an Olympus E-20 is supported. But it is not opening the Raw files, the day before I took jpeg and they have opened. I will not trash my Adobe Photoshop CS2 because it was a royal pain to install and I don't know where the CD is.
I installed the latest DNG Converter and when I try to open up the folder which has all the RAW images that didn't open in Adobe, I still get an Error window that says, "The source folder does not contain any supported camera raw files." Why? It says it supports my Olympus E-20. I actually have the E-20n, I don't think that is the problem. My RAW icons usually show up as small image thumbnails and this time they are gray icons only with the incorrect date under the icon. Is there another product I can use without spending money? These images I took in RAW were special and I don't want to lose them. Please help!
Esther

Hello, I was using only CS2 with my Olympus E-20n for 5 years, no problem. It just started acting up in RAW this year. I downloaded Picasa that same day and now it seems to be opening up all of my RAW files that didn't open the other day. So, I think Picasa installed a new plug-in adaption to CS2 because now all my RAW icons have a new logo on them, the same one that's in Picasa. Strange, but it works now and I am not complaining anymore. I love CS2 and the many ways I can adjust RAW files, so I am using it, Picasa is a sideline now that I can take a look at many thumbnails and it organized all my photo files by the year and folders. Amazing free software. I have probably 60,000 images in my computer and an external hard drive and Picasa picked them all up and made a library, cool.

Does 10.5.6 Support Dual displays for Radeon 9800 Pro Mac Edition cards?

Does 10.5.6 Support Dual displays for Radeon 9800 Pro Mac Edition cards?
And is there driver updates for anyone using the all-in-ones HP printers...has anyone been able to use their scanners since the update? and has the dual screen support been added to avoid the blue screen on startup?

The ATI Radeon 9600 PC/Mac edition 256 MB should work in the MDD G4. It has two DVI ports (one is dual-link and can support a 30" display). You will need adapters for ADC displays.

Does K8D Master-FT support Dual core Opteron?

Hi,
Does K8D Master-FT support dual core Opteron? I saw the latest BIOS was released at 2003/12/11 and said to support for all series of AMD Opteron(up to 248, SC, 2.2GHz/1M).
Thx, Xuekun

Sorry I only looked after his question.
The entire K8D-Master3 series has support for it: >>Link<<

Does a 4402 WLC support ISL?

Similar Messages

Maybe you are looking for