Does a Change in the Local, Cached Image of iDisk Item Get Backed Up w/TM?

I use iDisk as a network drive for two Macs. If I make a change to a locally cached iDisk file, is that change captured by Time Machine?

No. The iDisk is not looked at by TM.
However, if the locally cached iDisk is disconnected and a "Previous local iDisk for AccountName.sparsebundle" is left on your Desktop it will get backed up by TM when it makes its next backup. Something to be aware of.
Message was edited by: BarryXSharp

Similar Messages

Folder redirection with Offline files enabled - Can I change the location of the locally cached files?

I have a 2012 r2 server setup with folder redirection and offline files enabled. All this works perfectly.
As you probably know, the local cache for offline files is stored at c:\windows\csc\v2.0.6\namespace\servername\
The problem I have run into is that one user (who cannot be told to delete files cough ceo cough) has a very large documents folder, and a small SSD drive for his C drive. So the offline files are filling up his SSD. He wants all his files to be synced,
so decreasing the max disk usage is also not an option.
What I would like to do is move the Offline files to his D drive which is a large drive, however I have been unable to find any official method for doing this. Is there any provision to change this?
If not, would it work to move the entire \servername\ path to the d drive and then create a junction at c:\windows\csc\v2.0.6\namespace\servername\ that points to d:\servername\?
Thanks,
Travis

Hi,
The following article is for Windows Vista but it should work at least in Windows 7.
How to change the location of the CSC folder by configuring the CacheLocation registry value in Windows Vista
http://support.microsoft.com/kb/937475
Meanwhile creating a symbolic link should also work like:
mklink /d "C:\Windows\CSC" "D:\CSC"
Note: It will create d:\csc folder so you do not need to manually create it.
Note 2: As mentioned above, you may need to re-sync the offline files. Personally I also think robocopy will not work.
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

SCCM issue - "LANG_LIST has some locales which does not match with the locale of serial number"

I have a problem with the error "LANG_LIST has some locales which does not match with the locale of serial number" recurring.
I am trying to install Acrobat XI Std silently by SCCM.
I've used the Adobe Customisation Wizard to create a mst which include the volume serial number we have with our licence purchases. Note that I am in Australia. I use the command line in SCCM for the install as "msiexec /i "AcroStan.msi" TRANSFORMS="D&B_AcroStd.mst" /qn" which fails silently. If I install on a local machine using an admin command prompt and changing to /qb at the end, I get the aforementioned error.
I have a few things to try and resolve, having searched the adobe forums and other forums for the solution. The mst is only trying to install US English & I have even gone so far as to use the direct editor in the customisation wizard and change some values in the property table to resolve this. In the property table I can confirm that LANG_SEL_DEFAULT = ENU, REGIONAL_LIST = ENU, LANG_LIST = en_US, ProductLanguage = 1033
Is there a way to check the language specified for ym serial number?
Bryndon

Update on a couple of details:
@Sabian,
Thanks for the location, I've downloaded and then when I tried an install of the newly extracted msi (admittedly on the same computer) I got exactly the same issue. Of note though is that running /qf automatically brought up the same serial number and the same incorrectly spelled company name. Installing on another computer (freshly imaged) doesn't have those inputs already present under /qf. Next when I try using the transfrom (a new one) with /qr it gives an error of the serial number, displaying the entire serial.
@Sebastian
I've had a look through yours and it seems our issues could have the same origin. Looks like I may have to call customer support regarding the serial number as Sabian suggested in your thread.
The bit that gets me is when the same serial number is used in a manual install (or /qf) then it installs ok without any errors.

Setup.exe gives a "LANG_LIST has some locales which does not match with the locale of serial number"

I ran the Adobe Customization Wizard XI to create a transform file and now when run setup.exe it always come with the error "LANG_LIST has some locales which does not match with the locale of serial number".
It does the same thing when using msi with the command : msiexec /i AcroPro.msi TRANSFORMS=AcroPro.mst /qb!
Here is my setup.ini file
[Startup]
RequireOS=Windows XP
RequireMSI=3.1
RequireIE=7.0.0000.0
Require64BitVC10RT=1
CmdLine=/spb /rs /sl"1036"
[Product]
msi=AcroPro.msi
vcrtMsi=vc_red.msi
vcrtDir=VC10RT_x64
Languages=1033;1036
2052=Chinese Simplified
1028=Chinese Traditional
1029=Czech
1030=Danish
1043=Dutch (Netherlands)
1033=English (United States)
1035=Finnish
1036=French (France)
1031=German (Germany)
1038=Hungarian
1040=Italian (Italy)
1041=Japanese
1042=Korean
1044=Norwegian (Bokmal)
1045=Polish
1046=Portuguese (Brazil)
1049=Russian
1051=Slovak
1060=Slovenian
1034=Spanish (Traditional Sort)
1053=Swedish
1055=Turkish
1058=Ukrainian
1025=English with Arabic support
1037=English with Hebrew support
6156=French (Morocco)
CmdLine=TRANSFORMS="AcroPro.mst"
[Windows XP]
PlatformID=2
MajorVersion=5
MinorVersion=1
ServicePackMajor=3
[MSI Updater]
Path=WindowsInstaller-KB893803-v2-x86.exe
I don't know what goes wrong as took my serial number on my profile from the adobe web site, same thing for the download of the software.
Does it means that the serial number provided was invalid for deploying ?
NB.: My goal is to deploy our Acrobat XI through SCCM in silent mode and I don't know if there is extra consideration for that. For now it's only not working at the command line.
Another important point is that the install works great without customization ! If I just run the setup.exe from freshly extracted files and I use my serial number, everything is working fine.
So what goes wrong ?

Thanks for the reply brogers_1 and Vinod Dbhal, you gave good hint.
I retried installing the initial package in French on a Windows 7 English and the software installed properly in French.
As I used to work with virtuals for those tests, I rolled back my virtual and redo my test installation with chosing to install it in English on my Windows 7 English and again the installation finished properly but I was surprised when I realized that even if I chose English as language, the software was running in French !
Of course I can change the language settings (in the edit-preferences-language) to follow the operating system witch is nice.
That gave me the cue I needed to know. I started from scratch my customization with choosing only the French language in the "Application Languages" and I left the MUI Languages blank and saved the .mst
I ran again the same command : msiexec /i AcroPro.msi TRANSFORMS=AcroPro.mst /qb!
And everything works fine.
NB.: As I used the .msi directly, of course I had to install the prerequirement Visual C++ 2010 first. Otherwise the installation failed without any error message.
Thanks again to you for your good hint,
Bob

How long is the locally cached token valid?

Dear Forum,
we are currently planning to show Microsoft RMS to potential Clients with a live demo and so on. In our preparations we noticed that users are able to be authenticated eventhough there is no connection to the cloud Service. We also figured out that some
kind of cache (more specific: parts of the certificates) is stored in C:\Users\<username>\AppData\Local\Microsoft\MSIPC, but it's quite intransparent how the cache is used and for how long the locally cached token is valid for a specific RMS protected
file. In order to be prepared for such questions after the demo, I kindly ask you for help on this matter.
Thanks and Regards
Fabio

Hi Fabio,
When a user first authenticates against the certification URL of an RMS server, the user is than issued a RAC (rights account certificate) or GIC certificate (those that you see in MSIPC folder). RAC/GIC is issued after user authenticates to the domain and
is used with further communication between user->RMS server to confirm users' identity. For ADRMS (RMS on premises) the default RAC lifetime is 365 days (it can be manually changed). I would assume that the same amount time is set for Azure RMS.
You can have a better view on certificates with this great post of Dan Plastina
http://blogs.technet.com/b/rms/archive/2012/04/16/licenses-and-certificates-and-how-ad-rms-protects-and-consumes-documents.aspx
Did my post help you or make you laugh? Don't forget to click the Helpful vote :) If I answered your question please mark my post as an Answer.

Error ACLContainer: 65315 does NOT EXIST in the Object Cache for parentID:

Expert,
I did the following steps to upgrade the OWB repository from 10g to 11g
• Created a dummy workspace in the 11.2 repository
• Created users in the destination environment
• Run Repository Assistant against the 11.1 source database
• Then selected *“Export entire repository to a file”* and selected the MDL(10g) to import
After 99% of completing I have got the below error
Error ACLContainer: 65315 does NOT EXIST in the Object Cache for parentID: 65314
Please let me know the solution.
Thanks,
Balaa...

Hi I had the same error and worked on it for almost a week with no success but there is few work around for this try it it might work for you.
Step 1>Run a health check on OWB 10.2 enviroment(make sure you clone your OWB 10.2 enviroment and then do this healthcheck ,these checks are tricky )
refer
Note 559542.1 Health Check of the Oracle Warehouse Builder 10.2 Metadata Repository
This will give you info about your missing ACL
Step 2> download these two scripts fixLostACLContainer.sql ,fixAllACLContainers.sql
please refer :
Note 559542.1 Health Check of the Oracle Warehouse Builder 10.2 Metadata Repository
OWB 10.2 - Internal ERROR: Can not find the ACL container for object (Doc ID 460411.1)
Note 754763.1 Repository Cleanup Script for OWB 10.2 and OWB 11.1
Note 460411.1 Opening Map Returns Cannot find ACL Containter for Object
Note 1165068.1 Internal Error: Can Not Find The ACL Containter For for object:CMPPhysical Object
It might resolve this ACL issue but it did not work for me.
If none of these work then
Perform export from design center of OWB 10.2 and import through design center of OWB 11.2.(ONLY OPTION)
It worked for me.
Varun

Need help understanding the local caching of jnlp when creating it via jsp

I'm trying to deploy an app via Web Start. I have occasions when I need to pass arguments, so I'm using JSP to create the JNLP and optionally write arguments.
I need some help in figuring out how to cover my different use cases with as few different jnlps as possible and am confused about the local cacheing logic.
Use 1
Initial install: I pass an init=yes url param which writes a preferences file <argument> to be passed to my app. I don't want this argument cached in my jnlp, as this will overwrite the user's preferences on subsequent launches.
Use 2
Subsequent offline launches: no url params passed.
Use 3
Launch via html link (in a CMS): passes a file=<filename> url param which creates a file <argument> for my app to open. Again, I don't want this argument cached, otherwise launching from, say, the desktop shortcut will reopen this file.
Can anyone explain how best to cover these three use cases?
TIA!

Did you solve this cache problem? I have a similar issue where I don't want it to use the arguments over again...

Where does blackberry torch stores the current wallpaper image?

Where does blackberry torch stores the current wallpaper image?

In Media > Pictures > Specific Folder Name as per Theme name.
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

Does Dreamweaver CC support the CSS3 border-image tags?

Does Dreamweaver CC support the CSS3 Border-image tag? I can't find it anywhere. I've searched the help for that string with no luck.

Better check to see if it's supported well enough by major browsers. Last time I checked, it wasn't good in any ver of IE.
http://caniuse.com/#feat=border-image
Nancy O.

Ken burns cropping in iMovie 9.09 changed with mavericks update. Cant zoom in to a small area....it limits the size now. How do i get back to the old way?

Ken burns cropping in iMovie 9.09 changed with mavericks update. Cant zoom in to a small area....it limits the size now. How do i get back to the old way

These timezone definition changes are fairly common, when viewed world-wide.
For notifying Apple, contact the folks at the Apple Support Center or (if you have access) log a bug report. (The folks at Apple might or might not notice any postings made here.)
For the immediate case, updating the timezones yourself is straightforward; the sequence is basically the same on Linux, OS X, Unix and even OpenVMS. Ugly, but it works. (The US folks got to see this mess first-hand a few years ago, but there are other locations that see these sorts of timezone definition changes far more often.)
For those following along that aren't familiar with this sequence, this old posting should get you close when rebuilding your definitions, though the timezone database has moved to IANA.

I cannot update my software because I have too much 'other' GB space. Does anyone know what the 'other' is and how do I get rid of it?

I cannot update my software because I have too much 'other' GB space. Does anyone know what the 'other' is and how do I get rid of it?

COPirateDad wrote:
I have been trying to figure out what ... is occupying over 1.4 GB of memory on my iPhone
Other is usually around 1 GB...
See Here > maclife.com/how_remove_other_data_your_iphone
More Info about ‘Other’ in this Discussion
https://discussions.apple.com/message/19958116

HT5622 In a search I changed the Brazilan store to the Canadian store and now I cannot get back, and Bcause of that I cannot buy anythin at the apple Store. Can someone help me please?

In a search I changed the Brazilan store to the Canadian store and now I cannot get back, and Bcause of that I cannot buy anythin at the apple Store. Can someone help me please?

Click here and follow the instructions to change the iTunes Store country.
(86100)

Everything on my screen, Mac Pro, shrunk! Gmail, bookmark pane, task bar menu, even the password sign in. I'm sure I did something with the fingers thing. How do I get back to defaule

Everything on my screen, Mac Pro, shrunk! Gmail, bookmark pane, task bar menu, even the password sign in. I'm sure I did something with the fingers thing. How do I get back to default. The font is tiny, tiny. My operationg system is Mavericks.

Thank you for the list, I will print and keep it handy.
Contol F3 makes my whole screen larager or smaller.
Command option 8 does nothing that I can see.
Command option + or - will zoom in or out on the page I am on but if I change windows it reverts.
But bookmarks pane, the task bar, the password sign in and even the post I am writing (actually every printed word), are a font so small I almsost need a magnifiying glass. This includes web pages too!
I am using Mavericks.
Trying to retrace my steps when this happened. Nothing unusual, I was using airplay to watch a You Tube segment on the tv. I don't think that is related.
I really appreciate your help and comments on this. I can usualy google and find and answer, but to no avail with this one!

Hi. I clicked some snaps from my iphone and post that without copying it i restored the iphone with all apps etc available from the backup taken. How do i get back the photos which were clicked earlier. Is there a way to get it back?? Please help

Hi. I clicked some snaps from my iphone and post that without copying it i restored the iphone with all apps etc available from the backup taken. How do i get back the photos which were clicked earlier. Is there a way to get it back?? Please help

Yes i had not taken back up before restoring it. However i was just going through some links on the net and there is a software available for MAC to retrieve such lost data. But the point is will the said software work on iphone as the OS is not MAC..
Will have to give a try to this. If successful will share it with all. Anyone else has any idea about this please so share.

Downloaded pictures from e-mail. It covers the whole screen. How do I get back to e-mails?

I downloaded pictures on my new I-Pad 2 from email. It covers the whole page. How do I get back to my e-mails?

Double click the Home buttom (bottom button) and it will bring up recent app activity. Then, just click the Mail icon.

Does a Change in the Local, Cached Image of iDisk Item Get Backed Up w/TM?

Similar Messages

Maybe you are looking for