Does a Mac Mini connect to a G5

I have been working with the iPad, and I have a G5 Mac ..does a Mac mini connect to a G5

Which iPad/iOS on the iPad?
What OSX version on the G5?
An iPad 1 (only goes to iOS 5.1.1) will sync to a fully updated G5. That means OSX 10.5.8.
A later model, fully updated iPad will not sync since they require iTunes 11.1 and that requires OSX 10.6.8 or later which requires a Mac with an Intel processor.

Similar Messages

How to mirror iMac screen wirelessly through a mac mini connected to an hdmi port of HD TV?

I have a new Mac Mini connected to a Sony HD TV. On the same network but in a different room I have my iMac. I can control the iMac with wireless mouse and keyboard from the same room where the TV and Mac Mini reside. I would like to work on my iMac but use the HD TV as my monitor so I can show slideshows and iMovie projects without transferring files to the MacMini first. Is it possible, and if so, how do I go about setting it up?

Your iMac likely supports a higher resolution than the TV does. The maximum standard TVs today use is 1920x1080, and if your iMac is an Intel Core i3 or i5, its own display is at least that high of a resolution. Which model of iMac do you have?
If your iMac is running at least Leopard (10.5), then both machines have Screen Sharing built in. It can be accessed from the Finder, but as often as you would like to use it you should go to Macintosh HD > System > Library > CoreServices and drag it (the icon) to your Dock. That will create the shortcut to get to it easily. As I noted before, the built in Screen Sharing VNC software doesn't do full screen, but third party VNC software can. Both machines do not need to be using the thrid party VNC software, just the one viewing - in this case your Mac mini. Chicken of the VNC is a popular free one, fairly easy to use:
http://sourceforge.net/projects/cotvnc/
For more info about how to set up Screen Sharing and how to use the included application:
http://mac.appstorm.net/how-to/os-x/using-screen-sharing-in-os-x-leopard/
Note that you will have to use the settings in System Preferences, regardless of what VNC software you use. Both systems will need to have Screen Sharing settings enabled.

HT201897 Does a Mac Mini purchased in the USA require a power converter for operation in Europe or should I only purchase a different power cord for it?

Does a Mac Mini purchased in the USA require a power converter to operate outside of the USA or can I simply purchase a different power cord for it?

Depending on which European country (should their mains access plug/port shape vary) the
cord set with correct ends on it has to match. You can buy a cord that plugs into the Mini
where the factory cord goes, and the other end has one for the wall source shape. The wire
for the application should be able to support 110~240VAC.
With the cord or an accurate image in hand, you could either get a new cable to match both
realities (mini + wall supply mains local) or an adapter (US/Standard to EU/Local) for just
the head or input part of the original Apple cable. One plugs into the other, then into wall.
If you have a new Mini with a small modular plug/port on the computer end of the power wire,
it would have only two holes and no ground; the other end would have two prongs of equal
shape and size. Not a polarized plug and not a grounded three-prong. To get a replacement
power wire for the MINI to go from power source to the Mini is recommended, if you are going
to be staying in one location for awhile. A Travel Kit that offers no electrical conversion but only
the physical shape adapter kit, should a available in travel stores, airports; big box discount
stores, computer and electronic stores. This page shows the cord end of the appliance shapes.
The other end would be the mains shape for whichever country you are going to....
http://www.signalandpower.com/European-Power-Cords/
So to match the country or regional power mains type is a primary concern for obtaining the
correct replacement cord to supply the Mini with local mains power. The end which plugs into
the Mini is of a certain type (numbers for EU and elsewhere are published, see link + images)
& the end that gets plugged into the mains or utility side, needs to match the local specification.
The link to Apple, to contact for Support and Service information in prior post, should be able
to help find a source for the local replacement type cord they'd sell local people with a Mini.
Apple local sources offer replacements for this purpose; and for travelers, a second cord for
a direct use (not adapter plugs) is a better bet. For those who only need a cord in two places.
If you are traveling to Denmark, UK, Swiss or other EU countries require different adapters.
Even places where the power itself may be somewhat similar. However your MINI has an
automatic power supply that will conform to that energy standard, you only need to supply a
correct non-transforming adapter. Simply a connection to adapt one shape to another.
The general purpose travel kit that is not specialized to Apple power adapters, would have a
plastic plug/adapter with the local pins on one side, and the US/standard two slots on the other.
So, no circuitry nor any other change of electrical power inside this device would be required.
http://www.signalandpower.com/2-Prong-Plug-Adapters/
http://www.signalandpower.com/Convert-to-Europe-CEE-716-plug/
http://www.signalandpower.com/Swiss-AC-Power-Cords/
In other words, I believe my other post already covered this. On the ground on either end of the
path, adapters are common and the Mini does not use proprietary electrical components IF you
have one of the more recent shape aluminum models with the power supply built in. The older
Mini has the power brick and two wires. A US/Standard plug adapter to EU/Local would work in
either case, since all you'd do is plug the adapter plug into the local mains and the US plug into
that one... I see these kinds of discards for as little as 25¢ in thrift stores in Alaska. Or you can
buy a new one. Or you could get a complete cord with correct ends on it, for Mini + local mains.
Hopefully this helps somewhat. The only info missing is which EU country or region is involved.
Their shapes of plug are different, so the adapter end for local supply has to match their standard.
Swiss, Denmark, UK, and others offer different shapes and so on.
The Apple store in the location you are traveling should be able to supply you with a replacement
cable for a modern MINI, that has the correct local mains end, and the correct Apple mini end on
the opposite. Since the unit is automatically switching, the magic is done.
Since I supplied a means to locate any number of Apple stores, authorized service providers &
other Apple related vendors in my earlier reply: https://locate.apple.com/country you could contact
any of them along your route in the City in whichever EU country, to find a local MINI power cable.
In any event, I'm done...
Good luck and happy trails...

Does the Mac mini mid-2010 have an active PFC power supply?

I'm about to buy a UPS unit to run my NAS, and I'd like to connect my Mac mini to it as well. Does the Mac mini mid-2010 model have an active PFC (power factor correction) PSU (power supply unit)?
I've read that if it does (as the Dell XPS series do), then one of the cheaper UPS units won't work because those typically have modified/simulated sine wave outputs (you'll only notice when the power is out and the UPS is feeding power from its battery). It would mean I'd have to buy one of the more expensive UPS units like APC Smart-UPS SC620 or CyberPower CP1000PFCLCD.
I can't seem to find any resources that explain this. Please?

FWIW, I use one of these:
http://www.cyberpowersystems.com/products/ups-systems/soho-ups/cp425slg.html?sel ectedTabId=overview&imageI=#tab-box
for my HTPC setup. I have a 2010 Mini with a couple of USB drives plugged
into it, my 42" Samsung LCD TV, cable modem, cable box, and an Airport Extreme
Base Station running off of the backup power ports (not my 5.1 receiver for obvious
power reasons). With all on, I get enough time to gracefully power down the Mini with
time to spare when power goes out. When not watching TV or listening to music,
the cable modem and AEBS can run a long time during a power outage.
I have had this setup for around 2 years and have had no ill effects on any of
the gear and I do periodically have everthing powered then yank the AC
cord to cycle the battery.

How can I control a mac mini connected to a benchmark dac 2 for the purpose of listening to 24/192 audio files?

How can I control a mac mini connected by USB to a Benchmark DAC 2 for the purpose of listening to 24/192 music downloads?

Hello,
About the dac 1, but may apply to the dac 2 as well in some ways...
Here are more details:
1) The current version of iTunes (7.5) for OSX is very broken. Some older versions work properly, but 7.5 introduces truncation and DSP artifacts that can measure as high as –80dBFS. These levels are easily audible. There is no system configuration that will permit transparent playback from 44.1kHz sources with iTunes 7.5. Curiously, the only format that works properly in 7.5 is 24-bit/96kHz. This iTunes problem has nothing to do with USB communications, as the results are the same when using the built-in optical port on our PowerBooks. As a workaround, we suggest using the free VLC for Mac player. VLC works perfectly with all formats (provided OSX is set to match the sample rate of the files being played). We highly recommend the VLC player for OSX users, and strongly advise against using iTunes. We will attempt to identify which versions of iTunes work and which ones don't. But beware, iTunes updates itself without user intervention. One of our test computers "upgraded" itself to the dysfunctional iTunes 7.5.
2) OSX still does not have the ability to follow sample-rate changes. We consider this a nuisance for most users and a show-stopper for users who want to play a mixed list of 44.1kHz and 96kHz material. An OSX sample-rate mismatch will invoke the very-poor-quality sample-rate conversion that is built into OSX. The iTunes 7.5 bug seems to be locking on this sample-rate conversion at all sample rates other than 96kHz. Until this is fixed, OSX is not the operating system of choice for audio playback.
http://www.stereophile.com/content/benchmark-dac1-usb-da-processor-headphone-amp lifier-manufacturer-comment

Why does my mac mini not recognize camera when plugged in?

why does my mac mini not recognize my capera when it is plugged in?

What model of Mac Mini and what camera do you have?
Are you connecting it via USB or other ways?

Does the Mac Mini Server include iLife?

Hi,
I couldn't find a question to this anywhere...
I'm considering buying a Mac Mini Server soon.
Question - Does the Mac Mini Server include iLife?

When Apple first came out with the Mini with Snow Leopard server, even their sales support people said it came with iLife. (They no longer make that mistake.)
By using the statements of sales support and by referring to the claims on the iLife page (which you quote) -- with some insistence on my part -- I was able to get AppleCare to send me iLife for free. Worth a try. Though frankly, my time would have been better spent just buying the iLife.

Does the Mac Mini have a camera?

Thinking about getting a Mac Mini because it is very affordable, and I hate my PC, does the Mac Mini have a camera for facetime?

I think cameras are in the displays. The Mini is the "scrunched" version of the tower.

Why does my mac mini getting hot

why does my mac mini get hot and run fan speeds up high. I've added ram and do not understand the temperature flucuations.

How hot is hot? What programs are you running when it gets hot?

Why does my mac mini not read or write DVD's?

Why does my mac mini not read or write DVD's? I have tried different5 brands of media, checked firmware and followed every 'fix it' available. HELP.
It is a late 2009

See my FAQ*:
http://www.macmaps.com/cdrfailure.html

Does 2012 mac mini get very hot when using logic pro

does 2012 mac mini get very hot when using logic pro

Are you saying that your machine does or is it an enquiry before buying ? I use a 2011 server model - well, it does get hot over a period of time, but I've very rarely heard the fan kick in, its a surprise when it does. As far as I know the casing has been specifically designed to conduct heat, rather than having any fancy grilles and so on, being so small in size. I haven't found it to be cause for concern, if that's any help.
Slidersson is in need of more cold showers.

Does a mac mini 2007 with osx 10.6.8 supports 10.7?

I have a friend who has a Mac Mini 2007 with osx 10.6.8, and he wants to upgrade 10.7 for different reasons, does the mac mini supports it?
Processor: Core 2 duo 2GHz
RAM: 2 DDR2
Thanks

Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

Why does my Mac Mini look different on different displays

I have 3 HDTVs, 2 Samsung 40" LCD 1080p and a 50" Insignia Plasma 1080p. I have my 2009 Mac mini connected to my Samsung LN40a530 the picture quality is amazing, pictures are beautiful, text is extremely clear and colors look real and vivid. But as soon as I try connecting my Mac mini to my other television sets, the overall picture quality is very noticeably poor in comparison to the Samsung LN40a530. At first I had just the Samsung LN40a530 and the Insignia plamsa. I had figured the issue was the fact that one is LCD and one is plasma but I recently purchaced a Samsung LN40c550 LCD 1080p LCD and the same problem persisted. The colors are off for instance people look dark and orange, the text is blochy, the overall picture is just not very good. I have tried several times to adjust the settings on the Mac and the televisions with no luck. I find this very strange since both Samsung televisions are essentially the same tv. It's understandable with one being plasma and one being LCD but when the LCD and the plasma are having essentially the same issue it's very confusing. If anyone has had the same issue when switching monitors or televisions with a Mac mini any help would he great. Thanks
Message was edited by: HarlemDiplomat25

There is really only one setting on the Mac that can have such a dramatic affect. That would be the gamma setting. You get to the gamma setting when running through a color calibration on the Mac. You can check and see if gamma is the same when connected with the different TVs. Mac's typically default to 2.2 for computer displays but a setting of 1.8 is often needed for TVs, so that's worth looking into.
Outside of that setting, your attention should shift to the TVs. On you two Samsungs, do they have very similar menu arrangements? If so, try sitting down with a pencil and paper and write down all the settings for the good Samsung and then apply them to the bad one. I would think that would bring them very close into alignment for image quality.
Are all the TVs in question being hooked up the same way using the same cable and adapter? You didn't really say anything about how they are hooked up.

Why does my Mac Mini running on Mavericks so slow to start and load apps?

Why does my Mac Mini running on Mavericks take so long to start and load apps?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/d;/(etc|Preferences)\//s/^\.\/[^/]+//p;' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / /{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,[lps]*.conf,pam.d,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}* .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Why does my Mac Mini go into a safe boot mode after put to sleep?

Why does my Mac Mini go into a safe boot mode after I put it to sleep?

HI, can you tell us how you know it's Safe Mode?
Not sure if this applies to the new Macs, but if not I doubt it'll hurt anything...
After using Safe Boot, to return to a normal startup, execute this command in Terminal or the command line:
sudo nvram boot-args=""
http://support.apple.com/kb/HT1455

Does a Mac Mini connect to a G5

Similar Messages

Maybe you are looking for