Does a nested sequence keep its render?

I have a nested sequence within my Main Sequence.
Within the nested sequence is Adobe Dynamic Linked clips to After Effects.
I cannot edit these while un-rendered.
If I take the hours to render the data within the nested sequence, and then when moving that sequence in the main sequence, will Premiere have to re-render the initial data?
Or, does it have a memory of the data that is rendered within the nested sequence so it won't be as graphic intensive?

Run a short test and see for yourself.

Similar Messages

  • How long does Cisco VPN client keeps its logs

    Hi,
    How long does the Cisco VPN client keeps its logs? It seems like 2 weeks. Is it right?

    February 18, 2010
    Due to popular demand, the Cisco VPN Client v5.0.7 open beta is now available!
    In addition to serving as a general maintenance release, the Cisco VPN Client 5.0.7 beta is compatible with Windows 7 & Windows Vista 64-bit environments. 
    A 64-bit specific compatible image is available for installation on these platforms.
    Please have communicate feedback (both positive and problems) to [email protected]
    Key Capabilities available for Beta Testing:
    New Platform support – Windows 7 & Windows Vista 64-bit platform compatibility
    Software Access: http://tools.cisco.com/support/downloads/go/Redirect.x?mdfid=281940730 (under 5.BETA)
    Software is available for download by any customer with a Cisco.com SMARTnet™ enabled login.
    Release Notes will be available next week via a link once the download image is selected.
    There are currently no plans to support Windows XP 64 bit in the VPN client.

  • Nested Sequence and Maximum Render Quality

    I use quite often nested sequences and sometimes within nested sequences. Do I have to check the flag Maximimum Render Quality in each sequence setting or is it enough to have it marked in the root/top sequence? I guess, I have to. Is this correct?
    regards,
    Claus

    For exports the checkbox in the export settings dialog overrides all others. For preview rendering make sure to check it on the top sequence in which you are rendering previews.

  • Why does my nested sequence need rendering?

    Folks, I have a twelve sequences that are fully rendered and I am nesting them onto one timeline. The new timeline has the same settings as the other sequences. Why do my already rendered timelines require rerendering on the nested sequence? Is there any way around this. It would seem there's some way to take already rendered sequences and line them up on one sequence without having to rerender.
    The project is XDCAM EX 1080p24

    Nevermind folks, I figured it out. I had my render control settings set to Apple Pro Res on some timelines.

  • Why does my nested sequence have only one channel of audio?

    Hi,
    Working in Prem Pro CC on my Mac Pro.
    I have  a number of interviews, each shot with 3 cameras and with audio from a separate audio recorder. The audio has two channels, Ch1 has the boom mic and Ch2 a radio mic.
    I created a sequence, placed the audio into channels 1 & 2 (they are linked) before placing the video tracks onto timeline tracks 1-3. Everything's synced nicely and so I nested the shots and then I enabled multicam on the nested sequence.
    However, now when I edit the nested sequence into my edit sequence, it has only one channel of audio. I tried Modify>Audio Channels but within that page, in the option to select 'Source Channels' the options are "None" and "Channel 1".
    How do I get my nested sequence to place both audio channels into my edit sequence?
    Any help much appreciated.

    Nevermind folks, I figured it out. I had my render control settings set to Apple Pro Res on some timelines.

  • TS3988 where does iCloud Control Panel keep its error logs

    I have a problem with my iCloud control Panel.
    There is a small yellow triangle with an exclamation mark, indicating there is some sort of error, but there is absolutely no way of finding out what the error is. I have looked everywhere on my system for anything resembling  an error log for iCloud Control Panel yet i havent found a thing.
    Does anyone here know where it might be located and how i can find out what the error is to fix it

    Hi, Korgun. Your short version is a little too short and your long version much too complicated for me to be certain I understand your situation correctly, but I'll take a shot.
    Every volume (a hard drive, or a partition on a hard drive, or a CD, DVD, etc.) that has OS 9 installed on it contains an invisible Desktop Folder, and in that folder are all the items that appear on the desktop when you boot into OS 9, except your hard drive and the Trash.
    The fact that you can't boot to either OS on your old drive suggests that its directory may be damaged, in which case it wouldn't be surprising if, in addition to being unable to boot to it, you also couldn't find some things on it. If that drive mounts normally on the desktop when you boot into OS X on the other drive, use the Repair Disk function in Disk Utility (open the copy of DU on the good drive after making sure nothing is running on the bad one) to try to fix the directory on the bad drive. Run the Repair Disk routine repeatedly until you've gotten two successive "Appears OK" verdicts. Assuming DU is successful, you should then be able to double-click the Desktop folder on the repaired drive and access all the files that are on that drive's OS 9 desktop.
    If I've misunderstood your situation, my apologies, and would you please try to clarify matters?

  • What happens to previews in nested sequences?

    For the sake of keeping this simple, If I were to have a
    main/master sequence comprised of
    2 nested sequences
    When I render (preview) out one of my nested sequences (not just effects, but the entire work area), why don't I see my timline turn green on my main/master sequence?  It seems to stay yellow or red.
    I have all the sequences set to render the same (Cineform High-HD).
    I want to save time on final renders by using the preview files, but are they even available if I haven't previewed on my main/master sequence?  If I did preview rendering on any sequence deeper inside the master, do those even get used or does Premiere ignore them?
    I rarely would preview out an entire master sequence.  Most likely, as the projects are never as simple as my above scenario, I have some nests that go 10 deep.  Sometimes the best place to do the render preview is 5 nested sequences deep. 
    What happens to the preview files on nested comps?  When you turn on "use render previews" when exporting, does Premiere dig deep through all the nested sequences to utilize that info?

    Bummer.  So they are essentially useless unless you can build a complicated 30-minute TV show on only one single sequence (which would be a total mess).

  • Is there a limitation of nested sequences?

    In Final Cut it was always a problem to nest sequence because of render problems with ghostpictures and audio issue.
    Is this better to handle in Premiere Pro escpacially when I'm nesting an always nestet seequence into another or can I go as deep as I want?

    There is no documented limit of Nested Sequences.
    "You can nest sequences within sequences—to any depth—to create
    complex groupings and hierarchies."
    Nest sequences

  • Image in nested sequence does not let me export my project

    Hello,
    Here's my issue:
    In my Premiere project, I have a "Master" sequence in which I have normal a/v files and two nested sequences, for the video intro and ending.
    The problem is with the nested intro sequence, which is composed of several images that I've animated, plus sound. I've narrowed the source of the problem to one specific image in this sequence, which is 5760x3240. I've read in other threads that images larger than 1920x1080 can be a problem, but couldn't find further info.
    What happens when I try to render my video in 1080p with this image in a nested sequence is the encoding fails with AME giving me this log message -
    " - Encoding Time: 00:00:01
    09/22/2014 10:45:46 PM : Encoding Failed
    Export Error
    Error compiling movie.
    Unknown error."
    When I try to render in 720p with the image in the nested sequence it works fine. When I take the image out of the nested sequence and just put it on the "Master" sequence it also renders just fine, even in 1080p.
    So my question is - why can't I render my project if I have this image in a nested sequence, and if possible, how can I fix it?
    Thanks in advance.

    Hello again,
    While trying to do what you told me I've come across something interesting. Apparently it's not only that one image that's responsible for the problem. Here's how I have it setup:
    Premiere for some reason seems to have trouble rendering the still image "BG2.png" (1920x1080) AND the problematic 5760x3240 nested image at the same time. As "BG2.png" does not actually appear until later, I tried cutting it just before the point where it should appear. With that, AME was able to render the video until the point where "BG2.png" started, then it failed again. So I checked in the nested sequence and also cut the 5760x3240 image (because it appears briefly in the start of the sequence then has its oppacity set to 0, it wasn't a problem). So what I had was the 5760x3240 image cut after it appeared (instead of just turning down the oppacity) and BG2 cut before it appeared, that way those images didn't overlap in the master sequence. With that, AME was able to render it just fine. So I have no idea why, but those 2 specific images won't let my sequence render when they ocuppy the same time. Any ideas?

  • RENAME:  When I rename a photo why can I not find it doing a search?  The photo obviously keeps its old name even though it has a new one   IPhoto 09

    When I rename a photo why can I not find it doing a search?  The photo obviously keeps its old name even though it has a new one>  IPhoto 09

    Thanks, that makes sense.  If I do a search in IPhoto I find it.  I have 6 grand children and also have had my camera for quite awhile and it starts file names over again after 10,000 pictures. (I don't have all these on the computer) but now I have some files with the same name  ie  img_4   and img_4
    Thanks again for your help!!
    HC

  • TS1382 why does my ipod classic keep saying its charging and the back of it get hot

    why does my ipod classic keep saying its charging and the back of it gets hot

    The battery and/or charging circuit may be faulty. Reset the device and try again having let it cool down first.
    tt2

  • Transmission does not keep its configuration after restart

    Hi everyone,
    I have a problem coming up with gnome's last upgrade.
    Since Gnome 3.8 then, transmission 2.77 will not keep its configuration. I've already tried to erase the ~/.config/transmission folder in order to start transmission with a "clean" configuration but its not working.
    Does anyone have the same problem ? And more importantly, does anyone have a solution yet ?
    Thanks

    chord wrote:
    Common solution for configs rewriting prevent :
    chattr +i <your-config-file-name>
    It blocks any changes on locked file.
    If you need to rewrite/edit file, just unlock it with chattr -i, write changes and lock it again.
    I don't think that's a good idea, there is probably a valid reason a config file is being overwritten, your solution would disable the actual application from changing its own config file...
    I had a similar problem with the transmission daemon,
    Basically this is what I have deducted:
    Start transmission
    It reads config file
    Stop transmission
    It re-writes the config file with what it first read when it started plus applying changes you may have made via a GUI.
    Basically as I said earlier, if you edit transmissions config file while it is running with vim or nano or whatever, those changes will be over written when transmission stops.
    The solution is to either change settings from the GUI, or make sure there is no transmission running, then edit the config file and save it. Everything should then work so long as you haven't made a syntax error when editing the config file.
    Last edited by jrussell (2013-06-03 22:15:35)

  • Where does Mail keep its hidden cache of auto-complete email addresses.  I am plagued with an incorrect email adress I can't get rid of.  Have made sure it's deleted from Contacts and made sure it's deleted from "previous recipients" list in Mail - i

    Where does Mail keep its hidden cache of auto-complete email addresses.  I am plagued with an incorrect email address I can't get rid of.  Have made sure it's deleted from Contacts and made sure it's deleted from "Previous Recipients" list in Mail.  But it still keeps reappearing ... obviously a secret cache file hidden somewhere?

    Autocomplete has nothing to do with this problem.
    From the Mail menu bar, select
              Window ▹ Connection Doctor
    Look for a disused SMTP (outgoing mail) account in the window that opens. Double-click it. Another window will open, showing a list of all the outgoing mail accounts. The unwanted one will be selected. Click the minus-sign button to delete it, then click OK.
    If there's more than one unwanted account, repeat.

  • Why does my ipad mini keep glitching.  We keeps randomly doing stuff on its own while on not even touching it?  I've tried restarting it by holding down lock and home button about a thousand times, it never works.  so could you please help?? thanks(:

    why does my ipad mini keep glitching!! /:

    Your iPhone doesn't require as much power to charge as your iPad needs so there is a possibility that the charge could have a problem even though you were able to charge the phone. If you can try a different power adapter and still have no luck, then the only thing left - IMO - is to contact Apple support and see what they advise.
    BTW  ....   Copied from your first post ...
    i then decided to do a reset or restore by pressing and holding the home button and the sleep/wake button down.
    I'm not trying to be a nitpicker - but what you described is a hard reset and your post gave no indication that you tried a software restore - which I referenced in my post. That's why I suggested the restore.
    Many times restoring the iPad to factory settings can help "revive" the device. If you have tried restoring according to the two support articles that I directed you to and still have no success, you are probably out of luck getting any further help on this site. That's all that you can try at this point at least AFAIK.

  • Nested Sequence issue: keyframe scale setting changes after rendering?

    Hi,
    I'm using PremierePro CS5.5, and have been having this same issue since CS4. After nesting a group of clips, I make the timeline effects entries to animate the nested sequence. For this example, let's say I start at 00.00 with the scale set at 150%, and end the sequence with the scale set to 300%. Just zooming in. Looks OK, so I hit return and render the nested sequence. It plays back, all is good, but after it stops the 00.00 setting magically changes to 100% or some other percentage.  I've tried everything I can think of, from selecting Hold or Linear for the keyframe, to deleting all the keyframes and redoing the settings. It only happens with nested sequences and it seems to only be the scale setting that goes flukey. Anybody else have this happen and could you tell me what I am doing wrong?
    Thanks,
    Christy

    Thanks for checking it out Jim. It doesnt happen every time, you know how that goes... just often enough to drive me batty. I'm doing animated whiteboard videos. Lots of short bits of video layered with graphics and stills, some effects, then all that is nested and sometimes the rate compressed. Then I zoom in a bit and that seems to be the last straw. Maybe I am just doing too much? It's a simple, uncomplicated look to the finished piece, but it takes a lot of cuts and tweaks to get it that way.

Maybe you are looking for