Does a new 3TB iMac (August 2014) work with bootcamp?

I have ordered a new iMac (August 2014) with a 3TB Serial ATA Drive. Have the issues with 3TB iMacs and bootcamp been resolved? Will i be able to partition my hard drive and install windows with bootcamp?
Thanks

I want to make sure you understand what I want to do. I don't want to do an external install. I want to buy a MacBook or Macbook Pro and replace the hard drive with an Intel X25M 160GB solid state drive. Then I want to use bootcamp and install Windows XP. I will mostly use OSX but there are occasions where I need windows. Now because of the above linked review from Amazon this could be a problem with this drive?
Thanks-Ray

Similar Messages

  • Does the new command 2 binary format work with Apple Push Notification Service? I receive an invalid response status code of 128.

    Does the new command 2 binary format work with Apple Push Notification Service? I am sending 2 messages with the same payload to 2 different devices. None of the messages display on either of the devices. It seems that at least 3 should have been displayed. For my first device, I received a response with an invalid status code of 128 and the message identifier is 2 indicating that the first message was OK. However no message was displayed on the phone. For the second device, I did not receive any error response, but no message was displayed on the device.
    Does ANS perform any validation on the message identifier? The Local and Push Notification Programmin Guide says the message identifier is:
    An arbitrary, opaque value that identifies this notification. This identifier is used for reporting errors to your server.
    I know that the device tokens are valid because the same tokens work when I use the legacy basic or enhanced formats. The phones display the messages correctly when I send to ANS using the old ANS message format.
    Here is the data and the response:
    Sent to ANS: 2 0 0 0 158 1 0 32 120 107 166 143 171 157 143 169 70 135 12 135 246 142 64 224 244 44 116 4 154 65 115 192 206 28 189 56 174 0 172 16 2 0 23 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 65 66 67 34 125 125 3 0 4 0 0 0 2 4 0 4 83 7 119 141 5 0 1 5 1 0 32 120 107 166 143 171 157 143 169 70 135 12 135 246 142 64 224 244 44 116 4 154 65 115 192 206 28 189 56 174 0 172 16 2 0 23 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 65 66 67 34 125 125 3 0 4 0 0 0 3 4 0 4 83 7 119 141 5 0 1 5
    ANS returned an error: 8 128 0 0 0 2
    Sent to ANS: 2 0 0 0 158 1 0 32 4 239 182 26 13 237 170 136 41 243 181 57 120 208 135 19 101 102 212 70 55 244 251 255 160 125 82 9 10 143 72 17 2 0 23 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 65 66 67 34 125 125 3 0 4 0 0 0 5 4 0 4 83 7 119 147 5 0 1 5 1 0 32 4 239 182 26 13 237 170 136 41 243 181 57 120 208 135 19 101 102 212 70 55 244 251 255 160 125 82 9 10 143 72 17 2 0 23 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 65 66 67 34 125 125 3 0 4 0 0 0 6 4 0 4 83 7 119 147 5 0 1 5
    ANS did not return a response.

    Hello, can you please help me ?
    You specified sample payload here:
    TerrellFromLockhart wrote:
    I finally got this to work. The picture in the Programming Guide is very confusing. The solution was to prefix every message's frame data with command 2 and that messsage's frame data length. Here is a sample:
    ANS frame: 2 0 0 0 77 1 0 32 120 107 166 143 171 157 143 169 70 135 12 135 246 142 64 224 244 44 116 4 154 65 115 192 206 28 189 56 174 0 172 16 2 0 21 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 63 34 125 125 3 0 4 0 0 0 2 4 0 4 83 7 199 195 5 0 1 10 2 0 0 0 77 1 0 32 120 107 166 143 171 157 143 169 70 135 12 135 246 142 64 224 244 44 116 4 154 65 115 192 206 28 189 56 174 0 172 16 2 0 21 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 63 34 125 125 3 0 4 0 0 0 3 4 0 4 83 7 199 195 5 0 1 10 2 0 0 0 77 1 0 32 120 107 166 143 171 157 143 169 70 135 12 135 246 142 64 224 244 44 116 4 154 65 115 192 206 28 189 56 174 0 172 16 2 0 21 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 63 34 125 125 3 0 4 0 0 0 4 4 0 4 83 7 199 195 5 0 1 10
    About to read response at Thu Feb 20 15:40:20 CST 2014
    SocketTimeoutException
    2 - is clearly command
    0 0 0 77 - frame length
    1 - item Id
    what's 0 32 ? According to this page https://developer.apple.com/library/ios/documentation/NetworkingInternet/Concept ual/RemoteNotificationsPG/Chapters/Commu…
    Item id  should be followed by item length. But item length is obviously greater than 32 because device token's length is 32. Can you please explain why 0 32 were used? and do you have any insight on item id meaning ?

  • Does the 27 inch iMac 3.2GHz work with a step approximated sine wave?

    Regarding the 27 inch iMac 3.2GHz Intel Core i3 Apple Computer... does it work with a step approximated sine wave?

    In configuring a UPS uninterruptible power supply with an iMac, APC asked, "Does the 27 inch iMac 3.2GHz Intel Core i3 Apple Computer work with a step approximated sine wave?"
    References checked
    http://store.apple.com/us/product/T6566LL/A
    http://www.apc.com/products/resource/include/techspecindex.cfm?basesku=SUA1500RM2U
    http://store.apple.com/us/product/H0880LL/A
    http://www.apc.com/products/resource/include/techspecindex.cfm?basesku=BX1500G

  • Does the new Macbook Pro 13 2011 work with the Intel SSD?

    I've been trying to upgrade my macbook pro to an ssd (using stock original 5400 rpm 320 gb HDD) but so far I've been reading for like 2-3 hrs and came to a conclusion. Intel is the most reliable and most highly recommended. However, Intel SSD doesn't work with the new Macbook Pro 13" & 17" because of some cabling SATA III issues. Does the issue still remain or has it been fixed? If it hasn't been fixed, what is the current most highly recommended and reliable and best in terms of speed, reliability, and just...best SSD available that works best with the 2011 MBP? Can anyone help me out? Ive been reading that OCZ and others are faster than Intel but less reliable (higher failure rates) and MBP can't take advantage of faster 6/Gbps RAID III or something. help me!!! Should I just wait?

    If you search the web, you will predominately read about problems, not good experiences.
    I don't believe Intel is any less subject to issues, than the Sandforce SSD drives.
    Buy from a reliable source with a good return policy and warranty.
    OWC is well regarded.

  • New small WIRED keyboard not working with bootcamp

    Greetings from Stuttgart, Germany
    I just bought one of these new small WIRED keyboards for my macbook pro (early 2008/not unibody).
    It's working fine with OSX but not with my bootcamp vista business x64: the fn-key is not recognized. After inspecting the device manager I found out that the keyboard is not recognized as an Apple keyboard like my old one (with numeric keys).
    Afer updating bootcamp to version 2.1 I uninstalled the keyboard from the device manager, plugged it in again and it was still not recognized as an Apple Keyboard
    Is there a way to manually force vista to use apple keyborad driver? Or is there an update for bootcamp on its way to solve the problem?
    Best wishes,
    Wolfgang Gross

    UPDATE: a possible solution that is NOT working:
    in device manager, for both USB Human interface devices associated to the a hardware id (05AC/021E) of the keyboard:
    Update driver > browse my computer.. > let me pick.. > show compatible hardware.. > Apple Inc./Apple keyboard 2.1.0..
    Doesn't change the keyboard (mis-)behaviour

  • I have just purchased a new iMac OS Xlion version 10.7.3 and I'd like to install Windows. I have a disc for XP but the Boot Camp Assistant manual only refers to Windows 7. Please does anyone know if it will it work with XP.?

    I have just purchased a new iMac OS Xlion version 10.7.3 and I'd like to install Windows. I have a disc for XP but the Boot Camp Assistant manual only refers to Windows 7. Please does anyone know if it will it work with XP.?

    Get a Virtual Macine software program, Parallels, VMware Fusion or VirtualBox, and install XP in a virtual machine.
    You can't install XP in a Boot Camp Partition with Lion or Mt Lion, only Win 7.

  • How do i install boot camp on a brand new 3tb iMac osx 10.8.2

    how do i install boot camp on a brand new 3tb iMac osx 10.8.2?

    Note: At this time BootCamp doesn't support 3TB drives - this is due to a memory allocation issue with Windows. Check out this article on a/an (unreliable) work around. I say unreliable because some people are reporting success and others failure. At this time if you really need Windows it probably would be better to use virtualization software like Parallels, VMWare, or VirtualBox.

  • Hi,,does the new 2011 imac 27 inch U.S version  support any pal signal inputs as video or hdmi through the video recorder device or kanex xd ?

    Hello,,
    I have 1 question please,,,
    does the new 2011 imac 27 inch from USA support or lay any PAL signal ??
    as for example
    I have a friend who lives in the middle east &  has kanex xd & he wants to connect it with the imac 27 inch from Satellite receiver  or PS3 though HDMI cable,, but yet the signal is PAL not NTSC in the middle east,, so will the imac 27 inch play the movie from the satellite in full colour or in blue & says cannot play the movie because its not NTCS ?  because this is U.S version  of imac then he might need an convertor?
    the same as if he want to record any hdmi or analog  device from his video recorder  device,,but the input is pal,,so will it plays normal in the U.S machine or will he find any trouble ???
    so can you pls give me an advice for him
    should he buy the imac from the U.S store or the europe store ??
    N.b : there is no mac store ONLINE in the middle east espicaly in Gulf, thats why he want to buy the imac from the mac store online,,
    and thank you

    Hello,,
    I have 1 question please,,,
    does the new 2011 imac 27 inch from USA support or lay any PAL signal ??
    as for example
    I have a friend who lives in the middle east &  has kanex xd & he wants to connect it with the imac 27 inch from Satellite receiver  or PS3 though HDMI cable,, but yet the signal is PAL not NTSC in the middle east,, so will the imac 27 inch play the movie from the satellite in full colour or in blue & says cannot play the movie because its not NTCS ?  because this is U.S version  of imac then he might need an convertor?
    the same as if he want to record any hdmi or analog  device from his video recorder  device,,but the input is pal,,so will it plays normal in the U.S machine or will he find any trouble ???
    so can you pls give me an advice for him
    should he buy the imac from the U.S store or the europe store ??
    N.b : there is no mac store ONLINE in the middle east espicaly in Gulf, thats why he want to buy the imac from the mac store online,,
    and thank you

  • Does the new 2011 iMac come with a osx lion preinstalled or a osx lion USB drive

    Does the new 2011 iMac come with a osx lion preinstalled or a osx lion USB drive

    I just bought the 17" MacBookPro the other day with Lion preinstalled and wanted to install Lion on my iMac. It makes sense that I should be able to upgrade for free you spend all this money on Apple products, give us apple supporters a break. Maybe this is something that Apple overlooked and in the future there will be a fix.
    I read up on forums and I finally called AppleCare they said that I should be able to install Lion on 5 other computers but only if purchased in the store, this doesn't make any sense. I feel like I already purchased a copy and that copy should be able to be installed on another computer. It should be as simple as logging in app store with the same apple ID and it be there to install on my iMac. If apple is trying to make everything user friendly, device syncying and convenient well it's not; this is just something they think of. I refuse to pay $30 for another copy. Fix this issue APPPLE!!!
    Because if those who bought computers in July that didn't have Lion preinstalled can obtain a free copy to install in 5 computers. I should be able to do the same with the Lion that I bought preinstalled it's just make sense to me.

  • Does the QT MPEG2 Playback Component install & work with QT X ?

    I am installing a new iMac with Snow Leopard.
    Does the QT MPEG2 Playback Component install & work with QT X ?
    (btw, I have already done the optional install of QT7 from the SN DVD).

    Does the QT MPEG2 Playback Component install & work with QT X ?
    I cannot get "muxed" MPEG2 content (e.g., VOB) file to load in QT X but both QT 7 Pro (with usual audio limitations) and MPEG Streamclip still function normally under Snow Leopard. (Since I don't normally use QT X, I had to actually run a quick test to see what would happen and haven't really performed any real tests. So take my comments with a grain of salt at this time.)
    with such files on my PB Pro.

  • Does anyone have an Android phone that works with the hands free on a 2015 Honda Civic EXL -Nav?

    Does anyone have an Android phone that works with the hands free on a 2015 Honda Civic EXL -Nav?   I don't care about the HondaLink- just the hands free phone call/receive.

    My 5 starting doing this today....constant rebooting and or shutting off even after restoring to new phone.  Would love some impu!!

  • How do I get my new 27" Thunderbolt Display to work with my mid-2010 Macbook Pro?

    How do I get my new 27" Thunderbolt Display to work with my mid-2010 Macbook Pro? Or am I SOL?
    Hardware Overview:
      Model Name:    MacBook Pro
      Model Identifier:    MacBookPro6,1
      Processor Name:    Intel Core i7
      Processor Speed:    2.8 GHz
      Number of Processors:    1
      Total Number of Cores:    2
      L2 Cache (per Core):    256 KB
      L3 Cache:    4 MB
      Memory:    8 GB
      Processor Interconnect Speed:    4.8 GT/s
      Boot ROM Version:    MBP61.0057.B0F
      SMC Version (system):    1.57f18

    You can't. Theoretically, Thunderbolt devices that only transfer video and audio should work with Mini DisplayPort MacBooks like yours, but it's not the case of the Thunderbolt Display. Its firmware doesn't allow it to be used with non-Thunderbolt Macs, so you can't use the Thunderbolt Display with the Mid 2010 MacBook Pro.
    Instead, you have to look for another screen, or you can get an adapter and connect the MacBook Pro to a TV

  • Does the "Mini DisplayPort to VGA Adapter" work with all Samsung tv models?

    Does the "Mini DisplayPort to VGA Adapter" work with all Samsung tv models?

    It's a VGA adapter. Nothing special about that. If your Samsung monitor supports VGA then it will work.
    But why not go completely digital and use a Mini DisplayPort to HDMI adapter to skip the analog conversion? It also supports passing audio over HDMI.
    About Mini DisplayPort to HDMI adapters

  • New ipod touch won't work with itunes 10.6.3 says it needs 11.1 but I cannot load that on my macbook using OSX 10.5.8 any way around this?

    New ipod touch won't work with itunes 10.6.3, says it needs 11.1 or newer but I cannot load that onto my MacBook running on OSX 10.5.8 - is there anyway around this?

    No. If your MacBook has an Intel processor you can update to OSX 10.6.8 and then install the latest iTunes.
    A 5G iPod with iOS 7 requires that if you have a Mac you have OSX 10.6.8 or later.
    You can get 10.6.8 here:
    http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

  • What is better Mac Mini or Mac Pro and 4K 40" screen or iMac 5K for work with Exel

    I am working on Macbook pro retina for around 16 hours a day,  it is ok but the screen is to small. I am opening about 25 - 30 EXCEL windows, 20 - 25 safari windows at the same time. Excel windows are small, they only show 40 rows and S column   Now I am considering buying  iMac 5k ( but the screen is only 27", however a very high resolution but I think that fonts and digits displayed may be too small ). I am also considering Mac Mini or Pro with 40" 4K TV ( 4k computer monitors are 27 - 31" , so better idea would be purchasing iMac 5k ) . The problem is that 40 - 42" TV don't have Display Port ( I can't find  it anywhere )
    Please help me to choose what would suit my needs better. I need large screen to work comfortably with an Excel sheets.  What is better? Mac Mini or Mac Pro and 4K 40" screen or iMac 5K for work with Excel ?. The other problem I have is that when I spend  16 hours at work with retina macbook , my eyes are ok. Using the  30'' Dell screen 2560/1440 my eyes are tired after 2 hours.
    Thanks for your help on advance
    Best regards
    David

    Currently you can only get 4 K at 30 Hz via HDMI. Some users have reported jerky curser movement because of the 30 Hz.
    I would go for the 5K iMac. You can add a second screen at 4K.
    FaceTime HD camera
    Simultaneously supports full native resolution on the built-in display and up to 3840 by 2160 pixels on an external display
    Support for extended desktop and video mirroring modes
    The Mac Mini supports:
    Support for up to two displays at 2560 by 1600 pixels, both at millions of colors
    Thunderbolt digital video output
    Native Mini DisplayPort output
    DVI output using Mini DisplayPort to DVI Adapter (sold separately)
    VGA output using Mini DisplayPort to VGA Adapter (sold separately)
    Dual-link DVI output using Mini DisplayPort to Dual-Link DVI Adapter (sold separately)
    HDMI video output
    Support for 1080p resolution at up to 60Hz
    Support for 3840-by-2160 resolution at 30Hz
    Support for 4096-by-2160 resolution at 24Hz
    The 2013 Mac Pro can use three and more displays:
    Mac Pro (Late 2013): Using multiple displays - Apple Support
    I would go for multiple screens

Maybe you are looking for