Does a purchased movie stream over the net or from my Mac?

If I buy a movie from iTunes on my Mac and watch it on the AppleTV is it streaming from the iTunes Store or from my hard drive?
Does it matter if I start the movie from the Movies/Purchased section or from the Computers/Movies section of the ATV?

Michael Napier wrote:
Does it matter if I start the movie from the Movies/Purchased section or from the Computers/Movies section of the ATV?
If you choose it from computers > movies, it streams from your computer.
If you choose movies > purchased, it streams from the iTunes Store (via the internet)

Similar Messages

  • Issues between mac and iPad: after resetting my mac i can't synchronize new movies downloaded in the iTunes store from my mac to the iPad. any idea what to do?

    Hi, I cant synchronize moves downloaded from the store to my mac with the Ipad anymore after I had to reset the mac. It works for older movies still but not for new ones. I cant watch them on the mac but they just dont synchronize with the ipad. any idea?

    What happenes when you try?
    Error message?
    What does it say?

  • How do i recover my purchased movies on itunes. the icloud does not show them and i have contacted apple twice before about this issue

    how do i recover my purchased movies on itunes. the icloud does not show them and i have contacted apple twice before about this issue

    Not all movies qualify for download on demand from iTunes in the Cloud, the rights may be reserved by the content provider and can vary by region. What response have you had from iTunes Store support?
    If you have still have the computer they were on it might be possible to extract the hard drive, mount it in an external drive bay and recover the content from it.
    tt2

  • Can anyone advise on how to share large files over the net?

    Hi all.
    So I need to share large video files over the net.
    The files will be between 5 and 10 GB
    Does anyone have a solution for this?
    I have been using my ftp program and just giving the recipient the download link.
    But its affecting my upload quota and the recipients download quaota with our ISP's.
    Is there an easier way at all?
    Thanks.

    Contact the ISP for a temporary exception on the quota, or to get an explanation of how long before you can send a second segment for the download.  You can split large downloads by UUEncoding them, or making separate disk image segments with Disk Utility.  You could also find out if any local WiFi hotspots don't have a quota issue.  Lastly, you could send a thumbdrive by mail.

  • What is the ipad2 activation code to use in viewing NETFLIX instant view DVDs over the net?

    Where do I find the activation code to be able to watch NETFLIX streaming DVDs over the net??

    danielfromlaurel wrote:
    I get the statement "streaming on this device is not supported on your plan".  My plan includes 'unlimited streaming' using the IPAD2 app.
    Dan
    Just to confirm: are you sure you entered the correct account info on the iPad?  (Some of my client's have more than one Netflix account.)  Then try resetting the iPad.  That often "fixes" many issues.  After that, you'll probably need to contact Netflix support to confirm that you do have streaming.  Otherwise possibly restoring your iPad so that it'll wipe the existing Netflix config, so you can re-enter it again.

  • I try to generate a chm file over the net and I get a compiling error message

    Hi all,
    I am trying to generate chm files over the net, and the same project when I am generating the same chm locally works fine, however when I am attempting to generate the same chm on a network location, it gives me a compiling error and aborts the generation. It is also keeping the chm file open afterwards, so I have to reboot the machine.
    It is RH7 working on a Windows XP Pro 32 bit.
    Thank you

    It is not a project issue. RoboHelp is just not designed to work that way but like a lot of things, some people can use them outside what they were designed for. However, just because some people can work that way, it does not follow everyone can.
    I've seen people with projects on a network and they say have been doing it for years so it must be OK. A while later they come back and say the problem is fixed since moving it locally.
    Sorry but it looks like you are stuck with working the way you do or getting your colleague to do it. It might be as simple as he is on a different bit of your network.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • RTP Streaming over the internet

    Having some problems streaming over the internet - probably because im doing it wrong.
    I can stream over a network fine using Transmit2.java.
    But when i try over the internet cant pick up the stream.
    Im using www.whatismyip.com to get the internet IP of the 2 computers im trying to stream to and from - and using these in the code, but nothing happens.
    Help?

    natdeamer wrote:
    Having some problems streaming over the internet - probably because im doing it wrong.That's correct, you're doing it wrong.
    Im using www.whatismyip.com to get the internet IP of the 2 computers im trying to stream to and from - and using these in the code, but nothing happens.99% of the time, your public IP actually addresses your router, rather than your computer. That means your computer is not publically addressably by it's IP address alone. You'll need to do something called a "NAT holepunch", which you can look up online. Also, I've included two links to discussions I've had with people about the same issue.
    [http://forums.sun.com/thread.jspa?forumID=28&threadID=5355413]
    [http://forums.sun.com/thread.jspa?forumID=28&threadID=5356672]

  • Why didn't my purchased movies transfer over from my iTunes to my new ipad2?

    Why didn't my purchased movies transfer over from my iTunes to my new ipad2?

    In iTunes, with you iPad plugged in, did you make sure the "Sync Movies" box is checked?

  • Screen  moves all over the place

    Out of no where my screen now moves all over the place. The width has become shorter and the height as become much larger. I have a magic mouse when I move it to the left the screen moves to the right and verse a versa. I have a early 2008 macpro 3.1, 6gb memory, 2.8 ghz and nvidia geforce 8800 gt 512mb. Does anyone have any idea of why this is happening, please help.
    Much Appreciated
    Thank You

    You have probably accidentally turned on Zoom, a feature in Universal Access. I did this to myself yesterday.
    The usual solution is to enter
    System Preferences > Universal Access ... pane and shut it off. But I found mine was not enabled, so I could not just turn it off.
    I had to enable it, use the keyboard shortcuts to zoom in and then all the way out, then shut it off. That cured it.

  • Back To My Mac: Anyone get it to work over the net?

    I can't. It works fine on my home network, an apple extreme and several expresses. But over the net it doesn't work at all. I've tried both from work, and also by logging on to my neighbor's airport network. in both cases, the icon for my home iMac disappears.
    I downloaded the guide from the Apple site for BTMM and followed the instructions, but nothing seems to work.
    Anybody have any luck with this? than

    Do both routers have to be configured correctly? Both the router you're sending from, and the router your mac that's being controlled is talking to? I thought it was just the later...
    <<Even if these routers do support one of these protocols and have this support enabled, odds are good your office's firewall is simply going to block any traffic it doesn't recognize. Similarly, unless your neighbor has agreed to let you configure his or her router as you please, I would not expect this to work, either. >>

  • Report Generation over the net?

    is there ANYTHING out ther for this? (ie crystal reports designer)
    i want to add something to create ad hoc reports over the internetweb, but from what i can see there is nothing out there that is a "viable" solution.
    am i going to have to develop something by myself? if so what do you think the best approach would be, javascript? perhaps flash?
    i must stay away from anything that is IE centric, for obvious reasons
    thanks.

    We use jfreechart. It is not as fully featured but it does the job for us and is free.

  • Nokia - Firmware over the net and over the air gen...

    Don't know if anyone else noticed this, it came out quietly as far as I can see, but now nokia are offering firmware upgrades to N series devices over the net (and over the air if you've an N80). See here http://www.nokia.co.uk/nokia/0,1522,,00.html?orig=/softwareupdate . A stroke of genius as far as I'm concerned.
    As an aside, this also puts the latest firmware for Orange on the N70, and gives you an option to disable the dreaded "Homescreen of Death". Doesn't get active standby back though unfortunately.

    No N80 support at this time though.
    I'm keeping my eyes peeled though....
    Orange Handsets : Nokia 51 > NK702 (6130) > 6210 > 6310i (silver)> 7210i > 6230 > 6230i (silver) > N80 (silver) > N95-1
    T-Mobile: N96

  • Screen sharing over the net. Is it possible.

    I was wondering if someone with screen sharing abilities could help out. I was wondering. Is it possible to share screens over the net. For example, my mom is like a 100 miles away. Running Leopard. How could I access her screen so that I could show here what to do. Heres the states, her computer has a router. My computer has a router. How can we sharing screens. Where would be long into and how. I know of the program in System/corservices/screensharing When I click it it asks for host. I dunno if that was the right way to go but any help here would be amazing. Thank oyu.

    It is possible apparently, but if there is a router in the equation, that may well cause problems. If your Mom is using a Mac, this screen sharing facility is also available via iChat.

  • Bought a Winegard  indoor HDTV antenna for streaming over-the-air TV. Will my Apple TV work

    FlatWave Mini
    FlatWave
    I Am considering cutting my cable service and have bought a Winegard indoor HDTV wall mount antenna for streaming over-the air tv? I would appreciate an advice you might give me on this project. Will my Apple TV work with this setup? Thanks so much.

    appetv is a media box not a OTA related product in any way
    it use the LAN network to play shared media from your computer
    and if it has an Internet connection it offer a range of Internet streaming services
    read more
    http://www.apple.com/appletv/

  • How do i transfer files between two macs over the net (FTP)

    Hi,
    Couldn't find a thread like this, apologies if its been discussed already recently, I'm trying to enable two iMacs both Intel, both running 10.4.10 to be able to swap files (quite large 350MB) over the net just using Tiger.
    We both have .Mac accounts but the files only upload properly to our iDisk 1 out of 3 times and its getting annoying, I basically want my mate to be able to drag a file off my HD onto his via the net using no other programs just Tiger, is this possible?
    If not, what's the best free program to use.
    Thanks

    You'll have to get an FTP client as the Finder only reads, not writes to an FTP server. I can't suggest a free one. You will also need to open your computers up to the world. If you don't know how to do that, search for Port Forwarding and your particular router. You'll have to open up port 21 for FTP.
    Plain old FTP is not very secure, so you shouldn't leave it open all the time. SFTP is Secure FTP, and you can use Fugu to use it. You'll still need to set up Port forwarding, but you can pick whatever port number you want. Fugu lets you pick the port number. You should set up standard users on each machine and make a sftpTransfer folder in the /Users/Shared/ folder. This will allow each of you to access the files. sftp allows anyone to see the directory structure, but still maintains the permissions from OS X. So, as standard users, you can look into each other's Home folder, but you won't be able to get into the subfolders or transfer files to or from any unshared locations.
    By the way, I wrote an entire post describing how to use sftp from the command line before I decided to look for a client app for you. Then I found Fugu and changed it all.
    Edit:
    I forgot to mention you must turn on Remote Login in the sharing pane, and you'll have to use port 22 as this is the only one Mac OS allows remote connections on.
    Message was edited by: Barney-15E

Maybe you are looking for

  • Error while doing AUC Settlement in KO88

    Hi I am getting the below error while doing KO88. I have maintained the Allocation structure for FXA and given the cost element group in the Source field & Given FXA in Receiver category and selected By cost element option aginast Receiver category F

  • Need help reinstalling OS X on my used Macbook pro

    I'm not sure if this is the right place for this question but anyways: I'm totally new to the macbook, but my company does iOS apps and I want to broaden my knowledge base. So I bought a mid 2010 macbook pro on ebay last week. When I got it I realize

  • ALV-Grid - Get cursor position

    Hi, I replaced the table control in my dynpro with a custom container and placed an ALV-Grid in there. So, my problem is now to get the cursor position when the user double clicks at the text in a cell. It´s important for me to know at which position

  • Problem with using two Nanos with one XP computer

    I've got two profiles set up on an XP Home Edition OS. I have iTunes loaded within each profile. When I move from one profile to the other and I exit the iTunes on the first profile and enter the second profile...when I try to launch iTunes on second

  • [SOLVED] acpi-cpufreq fail to load

    I had been using cpufreq to use the ondemand governor for a long time and it worked al right. Last update changed cpufreq to cpupower and I can no longer use cpu freq. scaling. And insmod won't load the acpi-cpufreq mod. I remeber well I used this mo