Does a Speedlite 420EX made in 2001 can work with a new EOS 60D?

HI!
I have a Speedlite 420EX bought in 2001, working perfectly until now with an EOS300.
Last week I bought a new EOS60D and I would like to know if this camera can work with this old flash.
I am concerned about that and need a confirmation that turn it on will not burn the EOS60D.
My best regards,
Fabio.

Fabio
Just to bolster what Skirball said: I am still using the 380-EX that was made for the Elan 2 and Elan 7 FILM cameras, and it works fine with my Rebel, S5-IS, and SX40-HS - and that means ALL speedlite features - including the motorized zoom head. Until I just recently got the 430-EX-II, the 380-EX was the only external flash I had for my Canon cameras, so you should have no problem with your 420-EX.
Regards,
Ted

Similar Messages

Can anyone get Aperture to work with a new Canon 60D?

I am using version 2.1.4 but dont want to upgrade to V3 unless I really really have to. Help!

The support for RAW files must be revesed engineered because the camera companys don't share that information with either Adobe or Apple. So when a camera is released has very little to do with when they are supported. It is more a matter of how many changes were made in the new model. If most of the stuff for the old model only needs to be slightly modified then it quick. If on the otherhand it a total rewrite then it can take some time to get it supported.
Allan

Does Aperture work with the new EOS 5D Mark II??? Getting an error message

I have a 5D Mark II and just tried to upload my images for the first time into Aperture. I'm getting a ton of gray boxes and when I click on one, it turns maroon and says "Unsupported Image Format." Please help! These are wedding images so I'm pretty nervous about something happening to them. Also, I have Aperture Version 1.5.6.

no worries dude
the regular RAW format for the 5dmkII is supported with the latest version of aperture and OSX (with the proper RAW update files)
you can use DPP (included with your camera if you don't wanna upgrade (but 2 is WAYYYYY better then 1)

Does anyone know if the Nike+iPod kit works with the new 2G Nano?

The reason I ask is that Gizmodo says the bottom dock attachment is offset on the 2G Nano.

I can confirm that you have a good ipod nano with a "bad" firmware.
EACH TIME I use my 2Gb ipod with the sport kit it freezes ! Without sport kit..no problem at all !
My ipod nano with firmware 1.1.1. freezes when:
- I press the end session button after a long session (in this case it maintains the training also after the reset). with short sessions..no problem.
- If I forget to not set the hold button during session, the armband "press" without control some combination of buttons which freezes the ipod (session lost after reset)
- If I press /<< button instead of menu to return to the previous screen at the end of the session. (session lost after reset)
- Without receiver inserted I have pressed to activate sport kit - ipod require the receiver - I have pressed to return to the previous screen and ipod freezes.
Why Apple doesn't insert a "timerized autosave data sessions" to avoid to loose sessions in case of freezing and reset ?
Best Regards

Does 2 firewire audio and video interface can work together on FCP ?

hello,
My audio interface is a TC Electronic Konnekt 24D
my video interface is a Canopus ADVC 110
my hard drives are plugged in firewire too
and I use Final Cut Pro 5.0.4
So, the konnekt is recognized by FCP only when the Canopus is not plugged. And even then, the audio sometimes drop out and sometimes causes the app to crash, so that I have to trash the preferences
When I plug the Canopus, the Konnekt 24D is recognised by OS X but not FCP
I want to use the voice over tool with the konnekt 24D, so what should I do ?
Does 2 firewire audio and video interface can work together ?
If so, maybe I only have a driver problem from TC Electronic.
But if not, I have to change this interface. Let me know if only RME, MOTU, Presonus and Edirol work, as it is said on apple's webpage for hardware compatibility
thanks
eMac G4 1,25 Ghz Mac OS X (10.3.9)
eMac G4 1,25 Ghz 1 Go RAM DDR Mac OS X (10.3.9)

The 1082 does show up as a possible input when I open
the VO tool.
Ok. So an audio interface can be plugged to FCP without crashing the app. Because of the Konnekt driver problem, I wasn't shure of this.
I use my Aja box for export & external monitoring.
All my audio sources run back into the Tascam and I
use the analog mixer in the 1082 to monitor different
sources.
When I view external video, the audio follows it to
keep sync.
that's exactly what I want with other I/O interfaces. I'd like to monitor video with the canopus ADVC 110, and monitor audio with the Konnekt 24D (or another interface if this one is not compatible)
I also imput dailies with a deck or a camera (DV or HDV) but that's not the point here.
I want to imput audio with the Konnekt 24D because of its audio quality. Not audio sync to video dailies. But voice over, in sync with FCP video playback (for me, tha ADVC 110)

I previously made an iMovie project, but with the new version of iMovie (10.0.1) it does not have the option to import. How do I retrieve my old iMovie project?

I previously made an iMovie project, but with the new version of iMovie (10.0.1) I cannot import the project. How do I retrieve and import my old iMovie project?

You have to upgrade your iMovie 9 projects from iMovie 10 before you can use them. See:
http://help.apple.com/imovie/mac/10.0/#mov902ad0c31
Geoff.

Does T61p can work with any USB3.0 Express Card?

Does T61p can work with any USB3.0 Express Card?
For example AKA BC398 with chip NEC 700200?
Or any other?

i don't think many people have tested these cards, theortically it should support them, but not at the full speed. Since the ExpressCard slot is 1.0 standard.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Does PI need a direct connection to third party or can work with a proxy server based connection to third party?

does PI need a direct connection to third party or can work with a proxy server based connection to third party?

Hi,
It basically includes 3 systems, one is our ECC sender system, middle one is PI box and third one is the receiver system. Data is successfully reaching to PI system from our sender system.Now we want to forward this to our third party system from PI box.
I want to know that such sending of data requires direct connection to third party or it can be done by proxy server based connection to third party.If it is possible then what are the steps to do this?
Regards-
Anuj Nogja

WCS does need WLC or can works with stands alone APs

Hi all, I'm student and curently reading about WCS capacity. I would know if WCS requier AP to pass through a WLC to work with WCS or if WCS can work with multiple "stand alone" APs (without any WLC)
Thanks.

WCS can work with standalone APs that you can add in WCS.
Nevertheless the configuration options are limited.
The configuration guide is a good resource for more information.
http://www.cisco.com/en/US/products/ps6305/products_installation_and_configuration_guides_list.html
Also you can get an evaluation license for WCS for 60 days for 20 APs.
You can download the software and play with it as well:
http://tools.cisco.com/support/downloads/go/Redirect.x?mdfid=279705270
WCS general product page:
www.cisco.com/go/wcs

Why does my iPhone 4 not have the panorama feature with the new iOS 6 ?

Why does my iPhone 4 not have the panorama feature with the new iOS 6 ? Can someone please explain this to me. I was already excited about it.

That was made available in iOS 5. To update, you may need to connect to iTunes

WiFi printer which can work with one cartridge also at a time (black or color) in a colour printer

All-in-one (OfficeJet or Inkjet) WiFi printer which can work with one cartridge also at a time (black or color) in a colour printer.
Even if colour cartridge is over, w/o replacing I can still print with black cartridge.
Which printer is suitable.

Since I upgraded to Firefox 19 from 18.0.2, on my Windows XP (SP3) laptop, I, too, can no longer open a new window. File-->New Window does nothing; also can no longer tear off a tab and open it in a new window (it stays where it is). Also, if I right-click on a tab and select Move to New Window, nothing happens. All of these worked fine in FF 18.0.2. All of these work fine with FF 19 on Windows 7. Only an issue on my XP laptop.
After trying to open a new window, and not seeing the new window come up (and yes, I waited a long time), I decided to close my current window, which had multiple tabs open. Instead of just closing, it pops up the message reminding me that I'm about to close all those tabs. If I say close, and then go into the Task Manager, the Firefox application has disappeared (as expected), but the firefox (and plug-in container) processes are still running. So I have to manually kill the Firefox process to get it to quit. it's as if it thinks there is another Window open (the one I tried to open but never appeared). This happens every single time! I've restarted my laptop, and that does not resolve the problem.
Is there a way to downgrade back to v 18.0.2 until this is fixed?

I just received a new macbook pro. I am looking for a usb3 external storage 500 GB drive. Some manufacturers of drives aren't for sure their drive will work with the new lion system. Does anybody have any suggestions for drives that will workw

I just received a new macbook pro. I am looking for a usb3 external storage 500 GB drive. Some manufacturers of drives aren't for sure their drive will work with the new system. Does anybody have any suggestions for drives that will workw

There seems to be a problem, just now, with the USB 3 ports on the new MBP's supporting eternal USB 3 drives. Some people have no luck at all - can't even recognize the drive - and some are reporting USB 2 speeds (those who drives are recognized). I'd call a dealer such as LaCie or OWC to see if they have USB 3 drives that actually work with MBP's with USB 3 ports. You may have to wait for a software/firmware update.
Clinton

I want to place an image in my InDesign document that can work with an address like this (\Resources\Thumb) rather than this (C:\Users\JSmith\Desktop\InDesign thumbnail Test\001\Resources\Thumb) is this possible?

I want to place an image in my InDesign document that can work with an address like this (\Resources\Thumb) rather than this (C:\Users\JSmith\Desktop\InDesign thumbnail Test\001\Resources\Thumb) is this possible? In a nutshell I want to point the link to an image in a directory that uses just part of the address.

I know this is something you can do in Maya with linked files. I guess InDesign just isn't there yet.
MW Design - Yeah I think "Relative paths" is the right term! I want to create a Layout with an image in the center of the page - and then duplicate my folder structure with that file. With that, I want to replace the Linked image file with a diferent image file of the same name. In effect having multiple files of the same layout with different images. I hope that made sense.

Does Microsoft Entourage 2008 for mac work with the new Mac OS X v 10.7 Lion

Does Microsoft Entourage 2008 for mac work with the new Mac OS X v 10.7 Lion?
I am just about to install Lion just need to check to see if if my work e-mail will work

Sarah,
Check this link:
http://roaringapps.com/app:2533
It contains some issues that people have encountered with Lion and Office 2008. It appears it can work, but you may have to go through some of the steps a few of the posters there have listed.
That website also contains a pretty large list of applications and if they will work with Lion.
Hope this helps! (I am not affiliated in any way with the site linked).

Does scripts of UCCX 9.0.2 will work with UCCX 10.5

Currently we are having UCCX 9.0.2-10000-71 installed on MCS server. We are planning to migrate on BE7K UCS server with version uccx 10.5.
1. Does scripts of UCCX 9.0.2 will work with UCCX 10.5
2. How i can restore historical data from 9.0.2 uccx to 10.5 uccx as new server will be having different IP address hence we cannot restore the backup. We need to create all configuration manually. Also uccx 9.0 was supporting Historical Reproting but 10.5 supports CUIC, so there is any way we can restore the reporting data so that we can pull old reports using CUIC as well.
Thanks & Regards
Netplace

Hi
Sounds like you have a lot to learn and should leave the upgrade to someone who knows the products.
1. Yes, typically they work, but testing this will be part of your upgrade process. The script may contain anything from basic steps (that will work) to complex stuff or embedded Java.
2. You would not restore the data. It's not possible. What you would do normally would be to change the IP address of the existing system either before or after the upgrade. CUIC and HRC are difference interfaces to the same DB, so it doesn't matter.
Regards
Aaron

Does a Speedlite 420EX made in 2001 can work with a new EOS 60D?

Similar Messages

Maybe you are looking for