Does a Watlow 96 need a modbus card or is it able to be directly hooked up with a RS232 cable?

Is it possible to wire a Watlow series 96 temperature controller directly to the computer using a RS232 cable?

A vi I just finished writing for a Melcor TEC controller uses a Watlow 96. It connects to the RS-232 and uses modbus protocol. Sorry about the late reply.
Attachments:
Melcor.llb ‏343 KB

Similar Messages

Does an iPod touch need a SIM card?

Hello Apple,
I would like to ask you how to find out my phone number on an iPod Touch -
Or do you put in a SIM Card into it?
Please reply,
Thankyou.

There is no SIM card or phone number associated with an iPod Touch. If you are attempting to set up FaceTime, you need to use an eMail address.
Stedman

Contacts issues - send contacts to at&t phone book or sim card? and un able to unsync email contact list with phone contact list

I have had several issues with my contacts on this phone. I cannot figure out how to send my contacts to the at&t phone book or to my sim card. The options/menu button in contacts is completely useless. It should give me the option on the sim card to transfer contacts form one list to another. I have already written on another forum about the contact list not letting me unsync one of my email contact lists and how I have 3 copies of all of my contacts because my email contacts are mixed in with my phone contacts.
BB really needs to fix this issue with the contact list because it is beyond frustrating. I even downloaded the new BB software today and it still hasn't been fixed.

OK...so this post is strictly about wanting to send your contacts to the SIM. That capability is one at a time only. And there's a reason for that.
The BB Address Book is robust, allowing you to have one name with multiple phone numbers and addresses. The SIM phonebook, on the other hand, is much less capable...if, for instance, you have one contact with three phone numbers in your BB Address Book, the SIM phonebook would require three separate entries to contain the same data (with the obvious duplication of the name on three separate records).
So, I must ask...why on earth do you want to send your contacts to your SIM? There are much better methods for moving your contacts from the BB to somewhere else...
Let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I am going to buy either a Mac Air or Mac Pro Retina 8GB RAM and 256GB. And as I have to still run Windows I will install Parallels 9. As the Mac are both 64bit machines does that mean I need to install Windows 7 64bit ? And office pro 2013 64 bit too?

I am going to buy either a Mac Air or Mac Pro Retina 8GB RAM and 256GB. And as I have to still run Windows programs I will install Parallels 9. As the Mac are both 64bit machines does that mean I need to install Windows 7 64bit or just install 32 bit? (Going with Win7 as I hate Win8). And I will install Office Pro 2013 64 bit too or 32 bit or is that automatically selected by the underlying OS (I use Word, Excel and Access mainly for a membership database of a local club) ? I am not a power user so would appreciate advice on way to go

Again thank you. If I only use word, excel and access in the Win environment and Mac OS for email and safari for internet do I need anti virus software . Ie my connection to the world is mac only and I use office pro only to ruin the club, newsletters, membership database etc. and of course anything I do there can drag/drop to the mac environ to email. That's my understanding anyway. Next will my existing .pst file copy directly into mac mail or do I have to runs translator as I recall reading something about that ages ago when I started thinking Mac

Been trying to use an external memory card reader with my macbook air- connecting via usb port, air does not recognize device nor the microSD card from my gopro - help

Been trying to use an external memory card reader with my macbook air… connecting via usb port, air does not recognize device nor the microSD card from my gopro … help

Some external ones do not work with the Mac's although most do. There are some driver compadibility issues with Mavericks, so I would wait for an update.

I have a Mac G4 (version=3.3) How can I connect it to my BT Broadband. It does not seem to have an AirPort card - do I need one and if so how do I get one? Many thanks

I bought a Power Mac G4 (version=3.3) second hand from my company. It is running Mac OS 10.2.8 and Microsoft Office X. I wish to connect it to my BT broadband hub. However, it does not appear to have an AirPort card and even if it did I was told that the BT hub mainly works with microsoft rather than apple products. Can anyone advise me how I can connect and what products I need to buy?
Many thanks

John Galt wrote:
These are readily available on eBay etc. and are not expensive.
See http://www.airportcardsdirect.com/ these cards are cheap and not sold via DOA-Bay.
John Galt wrote:
The PowerMac3,3 uses the original AirPort 802.11b card. It may also need a card adapter to enable it to mate with the internal connections - I'd have to check on that.
Not true. Those adaptors were intended for the iMac G3 (long outdated) and only the iMac G3. All G4 machines just take AP Cards the way they are.
John Galt wrote:
You should also look into upgrading it to OS X "Tiger" but make sure you get the original retail install CD. It will be black with a large "X". Grey discs are machine specific and will not work.
Actually I HIGHLY recommend upgrading to OS X Leopard. Tiger is no longer supported by hardly anybody (Apple, Adobe, etc) and Leopard is still the minimum for most things nowadays. If you want more life out of this Mac, then I would highly recommend installing Leopard. And as mentioned above you NEED a Retail DVD. (The Leopard DVD has a little Purple in the Center of the DVD and a BLACK X in the center.

Do I need a wireless card to use a router with my iMac or does the built in

I am having ComCast install a router at my home and they tell me I'll need a wireless card. I shouldn't need one with Airport Extreme installed should I?

Right - sort of.
You do need a wireless card to connect to a wireless router. However your Mac already has built-in wireless (almost every iMac does, only the original from 1998 didn't) so you're good to go - you don't need any extras.

HT5622 how i can active my apple id in first time?does it have need to gift card for activity?

how i can active my apple id in first time?does it have need to gift card for activity?

Either add a credit card or maybe another payment method will work
or
Create a NEW account using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before.
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card

Why does ipad 2 need a sim card?

Why does ipad 2 need a sim card? it doesn't have a phone function.

Andreas - Gothenburg wrote:
Why does ipad 2 need a sim card? it doesn't have a phone function.
If you want to use the 3G cellular data service - you need a sim card. If you just plan on using WiFi, then it doesn't matter.
The 3G cellular service allows you to connect the iPad to the internet in areas where WiFi is not available. You do not have to install the sim card in order to use the iPad as long as you just use WiFi. You can always purchase the service later if you don't want it right now.

[VIA] Do I need a video card to make this MB run?

My MSI KM4M-V arrived today. It replaced a Shuttle motherboard I just could not make it show anything on the monitor. I returned it as defective. Well, I just installed my MSI and darn it, the same thing is happening. Nothing shows on the monitor.
My son said I need a video card. It has a monitor connection sticking out the back, so I assumed it came equipped to run a monitor.
Now, I'm not a pro at these things, but I followed the installation book to a tee. And since is the second motherboard that has performed this way, I think it must me something I am doing wrong. But what can it be?
I am assuming I can hook it right in and it wil run my old hard drive like they came together. Am I wrong? Must I format the drive and run the software? I can't load rhe software fi I can't see the monitor.
When pluged in and unconnected my monitor flashes a blue and white "please check video cable connection" message. When I connect it to the MSI motherboard the flash stops. So something is working.
Any suggestions and advice will be greatly appreciated. My computer is devoted to genealogy and it's ben down for 2 months and I am very anxious to get it tuning again.
Sandy
AIM - SANDY 8771

Save this reading till the power and beeps from Wonkanoby have been resolved. I think "used" is a relative thing...
No, if you plugged everything in while power was off it is alright.
Now comes the processor part, which one it was. This motherboard can hold most, but XP3000 and XP3200.
It is getting a bit late here, so I want to prepare you for some other things that might come up:
The seating of the processor is very important. This is best done while the motherboard is out of the case.
Between the motherboard and the case there are stand-offs. Too many is a bigger problem than too few.
You might even have to test-run the motherboard out of the case, to eliminate the risk of shorts.
What memory do you have? Stick of RAM, that is. Model and speed, please.
Off topic: I didn't know either, Wonkanoby, you used a 500W in a Shuttle - half should suffice. A new one for you, maybe: Too big a PSU. But it is one overstated, again: http://www.amamax.com/pomaxceb5020.html "+3.3V-24A, +5V-36A, +12V-16A"

I have a Power PC G4 which is running on OSX 10.5.8, it has the AirPort utility but cannot connect to the internet as my iMac can, I think I might need an AirPort Card? Is that the case or do I need something different to connect to a wireless modem?

I have a Power PC G4 which is running on OSX 10.5.8, it has the AirPort utility but cannot connect to the internet as my iMac can, I think I might need an AirPort Card? Is that the case or do I need something different to connect to a wireless modem?

Welcome!
Only one variant of the PowerMac G4 could use the faster Airport Extreme Card. The rest used the original Airport card that is pretty slow.
To get fast wireless without buying more than one thing, consider this:
http://eshop.macsales.com/item/Edimax/EW7722IN/
It goes in an available PCI slot
There are USB solutions also. However, all PowerMac G4 towers had only slower USB 1.1 ports, so any USB wireless adaptor can only run at about wireless 'B" speeds (slow) unless you also install a PCI USB 2.0 adaptor card. Doing that would allow a USB wireless adaptor to run at its maximum rated speed. These items working together would accomplish that:
USB wireless "dongle:"
Newer Technology MAXPower 802.11n/g/b USB Adapter + Plug and play direct or with extension cradle
USB PCI adaptor:
http://eshop.macsales.com/Search/Search.cfm?Ntk=Primary&Ns=P_Popularity%7c1&Ne=5 000&N=7069&Ntt=USB+PCI
Each approach has its advantages. The PCI wireless card is a one-piece solution that takes up no desk space. The USB2 card+USB2 Dongle gives you more fast ports for transferring date from other external USB devices (primarily cameras and external hard drives) at hugely faster rates than can the original ports. I have a USB 2 PCI card in my G4 tower strictly for transferring images from my digital SLR camera in a timely manner.

Do I need an Airport card, too?

I have a flat panel iMac without an airport card connected to the internet via Ethernet with a 2Wire router. I have an iBook with an airport card.
So .... my iBook connects to my 2Wire network via airport, but I can't get on the Internet and even though file sharing is on on my iMac, I can't seem to access my iMac files.
Is this because I don't have an airport card in my iMac? I thought the wireless router would act as an airport card, but maybe I was wrong! If I do need an airport card for my iMac, where would I find one besides eBay?

Hi,
More things to help anybody else--what OS-X are you using, what version Flat Panel iMac, PPC or Intel, same with your iBook, my wife has a 2001 and they made them up untill recently.
You were right the first time, you won't see Airport because you don't have a card plugged in, the router is now your "Airport" card via ethernet. The computer doesn't see it so it won't bring it up. The same thing happened with my Blue Tooth. One less button to confuse me with i say.
Try looking at your TCP/IP settings on your iMac and see if their the same as your iBook. They should be identical except for the last 2 or 3 numbers at the end of the "IP Address:". Those are assigned by the router to each different computer. So depending on the router both computers should only be 1 or 2 of from each other.
You might try just making another Location and starting over and see what happens. Or if you have another Account boot into it and see if you are having the same problem.
At the very least Boot into your Startup Disk in "OS-10.xx whatever" and repair Permissions. You should boot into it before and after you update anyway.
One other thing, does your computer automatically log in or do you have to type in the passwords and network name because you might be logged into you neighbors network instead. I can go to a wireless motel or truck stop or rest area and there might be a half dozen networks showing and i can connect to half of them (no password needed) but i can't get on the internet.(password needed). Just a thought.
This is a very long shot but what the hey,
I've heard the last few updates in 10.4.x and 10.5.x have been giving every one fits so just for the heck of it, if your not using it as Admin, take a look in your "Accounts" under "Preferences" and click on" Parental Controls" and see if it defauted back. It's a shot in the dark but i've heard of odder things happening.
Good luck
Message was edited by: Jaygyver

HT4528 Does the iphone 4 have a sim card tray, and if so where is it.

Does the iphone 4 have a sim card tray, and if so where

I you have an iPhone you have it ALL!
OK I think I can help you on this one, I think there is a missconception on the terminology, if the iPhone is from AT&T it does have a SIM card tray, you will find it on the left side of the iPhone. All you need is the key insert it in the little hole and it pops out.
If the iPhone 4 is from Verizon it DOES NOT have a sim card tray.
What the sales person told your sister is accurate, the iPhone does not have a slot for an SD card which is an "storage" card mainly used to store all sorts of data such as pictures, videos and more.
Locally the iphone has lots of storage capacity so your sister wont have the necesity of ever expanding her cellphone memory for the very reason of that she has the best cellular device in the market which is an IPHONE!
I don't think she will ever fill up her iphone's memory.
Here is what I found in effort to expand the differences between the SD card and SIM card
-Secure Digital (SD) is a non-volatile memory card format developed by Panasonic, SanDisk, and Toshiba for use in portable devices to store data.
-A subscriber identity module or subscriber identification module (SIM) is an integrated circuit that securely stores the international mobile subscriber identity (IMSI) and the related key used to identify and authenticate subscribers on mobile telephony devices (such as mobile phones andcomputers).
I hope this helps your sister.

Does Camileo P30 SD camcorder support SDHC card

Hi,
I am going to buy this model. I need to know.
Does Camileo P30 SD camcorder support SDHC card?
Can I use 8GB SDHC card in this product?
Please advice.

Hi Roni,
below you can see, which kind of sd card allows how long to record movies or make pictures.
movie files:
4GB SDHC (Class6) - 1:06 h - Full HD (1080p) / 2:13 h HD (720p)
8GB SDHC (Class6) - 2:14 h - Full HD (1080p) / 4:28 h HD (720p)
16GB SDHC (Class6) - 4:27 h - Full HD (1080p) / 8:55 h HD (720p)
32GB SDHC (Class6) - 9:01 h - Full HD (1080p) / 18:03 h HD (720p)
pictures:
4GB SDHC (Class6) - 1.304 pcs. - High (8mp) / 1.778 pcs. - Standard (5mp) / 3.260 pcs. - Low quality (3mp)
8GB SDHC (Class6) - 2.620 pcs. - High (8mp) / 3.573 pcs. - Standard (5mp) / 6.550 pcs. - Low quality (3mp)
16GB SDHC (Class6) - 5.525 pcs. - High (8mp) / 7.125 pcs. - Standard (5mp) / 13.063 pcs. - Low quality (3mp)
32GB SDHC (Class6) - 10.571 pcs. - High (8mp) / 14.415 pcs. - Standard (5mp) / 26.428 pcs. - Low quality (3mp)
best regards

I need a Video Card for Adobe Premiere Elements, what is recommended?

I wish to buy the Adobe Premiere Elements Video Editing. I shoot on a Cannon GL1 & GL3 mini dvd and need a video card to capture my video footage. What Video Card is recommended for use with the Premieire Elements software? and what is the price? Please advise...

farney1946
Is the purchased Premiere Elements 12 still in its sealed packaging?
If you have not already, I would suggest that you install Premiere Elements 12 from the purchased installation disc
and evaluate its performance in your computer environment.
a. Does the program fail to install?
b. Do you get Display Card errors?
If you are worried about not being able to return 12 once the package is opened, then you can try the following
a. Download the Premiere Elements 12 tryout files from the following web site and evaluate it as a tryout (full
featured).
http://prodesigntools.com/photoshop-elements-12-direct-download-links-premiere.html
Read and carry out carefully the Note: Very Important Instructions section on the web page to avoid Access Denied message.
b. If the tryout performs well for you, then delete the tryout and install your purchased version with the purchased
serial number included on the packaging.
....other possibilities, but just the above for now.
ATR

Does a Watlow 96 need a modbus card or is it able to be directly hooked up with a RS232 cable?

Similar Messages

Maybe you are looking for