Does a X38 Diamond supports ddr2 Ram of 1066 bus
Will a MSI X38 Diamond motherboard will support ddr2 ram of 1066 bus from G.SKILL manufacturer.
and if not then is there any other MSi mother board with x38 chipset that will do
plz let me
Have a look here:
http://global.msi.com.tw/index.php?func=proddesc&prod_no=1328&maincat_no=1&cat2_no=170
Quote
Main Memory
• Supports four unbuffered DIMM of 1.5 Volt DDR3 SDRAM
• Supports up to 8GB memory size.
• Supports dual channel DDR3 memory architecture.
• Supports DDR3 800/1066/1333 memory interface.
DDR2 memory modules are not supported.
Quote
and if not then is there any other MSi mother board with x38 chipset that will do
No, however, the X48C Platinum supports DDR2 & DDR3 modules:
http://global.msi.com.tw/index.php?func=proddesc&prod_no=1393&maincat_no=1&cat2_no=170
Similar Messages
-
Does my DV7-3020sa support DDR3 RAM?
I am having cinflicting answers from the internet.
HP say that I have PC2-6400, 800-MHz, DDR2 installed and other websites say that I have DDR3 1333-MHz inside.
If I have DDR2 then can I upgrade to DDR3?
This question was solved.
View Solution.Hi,
1. Based on the following link, your machine only supports DDR2 RAM:
http://www.crucial.com/upgrade/HP+-+Compaq-memory/Pavilion+DV7+Series/Pavilion+dv7-3020sa-upgrades.h...
2, No, this will not work and you can not put in physically.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
Re: Does Satellite A200-10w supports DDR2 PC2-6400 RAM?
HI guys ,
Please i wanna to know does my [toshiba a200-10w|http://gulf.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?LNG=13&service=AE&PRODU CT_ID=127560&DISC_MODEL=1] supports DDR2 PC2-6400 RAM, because i need to upgrade my ram but all i found in the market is DDR2 PC2-6400.
I already got 1 module 2GB DDR2 PC2-5300 installed, so if i get on 2GB DDR2 PC2-6400, it will work or not?
And if it will work does the dual channel feature will work?
About the HDD what is the maximum HDD capacity i can in stall in the same model because i'll get 1TB , so this will work ?
PS : my OS is windows 7 professional ..
Thanks much guys ..
SherifHi
The notebook supports the Intel 945GM chipset.
This chipset seems to support max 533MHz.
So if you would plug 667MHz memory modules, then the system would still works at 533MHz.
The modules are DDR2 so I dont see any reasons why the dual channel should not work in your case.
>About the HDD what is the maximum HDD capacity i can in stall in the same model because i'll get 1TB , so this will work ?
Notebook supports SATA interface. The SATA controller has not limitation to the HDD size so theoretically you should be able to use such big HDD but to be honest; I never used such big HDD. The biggest one which I used in by notebook was 500GB and this was big enough.
However, you will need to test it to b e100% sure.
Greets -
Does Satellite A200-1M8 support 800Mhz RAM?
Hello everyone!
Does my Toshiba A200-1m8 support DDR2 800Mhz RAM?
thx from advance!The machine has a frontsidebus of 800Mhz, but it only supports DDR2-667 RAM.
So, you wont have a benfit when you install faster modules.
Sorry mate
Nice weekend -
Does early '11 MBPs support 16GB ram?
I have an early 2011 13-inch MacBook Pro. I was just wondring if it will support 16GB RAM? The apple website says it can only support up to 8GB but I read elsewhere that it is able to support 16GB.
Specs:
CPU: 2.3 GHz Intel Core i5
RAM: 4GB 1333MHz DDR3
DATE OF RELEASE: Early 2011, 13-inch MacBook ProMine does.
Crucial.com and macsales.com (OWC) sell RAM that is tested to be compatible with MAC and will guide you to the proper RAM. I am running crucial 16 Gb now. -
Does HP P6820 desktop support 8GB ram
I have HP P6820 sesktop with 2x2 Gb of ram now my son asking for more ram just wondering will it support 2 x4 gb ram
TaanksDHuang, welcome to the forum.
No, it only support up to 4 GB with a 64-bit OS:
Supports DDR3 DIMMs only
Dual channel memory architecture
Two DDR3 DIMM (240-pin) sockets
DIMM types:
PC3-10600 (DDR3-1333)
PC3-8500 (DDR3-1066)
PC3-6400 (DDR3-800)
Non-ECC memory only, unbuffered
Supports 2 GB DDR3 DIMMs
Supports up to 4 GB on 64-bit PCs
Maximum memory only if using 2GB DDR3 DIMM modules
note:32-bit PCs cannot address a full 4.0 GB of memory
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee. -
Does Satellite C850-B519 support 1866MHZ RAM?
I have Satellite C850-B519 and i'm asking if " Kingston predator DDR3 1866MHz CL10 Intel XMP DIMM" is compatible with my device or not?
Hi
According notebook specification your notebook works with DDR3 RAM (1.600 MHz) modules.
Compatible modules are:
4GB DDR3-1600 - PA5037U-1M4G
8GB DDR3-1600 - PA5037U-1M8G
I have checked Kingston page and was not able to find your notebook model there. -
Does the Neo2 support DDR2 4200 533MHz Ram?
Not holding my breath but does the Neo 2 Platinum NF3 support DDR2 4200 533MHz Dual Channel Geil ram? (2x1gig).
It only saysd DDr400 in the manual so I'm assuming it won't run it? (Its a matched pair as well I'm looking at buying).
Any help welcome:)Quote from: DaveR on 23-February-06, 19:11:19
Your motherboard does not support ddr2 memory which uses a different socket.
Agreed. In addition: none of the current Athlon 64 CPUs is actually supporting DDR2 (memory controller is built in CPU, remember?). You will have to wait for the new CPUs (socket AM2) which will be available in June 2006. -
Does my all-in-one support more ram
My questions are:
1.Does it support more ram
2.what type of ram(laptop, Desktop, Other)
3.Is my ram ddr3 or ddr2 idkIf you model is this unit, read on.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus -
Does the P6N SLI-FI support this ram?
OCZ2P8002GK is the model ram that i have. I really like th board but need to know if it will support my ram.
Thanks
DLMWelcome dlmx,
I do not have OCZ RAM, however MSI says this board-
"Supports dual channel DDR2 533/667/800, using four 240-pin/1.8V DDR2 DIMMs."
1.8v being the critical factor, though it seems from this and other forums that OCZ
has had a run of bad karma.
Anyway the most extensive reference is probably the test report(s) on this board and ram,
located here:
"http://www.msi.com.tw/html/products/mainboard/testreport_pdf/7350/memory.pdf"
The manual contains the QVL. It is a short one page, no OCZ. For that matter, I do not recall seeing OCZ in the test report either, though I could be wrong. The list may have been updated as well. Download it and check. The manual is also freely available for download.
So far I'm liking my board, but you can see I'm using Patriot PC-6400LLK (saw a review on this board that used it, kinda like a word-o-mouth recommendation). -
MSI K8T Neo - does it support ddr2 modules?
MSI K8T Neo - does it support ddr2 modules?
Quote from: Zoolisha on 03-July-07, 06:05:07
tnx :(
its a CPU problem not a mobo. don't be disappointed from the board. if the CPU can work with DDR2 the board will have those DIMM slots.
i mean if you got board with DDR2 memory support and also have DDR2 memory sticks, you have to change CPU as well. -
X38 Diamond and P45 Diamond; endless reboots before POST
Hi,
I'm experiencing the same problems with two MSI-boards now, and I have had the same problem with a another MSI P35-based board earlier (belive it was a P35 Premium with a C2Q Q6600 - I replaced the board and the config worked fine with a Gigabyte P35-board).
These system don't share any components.
For the P45 Diamond I use a C2Q Q9300, 4 GB of Crucial PC6400 DDR2, Asus GeForce 8600GTS and WD 250 GB SATA HDD. I was able to build the system, install the software and use it for about a week before the trouble starts. When I power the system, fans starts spinning, before it restarts it self over and over again.
On this system I have tried to change the PSU from a Antec 500W to a Corsair 450W, without any difference...
The X38 Diamond system runs with a C2D E4200, 4 GB of Corsair XMS3-1800, GeForce 7800GTX, 250 GB WD SATA HD and a 900W Fortron Source Epsilon PSU. The problem is the same: I was able to get the system up running, install Windows and drivers, and after a few days the problems start. I turn on the system, and after a few seconds it turn itself off, then on, then off and so it goes.
Other than being in the same room, and buildt by me, these systems don't have anything in common. I have used different power-sockets also, on seperate circuits, and that itself should not be a problem.
Tried resetting CMOS on the boards, disconnecting HDD and other stuff that ain't really needed to POST... As I said. At first these systems worked fine, but after a few days of use, problems started. The P45 Diamond-system was buildt some months ago and they put away because of the problems, and now the similar problems with the X38-based setup...Quote
For the P45 Diamond I use a C2Q Q9300, 4 GB of Crucial PC6400 DDR2, Asus GeForce 8600GTS and WD 250 GB SATA HDD.
The P45 Diamond does not support DDR2 memory modules. Can you please verify the info you gave? Also, what is the onboard BIOS Version?
Quote
The X38 Diamond system runs with a C2D E4200, 4 GB of Corsair XMS3-1800, GeForce 7800GTX, 250 GB WD SATA HD and a 900W Fortron Source Epsilon PSU. The problem is the same: I was able to get the system up running, install Windows and drivers, and after a few days the problems start. I turn on the system, and after a few seconds it turn itself off, then on, then off and so it goes.
Please clear CMOS with main A/C power cable removed from PSU, remove all memory modules but one and try to start the system again. Please post a link to the Corsair Datasheet of those memory modules. And also, the onboad BIOS Version would be interesting to know. -
N1996MS-7222 VER: 2 ONLY READS 50% OF DDR2 RAM INSTALLED
MOTHER BOARD IS = N1996MS-7222 VER: 2
RAM = 4GIGS DDR2
PROCESSOR = DUAL CORE 2.66 GIG
OS = 32 BIT WIN XP PRO / SERVICE PACK 2
THE PROBLEM IS THE COMPUTER IS ONLY READING THAT I HAVE 2 GIGS INSTALLED, YET WHEN I USE AIDA32 IS SHOWS I HAVE 4 GIGS ,, HOW CAN I ACCESS THE LOST 2 GIGS OF RAM ?
SECOND ISSUE I HAVE A 24 BIT SOUND BLASTER LIVE CARD INSTALLED , AND IT WORKS GREAT WITH MY 100 MEMBER VENTRILO, AND WITH MY BHD VIDEO GAME. THE VENT SOUNDS REMAIN CLEAR, BUT THE GAME SOUND SUDDENLY BECOME SILENT, IF I EXIT THE GAME THE RE-ENTER THE GAME SOUNDS RETURN , ANY SUGGESTIONS ?
i HAVE UNINSTALLED THE GAME AND REINSTALLED THE GAME , AND THE SAME ISSUE, SO I BOUGHT A NEW COPY OF BLACK HAWK DOWN, AND IT STILL DOES THE SAME THING ! THANKS FOR ANY AND ALL SUGGESTIONS !Hi,
Quote
MOTHER BOARD IS = N1996MS-7222 VER: 2
That would be this board:
http://global.msi.eu/index.php?func=proddesc&maincat_no=1&prod_no=1039#
Quote
Main Memory
• Supports two unbuffered DIMM of 1.8 Volt DDR2 SDRAM
• Supports up to 2GB memory size.
• Supports DDR2 533/400 memory interface.
If I am not mistaken, the VIA P4M800 Pro Chipset used on this board is actually capable of addressing up to 4GB of system memory (minus reserved address areas of course). As it says 2GB max. on all the product sites I checked, I suppose the 2GB limit is not a misprint on the sites but rather a board limitation. -
My PC name is COMPAQ SG3350IL
i have 2 DDR2 RAM slots in which i can install total 4 GB RAM.
I will install windows8.1 on my PC very soon, for that do i have to upgrade my video BIOS also with RAM( as above)?
All this i am asking is for installing blue stakes and similar softwares in order to run android applications on windiows
8.1 which i will install very soon.
justnow i have windows XP proffessional installed on my pc which i will upgrade to windows 8.1 within a week.
My present hardisk is 160GB
The details of my Video BIOS installed on my PC is as under -
Chip Type - Intel (R)82945G Express Chipset family
DAC Type - Internal
Memory Size - 128 MB
Adapter String - Intel (R) 82945G Express Chipset Family
Bios Information - Intel video BIOS
Intel(R) Graphics Media Accelerator Driver Report
Report Date: 01/23/2014
Report Time[hr:mm:ss]: 21:07:40
Driver Version: 6.14.10.4926
Operating System: Windows XP* Professional, Service
Pack 2 (5.1.2600)
Default Language: English
DirectX* Version: 9.0
Physical Memory: 1015 MB
Minimum Graphics Memory: 8 MB
Maximum Graphics Memory: 128 MB
Graphics Memory in Use: 9 MB
Processor: x86 family 6 Model 15 Stepping 13
Processor Speed: 2400 MHZ
Vendor ID: 8086
Device ID: 2772
Device Revision: 02
* Accelerator Information *
Accelerator in Use: Intel(R) 82945G Express Chipset
Family
Video BIOS: 1295
Current Graphics Mode: 1024 by 768 True Color (75 Hz)
* Devices Connected to the Graphics Accelerator *
Active Monitors: 1
* Monitor *
Monitor Name:
Display Type: Analog
Gamma Value: 2.20
DDC2 Protocol: Supported
Maximum Image Size: Horizontal: 14.0 inches
Vertical: 9.0 inches
Monitor Supported Modes:
640 by 480 (60 Hz)
640 by 480 (75 Hz)
720 by 400 (70 Hz)
800 by 600 (60 Hz)
800 by 600 (75 Hz)
832 by 624 (75 Hz)
1024 by 768 (60 Hz)
1024 by 768 (75 Hz)
1152 by 870 (75 Hz)
1280 by 960 (60 Hz)
1280 by 1024 (60 Hz)
1280 by 1024 (75 Hz)
1440 by 900 (60 Hz)
1440 by 1440 (60 Hz)
Display Power Management Support:
Standby Mode: Not Supported
Suspend Mode: Not Supported
Active Off Mode: Supported
* Other names and brands are the property of their respective
owners.
So please reply me as soon as possible.Hi harrrrrsh,
Here is a helpful guide on upgrading to Win 8.1. Your system hardware seems to meet the minimum requirements.
Expand "Can my PC run Windows 8.1?" and navigate to the Win 8 Upgrade Assistant. Select run or save the Win 8 Upgrade Assistant to your desktop. Then run the upgrade assistant from the desktop for a detailed analysis of your PC and the steps needed to complete the upgrade.
Upgrading from XP to Win 8.1 is a big move and you may have device driver problems. You may also have some issues migrating third party legacy software to the Win 8.1 installation.
I have upgraded Win XP PC's to Win 7 with very few issues but have not moved an XP PC to Win 8.1.
Jaco
****I am not an HP employee****
Please give a" Kudos" if advice received is relevant or" Accept as Solution" if your problem has been solved.
+++++++++++++++++++++++++++++++++++++++++++++++++++++
H8 1380t CTO, Intel i7 3820
16 GB DDR3
Pegatron Motherboard- IPIWB-PB (Pittsburgh), Radeon HD 7570 1GB. Win 7 Home Premium upgraded to Windows 8.1 Pro.
Envy Phoenix 810-150se, Intel i7 4820k
16 GB DDR3
Pittsburgh2 Mainboard, NVIDIA GTX 645- 2GB GDDR5. Win 8.1 Pro.
HP 560z CTO AMD Phenom II X6 1090T
16 GB DDR3.
Radeon HD 6570
Win 7 Home Premium upgraded to Win 7 Pro.
HP ENVY 17t-j000 CTO Quad Edition Notebook. I7 4702mq
12 GB DDR3
Nvidia Graphics
Win 8 Pro
Errare humanum est. -
Does HP G7-1368DX support SATA III ?
Does HP G7-1368DX support SATA III ?
This question was solved.
View Solution.Please see the "HP Pavilion g7 Notebook PC Maintenance and Service Guide" for the technical specification of your computer. It appears that the computer supports SATA, but no exact information is given. The is most likely SATA version based on an AMD A60M chipset would be SATA3.
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240
Maybe you are looking for
-
Watching movies from Netflix app on your tv from iPhone 5
I was wondering, since at the moment I'm without cable tv and internet because of a dispute with my local cable provider, is there a way I can 'mirror' or whatever movies from the netflix app to my tv? I don't have any special cables for my iPhone bu
-
Verity - files and db query combo
Is it possible to have both a search of some files and a query of a database table in the same cfcollection? If so, guidance on how to do this?
-
Why this movie wont stop playing?
Hi there , Im really needing some help with my flash file here, i have been following tutorial on how to make this animated gallery http://www.flash-game-design.com/flash-tutorials/gallery-flash-tutorial.html) and i seem to be going fine with it, but
-
Untread Text Frames without losing text in the second frame
I probably not gonna use the right terms to express my question because I don't have an english version of ID. I'm sorry for that. If you, for example, import a text document into your column-based layout, you are able to automate the text flow and i
-
HP Server 2008 R2 keeps restarting
Ok, so I have a HP Server in my office and this morning, I had to restart and afterwards, it wont load again. Its odd because it shows the BIOS screen, and when it starts loading to ask me for password, it just restarts again and then tells me Window