Does Access key required to implement explicit Enhancement point

Hi All,
Does Access key required to implement explicit Enhancement point in Function module or source code or etc.
please clarify..
thanks
Bhanu

Thanks for your reply Mr. Bala..
I think i have not asked question correctly.. what i mean to ask is "to create the explicit enhancement point in the method(Source code), does ACCESS KEY required".
Because when i tried to create enhancement point at IMPLICIT enhancement option system is allowing to create but when i tried to create at other than IMPLICIT enhancement option(in the mid of source code ) system is not allowed and displayed following message :
"In this mode, you can create implementations only"
waiting for your reply..
Thanks
Bhanu

Similar Messages

Change Extract structure -- Access key required ?

Hi guys,
I wanted to change the extract structure for one LO extractor. Just add one field from the available pool of fields. Is access key required for this ?
Thanks,
BWer

You can't directly change the extraction structure without an Access Key, nor would you want to. Instead, go to SE11 and pull up the extraction structure you want to modify, in update mode, and then click on the Append Structure... button. You can add the columns of data that you wish to have on the DataSource there. After re-activating the structure, you should then be able to see the columns that you added in the maintenance view for the DataSource, pull them over, re-generate the DataSource and create the code in CMOD to populate these columns.

Difference between implicit and explicit enhancement points

Hi Folks,
I had learned many documents to findout the difference between explicit and implicit enhancement point.I got the theoritical knowledge on that but losing on the practical side..
Can anybody help me out with one real time scenario where the explicit enhancement points have been implemented and the step by step procedure to implement it..
Hoping for the positive response from you..
Regards,
Rohan.

Hi Rohan,
In implicit they are available at the beginning of subroutines defined in the standard reports.
Edit-> Enhancement operations->show implicit enhancement options.
This will highlight all the implicit enhancements in the report.
In Explicit enhancement we have two different types of enhancements -
Enhancement point and Enhancement section.
Enhancement point - SAP has some standard functionality defined for a report , but it may be required that you'll need to add your own code. In this case the code that you'll add will be executed along with the standard code.
Enhancement section - SAP has its standard functionality defines but it may not suit your requirement, in that case you may need to add your code and you'll need that code to be executed only. By this method the existing code is automatically commented and a copy of the same code is available to edit.
After executing the report only your code will be executed and the standard code will be bypassed.
For Practicle implementation, follow this link.
Link : [http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bb54c452-0801-0010-0e84-a653307fc6fc]
i hope it will give you some clear picture....
Thanks.
Anurag

CAF Designer Access Key required

Hi,
I have download and setup Netweaver Sneak Preview. But when I try to create a project in NWDS it asks for an Access Key.
Please let me know where can I get the Access key from ?
I am using NWDS 2.0.15.
Thanks
Mz

Hi Alex,
I am not sure about
1. which version of NWDS are you using.
2. what type of develop component (DC) based project are you trying to create.
Still please check if /thread/145824 [original link is broken] [original link is broken] for some great tutorials.
Regards
Nilay

How to implement implicit and explicit enhancement points

Hi,
Can anybody please provide some technical aspects of enhancement spots. I have gone through several sap sites and help poratl but have not get much technical things (how to implement or related t codes). please do not provide link to read theories.
Rgds
sudhanshu

Hi,
Refer to this link...
http://help.sap.com/saphelp_nw2004s/helpdata/en/5f/103a4280da9923e10000000a155106/content.htm

Adding custom fields to VA01 additional data tab without access key

I have to add custom fields at item level in transaction VA01/VA02.
Is access key required to add fields to additional data screen i.e 8459 ?
Is there any way to do this without using access key ?

Hi ,
Try for any User Exit or BADI available for the tcodes.
Here are exits for VA01 and VA02.
Exit Name           Description
SDTRM001            Reschedule schedule lines without a new ATP check
V45A0001            Determine alternative materials for product selection
V45A0002            Predefine sold-to party in sales document
V45A0003            Collector for customer function modulpool MV45A
V45A0004            Copy packing proposal
V45E0001            Update the purchase order from the sales order
V45E0002            Data transfer in procurement elements (PRreq., assembly)
V45L0001            SD component supplier processing (customer enhancements)
V45P0001            SD customer function for cross-company code sales
V45S0001            Update sales document from configuration
V45S0003            MRP-relevance for incomplete configuration
V45S0004            Effectivity type in sales order
V45W0001            SD Service Management: Forward Contract Data to Item
V46H0001            SD Customer functions for resource-related billing
V60F0001            SD Billing plan (customer enhancement) diff. to billing plan
Regards,
Lakshman.

Implicit and Explicit Enhancement

Hi Gurus ,
Can anyone please let me know about what is implicit enhancement and explicit enhancement.Steps involved in the same .
Thanks ...
ashok...

Hi
Implicit enhancement points are basically points within ABAP code where an enhancement point is implied, and in which case can be created. Examples of implicit enhancement points are at the beginning and end of FORMs, at the end of a program, include or function module etc. Below is a step by step demonstration of how to create and implicit enhancement point.
Explicit enhancement points are basically hooks already coded into the program by SAP at various points of the code. See program RIAUFMVK for examples of these! These are very easy to implement simply go into enhancement mode of SE80 and right click on the enhancement point where you want to add your code and choose Enhancement Implementation->Create Give it a name, description and assign it to a change request (should not be a Z package) and then simply add the code as normal
check the help
http://help.sap.com/saphelp_nw70/helpdata/en/94/9cdc40132a8531e10000000a1550b0/frameset.htm
Regards
anji

Is SAP Access Key same for edit of PCBURZ990??

Dear Experts,
I am new to payrol custome function (i.e pe04),after reading materials from this site,i started to develop payrol function but when i try to edit PCBURZ990 program in se38,i got access key required message and i entered same key which i got for abap development,but it is not accepting that key.
So i want to know,is it possible abap developement and PCBURZ990 have differenet access key..
Thanks & Regards
Anwar

Hi,
Getting Access key for objects is usually the job of the Basis consultant/Project Admin.
so contact them with the object name and the system installation number, they will get it for you.
Regards
Karthik D

Enhancement Point Creation in Internal table

Hi,
I want to create a Enhancement Point in Internal table declared in Customize Program.
This is more related to clarification of concept related to Enhancment Point.
But when i am putting the cursor inside the internal table and right click and Enhancment -> create ,it is giving me a message
that "Position of enhancement section/point statement is not allowed".
This means that we can't create Enhancement point or Enhancement Section inside the Internal table and solution is we can use
only Implicit Enhancement point.
But the doubt is that i had seen SAP programs where they have created the Enhancement point in the internal table declarations.
How that is possible then?
Please provide your helpful answers to get me more clarification on Enhancement Point/
Thanks,
Manish

Hi Afzal,
Below is the code from standard program :-
DATA: BEGIN OF lbbes OCCURS 10,        "Tabelle für LB-Bestände
        lifnr LIKE ekko-lifnr,
        matnr LIKE mdpm-matnr,
        werks LIKE mdpm-werks,
        charg LIKE lifbe-charg,        " SC-batch: Key-Feld
        lgort LIKE resb-lgort,         " SC-batch
        lbmng LIKE lifbe-lblab,        "LB-Bestandsmenge
        erfmg LIKE mdpm-bdmng,         "Verfügbare Menge
        erfme LIKE mdpm-lagme,         "Basismengeneinheit
        wamng LIKE mdpm-bdmng,
        waame LIKE mdpm-lagme,
        vstel LIKE tvstz-vstel,
        ladgr LIKE marc-ladgr,
        sernp LIKE marc-sernp,
        lblfa LIKE t161v-lblfa,
        bdmng LIKE mdpm-bdmng,   "sum of dep. requirements from SC POs
        bdbam LIKE mdpm-bdmng,   "sum of dep. requirements from SC req's
        rsmng LIKE mdpm-bdmng,         "sum of transfer reservations
        slbbm LIKE mdpm-bdmng,   "sum of third-party SC requisitions
        slbmg LIKE mdpm-bdmng,         "sum of third-party SC POs
        lfimg LIKE komdlgn-lfimg,      "sum of open deliveries
        maktx LIKE mdpm-maktx,
        selkz LIKE sy-calld.
ENHANCEMENT-POINT rm06ellb_03 SPOTS es_rm06ellb STATIC.
$$-Start: RM06ELLB_03----
$$
ENHANCEMENT 3 /CWM/APPL_MM_RM06ELLB.    "active version
DATA:   /cwm/waame LIKE mdpm-lagme,
        /cwm/lbmng LIKE lifbe-lblab,    "LB-Bestandsmenge in ParallelME
        /cwm/erfmg LIKE mdpm-bdmng,     "Verfügbare Menge in ParallelME
        /cwm/erfme LIKE mdpm-lagme,     "ParallelME
        /cwm/meins LIKE mdpm-lagme,     "CW-BasisME
        /cwm/bdmng LIKE mdpm-bdmng,     "sum of dep.req.< SC POs in PME
        /cwm/lfimg LIKE komdlgn-lfimg, "sum of open deliveries in PME
        /cwm/rsmng LIKE mdpm-bdmng,     "sum of transfer reservations
        /cwm/slbbm LIKE mdpm-bdmng, "sum of third-party SC requisitions
        /cwm/slbmg LIKE mdpm-bdmng,     "sum of third-party SC POs
        /cwm/bdbam LIKE mdpm-bdmng. "sum of dep. req´s from SC req's
ENDENHANCEMENT.
$$-End:   RM06ELLB_03----
$$
DATA:
      END OF lbbes.
Now in the internal table lbbes they have created the enhancement point and in implementation of enhancement point they have declare some extra fields.This is not a implicit enhancement but it is a explicit enhancment implementation with the help of enhancement point.
Similarly if i have to do in my customize program then how to go ahead?
I knew that it is possible with Implicit Enhancement point and i can implement that also.
Let me know your views about this.
Thanks,
Manish

Enhancement points in ECC6.0

Hi Friends,
can anyone please share the documents related to enhancement points (spots) in ECC 6.0?
Regards,
Ravi.

Enhancement points - Changing standard SAP code using the implict and explicit enhamcement points
Enhancement points are basically hooks at certain defined points within the ABAP code i.e. at the beginning and end of a FORM. These hooks allow you to attach your own custom code which will be executed as if it had been hard coded into the code using a modification. Unlike hard coded modifications these will not be lost during upgrade or patching exercises.
There are 2 types of enhancements with the enhancement framework:
1. Explicit enhancement points: These are basically hooks already coded into the program by SAP at various points of the code. See program RIAUFMVK for examples of these! These are very easy to implement simply go into enhancement mode of SE80 and right click on the enhancement point where you want to add your code and choose u2018Enhancement Implementation->Createu2019 Give it a name, description and assign it to a change request (should not be a Z package) and then simply add the code as normal.
2. Implicit enhancement points: These are basically points within ABAP code where an enhancement point is implied, and in which case can be created. Examples of implicit enhancement points are at the beginning and end of FORMu2019s, at the end of a program, include or function module etc. Click here for demonstration of how to implement an implicit enhancement point!
Search for enhancement in sdn you will get demo also.

Use of Enhancement-point

Moderator message: do not post the same question twice in different forums. Your duplicate has been deleted.
Hi
I hv used enhancement point in my standard transections like MIRO,FBRA,FB08,FCH5 and some other
i have implemented implicit enhancement point to above transactions and all are working fine and as per the requirement
i m concern with only few things that :
    1-   Is it good to use enhancement point or to use user exit and badi ?
    2-   After using enhancement point as a in between hooks i m not violating and modifying the standard no ?
   3-   If someone raise an OSS message for some queries in related transaction will SAP gives support ?
Please help me onthis
Regards
rajan
Edited by: Matt on Dec 17, 2008 10:00 AM

Hi,
Make a habit of searching on SCN, you will get lot of threads for all your queries.
And adhere to rhe rules of engagement by not posting multiple questions in a single thread.

Query for enhancement point.

how to use enhancement point in report?give me one example for this? give proper ans

Hi Friend,
We can use enhancement point to enhance standard report for customize requirement of our client.
You can create enhancement point in display mode. There is button called Enhance (shift + F4). Click on that and it will ve in change like mode; now you can implement any enhancement point.
To go to display mode press chnage/display button.
Hope it will help you.
Regards
Krishnendu

Creating an enhancement point

hello
i have to add some codes in enhancement ENHANCEMENT-POINT ZUORDNUNG_DURCHFUEHREN_01 SPOTS ES_SAPLMR1M.
what im not sure is whether im doing it in the right way coz its the first time im doing that
i right click on the ENHANCEMENT-POINT ZUORDNUNG_DURCHFUEHREN_01 SPOTS ES_SAPLMR1M.
where i can create the enhancement or is there another way coz i was following a tutorial, im not getting the same screens
plz confirm

hi sia anjali,
The better way to start with a Enhancement is;
1) Go to SE18
2) Give Enhancement Spots and click Display.
3) Scroll the list for your Enhancement Point (ZUORDNUNG_DURCHFUEHREN_01) and Double click on it.
4) Now The code will be opened in ABAP Editor.
5) Before modifying switch to "enhancement mode" by pressing the "Enhance Sourcecode" Button( Shift + F4).
6) Now Right Click -> Enhancement Implementation -> Create
7) Click on the Create icon and Give Name and description
8) Assign Package
9) Now select the newly created Enhan. implementation and press enter.
10) Now start writing code as usual.
Regards
Karthik D

Sap support for standard prog. w/ custom implem of implicit enhanc.points

Hello,
since 1 year I've been confronted to SAP customers which WIDELY implement Implicit Enhancement Points (IEP).
I have been really surprised that my customers undoubtly think, if a problem occurs in a standard program where there are lots of IEP custom implementations, and if my customers estimate after investigation the problem comes from the standard part and not from the IEPs, they think that SAP support would help them to solve the issue.
Note: as a consequence, they created much more IEP in ECC 6 than they did in the past with R/3 old releases (via changes of the standard, aka repairs)!
What I think, is that SAP SUPPORT WOULDN'T HELP them as long as there is custom code (even within IEPs) in the standard program, even if there is only one IEP with one line (because it could change completely the standard algorithm, for example by emptying a global internal table)
So, I think the only way to get help from SAP is to deactivate these IEP implementations before requesting support. And so, the only solution to deactivate them, customers MUST assign IEP implementations to a package and then to a switch and then to a business function, so that they can deactivate it via switch framework.
The main concern is that my customers didn't create switch/business function, so they cannot react quickly if a problem happens in production : reproduce in test system, deactivate custom IEPs by switching off business function (it's what they didn't do), reproduce with full standard to determine problem comes from standard, request help from sap).
Could you share with me what is your approach about implementing IEPs, and maybe, is there somewhere a SAP documentation which explains that officially?
I hope I was clear.
Thank you very much for your kind help.
Best regards,
sandra rossi

I played around a bit with this (as I had never done it before) and also from what I have read, the intended option is the switch framework.
I guess as plan B you could have a virtual system or reliable test environment in which you can disable the enhancement and bring it back again via version management - but from what you have described (IEP deleting gobal variables, etc) this would also remove the "bug" and make the problem difficult to reproduce.
Perhaps the next best thing (unless someone has a better idea) is to inform your customers about neatly organizing their software developments using packages and switches.
To my knowledge, the syntax checks are also getting stricter in this area (as you may have noticed) and I hope that (for some of them) will throw errors one day during the development stage already.
Sorry, that does not help you much (but at least you read "the rules"
Cheers,
Julius
ps: A dirty way of doing it would be to run the program in the new debugger, and skip over the enhancement using the Go-To function. Unlike the classic debugger, the code inbetween does not need to be debugged. Ugly, but effective...
Edited by: Julius Bussche on Nov 10, 2008 9:13 PM

Does InDesign CS6 require internet access for volume license validation

Our purchasing team supplied me with a volume licnsed version of InDesign CS6 and it requires internet access to validate the license.We operate in a VDI environment without internet access.
If i try to use the AdobeApplicationManagerEnterpriseEdition tool to customize the app it will not recognise the serial key..? if i manually launch the Setup.exe it does..?
Thanks
gary

Yes , the internet access is required to use the Adobe software but we do understand in secure enviornment it is not possible.
Hence , you can create a deployment package using AAMEE on a internet enabled computer and then use the package to install the cs6 software on the computer without internet computer.
Make sure you use AAMEE 3.0 as it will only work with CS6.

Does Access key required to implement explicit Enhancement point

Similar Messages

Maybe you are looking for