Does access manager only support uid as rdn?

I am deploying 2005q4 access manager and my directory does not use uid as the rdn for user entries. Does access manager only support uid as the rdn in user entries? I am trying to test JES with mail and calendar etc and trying to figure out how to use my data design.

no, it can support any attribute for the naming attribute. For LDAP authentication there are usually two directories involved: the LDAP server where authentication occurs and the LDAP server where user profiles are stored.
If you only need to authenticate against an LDAP server where the RDN is not uid (for AD is samaccountname), you simply need to change the naming attribute in the LDAP authentication module
if you the LDAP server where user profiles is stored does not use UID, you may have a little more work on your hands. If you are using AM 7 in realm mode you simply need to create a new LDAPv3 user store configured for your needs. If you are using AM 7 in legacy mode or < AM 7 you will need to modify the DAI service and quite possibly the amUser and amConsole services.

Similar Messages

Does "Access Enforcer" only support "role" based SOD analyse?

Hi Expert,
In the demo script, when the user create the "Access Request Form", he can choose the "Role" he wanted from "Select roles" list, I'm just wondering whether each role here is corresponding to the role in the backend system? for example,
If I choose role "Z_AP_ACCOUNTANT" actualy at that time there is a role called "Z_AP_ACCOUNTANT" already in the backend system if the system is a SAP ECC system.
Another question is, if so, does that mean it can only support "Role" based SOD analyse? as you know, each role may contain several "authorization objects", can it be done from "authorization object" level?
Thanks and best regards.

Hi,
The Roles are normally determined based on the SOD.Using T/code:PFCG the roles are mapped to the system.These Roles are common to all the system,regardless of R3,Virsa etc.
The roles also can be determined without SOD [but this is not recommended.].
The SOD is only to ensure that there exist no internal control weaknesses while creating the Roles at an organizational level.Thus it is only an excercise outside the System,be it SAP,Virsa or else.
At the system level we map only the roles [ using :PFCG].We dont map SOD here.So,SOD or No SOD,the system supports the Roles.
Hope this helps.
Regards,
Ramesh.

Does Siebel Management Server supports multiple gtwy servers/siebelservers?

Hello,
Does Siebel Management Server supports multiple gtwy servers and siebel servers when running getservers.pl ?
Does Siebel Management Agent service run under windows 2008 OS?
Cheers
Kota

Hi,
In addition to making sure Agent Proxy on all AD FS servers is enabled, please also verify that the IIS 6 Management Compatibility and
IIS 6 Metabase Compatibility role services are installed. (Some AD FS 2.0 scripts depend on Internet Information Services (IIS) Windows Management Instrumentation (WMI) objects being installed.)
Here are two links for your reference:
Discovery Does Not Work in ADFS 2012 R2 MP
http://blogs.technet.com/b/omx/archive/2014/05/07/discovery-does-not-work-in-adfs-2012-r2-mp.aspx
http://scug.be/christopher/2012/03/07/opsmgr-scom-adfs-2-0-mp-discovery-issue/
Regards,
Yan Li
Regards, Yan Li

Does Intelligent Management Center Support UPS's?

My IT department is getting Intelligent Management Center to replace some monitoring in SolarWinds. I want to know if Intelligent Management Center supports UPS's and what brands?

[email protected] wrote:Hello everyone! I am curious what everyone does in their standard client accessswitch closet, do you have UPS's in every closet or do you have nice surge suppressors to protect your client access switches? Sent from Cisco Technical Support iPad App
How big is your network, and how much money do you have to spend?
I've most recently been working on data-center sized networks, and they tend to be covered by large, center-wide UPS's with generator backup - the UPS and associated rectifiers isolate the protected kit from any chance of surges, so they're not needed on a rack-by-rack basis.
That's not a viable option for a smaller network or client base, so you sometimes need to think outside the box - one place I'm working on has two racks, one large UPS in the bottom of one rack and a PDU for each rack running the essential hardware (switches, servers, not monitors or non essential stuff) running off the one UPS.
There's no one size fits all solution - if you have widely distributed network closets/racks and don't want to put a UPS in each rack, your best bet might be getting switches with redundant power supplies and ensuring each supply runs off a separate electrical phase - since a lot of power outages only affect one phase at a time, you can often survive brief otuages on the secondary supply until the primary is restored.
Cheers

Does ADF now only support Chrome 1?

from http://www.oracle.com/technetwork/developer-tools/jdev/index-091111.html#Browsers, I found ADF only support Chrome 1.
Since newest Chrome version is 17, Why ADF just support Chrome 1?

See, the problem is that as the time of writing the current chrome version 18... They come out too fast to put them all into such a document.
The doc you state says Chrome 1+, which I read as chrome version 1 and newer.
By the way, you should update your Chrome to 18
Timo

Why does Startup Manager only show Recovery HD and not my other drives like Macintosh HD and my USB drive?

I'm not really sure what happened to my Mac but when I start it, it only shows Recovery HD and nothing else. I tried re-installing Mountain Lion through my Apple ID but it states that I have not purchased it and will not let me proceed. I have bought a usb drive that has Mountain Lion, since I cannot purchase it in the apple store, on it to install it from there but I cannot boot into my USB because it only shows "Recovery HD" in Startup Manager. I would really appreciate some input from you all, thank you for your time in advance.

Either your drive is failing or has been corrupted. Please try the following. You cannot do the following unless you have purchased Lion or later. From your post that's not clear. Without knowing your exact model I cannot tell you what to do.
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Lion, Mountain Lion, or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.
If your computer is a 2010 or earlier model, then you should be able to do the following:
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

HT3621 Does iPad bluetooth only support (connect) to Apple products?

I have been trying to connect my LG cell phones to my iPad2 and it keeps telling me it (iPad) does not support this device. I assume it will only connect to "i" products. Am I correct.

Not quite. It will connect to non Apple devices...but only keyboards, microphones and headsets. there is no protocol for file transfer or streaming between devices.

Why does application manager only shows me CS6 version of the apps? How do install the CC versions?

Everything in the Adobe site leads me to believe that the CC versions of the aplications are the current versions, however, when I open application manager, I only see the CS6 versions. Do I have to uninstall something and then reinstal? What do I do to install the CC versions?

The Creative Cloud versions will not be available until June 17th. Please see the following related discussions.
http://forums.adobe.com/message/5361832#5361832
http://forums.adobe.com/message/5374914#5374914
http://forums.adobe.com/message/5381796#5381796
You can also find more details in our Creative Cloud FAQ at http://www.adobe.com/products/creativecloud/faq.html.

Skype Manager only supports adding new business ac...

From the help doc on skype, it seems like there are two options for adding accounts to your skype manager: 1) creating entirely fresh business accounts and assigning those to your employees, and 2) inviting your employees' existing skype accounts to your skype manager.
For the life of me I cannot figure out where in the interface to do option 2. This is the one I really want.
Can anyone help me??? Screencap, or verbal descirption, or an explanation that it has been removed? I am at a loss.
Thanks in advance,
-katie

If you are located in the U.S. you cannot add normal non-business created Skype names to the Skype Manager.
More here: https://support.skype.com/en-us/faq/FA10522/How-do-I-invite-members-with-personal-Skype-accounts-to-...
About Me You can also use a IP Camera as your camera for Skype video Example Instructions

Does Config manager 2013 supports windows xp unlike MDT 2013

Hi,
Just want to check if Config manager supports migration from Winxp to Win7 or win 8?
I face issues with MDT 2013 TS if i use it to upgrade machine to win 7 from win xp, just wondering if config manager 2012 R2 supports windox deployment\upgrade?
Regards,

Hi,
Johan explains it all here:http://www.deploymentresearch.com/Research/tabid/62/EntryId/127/What-if-I-told-you-The-OSD-Support-Matrix-for-MDT-and-ConfigMgr-is-here.aspx
So, yes with a WinPE 3.1 boot image.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Is Anyconnect Network Access Manager module supported on iOS ?

Hi there,
I can't seem to find any reference in regards to support for iOS / android . Can someone please confirm this is the case? much appreciated !!

AnyConnect VPN is available for iOS, not Anyconnect NAM.

Does 10.6.8 support DHCPv6?

I saw in the release notes for 10.6.8 that IPv6 support was "improved." Unfortunately, I don't see any specifics as to what these improvements were. Has DHCPv6 support been added?
Anyone who uses OS X with IPv6 on a Cisco router will greatly appreciate not having to manually add their DNS IP address manually.

Kappy I do appreciate you taking the time to respond to my question, and I don't mean to sound rude, but that IPv6 test doesn't have anything to do with DHCPv6. Everything between your AEBS and your Mac was likely configured using stateless address autoconfiguation (SLAAC,) which is not DHCPv6.
Here's an explanation of the difference between DHCPv6 and SLAAC from the DHCPv6 wikipedia entry:
DHCPv6 is the Dynamic Host Configuration Protocol for IPv6. Although IPv6's stateless address autoconfiguration can also be used to acquire IPv6 access, DHCPv6 may be a more suitable solution to assign addresses, nameservers and other configuration information as being done today with DHCP for IPv4. A notable case is Domain Name System servers used on a network, albeit other mechanisms exist for this in the Neighbor Discovery Protocol.[1]. At the time of writing, Microsoft Windows does for example only support the method used with DHCPv6 and not RDNSS with stateless address autoconfiguration.
The only reason I ask this question now is because IPv6 enhancements were reported in 10.6.8. From what I have seen in the packet captures I've done here, the "managed config flag" bit is set in the router advertisements, which means my MacBook should be using DHCPv6 for additional configuration, however it is not.
So basically all signs point to 10.6.8 still not supporting DHCPv6, but I was hoping that had changed with 10.6.8's IPv6 "improvements."

Access Management Basic Questions

Hello, I have several basic questions regarding the access manager. Short answers are OK for me.
1) Is there a build in self registration process for end users
2) Where Access Manager store it's users data (AD, Ldap, Identity Server ? )
3) Does Access Manager come standalone or it rely in SUN IdM
4) Does Acess Manager has it's own workflow engine or can rely on IdM
5) What is the programming language XPRESS or any other.
Thank You !!!!

Hi Shivaram, thank you for reply.
Regarding the 4. What if I want to create the workflow for End User self registration, For example user must be approved by manager. Is this should be done by IDM? Does that mean that all self registration process will be moved to IDM?
Regarding the 5 ,I meant is there a possibility to write my own code which will expand the Access Manager capabilities .Like make some changes in AM user creation or deletion process? Sending notifications to end users etc. Is there any API or programming language for this?
Thank You!!!
Alex.

Installing Access Manager

Hi All,
I have a question regarding the Access Manager installation.
Is it possbile to install Access Manager to a Directory Server which has Access Manager related data already in it or does Access Manager require a fresh Directory Server with no data in it.
Is the step, Is Directory Server provisioned with user data [No] > , is used to say whether the Directory Server already has data in it.
I know that we need to use the same Encryption Key while instaling the Access Manager to the Directory Server which has data in it. But does this work.
Thanks & Regards.

The question in the installer is worded very poorly.
When installing your first AM server, you will answer 'No'. On the subsequent AM Server installs you will answer 'yes'. And you are correct, you need to use the same Encryption Key.

Question on installing Access Manager 2005Q4

Hello everyone,
I have a question on installing access manager. It looks like access manager has to be installed into a web server running as root. The install program even warns you and gives you the option to fix it. After install does access manager still have to run as root, or can the web servers owner and group be changed back to webserved:webserved.
It would be nice not to have to run the web server as root just to have access manager working.
Also if it is possible to change the owner, could somebody point me to some directions to make sure I do it correctly.
Thanks for your help,
Gary

Is it possible to have the ldap servers running on port 389 and the web server running on port 80.One way you can do this (if you are on Solaris 10) is to use RBAC with a user in the net_privaddr role. See http://www.sun.com/bigadmin/features/articles/least_privilege.html for more information.
If a person already has an installed version as root, can it be changed to a non root user, or would it be just to much of a nightmare to do.That's what the doc describes how to do. Should not be a big problem but you might have to make a few adjustments depending on how far you've already gone with the install and config.
Does the ldap server and web server having to be running as the same user?No, you can use separate users.
HTH,
David

Does access manager only support uid as rdn?

Similar Messages

Maybe you are looking for