Does ACS 1120 5.0 version support RSA?

Hi all,
We are using Cisco ACS 1120 with 5.0 base licenced for TACACS , does ACS 5.0 support RSA server as external database for authenticating the users as we do in the previous versions of 4.2,4.0.
If so kindly let me know how we can do it ? or do we have any document?
Regards
Sreekanth

This is supported in ACS 5.1. ACS 5.1 can be downloaded from CCO and can upgrade ACS 5.0 to ACS 5.1
The RSA SecurID Agent is built in to ACS 5.1. Through the ACS GUI you can perform all the required configuration items to activate and configure the agent. This includes setting the:
agent record (sdconf.rec)
load balancing data (sdopts.rec)
node secret (securid)
agent status file (sdstatus.12)
For more details, see http://www.cisco.com/en/US/partner/docs/net_mgmt/cisco_secure_access_control_system/5.1/user/guide/users_id_stores.html#wp1134728

Similar Messages

SOLVED - BIOS UPDATE "SYSTEM DOES NOT CONTAIN the NECESSARY WMI SUPPORT for this VERSION of HPQflash

If you get infamous error when updating HP Portables (laptops/notebooks/ netbooks) BIOS within Windows:
"SYSTEM DOES NOT CONTAIN THE NECESSARY WMI SUPPORT FOR THIS VERSION OF HPQFLASH":
I am posting a solution found for own business laptop (HP 8540W & 8760W) so WebSearch engines index/register it in a few days - future sufferers come here and get a SOLUTION, finally. Disreagrd previous "experts" advises, they don't work 100% & pity on TechSupport folks who get HP paychecks yet don't know products their co. designs/manufactures (on deep Technical level):
Below is a SOLUTION (WORKING) !
Go into Services (Run "services.msc" or get there thru ControlPanel-->AdminTools-->), find following 2 services ==> make sure they're running, chances are they're NOT (as in my case I keep them disabled unless need running):
1) "HP Software Framework"
2) "HP Service" [no typo - a real plain name]
If not running, set Properties-->Manual and click "Start", make sure both are running.
Rerun BIOS updater, choose option for "Within Windows" or something to that effect (using HPQ/ROMpaq updater), rather than "create USB BootDisk on Key", this time it should work without the hassle of a BootDisk creation.
Should work from within Windows environment.
Notes:
a) Likely only one (1) service is responsible - namely "HP Software Framework" for HPQ Updater to fail, but doesn't hurt to reenable/restart both services.
I in fact am responding to other customers who elect to Update BIOS within Windows, perhaps oldfashioned but to me Boot Updater is more natural & always works regardless of WMI Support.
b) After done, don't forget:
*) Recheck BIOS settings - update may've added new and/or changed old, so rescan tobe sure.
**) Go BACK into Windows-->Services.msc & redisable both aforementioned Services if were originally disabled; or you're a computer Pro, you know what you're doing & like me keep all HP services disabled. The ones we got on EliteBook 8760W are pests consuming system resources, you just enable "Software Framework" when occasional issues emerge with HP softupdate (typically no issues) & redisable after use, rest of services are bloatware - some attempt to overrun Windows Wireless console, some seekout HP Networked printers (Ethernet, Wireless, but not USB), some do this & that - I study/know which one does what and decided to disable all. This is called a "minimalist" philosophy & turns your machine into a fast beast, I recently sold a very obsolete 4-year laptop which however handles 3DMCAD & complex designs/simulations, better new machines out fo a store, as new machines are loaded w/bloatware chocking down resources.
BUT nobody is requiring you to disable anything though.
The solution merely states the fact:
These 2 (or 1) services when not running halt BIOS Update "within Windows" (you can still run "BootDisk option", however, if preferred).
Simply restartung them solves your problem. Usually
Ya'll have a good day and enjoy!
===========
BELOW ARE IMPORTANT WARNINGS:
1) IF YOUR BIOS UPDATE STILL FAILS, SOME OTHER PIECE IN WMI SUPPORT IS MISSING - IN MY CASE WAS THESE 2 SERVICES, BUT THERE'S REMOTE POSSIBILITY SOMETHING ELSE MIGHT BLOCK UPDATER. DON'T WASTE TIME & CHOOSE "USB/BootDisk" options instead
2) Once BIOS updater does its job, will ask to auto-restart - let it go on & complete, it will self-shutdown (click "Next" to skip 60-second timer), then do NOT turn it on manually!, wait - it'll turn on by itself in 15 seconds, let it boot into Windows, you're done!
3) WARNING: close other apps before proceeding, be 100% sure your ACpower won't be interrupted or better yet - make sure battery is in/charged (so if ACpower accidentally disconnects, you're autoswitched onto battery) b/c power loss may result in severe damage to internal hardware. In the old days it'd result in fatal damage, these days powerloss would still result in a major repair (ROM chip corruption).
So to summarize: those 2 services I specified, are often responsible for whether HPQ/ROMpaq will or won't run.
Other causes possible, but I've not witnessed; and if so - choose BootDisk option.
===
Stan M. Starinski, MSEE.

Hello Ceramics.
Your ProBook is an Enterprise model. It would be a good idea to also post your question to the HP Business Boards as those forums deal specifically with that kind of product. Here is a link.
Have a great day!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

Does the oracle golden gate version 11.1.1.1.2 support oracle 12C database ?

Hi experts,
Currently in our environment we are having Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bit DB which is replicated via oracle golden gate version 11.1.1.1.2. As per the application team requirement we need to migrate this database to 12C.
Can any one help me on the below queries
Does the oracle golden gate version 11.1.1.1.2 support oracle 12c database ?
Are there any syntax changes in oracle goldengate versions which needs to be taken care in extract or replicat parameter files ?
Thanks,
Mushraff Shaik

Hi,
>>Does the oracle golden gate version 11.1.1.1.2 support oracle 12c database ?
Why do you think it will not support 12c database ?
From a Golden Gate perspective you need to create schema and use that. As you are moving to 12c database, ideally you should think of upgrading Golden Gate 11.1 to 12c so you can use new feature such as Multi Threaded replicate etc..
HTH,
Pradeep

Is it possible to run Labview ver 6.5 with PowerPC as the target CPU and VxWorks as the target operating system? If version 6.5 does not support this configuration, do any of the later versions support it?

Is it possible to run Labview ver 6.5 with PowerPC as the target CPU and VxWorks as the target operating system?
If version 6.5 does not support this configuration, do any of the later versions support it?
I have an Ada executable that's creating a buffer of data that's being fed to a Labview executable that's displaying the data in a GUI. We're re-architecting some legacy system hardware and I'm just trying to figure out if this configuration is even possible.
Thanks

Hi,
I never heard of LabVIEW6.5. I only know of LV6i, LV6.1 and LV7.0...
Why don't you just call your next/regional NI sales rep?
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Is it possible to run Labview ver 6.5 with PowerPC as the target CPU and VxWorks as the target operating system? If Labview ver 6.5 does not support this configuration, do any of the later versions support it?

Is it possible to run Labview version 6.5 with PowerPC as the target CPU and VxWorks as the target operating system?
If version 6.5 does not support this configuration, do any of the later versions support it?
I basically have an Ada executable and Labview executable that currently run on a Sun Machine with Solaris as the operating system. I'm re-architecting the system hardware and will be getting rid of the Sun Machine and Solaris. I'm don't have any issues with the Ada executable, but I'm not sure what configurations Labview supports.

duplicate post
In the future, please don't try to stuff your message in the subject line. Thanks.

Does Firefox 7.o have a supported 64-bit version for Windows 7?

On the system requirements page for Firefox 7.0, I found the following statement: "Please note that while the 32-bit and 64-bit versions of Windows Vista and Windows 7 can be used to run Firefox 6, only 32-bit builds of Firefox 6 are supported. at this time."
I do not understand why Firefox 6 is mentioned on the Firefox 7 system requirements page. I have Windows 7, 64 bit version.
Does Firefox 7.0 have a supported 64 bit version that runs on Windows 7--64 bit version?

Not yet. The web page text is incorrect.

ACS-1120 version 5.2

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman","serif";}
Hi,
i have 4 X ACS-1120. Each 2 are operating as an Primary and backup. I want to add a license in order for the ACS to support more than 500 networks which includes in the base license.
As I understand this is the license required : L-CSACS-5-LRG-LIC=
Is this license applicable to ACS-1120 appliance with ver 5.2 ? – I understand that it is.
for my scenario, do I need to purchase total of 2 X L-CSACS-5-LRG-LIC= (one for each environment, one license will serve 2 X ACS in Primary and Backup) or I need to purchase 4 licenses each for each ACS ? – I understand that one license will serve deployment of two ACS in primary and active scenario.
Appreciate your help,

Please post in the correct forum:
https://supportforums.cisco.com/community/netpro/security/aaa

Does Internet Explorer (specifically a version 7 through 9) work on a MAC 10.8.4? I would like to access documents from my work that are only supported on Internet Explorer.

Does Internet Explorer (specifically a version 7 through 9) work on a MAC 10.8.4? I would like to access documents from my work that are only supported on Internet Explorer.

Joni2b wrote:
...I would like to access documents from my work that are only supported on Internet Explorer.
I don't know how successfully this will be but you can turn on the Developer menu (Advanced tab in preferences) in Safari and change the User Agent to trick the documents into thinking you're using IE. You can also do that by adding the User Agent Switcher extension to Firefox.
Otherwise, you need to run Windows in BootCamp, as a Windows Virtual Machine in software such as VMware Fusion, Parallels, or Virtual Box, or the Windows environment of CrossOver Mac, as Niel says.

Does this version support raw files?

does this version support raw files?

Kind of. Any RAW files can be imported by uploading them to Creative Cloud first. Even then, it's very basic; just importing and working with images like other image types; no RAW adjustments like those available in Camera Raw or Lightroom.
Note this implies to existing supported camera RAW files. I'm not sure about brand-new cameras. (Usually, Adobe gets around to those cameras but it's not immediate.) Try it anyway if you're not sure.

I have MacBook 4.1 laptop with a Version 10.5.8 software. Does this software version support iCloud? Can this MacBook be updated to the latest software version?

I have MacBook 4.1 laptop with a Version 10.5.8 software. Does this software version support iCloud? Can this MacBook be updated to the latest software version?

Once you are at 10.6.8 Lion is still available from Apple. You will have to call Apple Customer Care 1-800-692-7753 or 1-800-676-2775. to purchase it. Then within 3 days you will get an email with a code which you can use to download Lion from the App Store. The price is $19.99.
Lion will require at least 2gb of RAM but really needs 4gb to run smoothly.
As for third party programs see this list for compatibility with 10.7 http://roaringapps.com/apps:table
Also Lion doesn't run any Power PC programs. To see if you have any Power PC programs go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up select Applications under Software. Then look under Kind to see if any of your applications are listed as Power PC. Universal and Intel will run under Lion.
Before Mac switched to Intel processors in 2006 they used Power PC processors from 1994 to 2005. Power PC 601 through 604, G3, G4 and G5. Applications written for the Power PC processors need the application called Rosetta to run on Intel processors. This was part of the Operating System in 10.4 and 10.5 but was an optional install in 10.6. With 10.7 Lion Apple dropped all support for Power PC applications.

How many external certificates server does ACS 5.2 support?

Hi,
Just wondering how many external certificates server does ACS 5.2 support?
I failed to find the number in user guide.
Thanks,
-Alejin

Hi,
There is no known limit number of CAs.
You go to
Users and Identity Stores >
... >
Certificate Authorities
And you can create for sure more than 100 CAs.
HTH,
Tiago
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.

Does JMF2.1.1 cross platform version support dvi/rtp

hi!!!
does JMF2.1.1 cross platform version support dvi/rtp ,8000.0 Hz,4-bit format???
when i type java AVTransmit2 javasound:/0 224.0.0.1 22222 at the konsole in linux i am getting the following error:
Audio not supported: interface TargetDataLine supporting format PCM_SIGNED, 44100.0 Hz, 16 bit, stereo, little-endian, audio data, and buffers of 22050 to 22050 bytes
Audio not supported: interface TargetDataLine supporting format PCM_SIGNED, 44100.0 Hz, 16 bit, stereo, little-endian, audio data, and buffers of 22050 to 22050 bytes

hi,
I still dont understand well the jmf either, but i can confirm that i am able to capture audio (using javasound://8000) to capture at 8Khz, setting a processor model with this source, AudioFormat.DVI_RTP and ContentDescriptor.RAW_RTP
and my transmition happens well:
dvi/rtp, 8000.0 Hz, 4-bit, Mono
I JUST CAN CONFIRM THAT JMF 2.1.1 DO SUPPORT DVI/RTP 8000.0 4BIT
as per the documentation, a processor model requires:
1. a datasource
2. an imput audio format
3. the output content description
one will think then that the audio imput should be linear and the output should be div/rtp, but it seems it doesnt work like that, im digging on the docs with no success till now, so by experiments i can say that somehow the imput audio format, already tells the kind of coder one will use, that case, DVI/RTP. This means, the data is encoded to a special DVI format who prepare the packets to be Transmitted, and then on the output content one says, is data ready to be transmitted, since is already packetize you say just content is raw or raw_rtp.
you can not for example say, then ok, convert my imput to a DVI and then packetize it to a (DVI)/RTP, because in this case you will have, starting from the capture device:
LINEAR convert to DVI> DVI packetize> DVI_RTP -----> Tx
why not? because there is no codec that receives DVI and convert it to DVI_RTP,
the only one we got is com.ibm.media.codec.audio.dvi.JavaEncoder
this one is only able to take linear and convert it to DVI/RTP
so you have to use the model
LINEAR ----> DVI/RTP -----> CONTENT = RAW ----> tx it, sink it, but not write...
to write there are more problems, but that was not the question, just tx
if someone can explain this better or point to a docs were it is explain it, ill appreciate,
regards,
jahm

I have just installed the new os x mountain lion - and now i cant enter the parallels desktop 6. does this version support parallels? what can i do? thanx

i have just installed the new os x mountain lion - and now i cant enter the parallels desktop 6. does this version support parallels? what can i do? thanx

You'll need to upgrade to Parallels Desktop 7 to regain compatibility. Good luck....
On Edit: A minute late!

Does Oracle WebCenter Interaction portal version 10gR3 support IE8?

Does Oracle WebCenter Interaction portal version 10gR3 support IE8?

Does Oracle WebCenter Interaction portal version 10gR3 support IE8?

Does rcapi on 800 series routers support CAPI version 2.0?

Does rcapi on 800 series routers support CAPI version 2.0? In that case: Is a certain IOS release mandantory?
Best Regards,
Martin Funke
K&K networks

Does rcapi on 800 series routers support CAPI version 2.0? In that case: Is a certain IOS release mandantory?
Best Regards,
Martin Funke
K&K networks

Does ACS 1120 5.0 version support RSA?

Similar Messages

Maybe you are looking for