Does Adobe Premiere 7 work ok and is it supported under Vista 64 bits operating system

Does Adobe Premiere 7 work ok and is it supported under Vista 64 bits operating system?

No, it's not supported under any 64-bit operating system.
But it seems to work in compatibility mode, which turns on automatically in Vista. It may occasionally suffer a hiccup, but it seems to work for many people.
Just make sure all of your firmware, RealTek drivers and Quicktime are up to date.

Similar Messages

Premiere CS5 - Project Monitor playback is jerky after resintall of operating system and CS5

PROBLEM: Premiere CS5 - Project Monitor playback is jerky
This had NOT been an issue prior to reinstalling the operating system and all software. I have read numerous articles on the forums and have tried everything I can find...with no results.
STEPS TAKEN TO RESOLVE THE PROBLEM:
I have scoured the articles here http://www.adobe.com/cfusion/search/index.cfm?loc=en_us&term=choppy%20video&cat=support&pr oduct=premierepro and others at Cretive Cow
I have installed all updates for CS5 Master Collection, immediately following a fresh install of the operating system and SC5 Master Collection.
I have ensured that sequence settings match resolution and frame rates of footage - the problem persists.
I have tested by importing both standard def AVI files created from tape and high def SONY MP4 files - the problem persists.
I have ensured the latest Video drivers are installed (clean installation selected, so that the Windows default would be removed) - the problem persists.
I have tried the 3D settings in NVIDIA control panel | Program Settings tab... selected Adobe Premiere Pro from the drop down menu | and chaged 'Multi-display/mixed-GPU acceleration from the value of 'Multiple Display performance' to the value of 'single display performance'; although, I ran two monitors before using this latest NVIDIA video driver and I didn't experience this jerky footage issue - the problem persisted after affecting that change; so, I switched it back.
Since I have 96 GB of RAM, I don't use a pagefile. A zero MB page file is the same setting I had prior to rebuilding the C: Regardless of whether I have a pagefile or not, the problem persists.
I have tried creating a fresh user profile, where the user profile is created on the C: drive by default; and, where I left it there on C: to test for the jerky playback in a new PrPR project - the problem persists.
Regarding the C: (system drive) and why I reinstalled everything, it had become unstable and was locking up. I ran DISK ERROR CHECKING with the FIX parameter and the system was still locking up on me. Keep in mind that the System drive is a solid state drive. Anyhow, I had no choice but to dive in and reinstall everything. I wiped the system partition of the SSD using quick format and started installing the operating system. Now, I've read the CLAIM that this cuases performance issues; but, the only place I see issues is in the video monitor playback in PrPr. Everything else - Office applications...printing...browsing the Internet...works just fine, everything is responsive, whereas, I couldn't do ANYTHING with it before.
SYSTEM CONFIGURATION:
The Operating system and all software is installed on C:
All data files and most profile related folders are stored on D:
C:\ (one Intel Solid State Drive - SYSTEM DRIVE) Used Space: 57.5 GB Free Space: 388 GB
D:\ (four Western Digital 2TB drives in an on-board INTEL hardware RAID5 array & hotswapable backplane) used space: 1.28 TB Free space: 4.16TB
Adobe Premiere Pro CS5 VERSION: 5.0.3 (005 (MC: 218798))
Operating System    Microsoft Windows 7 Ultimate Version    6.1.7601 Service Pack 1 Build 7601
System Manufacturer    Intel Corporation
System Model    S5520SC
System Type    x64-based PC
Video    NVIDIA Quadro FX 4800 driver v.320.78
Display        Dell 27" LCD (DisplayPort)
Display        Dell 27" LCD (DisplayPort)
Processor    Intel(R) Xeon(R) CPU           X5680 @ 3.33GHz, 3326 Mhz, 6 Core(s), 12 Logical Processor(s)
Processor    Intel(R) Xeon(R) CPU           X5680 @ 3.33GHz, 3326 Mhz, 6 Core(s), 12 Logical Processor(s)
Installed Physical Memory (RAM)    96.0 GB
Page File Space    0 bytes
PREMIERE PRO CS5 SETTINGS:
Monitor PLAYBACK RESOLUTION: Full
Monitor PAUSE RESOLUTION: Full
(regardless of this setting, the problem persists)
PREFERENCES:
MEMORY:
Installed RAM: 95.9 GB
RAM reserved for other applications: 10 GB
Optimize rendering for: Performance
(Changing this setting to 'memory' does not resolve the problem)
MEDIA:
Media Cache Files
X - Save Media Cached files next to originals when possible
LOCATION: D:\Users...\AppData\Roaming\Adobe\Common
(User Profile folders were relocated to D:\ from within the properties of each folder's 'LOCATION' tab. This is the same configureation I had prior to rebuilding the C:\drive. Testing under a new profile where it's allowed to stay on teh system drive does NOT resolve the problem.)
Media Cache Database
LOCATION: D:\Users...\AppData\Roaming\Adobe\Common
PROJECT SETTINGS:
Scratch Disks
Path: D:\Users...\My Documents\
General
Video Rendering and Playback: Mercury Playback Engine GPU Acceleration
(Setting Viideo Rendering and Playback to 'Sofware' does not resolve the problem)
If any of y'all have any other suggestions, I'm all ears.
Thank you.

I'VE RESOLVED THE PROBLEM!
PREFACE:
OK, I am hoping that through this week-long Operating-System-and-Software-reinatalltion excerise of mine, I have revealed something that everyone -- whom have been cursing Adobe over -- can apply to their systems to resolve this jerky video problem within PremierePro CS5 (and quite possibly other versions, too).
If you've read my post above, you've seen all the steps I've taken to resolve the problem. I've read many posts, some of which have mentioned hardware upgrade / opitmization steps that one may take to enhance performance, and hopefully resolve the problem. I've read where people have taken these steps and have still experienced the problem...and then they curse Adobe. Fer-shame, fer-shame, fer-shame! (nod to Gomer Pyle).
In my case, I knew it wasn't an Adobe issue, as it had worked flawlessly before; and, it wouldn't require a hardware upgrade or reconfigureation, as my system is completely maxed out with two processors, a system drive and a hardware RAID5 array, a CUDA-suported nVIDIA 4800 FX card, and 96 GB of RAM. bla bla bla, puke...whatever. Bottom line is this:
It's not a software issue. It's not and Adobe issue; and Gawd no! It's NOT a PC vs. Mac issue! HA HA. The software had worked swimmingly well prior to the reinstallation / 'lobotomy' I perfomed on the system drive.
SOLUTION FOR ME:
Download and install the updated drivers for the motherboard. Mine is an Intel Workstation Board S5520SC. Intel has an INTEL DRIVER UPDATE UTILITY which automatically scaned my Intel system and identified drivers which needed updating. A very handy, time-saving tool!!! Here's the URL: http://www.intel.com/p/en_US/support/detect?iid=dc_iduu
The scan revealed two Intel drivers needing an update:
Intel Chipset
Wired Networking
and one non-intel driver:
Creative Labs Sound Blaster X-fi
I downloaded and installed these three drivers, rebooted, and tested PremierePro, and was extatic to find this resolved the problem.
If you have a motherboard from another manufacturer, then you may want to navigate over to their wibsite to locate chipset and other updated drivers for your motherboard.
ROOT CAUSE:
While Microsoft Windows 7 Ultimate was able to install certain default drivers during the Operating System installation (keeping in mind that this was done on an Intel Solid State Drive that I formatted using Quick Format) these default chipset drivers apparently weren't current and were ultimately the root cuase of the jerky video playback within PremierePro CS5.
Peace

New iTunes still not working with 64 bit operating systems?

When will iTunes support advanced 64 bit operating systems...
Would seem that a next generation phone would work with the next generation of operating systems...

iTunes does work with vista 64 bit. I can sync my iPod with it. It's the 'Apple Mobile Device Support' portion that is required by the iPhone that isn't working.

Why does Adobe sendnow work and the newest and greatest Adobe Send does not work?

Why does Adobe sendnow work and the newest and greatest Adobe Send does not work? I wasted about 8 hours on trying to get Adobe Send to upload 269 files that amounted to 469MB. When it did not work I made a zip file and after a lot of wasted run time that did not work. The first situation gives little indication of when a file is loaded compared to Adobe SendNow. In both cases with Send it failed with a message like only the first 50 can be loaded. When I went and looked none of them had been loaded. With the zip file (I wanted to hide the individual files so they would not be counted) it appeared to work but very slowly and finally said it was done and I went and looked and it had done anything for oever 2 hours except a false "I'm runninng" indication.
Thus, I took a chance with Adobe SendNow and it works great. It never gave me a limit on the amount of files nor on the size of the complete job. It shows me one file at a time when it has finished with the file uploading it. SendNow has never given me any problems.
Why woiuld you want to change the program from SendNow to Send without the newest program being the best, fastest, user friendly program of the two? It just doesn't make sense to me. I suggest that Adobe keep SendNow working until Send is fixed. I would also suggest that SendNow and how it looks be kept, called Send, then modify Send one thing at a time until you get it to the point you need it to be for Acrobat. I have heard nothing good and now I have experienced it that Send is a piece of junk. I wasted most of my work day on giving Adobe the benefit of the doubt to find out I made a very bad decision to trust Adobe to make good decisions on the transfer of a function to another place .... both Adobe's responsibility.without making it painless for your customers that totally rely on you. Don't throw away customer confidence as it is very hard to get it back.

Funny how you answer to "troll". (What's your handle on AT&T forums?)
Yep! Verizon living up to it's contractual obligations by not releasing updates. Caveat emptor!
I think there are some reasonable expectations here to keep customer's happy. When one carrier offers upgrades there is an expectation the same will happen across all the carriers. We have seen that except Big Red.
Verizon could have said the update is in MS court months ago and stilled the voice of the disgruntled, or at least redirected it, but instead chose to be silent. Not for market share but for partial blame I think.
We will have to agree to disagree since you only see Terms & Conditions and I, see customer satisfaction.

I bought adobe premiere elements 12 and my serial number doesn't work

i bought adobe premiere elements 12 and my serial number doesn't work

anthony2504
Did you just purchase Premiere Elements 12 - online download or installation disc?
Was the program ever installed by you a while back and are you trying to reinstall it now?
Are you sure that you are working with the serial number and not a redemption code?
http://helpx.adobe.com/x-productkb/global/redemption-code-help.html
When working with downloads and installs, please work with antivirus and firewall(s) disabled.
Please review and consider, and then we can decide what next.
Thank you.
ATR

Dear Sirs, I have just purchased adobe photoshop elements 13, adobe premiere elements 13 and I am having torouble installing and finding it to work with it. Please help.

Please help, I just purchased Adobe photoshop elements 13, Adobe premiere elements 13 and I have no ideal how to find it on my computer. It says it has downloaded it in my downloads but when I go to it I can't pull it up. Which means I can't use it. Please help me download correctly so that I can use it. Thanks

Nitan15479421 the serial number should not contain letters. It is likely you received a redemption code. Please see Redemption Code Help for information on how to redeem your redemption code.

XDCAM HD workflow with Adobe Premiere Pro CC and Macbook Pro

Hi folks,
I have an assignment for a TV production to secure and convert the data (mxf files XDCAM HD 422 1080i 50 / 50 Mbit/sec with 8 audio channels) from Sony XDCAM camcorders (PDW-700) for postproduction.
The producer wants me to convert the mxf files during production to Apple ProRes 422 (HQ) for faster and smooth editing during postproduction.
I'm not sure about the final output yet, but I guess it will be either 720p50 or 1080i 25, since the production will be broadcast and as far as I know this is the standard for HD on German television. It is also not clear which NLE will be used for editing (usually one of the producers edits their projects with FCP, but this time they've got their hands full and are still looking for someone to outsource postproduction.
Unfortunately, my Macbook is getting fixed as we speak, so I can't try things out.
Since this is the first time I'm doing this workflow, could someone please check if I got everything right?
1. Can someone please confirm that I can actually convert the mxf files using AME CC to Apple ProRes 422?
Or do I need to install any other tools/converters for this task? Does MPEG streamclip do the job? Any other freeware?
2. When converting to Apple ProRes422, the producer suggested to deinterlace the footage (1080i 50) to 25p, if 720p or 1080p I have to find out tomorrow since our conversation got interrupted this afternoon.
In my opinion this doesn't make sense, though. First, if output to 1080i 25 it has to stay interlaced anyway. Second, in case the output will be 720p 50 I would edit the footage either natively or in Apple ProRes 422, but leave deinterlacing until the very end when outputting to the final format. This way I could use an advanced deinterlacer, e.g. the one from Magic Bullet Suite, rather than just checking some deinterlace box in the export settings for Apple ProRes 422.
The reason the producer suggested to deinterlace right away when using an intermediate like ProRes was that she and the client got irritated by the jagged lines from the interlaced footage when editing the last project with the same requirements on a progressive display.
3. What would be the best solution to tackle this issue (jagged lines) during editing?
As I said my Mac is getting fixed, so I have no way of trying things out,and I usually edit DSLR footage which is progressive anyway.
But if I remember correctly I can switch my monitor between 1080p and 1080i. This should do the trick, shouldn't it?
4. Can I keep all of the 8 audio tracks when converting to ProRes using AME CC ?
5. Is ProRes422 (HQ) really necessary, or is the regular quality sufficient for this kind of job?
6. Let's assume the whole project would be edited within Adobe Premiere Pro CC and system specs as stated below:
Since Adobe Premiere Pro CC has native support for XDCAM HD is there any advantage of using an intermediate like ProRes at all?
How smooth is native editing with XDCAM HD in Premiere Pro CC? I don't think there will be more than 3-4 video tracks in use...
Thanks for your help!
working with
Adobe Premiere Pro CC and Adobe Media Encoder CC
Apple MacBook Pro
Intel Core i7 Quad Core Prozessor
2.3 GHz and 6MB L3 Cache
16 GB RAM 1600MHz DDR3,
256 GB SSD
Intel HD Graphics 4000 512MB + nVidia GeForce GT 650M with 1 GB GDDR5 RAM

Thanks Jim! I knew there must be a reason xdcam is widely uses for eng aquistion :) I think they used FCP 6 or 7 on their last project... So what about monitoring interlaced footage on a progressive screen? Any advice on that? Is there a converter built in to APP CC that deinterlaces in realtime when monitoring interlaced sources on a progressive screen? And would you agree that deinterlacing source material is best left right before outputting?

Why does Adobe Premiere Pro modify original footage/asset files (e.g. mov)? (CS6)

Background:
A colleague had given me a large 33Gb .mov for use in a project, I put this file on a backup drive.
I made an identical copy of this 33Gb .mov file and placed it in a folder that I'd use to work on a Premiere Pro Project.
I ran Adobe Premiere Pro CS6 and dragged in the 33Gb .mov file into the Sequence (imported it)
Premiere Pro CS6 started conforming the file.
After it had finished, I noticed that it's Modified Date was just now i.e different to the Modified Date on the original copy of the file on the backup drive (see step 1)
I ran a BeyondCompare check between the .mov file on the backup drive (see step 1) and the one that the Premiere Pro project was using (step 2, 3) and Beyond Compare reported they were different.
I had initially thought it was unrelated file corruption of some kind, but I have checked this several times and got the same outcome, so it's definitely Premiere Pro deliberately modifying the file.
So I am puzzled: these are supposed to be the same file.
Why would there be a need for Adobe Premiere Pro to modify the footage?
What does it do to the file?
Would it not be better to create a separate file if necessary?
I can accept this if that's how it works and it's good to know that it was Premiere Pro deliberately modifying the files and not corruption (so my hardware ought to be healthy). But it makes more sense to me if Premiere Pro made separate modified copies for its own use. Modifying the file as it does hinders my process for checking the integrity of backups; if the original asset footage files were the same as earlier copies then it would be easy to know that the backups are OK.
Thoughts?

Definitive Answer (I believe): It's all about this setting, "Write XMP ID To Files On Import" - which confirms that Adobe Premiere Pro is deliberately modifying the .mov file: http://helpx.adobe.com/premiere-pro/using/preferences.html#WSE3BD4A43-7022-4fe6-97F5-95313 935347B
These posts give some background as to why having this setting enabled would be beneficial: one benefit being to be able to skip conforming files by matching the conformed file with the original using the embedded XMP tag :-
http://helpx.adobe.com/premiere-pro/using/preferences.html#WSE3BD4A43-7022-4fe6-97F5-95313 935347B
http://www.dvinfo.net/forum/adobe-creative-suite/498627-why-premiere-modifying-video-files .html
https://forums.creativecow.net/thread/205/876064
(Found using Google search term "adobe premiere pro date modified")

I am trying to use my adobe premiere elements 12 and when I go to click on a "new project" it takes me to the sign in page. Once I type my information in and click on "sign in" a little 'thinking circle' pops up and it just keeps spinning

I am trying to use my adobe premiere elements 12 and when I go to click on a "new project" it takes me to the sign in page. Once I type my information in and click on "sign in" a little 'thinking circle' pops up and it just keeps spinning but it never ends up doing anything. Please help me with this issue. I really need to get this project started like yesterday. Thank you.

dplum12
What computer operating system is your Premiere Elements 12 running on? Did you have the opportunity to update 12 to 12.1 Update yet using an opened project's Help Menu/Update? If not, please do so when you get the opportunity.
For now I will assume that your computer is Windows 7, 8, or 8.1 64 bit. Please try the following suggestions to overcome your Premiere Elements Sign In issue.
http://www.atr935.blogspot.com/2014/04/pe12-premiere-elements-12-editor-will.html
and, if you get any messages about Internet connect and the computer clock, please review the following
http://www.atr935.blogspot.com/2014/04/pe12-sign-in-failure-connect-to.html
Please let us know the outcome.
Thank you.
ATR

Adobe Premiere Elements 7 and SSE4

I have searched and searched, but still can't find information anywhere on this question. Maybe I've just missed it somehow....
My question is: Does Adobe Premiere Elements 7 make use of SSE4 instructions on Intel processors?
Again my question regards Premiere Elements, not Premiere Pro.
Thanks to anyone with "official" information or a link to the same.

<[email protected]> wrote in message news:[email protected] > Well, here's what you get. > <a href=http://en.wikipedia.org/wiki/SSE4> > > It's hard to say if that will actually improve your video > editing experience significantly or not. I don't get the OP - I got over 500 hits on the Adobe web site for SSE4. BTW, if you try to run versions of APE even as old as APE 2 on a processor that lacks SSE4 (e.g. some older AMD Durons), its a non-starter.

I purchased a License for Adobe Photoshop Elements 13 plus Adobe Premiere Elements 13 and Adobe doesn't recognize the License Key, Adode customer services aren't interested.

I purchased a License for Adobe Photoshop Elements 13 plus Adobe Premiere Elements 13 and Adobe doesn't recognize the License Key, Adobe customer services aren't interested, neither are Ebuyer.com.
Where do I go next? Credit card company to ask for a refund?

57dibbs
Has you contacted the seller through its Customer Service?
If that is the case and Customer Service has no idea of what you were given as a Product Key and how to use it, have you considered asking
your question in the seller's forum (PC software section)?
But, I have another idea for you to try first....are you involved in a student teacher purchase with prepaid card? If so, please click on the following link
http://helpx.adobe.com/x-productkb/global/find-serial-number-student-teacher.html#card-sub mit-product-code
and go to the section on "I received a prepaid card, and I need help". In that section go to "2" which is for
"Submitting my product code and proof of eligibility to Adobe". You will notice there is a link to click on that
is related to country. Make the appropriate choice and see if that solves the problem. You should see
Visit the page listed on the back of your prepaid card to submit your code and proof.
For customers inside North America, www.adobe.com/go/edu-validate
For customers outside North America, submit through your region's customer portal below:
Europe, Middle East, Africa | Germany | France | Spain | Italy | Netherlands | Czech Republic | Poland | Asia/Pacific | Korea
Verification can take anywhere from 2 to 30 days to validate.
If the above does not apply to you, then I would explore the seller forum for answers if you cannot get them from Adobe Chat or the seller's
Customer Service. Getting your money back from the seller should be tried as soon as possible if you find no solution.
Thank you.
ATR

Why does Adobe Premiere CC lockup on the launch?

Why does Adobe Premiere CC lockup on the launch?

Without system information and otehr details nobody can even guess.
Mylenium

Does adobe cc work with Lion 10.7?

Does adobe cc work with Lion 10.7?

Cckika Mac OS 10.7 is currently supported and all included software will function under Mac OS 10.7. You can find more information regarding the system requirements to use Creative Cloud at http://www.adobe.com/products/creativecloud/tech-specs.html.

I just purchased adobe premiere elements 12 and at the end of the installation it mentioned to go to apple . com and get quick time?

I just purchased adobe premiere elements 12 and at the end of the installation it mentioned to go to apple . com and get quick time? I'm interested in doing time lapse video. Not sure as what to do... Any and All help would be Greatly Appreciated, Thanks, in advance.

EuGene
What computer operating system is your Premiere Elements 12 running on? Have you updated 12 to the 12.1 Update? If not, please do so using an opened project's Help Menu/Update.
The latest version of QuickTime is a requirement for Premiere Elements. Among other things, without it you will not have QuickTime export presets when you get to the Publish+Share/Computer/QuickTime exports. So, please download and install latest version of QuickTime to computer with Premiere Elements 12/12.1. QuickTime like Premiere Elements requires that it be run with you as Administrator. Is your User Account one with Administrative Privileges?
Apple - QuickTime - Download
Some reading material if your interest is in Premiere Elements and Time Lapse video
http://www.atr935.blogspot.com/2013/07/pe-time-lapse-video-basics.html
ATR Premiere Elements Troubleshooting: PE: Numbered Stills in Time Lapse and Other Animations
Please update us on your progress when you get a chance. Any questions or need clarification, please do not
hesitate to ask.
ATR

Why does adobe Premiere Pro CC Crash every time I export a movie file?

Why does adobe Premiere Pro CC Crash every time I export a movie file?

Please hand type your posts directly into the browser window. Copy/Paste leaves unwanted code throughout.
span style="color: #ffffff; font-family: Arial, Helvetica, sans-serif; font-size: 12px; background-color: #000000;"

Does Adobe Premiere 7 work ok and is it supported under Vista 64 bits operating system

Similar Messages

Maybe you are looking for