Does Aiport Express work with internal modem and dial up ?

Does Airport Express allow for internet connection if you only have a dial-up account with an internal modem (iBook G4)?
When configuring the Airport Base Station in the Utilitiles/admin section - the only options available are for Ethernet/PPP - the modem options are grey and not selectable.

Hi,
An AirPort Express is not capable of using its USB port for the connection of a mobile broadband modem.
One possibility would be to combine an AirPort Express with a special adapter (such as this product) with Ethernet output.
Another possible solution would be to use a mobile broadband router (perhaps something similar to this or this) with built-in Wi-Fi, instead of the above combination.
Make sure that the USB mobile broadband modem in question is supported in both cases.
Jan

Similar Messages

Does airport express work with PC

Does airport express work with a dell laptop?
Can one setup an airport express for the very first time using a dell laptop?

Yes on both. FWIW, I currently have a Dell laptop that has no issues connecting to my AirPort network. I also have AirPort Utility for Windows installed on this laptop when I need to administer the base station. In my case the laptop is running Windows 7.

Does Airport Express work with a Windows Computer?

Does Airport Express work with a Windows Computer?
I'm trying to setup an older Airport Express to play iTunes
with a Windows Computer. I just want it to join my network,
since I'm already connected to another router.
Thanks,
Paul

Is there a Windows version of the Airport Utility (I think that's what it's called)...
Yes. That is only needed to configure the AirPort Express (AX).
...or do I have to go through Windows setup software?
You may have to do that to get Windows to join the wireless network.

HylaFax on OS X 10.4.7 Working with internal modem but not USB Modem

I have managed to configure and install HylaFax on a powerbook G4 with an internal fax/modem.
Only a couple of hangups to get that configuration to work.
As per the prerequisites outline here:HylaFax Prerequisites
You need the Xcode tools to use it's compiler.
The only other thing you may not have is:
libtiff
ghostscript
If you are running an x-serve you probably already have an MTA as well (postfix)
There are someOS X Specific install instructions of which I only had to follow the first couple, to create a user. Some of the latter instructions I found unecessary since startup is handled by launchd as far as I understand.
Before I compiled I had to put the hylafax source on a thumb drive, I know it seems wierd, but it worked. Something to do with the HFS+ format of the hard drive. But low and behold it worked. (the hylafax website mentions issues with other disk formatting besides UFS, but the fat32 formatted thumb drive worked for me)
A little side note:
You need to actually download the ghostscript fonts from the ghostscript project FTP site and mv them to the proper location:
/usr/local/share/ghostscript/8.54/fonts/
Once installed run:
/usr/local/sbin/faxsetup
It should prompt you to install your modems.
After doing this I had to start hylafax
#sudo /usr/local/sbin/hylfax start
and run a faxgetty command to enable incomming and outgoing
#sudo /usr/local/sbin/faxgetty ttys.modem
After doing so I was able to receive faxes and open them up with a pdf viewer, as well as send faxes via an application or printer driver on the mac and PC (windows xp with win hylafax print) Super SIMPLE! which is great for end users.
Okay so here is why I am actually posting on here. It is great that I got this working, but the final configuration will be on an x-serve that has no internal modem, and I would like to use more than one modem in case of high traffic incoming and outgoing. I purchased 2 apple usb fax/modems and when running faxaddmodem it even recognizes the modem, but never is fully able to use it like the internal modem. If anyone has any insight it would be great.
The issue I am seeing is that when I run
/usr/local/bin/faxstat -s
The modem says Waiting for modem to come ready
Thanks!

Just wanted to say I got hylafax to work with a usb modem on a powerbook, not sure if it's stable and user friendly enough to be used my a wide base here, but it's definitely cool, and it does work. I just wish it had LDAP/mysql integration, instead of the flat file business it has.
Anybody with any input on hylafax would be great.

Will aiport express work with osx v 10.6.6

Will airport express work with an old netcomm NB6 router modem using osx v 10.6? Or do I need to buy a better modem first?

My airport express is quite old. Model A1088.
This model was discontinued about 7-8 years ago, so the product is at least that old, probably older than that. On average, the Express will last about 5 years.
I can't seem to get my airport utility to find this. Airport utility is the latest version.
Not sure what you mean by latest version of AirPort Utility. That would be a 6.x version, which does not support the older model of the Express that you have.
Or, did you mean to say that you have the latest version of AirPort Utility 5.6.1.....which would be the correct version for the Mac running (10.6.6)?
Please clarify.

Does airport express work with garage band in lion?

Actually I know it can work and there are apps out there to make it work but I heard a rumor that Apple was going to allow functionaliy between the two in Lion. So my question is...
Will Airport Express work with Garage Band in Lion or do I have to buy third party software?

I believe the HP 2840 can be connected either via Ethernet or USB. If connected to the AirPort Express Base Station (AX) by USB, only the basic printing functions will be shared out; the scanning, faxing, copying features are not supported.
If the AX is configured so that its Ethernet port is enabled, the it may be possible to gain all of the printer's features by connecting it to the AX by Ethernet. In this case, the printer will use its own Print server to share out all of these features.

Does Airport Express work with Airport Base Station (not Airport Extreme)?

I'm needing to extend the range of my Airport base station. I purchased an Airport Extreme to funcion as a repeater, but it's not working. Will Airport Express work with a (white) Airport base station. If not, how can I extend the range besides moving the base station?

Can someone actually tell me how to set-up the Airport Express (with my Airport) so that it will act like a repeater. Once again, this is an Airport and not an Airport Extreme.

Why does new Skype work with one user, and not another?

Running 19.4.5, I installed the latest version of Skype. (I do not activate it on login) This opens, but crshes/unexspectedly quits on "sign in". I tried the same with a "new user", and the app opened fine. I compared the two users to make sure that Skype was correctly featured in my usual user. No difference. Still crashes.
Does anyone have an idea what could be conflicting with Skype?

Right, problem solved! . Am posting this as it may help in future. I use a useful little app called Window Dragon,(a haxie) which helps resize windows with the mouse. This was causing the conflict, but had not with earlier versions of Skype. All I had to do was exclude Window Dragon from working with the new updated version of Skype and everything back to normal.
Solutions to apps that "quit unexpectedly" or crash often mention that haxies can often come into conflict with apps. So best to start with any haxies one has installed, disable, test etc..

Does Airport express work with Mac os X.2.8?

G3 with 10.2 and airport 3.1
Airport express working properly with my ImacG5 and the Ibook G4 of my friend os 10.4 in 802.11b/g mode and WEP 128 bits.
But my Ibook G3 still not detecting my network.
I'm sure the airport card is ok, because I managed to use a local network with an other Ibook.
Thank you for help.

Yes you should be able to access the wireless network created by the AirPort Express regardless of which version of the Mac OS you are using.

Does Air Express Work with other brand Routers?

I just got an Airport Express. I can't seem to get it to work with my Linksys router. Are the supposed to work with other brands, or only Apple?

Since you now have two 802.11n AirPorts, you will want to take advantage of the "extend a network" feature this version offers instead of the 802.11g WDS.
Here's the basic setup to extend the 802.11n AirPort Extreme Base Station (AEBSn) with the AXn ...
o If practical, place the base stations in near proximity to each other during the setup phase. Once done, move them to their desired locations.
o Open AirPort Utility and select the base station that will connect to the Internet.
o Choose Manual Setup from the Base Station menu, or double-click the base station to open the configuration in a separate window. Enter the base station password if necessary.
o Click AirPort in the toolbar, and then click Wireless.
o Choose “Create a wireless network” from the Wireless Mode pop-up menu, and then select the “Allow this network to be extended” checkbox.
o Next, select the base station that will extend this network, and choose Manual Setup from the Base Station menu, or double-click the base station to open its configuration in a separate window. Enter the base station password if necessary.
o Choose “Extend a wireless network” from the Wireless Mode pop-up menu, and then choose the network you want to extend from the Network Name pop-up menu.
o Enter the base station network and base station password is necessary.
o Click Update to update the base station with new network settings.
(ref: Page 46 of "Designing AirPort Networks Using AirPort Utility.)

Does Logic Express work with M-Audio Fast Track USB

Hi all, just wondering if logic express 8 works with the m-audio Fast Track USB - http://www.m-audio.com/products/en_us/FastTrackUSB.html ?

This should probably go in the Logic Express 8 forum. Regardless, I see no reason why it wouldn't be perfectly functional using LE8. Is there a reason why you are opting for a USB device? Does your Mac not have a firewire port?

Planning to get New 27" Does Boot camp work with the 1T and 3T Fusions Drives

I am planning to get a NEW 27" IMAC [if they ever come out] and use Parallels Desktop® 8 or Bootcamp for Gamming.
Going with:
27" 3.4GHz quad-core Intel core I7 with 8MB L3 cache
8GB Ram - Upgrade to 32GB 1600MHz DDR3 from Crucial or OWC
3TB 7200rpm Fusion Drive
NVIDIA GeForce GTX 680MX Graphic processor with 2GB of GDDR5 memory
AppleCare Protection Plan
Samsung SE-506AB Slim Portable Blu-ray Writer =+$89.
I work with Photoshop, some Video and Play World of Warcraft.
Planning to do Gaming on the PC Side with using Bootcamp or Parallels Desktop® 8.
As you see I was planning to get the 3TB 7200rpm Fusion Drive.
But I don't know if it would work with Bootcamp.
Not sure if a separate Volume need to be made for the PC side?
If a 768 SSD would work?
Or do I have to go with Regular hard drive?

Hello,
Kind of funny, the 3 TB isn;tsupported for BootCamp!?
Frequently Asked Questions
Do I need to configure Fusion Drive?
When ordered with a Fusion Drive, your iMac or Mac mini is pre-configured.
Can external USB, FireWire, or Thunderbolt hard drives be added to Fusion Drive?
An external drive cannot be used as part of a Fusion Drive volume. Fusion Drive is designed to work with an internal hard disk drive and internal flash storage.
Can I add a partition to the hard disk with Fusion Drive?
Using Disk Utility, you can add one partition to the hard disk on Fusion Drive. Once you add the partition, the "plus" symbol in Disk Utility to add additional partitions will be grayed out. You cannot partition the Flash storage.
If I create a hard disk partition is it part of Fusion Drive?
The additional partition is not part of Fusion Drive. The new partition is a separate volume that is physically located on the hard disk drive.
Can I add a Windows partition?
You can create one additional partition on the hard disk with Fusion Drive. You can create either a Mac OS X partition or a Windows partition.
If creating a Windows partition, use Boot Camp Assistant to create it, not Disk Utility. From the Go menu, choose Utilities. Then, double-click Boot Camp Assistant and follow the onscreen instructions. For more information on Boot Camp see the Boot Camp support page.
Note: Boot Camp Assistant is not supported at this time on 3TB hard drive configurations.
http://support.apple.com/kb/HT5446

Does Photoshop Express work with Android Lollipop?

Hello,
Since i've upgrade my android phone to Lollipop i can't activate Premium looks in adobe express..
Any ideas?

PS Express works on Lollipop. Please update your app to the latest version. You can sign in with Adobe ID to get Premium features free.
Please kill and relaunch app when you are in network and see if the premium looks work.

Does report2.5 works with srw.run_report and Oracle Apps11.0.3

Hi,
I have reports2.5 and using srw,run_report I want to call another report. NOw I have registered this in oracle apps 11.0.3 . Now through oracle apps if I run the main report it has to call the child report (calling via srw.run_report) and the output should be put in the Unix server directory /tmp/
Please help Ratheesh.
Iam not sure whether report2.5 works fine with srw.run_report and oracle apps11.0.3

Try this isntead.
java -classpath d:\jdbc\classes12.zip;. jdbccheckup
an error occured:
Exception in thread "main" java.lang.NoClassDefFoundError:jdbccheckup
Why??????

Mail Works With Internal Modem But Not With Airport

The Mail app works great when I use a dial up connection but it won't work when I connect with Airport. It was something I could live with before because I could easily retrieve email through my ISP on the web, but now Mail won't work with my iPhone 3GS either after syncing it up with iTunes. Any suggestions?
Thanks, Charlie

Okay, I found the answer if anyone is having the same problem. The Mail POP settings on the Mac for the various Accounts I had were outdated. They were just for Dial-Up. Here is the link for the entire ATT page that deals with High Speed and iPhone connections, and the part in particular that helped me get it going.
http://help.att.net/docs/use/email/gen/prbxxx_xxx_mail-news-settings.htm?area=customeremail-osxmail&platform=OSMAC&faqcounter#isps
Note: Worldnet support is limited to providing the iPhone E-mail Configuration Settings. For all other iPhone technical support issues, refer the customer to: att.com/wireless
Note: If you are using Mac OS 10.x, set up Mac OS X Mail to access your AT&T Worldnet Service e-mail.
E-mail Settings:
Mail Server Type: POP3
Incoming Mail (POP): ipostoffice.worldnet.att.net
Outgoing Mail (SMTP): imailhost.worldnet.att.net
Note: If you are using Netscape Mail, enter your other ISP's outgoing e-mail server. If you are not sure what the SMTP server name is, contact your non-AT&T Worldnet Service ISP.
Ensure that the option My server requires authentication is checked.
User name or POP name: Enter the full e-mail address in the User Name field. For example: [email protected] or [email protected]
Ensure that the option Always connect to this account using is selected, and Local Area Network is chosen from the drop-down menu on the Connections tab.
Ensure that secure connection (SSL) is enabled and set to port number 465 for SMTP.
Ensure that secure connection (SSL) is enabled and set to port number 995 for POP3.
Cheers, Charlie

Does Aiport Express work with internal modem and dial up ?

Similar Messages

Maybe you are looking for