Does Aironet AP1121G support multicast?

Hello everybody.Can the two wireless client under the same AP1121G support the multicast forwarding?What do I config on the AP1121G?
Thanks a lots.

Hi,
What is the IOS version of your AP?
Refer to the following url on how to configure filter to allow multicast forwarding.
http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_configuration_guide_chapter09186a0080341cc4.html
*Look under 'Configuring and Enabling IP Filters'
Hope it helps.
Rgds,
AK

Similar Messages

Does ACE-30 support multicast in routed mode?

We currently have ACE20's, which only support multicast in bridge mode.
Was wondering if it's the same on ACE30's, or if Cisco finally implemented support for mcast in routed mode.
thx
Kevin

Could you please confirm if this applies to both ACE20 & ACE30, or just ACE20?
If both, when does Cisco plan on supporting mcast in routed mode?
thx
Kevin

Does BT IP Clear MPLS support multicast?

Hi
Requirement is to multicast music on hold RTP stream from a Data Center to a remote site over BT IP Clear MPLS network. Catalyst 3750 switches (both running IP Services Image) will BGP peer with BT PE equipment. The Catalyst 3750 switches will also be configured with PIM-SM.
Does BT MPLS support IP Multicast? I could not find any info on the web so I am hoping people have tried it and (hopefully) it worked for them!
Are there any restictictions/limitations using Catalyst 3750 for BGP peering?
Thanks

sidhu
If you are looking for multicast support on mpls link then you need to ask your SP to provide you the mVPN services. Because they need to configure the default and data mdt under the vrf.
regards
shivlu jain

Does Flash Media Server support MULTICAST?

I've been looking thru all the doc's but I can't seem to find
a single thing about whether Flash Media Server can actually
support multicast.

If by
multicast you mean each user can have an individual "stream"
that they can control independent of other users, then yes. HTH...

Cisco devices that support Multicast traffic?

Folks,
I am looking for list of Cisco devices that support Multicast traffic. Does anyone know how to get this information?
Thanks,
Nagesh

Cisco Feature Navigator

Can mpls support multicast?

Hi,
Can mpls support multicast packets?
Meaning, can multicast packets be sent to destinations over mpls network?
If so, how does it work?
I read in this forum somewhere that someone mentioned mpls and multicast can co-eixt.
What exactly does it mean?
Thanx!

In the MPLS network you can either use native multicast or you could implement mVPN on the PE routers if you implement MPLS VPN. mVPN uses native multicast in the core to encapsulate the multicast messages coming from a CE router and to forward these messages to PEs containing the same VRF.
For more information on mVPN, see the following link:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t13/ftmltvpn.htm
Hope this helps,

Does Video Conferencing use multicast?

We want to enable vide conferencing between multiple remote sites, however, our providers backbone does not support multicast traffic.
The question I have is if I have 2 users in Boston, 2 in NYC and 2 in SF for video conferencing, is the traffic output from a MCU a multicast or unicast to the remote sites?
This is with the MCU at the NYC location.

H.323 uses unicast traffic. Some vtc endpoints are also capavle of generation a mutlicats video stream, but that is not a part of the H.323 feature set. Multicast is not supported on the public internet, and very few if any providers are going to allow it on their backbone.

Does SFP-TX support Tri-Rate(10/100/1000Base-TX) on Aruba 72xx controllers?

Q: Does SFP-TX support Tri-Rate(10/100/1000Base-TX) on Aruba 72xx controllers?
A: Aruba do not support 10/100 on copper SFP on any controller platform.
The SFP-TX support only 1000Base-TX when used on the 72xx controllers.
If the peer interface is 100Base-TX then we will have a speed mismatch and the link will be down.

yes. but it still says linked not connected
# sh interface ethernet 1/19
Ethernet1/19 is down (Link not connected)
Hardware: 1000/10000 Ethernet, address: 547f.eebb.2580 (bia 547f.eebb.2580)
MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA
Port mode is access
auto-duplex, 1000 Mb/s, media type is 10G
Beacon is turned off
Input flow-control is off, output flow-control is off
Rate mode is dedicated
Switchport monitor is off
  EtherType is 0x8100
  Last link flapped never
Last clearing of "show interface" counters 00:00:07
30 seconds input rate 0 bits/sec, 0 packets/sec
30 seconds output rate 0 bits/sec, 0 packets/sec
Load-Interval #2: 5 minute (300 seconds)
    input rate 0 bps, 0 pps; output rate 0 bps, 0 pps
RX
    0 unicast packets 172 multicast packets 22 broadcast packets
    194 input packets 23236 bytes
    0 jumbo packets 0 storm suppression bytes
    0 runts 0 giants 0 CRC 0 no buffer
    0 input error 0 short frame 0 overrun   0 underrun 0 ignored
    0 watchdog 0 bad etype drop 0 bad proto drop 0 if down drop
    0 input with dribble 0 input discard
    0 Rx pause
TX
    0 unicast packets 0 multicast packets 0 broadcast packets
    0 output packets 0 bytes
    0 jumbo packets
    0 output errors 0 collision 0 deferred 0 late collision
    0 lost carrier 0 no carrier 0 babble 0 output discard
    0 Tx pause
0 interface resets
# sh interface ethernet 1/19 status
Port          Name               Status    Vlan      Duplex Speed   Type
Eth1/25       --                 notconnec 160       full    1000    SFP-1000BAS

What type of HDD does MS-6382 support?

Hi,
My system has a MS-6382 mobo & I've got to change to the hard drive. I've been looking at ebay & the link below describes a HDD which has "ATA/133 or SATA interface and capacity of 120 GB"
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=16178&item=5208766733&rd=1
I don't know much about computers, or even the right questions to ask really, but does the 6382 support 7200rpm drives, ATA/133? What general specs for a HDD should I be looking for?
I would be grateful for any help anyone can give!
Here is some info on my current HDD:
HD Tune: ST380020A Information
Firmware version : 3.39
Serial number : 5GC0KMYD
Capacity : 73.1 GB (~78.5 GB)
Buffer size : 2048 KB
Standard : ATA/ATAPI-6
Supported mode : UDMA Mode 5 (Ultra ATA/100)
Current mode : UDMA Mode 5 (Ultra ATA/100)
S.M.A.R.T : yes
48-bit Address : no
Read Look-Ahead : yes
Write Cache : yes
Host Protected Area : yes
Device Configuration Overlay : yes
Automatic Acoustic Managment : yes
Power Managment : yes
Advanced Power Managment : yes
Power-up in Standby : no
Security Mode : yes
Firmware Upgradable : yes
Partition : 1
Drive letter : C:\
Label : MR01-G4
Capacity : 74822 MB
Usage : 17.54%
Type : FAT32
Bootable : Yes
Jorolat

Quote from: Wonkanoby on 19-June-05, 21:26:02
ata 133 is just a marketing gimick.............only data moves that fast is 2mb in the drives cache
the drive will run at about half that speed once the cache is cleared
dont worry about it
Er, I got another question
I'm now looking at this hitachi model:
http://www.cclonline.com/product-info.asp?id=210&pc=dealtime#
which has good reviews (probably for others in the range). I originally saw it on ebay but it turns out to be cheaper buying it from the above supplier.
The question I have is does the MS 6382 support serial ATA? I'm reasonably sure that the above drive is parallel ATA (ie compatable with the MS 6382) because of the manufacturer's info here:
http://www.hitachigst.com/hdd/support/d7k250/d7k250.htm
but I thought I'ld ask before I order it or in case I change my mind (again).
Thankyou for your help
Jorolat

Does lion server support a single email address across multiple devices??

I am looking to move from an outdated Microsoft Exchange Server 2003 to OS X Lion Server but I am unsure as to how Lion will handle email. I do not want to spend money on a new windows server if I can get a Mac Mini Server to do the job. I am a very small business with a number of email accounts for a couple employees and need access to email and calendar from both the office iMac's and my Macbook Pro when on the road. My IT guy says I need Exchange but he's been off base on a few other items recently and I wanted to check with other sources.
I have 2 new iMac's, a MacBook Pro, an iPad1 and and iPhone4 on the mac side of things and 2 windows computers running XP. I would get rid of the windows computers completely if not for my CAD program which runs best not in a virtual machine mode.
How well will email and calendar entries sync across devices?

I have a very similar setup at my office. Lion Server will push email, calandar, contacts to all of your apple product with out a hitch.
As far the Windows XP machines, you can access email over IMAP with Thunderbird, and calandars via sunbird or the built in web app.
I would ditch the exchange server move to Mac OS X Server, and never look back.
God Luck!
PS. All of your devices will be in sync all the time.
Shore answer:
Does lion server support a single email address across multiple devices??
Yes.

Does Crystal 2011 supports SAP R/3 4.6?

Friends,
I would like to know Does Crystal 2011 supports SAP R/3 4.6? Please help.
Thanks,
Tilak

Hi,
yes, it does. Here is a Screenshot from the CR2011 SPS6 Data Access File
The (4) indicates:
(4) SAP servers required to have at least the above patch levels. The following correction notes should be applied to your SAP BW / SAP NetWeaver BI system: 1125433, 1161911, 1162349, 1162416, 1170323, 1230303 and 1007048. OSS Correction Note 1007048 requires a manual configuration step.
Regards
-Seb.

Camera RAW does NOT yet support raw files for the new Canon Sureshot S95

Camera RAW does NOT yet support raw files for the new
Canon Sureshot S95.
Adobe, please can you provide an update asap

Hello!
I think that you need to be patient.
There has not been any release of Camera Raw since the release of the camera.
I recommend to try the next version once it will be released, as there might be preliminary support (and therefore not listed).
Usually, Adobe is amongs the firsts to support a new camera.
Even though the Camera Raw team is fielded with wonderful coders, I do not think that they do have a time machine to allow support before they have their hands on a camera

OK, as always I waited before downloading a new OS and I sure glad I did. On the APP store I sorted comments by most critical...and WHOA...what is Apple doing? No support for Logic 9, MS Office? Is Apple only trying to reach the iphone/iTouch crowd? HELP!

OK, as always I waited before downloading a new OS and I'm sure glad I did. On the APP store I sorted comments by most critical...and WHOA...what is Apple doing? No support for Logic 9, MS Office? Is Apple only trying to reach the iphone/iTouch crowd? HELP! I was going to buy a new Mac pro & two 27" monitors but until I see some real problem addressing by Apple...I'll keep what I have and see how everything pans out. If anyone has any comments to ally my fears, I welcome them. I've been a devoted Mac user since 1993. 7500; G4; G5; and my latest Mac Pro...Where do I go? Again...HELP!

Hi there,
If you look through ALL the reviews, they are mainly good. I feel that Lion is an excellent upgrade, although not essential.
There have been some issues with MS Office, but right now, it is up to Microsoft to issue a Lion compatible update, which will come in time. Saying this, MS Office has been working fine on my mac, it seems to be an isolated issue.
Logic 9 seems like a strange issue. Again, an update looks to be coming soon, with Lion support.
I do not feel that apple only focusing on the iPhone and iPad user base. There are many features carried along, but the machine can still be used for pro tools and use just as well. It still is a fantastic, reliable, fast, easy to use OS, which I have had very few problems with. Some additions you may not use, but they don't get in the way. You will love the new Exposé, Mission Control, as it is great for pro users who have many windows open at once, and the new spaces. You may however, never use Launchpad, but you don't have to, just drag it away from the dock!
I really reccomend buying a mac with Lion, although if you are worried about bugs, wait a few months for the issues to be ironed out, and updates to be given. Because the update is so very cheap, I really think you can hardly go wrong. Try it out with your current mac, and if you like it, go ahead and buy your new ones.
Lion is fantastic, albeit maybe rushed.
Any other queries, just ask,
Nathan

Does Apple TV support wireless connection to the new MacBook Pro retina in an extended display mode?

Does Apple TV support wireless connection to the MacBook Pro retina display in an extended display mode? What is the output resolution and is sound also transmitted across?

SB1983, by extended display do you mean mirror? All MBP since early 2011 support it if they are running OS X 10.8 Mountain Lion. The resolution will depend on your Apple TV (2 Gen is 720 and 3rd Gen 1080) and wifi, it will lose some quality but I find it minimal. It does also mirror the sound.
Jules

Does AVL table supports popin in WebDynpro ABAP

Hi,
Just a short question, does AVL table supports popin in WebDynpro ABAP?
I know that popin in supported in normal table in WD ABAP. Is this feature also available for ALV table?
Thanks
Yingzhi

Hi Yingzhi Liu,
Did you get any answers to this question?
I'm also trying the same where we need to show additional details for an ALV table row. Is it possible to have a table popin in ALV? We are on 2004s release and implementing Web Dynpro for ABAP.

Does Aironet AP1121G support multicast?

Similar Messages

Maybe you are looking for