Does airport extreme or any of the modems work with tds?

Does airport extreme or any of the modems work with tds?

Sorry. What do you mean by "tds"?
Also, Airport Extreme is not a "modem". It is a router.
Please rephrase your question.

Similar Messages

  • Does Airport extreme include a built in modem ??

    Does Airport Extreme include a built in modem??

    None of the current Apple AirPorts include a built in modem.

  • Does anyone know if any usb keyboards will work with a imac g3

    Do all usb keyboards and mice work with the imac g3

    Jimmer,
    Just a note on PC keyboard function keys.  The windows function keys work but you will get frustrated by the location of the command key.  The 'undo' and 'cut' and 'copy' and 'paste are z x c and v but the command key on a PC keyboard is where the 'control' key is on a mac.  You will be giving the wrong command if you use the mac key location and the PC location is a stretch for your thumb to reach.  There is no harm done by plugging in another brand of USB device.
    Jim~

  • Does a Macbook pro bought in the US works with Australian voltage???

    Hi, I just bought a Macbook Pro 13" in the US and I'm moving soon to Australia, wonder if I don't have any problem with the input AC there. The power cord says it works from 100-240V.
    Thanks in advanced for any help!!

    Yes, it works there. You use the same power brick and charger. All you need is a different plug (they pop off the current charger you have and you replace it with a different one) Apple sells an international travel plug set for about 39.00.

  • Does Airport Extreme (2010) support Jumbo Frames?

    I changed my MacBookPro, my iMac27" and my NAS to Jumbo Frames (first try 9000 MTU, then 4074). But there was no faster copy speed. Now I wonder whether my switch "Airport extreme (from 2010)" is able to work with Jumbo Frames. As far as I see, on the Airport extreme there is no possibility to change the MTU.

    Yes. The 2010 (actually 2009) Gigabit AirPort Extreme base station incorporates a Broadcom BCM5395 chip that supports Jumbo frames up to 9728 bytes.

  • Does the Airport extreme provide any sort of usage reporting? Either per user or aggregate usage of the broadband port

    Does the Airport extreme provide any sort of usage reporting?  Either per user or aggregate usage of the broadband port

    No. You may be able to retrieve that information from your ISP.

  • Why does my airport extreme not recognize my cable modem anymore?

    Why does my airport extreme not recognize my cable modem anymore?

    Have you tried resetting the modem? Power it down and let it rest a moment, then power it back up again.
    Also, some ISPs require physically detaching their cable from the modem for it to be fully reset. Literally unscrew it from the modem. Try that, in conjunction with powering it down.
    Don't do anything with your Extreme, other than powering it down too, in the event the modem reset does not help. Reconfiguring it may be necessary but this is not justified quite yet.

  • I bought an Apple Airport Extreme used and it did not come with any software disks. how would make it work without the software disk?

    Bought an Apple Airport Extreme used and it did not come with any discs. Do i need any discs? or is there another way to setup this airport without using a software disc?

    You can download the setup manual and software that you need.
    Look on the bottom of the AirPort Extreme for the Model Number.  It's A.......  something.
    Post back with the model number and the exact operating system you are running on your Mac or PC.

  • Recently bought airport Extreme and have connected the device to the modem. WIFI works. However when I connect the LAN port to a switch I do not see the LAN printer and my NAS. Which setting do I miss?

    I have installed my Airport Extreme and have conencted it directly to a modem. WIFI works fine. However I do not see my LAN network (printer. NAS,..).
    Analysis:
    Scen#1: When I connect the LAN port of the Airport Extreme to a switch (as input) and connect the other LAN devices also to the switch, those LAN devices do not have access to the internet. Also connecting the iPAD with WIFI to the Airport Extreme I cannot find my LAN printer and other devices.
    Scen#2: When I connect the LAN port of the Airport Extreme to a router X (as input) and connect the router X to the same switch, and the LAN devices to the switch, those LAN devices do have access to the internet. Also connecting the iPAD with WIFI to the router X I can find my LAN printer and other devices in the LAN network.
    Question what has impacted the behaviour of the Airport Extreme, not to detect the devices in the LAN network. Why is the use of a switch directly behind the Airport Extreme not working (no internet access for the other devices and Airport Extreme is not the basis station for the LAN network)?

    Your scenario #1 is a correct configuration and should work. It seems as though your Extreme is not acting as a router as I believe you intend.
    Most likely, you need to reset your modem. Power it down and let it rest for a few moments. Some need longer than others. Then, I recommend you "hard reset" your Extreme (see below) and configure it again, after the modem has been reset. From then on do not change what is connected to your modem without powering it down first.
    Once configured, confirm your Extreme's wireless network works as expected and that your iPad and every other wireless device can load web pages. Then, connect the printer directly to one of the Extreme's LAN ports and confirm that it works as well. After that it should work equally well with a switch between it and the Extreme, as should every other wired device connected to the switch. This assumes your switch is an unmanaged device requiring no specific configuration.
    Scenario #2: Having a router connected downstream of another is not a normal configuration, so don't pursue that as a solution. It will only distract you from determining the problem. If you want to repurpose Router X as another device do so only after everything else is working to your satisfaction.
    To "hard reset" an AirPort Base Station: make sure it's powered up, then press and hold its tiny reset button and keep it depressed for five to ten seconds, long enough for its LED to flash amber rapidly. Release the reset button. Then, the LED will glow amber steadily for about a minute. Then, it will flash amber, slowly, about once every second or two, waiting for you to configure it with AirPort Utility.

  • My Imac late 2012 running Yosemite does not recognise my Huawei 3g usb modem. itried to install Java bt still it does not although the same modem works with my MacBook pro . any help please

    My Imac late 2012 running Yosemite does not recognise my Huawei 3g usb modem. itried to install Java bt still it does not although the same modem works with my MacBook pro . any help please

    Hey there mbarikiwa,
    If your iMac still has not recognized the usb modem, I would use the troubleshooting for Yosemite USB issues in the following article:
    OS X Yosemite: If a USB device isn’t working
    If the device is connected to a USB hub: 
    Make sure the device and the hub are the same speed. Connect USB 3.0 SuperSpeed devices to a USB 3.0 SuperSpeed HUB, USB 2.0 Hi-Speed devices to a USB 2.0 Hi-Speed hub, and so on. 
    If the device doesn’t have a power cord and is plugged into another USB device that doesn’t have a power cord: 
    Try plugging the device directly into your computer’s USB port  or into a USB device that does have a power cord. You might need to disconnect and reconnect the other device as well, if it has stopped responding. 
    If you have many devices connected to your Mac: 
    Disconnect all USB devices except the device you’re testing, an Apple keyboard, and an Apple mouse. Make sure that the device is connected directly to the computer, and that any hubs or extension cables are disconnected. If you can use the device now, the problem may be with one of the other USB devices or hubs you had connected to your computer. Try reconnecting them, one by one, to your computer. When you find the device causing the problem, review its documentation for further troubleshooting steps. 
    Verify that the device appears in System Information: 
    Choose Apple menu > About This Mac. In the window that appears, click Overview, then click the System Report button to open System Information. 
    In the window that appears, see if the USB device is listed below Hardware in the Contents list. If the device appears but does not work, review the device’s documentation for further troubleshooting steps. 
    Restart apps: 
    Quit and restart any apps that use the device. 
    Restart your Mac: 
    Choose Apple menu > Restart.
    Check your device’s USB connection
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • Any feedback on the new Airport Extreme 802.11n vs the previous version?

    Is the new version that much better and faster? Anyone have it set up with Apple TV?

    The range (and therefore the speed) is definitely better. I used to require a 3 node WDS to get decent throughput throughout my townhouse. Now I use one AirPort Extreme and it covers the whole unit.

  • How to use Airport Extreme to create a second wireless network with different IP addresses behind an existing modem/router?

    Hi,
    I have an existing modem/router from my ISP that does DHCP and NAT with base IP 192.168.1.1 distributed in the wireless network. I use this wireless network for our private devices. I could turn off the DHCP server in this first router, but there isn't a separate setting to turn off NAT.
    I want to connect my Airport Extreme (4th gen) to this existing router to create a separate wireless network for visiting guests, where IP addresses of 10.0.0.0 etc. are used. So I do not want to use the Airport Extreme in bridge mode, as I would like to keep the devices on the first network 'invisible' for those on the second network. (P.S. when connected in bridge mode, the Airport works well and can distribute a network with a different name from the first. It's just that I would feel more comfortable about our privacy if the Airport were to distribute a different IP range. False security, maybe?)
    I've tried doing this by 'Sharing a public IP address' in Airport Utility's Internet tab, leaving TCP/IP's setting to 'via DHCP', setting DHCP addresses to start with 10.0.0.2 up to 200 with all else blank, and not using a standard host nor NAT-PMP in the NAT tab.
    When I do this the Airport complains of a 'double NAT issue'. Internet connectivity seems to be OK, but when switching between the two networks on my Mac I get complaints about my IP address being in use by another device intermittently.
    Can anyone help in how to get the 'double NAT issue' resolved?
    Thanks!

    So if someone is connected to the modem/router network they will be able to see the HD I will have put in to the AirPort Extreme?
    As I said above.....since the modem/router and AirPort are bridged, devices on the modem/router wireless will be able to "see" devices on the AirPort wireless, and vice versa.....
    If they can see the HD connected to the AirPort Extreme, will they be able to access it
    Yes, unless you plan to password protect the drive connected to the AirPort Extreme.
    or will they still need the password needed to get onto the AirPort Extreme network?
    The modem/router and AirPort Extreme are bridged. They are on the same network. All devices are on the same network when the modem/router and AirPort are bridged. Not sure how else that I can say this.
    Also, because it is bridged, I shouldn't have any problems accessing the HD I will have connected to the AirPort Extreme from an external location?
    Accessing devices from a remote location is never easy....and a topic for a different post/discussion. If you have a "static" Internet IP address from your provider, and have all the details on how to forward ports on your modem/router, you are off to a good start.
    Apparently there is some addressing issues because devices can be seen as "Double IP" because the modem/router would have allocated IP's as well as the AirPort allocating IP's thus making connections slower until resolved
    When you "bridge", all IP addresses are issued by one device. There will be no conflicts on the network, since they are bridged.
    Once again, in very simple terms, you have two doors (access points) that open into the same room (network).  One "door" is the modem/router and the other "door" is the AirPort Extreme. They are on the same network....("room") because they are bridged.

  • How to use in italy an airport extreme base bought in the states?

    I have received as a gift an Airport Extreme base bought in the States and it doesn't work well. In few words it happens that the connection with the modem is discontinue. Maybe it's because it was built to be used in an "american" environment. Is there someone that can help me to understand if an US base cannot be used in Europe or what can I do to set up correctly the base? Thx a lot. Massimo
    Product: Airport Extreme
    Version: 7.7.3
    Modem: ADB Broadband DA2200

    You will simply plug the Extreme into the main router by ethernet.
    Setup the Extreme to bridge mode.
    Whatever the airport utility chooses which can be wrong.. simply press edit when it is finished.
    Change the Network setup to bridge.
    And for wireless I recommend you select a manual channel for 5ghz.. because the US model is set to North America and does not have any settings for Europe. You need to set the AE to something that overlaps.
    See the WLAN wiki and the chart for 5ghz.
    http://en.wikipedia.org/wiki/List_of_WLAN_channels
    2.4ghz won't be a problem.. US is a subset of Europe.. but 5ghz are markedly different.
    Apple provide no way to change regions.

  • Macbook pro connects to airport extreme only 50% of the time

    Hi,
    I have a mac book pro that i use with an airport extreme unit. When the laptop comes out of hibernation it does not connect to airport extreme. I have to put it back to sleep and start for the second time for it to connect. Any ideas on what the problem is?
    thanks!
    MacBook Pro   Mac OS X (10.4.10)  

    Hi Laurent,
    although I was given the advice earlier that I should simply take the machine back to the shop, or call the help centre, I ended up just praying that it would be OK.  A couple of days after I posted the message I think there was an update to download and install, just a regular one from Apple from the Software Update option for the operating system or it may have been one for Final Cut Pro X, and once it installed I never had the problem again, so my prayers were answered.
    It was pretty scary at the time because I thought it must be some hardware malfunction, but because it was resolved through an update it suggested it was a software issue.  Hopefully it is the same with you.
    I'm now running 10.7.2 and have had no recurrence of the problem in many months, thankfully.
    It might have nothing to do with it, but the only other two things that may have somehow caused errors in the system startup (and I doubt these will be "unrelated" to people who know how computers work better than I do, but I feel I should mention them just in case), but I also updated Final Cut Pro X from a glitchy version to version 10.0.2 around the same time, and I also had an application installed which didn't function correctly in OS10.7 called PowerController (a simple app that can start up the computer at a set time and play music from iTunes as an alarm clock) and it was in the group of apps that were set to start at the starting up of the computer.
    Anyway, I hope your problem is resolved as easily.  Pray about it too!

  • I hope this might interest someone. The situation; 3 floors,I am having trouble with an an Airport Extreme, 802.11n on the top floor and a Mac Pro 3.1 on the bottom floor. Not always but often it has trouble seeing the Airport and making a connection. I h

    I'm not sure how to post a message. I hope this might interest someone. The situation; 3 floors,I am having trouble with an an Airport Extreme, 802.11n on the top floor and a Mac Pro 3.1 on the bottom floor. Not always but often it has trouble seeing the Airport and making a connection. I have an older Airport Express, would it help to install it? would it work best if it was installed in the same room? should it be installed half way in between? Get another Extreme? The Mac Book Pro on the middle floor can see 11 networks in the neighbourhood if that might be causing a problem or would if I installed the Express. Thank for your consideration.   

    Thanks for your time ... I appologize for the font and colour, I compossed the question in pages and failed to notice the font colour as grey ... there are a variety of computers of various ages so I think it is using a setting that allows both 5G and 2.4 ... the connection to the Airport is thru a cable modem and cable does run throuhout the house ... maybe those hard wires would be a place to look at ... do you think that putting the 'Express' on the second floor might help ... thanks again ...

Maybe you are looking for