Does Airport Time capsule needs to be always connected by WAN to wifi router to use as external hard drive?

Hi,
I'm getting puzzled.
I have:
New Airport Time Capsule
MBP 15 Retina
MBP 15 2008y
ATV3
Broadband with wifi SkyHub router
iPhone 5s
To use the Capsule as wireless external Hard drive does it needs to be always WAN cabled to SkyHub wifi broadband router? Awkward if does.
If I plug it out I can't see the capsule in the Finder?
How to set it up?
How to move files?
I wish to have on the capsule iTunes & iPhoto libraries, other documents and have acces to them from both MBPs and phones. Not as back up machine but for everyday use.
Thanks
Marcin

I wish to have on the capsule iTunes & iPhoto libraries, other documents and have acces to them from both MBPs and phones.
That is possible for your MBPs but not for your iPhones. In addition, you are likely to find its performance with iTunes and iPhoto to be unacceptably slow, to the point of uselessness.
If you really want to, it is possible to configure the Time Capsule join your existing router as a wireless client. In that configuration it will be available to your wireless network as a storage and backup device. It does not strictly need a wired connection to your router. To configure it that way it is best to start with a "hard reset".
It's not worth the effort though, due to the unacceptably slow transfer speed you are likely to achieve.

Similar Messages

  • I just bought a time capsule and it will not connect to preexisting home WiFi.

    I just bought a time capsule and it will not connect to preexisting home WiFi.  The Airport Utility recognizes one of my neighbors networks but not mine.  I have ATT&T U-verse.  I understand I can use the Airport time capsule as a router but would prefer to use it in my existing network

    tallswag wrote:
    I have a similar hookup, I have a Airport Extreme & Time Capsule. I would like to connect my Extreme to the Time Capsule "6th gen". I would also like to use the LAN ports on the Extreme. Can this connection be done wirelessly or wired? I'm using a Mac Tower that does't have a wireless card if that's important. 
    As long as you have two apple routers then it is up to you which way you do it.
    You can connect them by ethernet and use it setup as roaming network.. for wireless.. it will simply be bridged on the router side. Ethernet is much the faster solution.
    But if you want to use wireless link that is also fine if the range is not too great. Then ethernet to the computer.. so you effectively have a wireless bridge...
    so, Cablemodem----Airport Extreme- - - - - - - -wireless link- - - - - Time Capsule------computer
    Where the more solid lines are ethernet.. that is possible setup. And using the TC directly on ethernet to the computer will keep your backup speed good while also giving you hopefully your full internet speed so that works well.

  • Hello, I have two questions on time capsule  I can only have it on my external hd files and free up my internal memory to my mac  I can use an external hard drive, in my case a lacie rugged as shared memory for my two computers

    Hello, I have two questions on time capsule  I can only have it on my external hd files and free up my internal memory to my mac  I can use an external hard drive, in my case a lacie rugged as shared memory for my two computers

    I have a mackbook pro and an iMac if I buy a time capsule 2tb airport, I can use it with time machine and what would be the best way to use it.
    There is no particular setup required for TM.. both computers will create their own backup sparsebundle which is like a virtual disk.. Pondini explains the whole thing if you read the reference I gave you.
    and how to use time capsule airport whit other external hd to use my old lacie airport with the new time capsule
    Up to you.. you can plug the external drive into the TC and enjoy really slow file transfers or you can plug it into your computer and use it as external drive.. which is faster than the TC.. and TM can include it in the backup.
    Again everything is explained in the reference.. you are not reading it.

  • I am trying to confirm the time at which a particular backup occurred using an external hard drive that I have since misplaced. Although time machine lists the backup times for some backups, it does not list them for all. Can someone help?

    I am trying to confirm the time at which a particular backup occurred using an external hard drive that I have since misplaced. Although time machine lists the backup times for some backups, it does not list them for all, including the one in question. Can someone help?

    Okay, I've sussed it.  I saw a link to another discussion that hadn't turned up in any of my searches before I posted the question above.
    My Tosh HDD was formatted to FAT 32 and therefore would not be backed up by Time Machine.  I removed all data from it - nightmare as I hadn't enough space to put it on the macbook HDD, but, after trawling through numerous photos and deleting rubbish for hours, I finally made enough space and copied all data across.  Then, after clearing the data from the Tosh HDD, I used disk utilitity to reformat it to Mackintosh OS Extended.  Chose the option without kournalling because I'm not baking up onto this disk and so don't need it - according to some other discussions I found.
    When it was done I check on time machine in system prefs and once I selected options, I was able to remove it from the excluded from backups list.  Hey presto.  Now I'm moving my photo library and my music library onto the Tosh HDD and my macbook should start to breath again.  Hurray.

  • I used an external hard drive for my backups via Time Capsule.  I bought a new computer and I want to transfer all my old fonts over to the new one but when I go into the Font Library from the hard drive backup but my downloaded fonts aren't there?

    I used an external hard drive to back up my computer using Time Capsule before I bought a new one.  I am slowly transferring information fromt he backup to my new computer and I want to transfer over my old font book.  When I go into the Font folder on the hard drive the only fonts that show up are the ones that came stock with the computer not any of the ones I have downloaded over time.  Could they be downloaded somewhere else?

    The answer to that would probably be "Yes." If you don't remember where your fonts were stored, you may want to search your backups for any of the font files you know the names to. See where that takes you.
    Ideally, Font Book and other font managers will temporarily store the fonts you "installed" into the System when you run the OS. When you shut down, etc. they are removed and reloaded on restart. The permanent place fonts reside is where you saved them when or after you downloaded them. I typically create a Resources folder on the root level of the computer and place a Fonts folder there. Then I install fonts from there, and they are available to all users on that iMac.
    Perhaps if you did not have that kind of a strategy, perhaps many of them are still in your Downloads folder?

  • HT201250 Time machine back up using a external hard drive connected to the Airport extreme

    How can I setup a time machine back up using a external hard drive connected to the Airport extreme? Even better for time managment purposes I want to use the Eithernet Thunderbolt connection for the first back up and then through the wifi there after for daily routine Time Machine back ups.

    You can attach a hard drive, but Time Machine backups to a drive at the USB port at the AirPort Extreme are not supported by Apple, so it's not possible to say what your actual results might be.
    If you decide to try this, it would be wise to have a secondary backup plan in place as well.
    http://docs.info.apple.com/article.html?path=Mac/10.6/en/15139.html

  • How do you remove back up data from the memory storage? my storage data states that i have over 80gb of data used for back ups and i dont know why as i use a external hard drive as a time machine .now my 250gb flash storage is nearly full

    how do you remove back up data from the memory storage? my storage data states that i have over 80gb of data used for back ups and i dont know why as i use a external hard drive as a time machine .now my 250gb flash storage is nearly full.. HELP!

    When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as  Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
    See this support article for some simple ways to free up storage space.

  • Using an external hard drive with Airport Extreme

    I'd like to use an external hard drive to store movies and music through my Airport Extreme. The drive is connected to a powered usb hub which is connected to the Extreme. I can see the drive in Airport Utility but I can't figure out how to use it.

    Hi,
    I have just tried to set up an Airport Extreme with an external hard drive at home. I have 4 computers connected to the "network" - an iMac, a MacBookPro and 2 x windows machines. A printer is connected wirelessly to the two Macs.
    I cannot find the hard drive - I have tried the steps mentioned by Bob Timmons Mar 17 2010, but the only things I see under "Shared" in Finder are the iMac and the printer - not the Airport Extreme (seems odd??), not the windows machines, and most importantly, not the hard drive connected to the USB port on the Airport Extreme.
    I therefore expect that the iMac and printer are connected wirelessly and directly, rather than through my network (& I'm happy for the printer to be connected this way, but I do need the PCs and the hard drive all networked).
    According to my network connection, (in top bar on the screen) I am definitely connected to the network - yet nothing else shows in finder??
    I do, however, see the USB hard Drive when I go into Finder>Applications>Utilities>AirportUtility.app, under my Airport Extreme >Disks. I've also gone through all the set up procedures for "File Sharing."
    I have read other posts about formatting the hard drive ether FAT32 or NFTS - is this something I now need to do?? If so, which one should I use, and once I do it, will I then see it?
    Presumably, in order to format the Hard Drive, I will need to disconnect it from the Airport Extreme, and connect it directly to one of the Macs too?
    My apologies for so many questions, but this is all very technical stuff for the non-techie layperson.
    Many thanks for any help anyone can provide on one or more of the questions / issues.
    Martin

  • Hello, i am new to the mac and i need to learn how to re image using an external hard drive

    Hello, i am new, like baby fresh new,...lol, to the mac and i need to learn how to re-image using an external hard drive.

    How to replace or upgrade a drive in a laptop
    Step One: Repair the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    Step Two: Remove the old drive and install the new drive.  Place the old drive in an external USB enclosure.  You can buy one at OWC who is also a good vendor for drives.
    Step Three: Boot from the external drive.  Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears.  Select the icon for the external drive then click on the downward pointing arrow button.
    Step Four: New Hard Drive Preparation
    1. Open Disk Utility in your Utilities folder.
    2. After DU loads select your new hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID  then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    Step Five: Clone the old drive to the new drive
    1. Open Disk Utility from the Utilities folder.
    2. Select the destination volume from the left side list.
    3. Click on the Restore tab in the DU main window.
    4. Check the box labeled Erase destination.
    5. Select the destination volume from the left side list and drag it to the Destination entry field.
    6. Select the source volume from the left side list and drag it to the Source entry field.
    7. Double-check you got it right, then click on the Restore button.
    Destination means the new internal drive. Source means the old external drive.
    Step Six: Open the Startup Disk preferences and select the new internal volume.  Click on the Restart button.  You should boot from the new drive.  Eject the external drive and disconnect it from the computer.

  • I have an imac 2009 the disk drive is damaged and I have lost the passwords I need to reset passwords I tried booting with a macosx disk from an external hard drive but did not read the drive how else can I reset password ?

    I have an imac 2009 the disk drive is damaged and I have lost the passwords I need to reset passwords I tried booting with a macosx disk from an external hard drive but did not read the drive how else can I reset password ?
    I have a 2012 mac book pro can I use that to connect with firewire and load osx that way? and how woudl I do that?
    Thanks so much!

    To what password are you referring? Do you mean your user account's admin password? Or do you mean the master password for File Vault or do you mean a Firmware Password?
    For an admin password:
    Forgot Your Account Password
    For Snow Leopard and earlier
         Mac OS X 10.6- If you forget your administrator password
    For Lion/Mountain Lion
        Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
         When the menubar appears select Terminal from the Utilities menu.
         Enter resetpassword at the prompt and press RETURN. Follow
         instructions in the dialog window that will appear.
         Or see Reset a Mac OS X 10.7 Lion Password and
         OS X Lion- Apple ID can be used to reset your user account password.
    If you cannot do the above then try this:
      1. Boot to Safe Mode by restarting and after the chime press and hold down the COMMAND-S keys until a black screen with white type appears.
      2. At the prompt, type the following commands pressing return after each command line:
         /sbin/fsck -yf
         If you do not receive a "Filesystem OK" message then repeat this command until
         you do.  If after seven tries you still do not receive a "Filesystem OK" message,
         then the system is corrupted and needs to be reinstalled.
         mount -uw /
         cd /private/var/db/netinfo
         mv local.nidb local.old
         rm ../.AppleSetupDone
         shutdown -r now
    The second-to-last command above will cause OS X to think that the operating system is newly installed, and when the new owner starts up the computer it will send him/her to the startup wizard where he/she can start a new user without reinstalling.
    This last method does not actually change a password. It simply removes the user accounts and lets you create an initial admin account as if the computer were new out of the box.
    How to reset the OS X password without a startup CD:
    Reboot into Single-user Mode. Enter the following and press RETURN after each command line
       1. Type fsck -fy
       2. Type mount -uw /
       3. Type passwd <username>
    I have never tried this method myself.

  • I use an external hard drive for my Lightroom library and I notice that all the images shown on there are DNG. On my MAC hard drive I have images shown as NEF. I desperately need to free up space on my hard drive, can I safely delete these NEFs?

    I use an external hard drive for my Lightroom library and I notice that all the images shown on there are DNG. On my MAC hard drive I have images shown as NEF. I desperately need to free up space on my hard drive, can I safely delete these NEFs?

    dj_paige wrote:
    however, I do point out that obtaining an additional hard drive and not throwing anything away seems a preferable solution to me.
    heidie22, dj_paige has a very good point there. I would not through away the NEF files; I would archive them to a external drive.
    By the way, I am assuming that converting RAW files to DNG is a decision you have made and not an accident.

  • I was trying to back up my mac by using my external hard drive.  Without realizing it, time machine erased all my backups from my other computers.  Is there any way to recover these files?  I can't even get the external hard  drive to work on my pc.

    I was trying to use my external hard drive to back up my mac computer.  It had files on it from my pc computer.  Time machine erased all my existing files. (I thought it was only going to erase the duplicate files and rewrite them).  Is there anyway to recover these files from my external hard drive.  My mac has renamed the hard drive time maching and it will no longer show up on my pc.  What can I do?

    Yes, the Old Master file has a folder for each year where I find all photos from that specific year. I am attaching a screen shot of the file.
    In the meantime i have managed to download all photos (it did not download any video files though in mpg, avi, 3gp, m4v,mp4 and mov format) to a new iphoto library. Unfortunately the photos are quite mixed and often doubled up. I ma considering to purchase iphoto library which checks all duplicates in iphoto. this will save me a lot of time. What do you think?

  • I just got a new mac and use my external hard drive to save all my images to but whenever I go to save my photo to my hard drive it says I do not have write access....Whats wrong how do i fix this or do i need a new hard drive??

    I just got a new mac and use my external hard drive to save all my images to but whenever I go to save my photo to my hard drive it says I do not have write access....Whats wrong how do i fix this or do i need a new hard drive??@

    This is a Mac question not a Photoshop question, and I am a Windows users, but I can Google and this might be what you need to do:
    http://www.makeuseof.com/answers/change-read-permision-external-hard-drive-mac/

  • I use an external hard drive as a Time Machine back up, but I want to use another external hard drive to save movies, photos on it, but it won't give me the option to save anything on the new external hard drive. Nothing is wrong with the external hard.

    I use an external hard drive as a Time Machine back up, but I want to use another external hard drive to save movies, photos on it, but it won't give me the option to save anything on the new external hard drive. Nothing is wrong with the external hard. 

    Hi Clarkett99,
    To use an external hard drive for your iTunes library, see the steps in this article -
    iTunes: Back up your iTunes library by copying to an external hard drive
    http://support.apple.com/kb/HT1751
    iPhoto can be used in a similar way, follow the steps in this previous discussion -
    how do I save photos and their albums...: Apple Support Communities
    https://discussions.apple.com/thread/3744259
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • Is it possible to use an external hard drive for time machine backup and also as a regular hard drive?

    Is it possible to use an external hard drive for time machine backup and also as a regular hard drive?

    I am using an external drive in the exact way that you described. You just keep it plugged in to the computer when you want to access the movies and files. In order to put files on it, just go to finder open up the drive under devices and drag and drop files onto the drive. It is just like using a usb drive with a terabyte of space.

Maybe you are looking for