Does an Airport Express v1 from France work in the United Arab Emirates?
I have an Airport Express v1 that I bought in France and worked perfectly while there. I recently moved to Dubai and am having lots of problems with it: either (1) it assign an IP address of 169 with Subnet Mask of 255 and no Router or DNS info, (2) it assigns an IP address of 94 with subnet mask, router and DNS info, or (3) no IP address is assigned. In the first case with 169 the internet does not work on the wifi device, in the second case with the 94 address it does... however in all cases the signal is inconsistent so that the 169 could turn into a 94 and suddenly start working, or more likely it drops to a 169 and I lose connectivity.
I've done a factory reset but this did not help. I'm not using another router - just plugging the express into a wall and connecting it via ethernet cable directly into the wall jack. The only thing I noticed is that the country selection for the express only has European countries, and I cannot select United Arab Emirates, but not sure if this is causing the problem. I don't want to spend money on another device if it's not going to fix the problem, but I can't understand what's causing the issue. I contacted my ISP and they had no clue.
I hope someone on this forum can help!
MoHasanie wrote:
...If i buy an iphone from the UAE can I get the facetime app and install it on my iphone once i'm there? ...
No.
Similar Messages
-
Can I buy a MacBook Pro from the United Arab Emirates Store Online and ship it to me in Saudi Arabia by Armax ?
Fahd Alghazi,
have you tried contacting them directly to see if they would do that? -
Why does my airport express 2.4 stop working
I have my network wireless using the Airport Extreme Base station and extended by an Airport Express.
The 5Ghz band tends to work fine, but not all my devices support it so I rely heavily on the 2.4ghz radio.
that radio tends to fail about every other day. It just stops working.
The airport express light stays green, but has zero throughput.
The 2.4 from the Airport Base station fails too.
The only way I can get it working again is to reset the base station. Even then, it only works for a short period of time.
I checked to be sure nothing else was on the same frequency and have tried different frequencies/channels. No luck.
Please help?I agree with John, this sounds like very classic interference.
Luckily, there are things that can be done to get around it. For instance, keeping your Airport away from other sources of interference: cordless phone cradles are the really nefarious ones, but satellite receivers tend to cause really unfortunate issues in the 2.4GHz range as well. If you have either of those nearby, try to get the Airport and these devices as far away from each other as possible.
Also, if you have 5+ other wifi networks in your area, these can also be scrambling your 2.4 signal. Try using Airport Utility to change your radio channel:
Version 5.5.3: Applications> Utilities> Airport Utility> Click on Airport device > Manual Setup> Wireless. Where it says Radio Channel, experiment with channels 3 and 9. Click 'update' after changing the channel.
Version 6: Same channels, but path is Applications> Utilities> Airport Utility> Click on Airport device > Edit> Wireless> Wireless Options -
Does the new Map app under iOS6 not offer driving directions in the United Arab Emirates?
When I want the app to give me driving directions between two locations in Dubai, the app displays "Directions Not Avaiulable".
I sued the Google Maps app a lot under iOS5 for driving directions. Now I am literally often lost ....Hi,
You are here on a user-to-user message board and not in contact with apple representatives. If you have complains to do I suggest you do so through the feedback tool on apple.com
Regards -
Does any Body know how we can solve this problem ...
The new map in the ios 6 in the united Arab Emirates cant find all locations , and Route directions is not available ... does any body know how to solve this ??
as the map before this was working ??Thanks for your interest.
Excuse my ignorance as I'm not sure what you meant by "1 of 5" optimization. Did you mean median of 5 ?
Regarding swapping pointers, yes it is common sense and rather common among programmers to swap pointers instead of swapping large data types, at the small price of indirect access to the actual data through the pointers.
However, there is a rather unobvious and quite terrible side effect of using this trick. After the pointer array is sorted, sequential (sorted) access to the actual data throughout the remaining of the program will suffer heavily because of cache misses.
Memory is being accessed randomly because the pointers still point to the unsorted data causing many many cache misses, which will render the program itself slow, although the sort was fast!!.
Multi-threaded qsort is a good idea in principle and easy to implement obviously because qsort itself is recursive. The thing is Multi-threaded qsort is actually just stealing CPU time from other cores that might be busy running other apps, this might slow
down other apps, which might not be ideal for servers. The thing researchers usually try to do is to do the improvement in the algorithm it self.
I Will try to look at your sorting code, lets see if I can compile it. -
hi, i am an iphone4 user from the United Arab Emirates. I got my phone as a gift last September and it was not bundled with any carriers and was a factory unlocked piece. Within one month of usage the home button started misfunctioning. It started registering double clicks as single, triple clicks, etc. (the usual complaint of many countless users of iphone from the time of the release.) I then kind of ignored this problem and continued using the phone.
With this problem still continuing, comes another one.
My friend gave me a call yesterday, and we were talking happily for a minute or so and suddenly without any reason my friend failed to hear me. Five minutes was spent trying to make myself heard to him. I tried and i tried and the only solution i could find was tapping the phone gently,but firmly. Then he was able to hear me but then after sometime it was back to the same problem.
The only solution i found was to tap in th sides.(please note that this is also a common problem with many who have call problems but no voice memo problems.) I tried adding and registering my device to my account but when i try to put in my iphone's serial number,they say that the device number is invalid.
Now i want to get a solution to this, but since this was a gift piece i do not have any invoice of any sort. I even checked itunes.com/support and was happy to find i still have warranty till september.
I am confused as to what to do as I was dissappointed to find even a single apple store in the UAE and do not know what do we get in terms of support. Could someone please help me?that is exactly the problem. I have no idea as in where this phone originates from. It was gifted to my Dad from a personnel who he was supplying for in the company. My dad then gifted it to me on my birthday. I asked my dad about the phone but he also does not know a thing. He also said that the other guy must have taken the invoice with him as he did not give anything to my dad.
I checked it in quite a few places (like SharafDG,eMax,Axiom etc., the local electronics suppliers) to track where this phone was originally purchased from( because these people usually take down the IMEI's of the electronic devices they sell), but they all could not help me.
Now i have no idea what to do and i do not want to spend huge amounts of cash for this matter as i am already in the warranty period. Anyways,thanks for your help in advance, but it would be helpful if you could try to get this solved for me. -
FaceTime feature is not available on brand new iphone 5 from Dubai, United Arab Emirates (UAE)
We got a brand new iphone 5 from Dubai, United Arab Emirates (UAE). We are living in Italy and we are trying to setup the FaceTime on brand new iphone 5 but to no avail. Is there a way to enable the FaceTime features?
Can Apple or the carrier are capable of doing it?FaceTime
http://support.apple.com/kb/ts3367
"If FaceTime is not available in Settings: Note that FaceTime may not be available on devices purchased or used in certain countries, including Saudi Arabia and the United Arab Emirates."
Unfortunately that device does not have FaceTime. -
Which version of the iphone 5 works with united arab emirates LTE network
The version sold in canada or the one sold in europe,which one is more likely to work with LTE network in the united arab emirates?
hi
it should be GSM model A1429 -
I have Netgear DG834G router only for dsl connectivity wifi connectivity to that router is off. i have connected netgear that provides adsl connectivity to the (Shakeel's Airport Extreme) Airport Extreme dual band Wireless N 5th generation via cat 5 cable so airport extreme is the main wifi device through which i get wifi signals at my home. now our house is big and i have installed the adsl netgear modem and airport extreme router at the same place in my room in the upper story but the signals are weak even in the upper story at the other end of the house so i have installed the new airport express dual band wireless N in the upper story (Kafeel's airport express) and it is connected to the primary airport extreme (Shakeel's Airport Extreme) wireless router in range extention mode it repeats the same ssid. Our ground floor has another airport express dual band wireless N the new one ( Lounge's airport express) signal was weak there so i installed another airport express (Lounge's Airport Express) their and configured it to extend the range of primary router airport extreme (Shakeel's Airport Extreme) in the upperstory with the same ssid. Now the problem i am facing that sometimes lounge's airport express connects to kafeel's airport express instead of connecting to the airport extreme and the signals in lounge are weak because all the devices are connected to kafeels airport express and does not connect to lounge air port express. but when lounge airport express is connected to primary router airport extreme then everything works fine devices connect to lounge airport express and signals are full. i have took pictures of the problem i am facing you will understand better by having a look at it. In normal working setup both the airport expresses are connected to airport extreme which is shown in this picture
The second picture shows when lounge airport express is connected to kafeels airport express and not the airport extreme (Shakeel's Airport Extreme) this is the problem.
isnt there a way to correct this so that they dont connect with each other and connect to the airport extreme ?Lounge's AirPort Express must be located signficantly closer to Shakeel's AirPort Extreme than it is to Kafeel's AirPort Express, and there must be fewer obstructions in the signal path than the other possible connection.
The reason is that if you want Lounge's AirPort Express to connect to Shakeel's AirPort Extreme, it must receive a significantly stronger wireless signal from Shakeel's AirPort Extreme than it does from Kafeel's AirPort Express. -
Why does my airport express keep cutting out?
Why does my airport express keep cutting out?
I have a 1st gen Airport Express and use it to stream music from my PC, iPhone 4, iPad and iPod Touch. My Airport Express is connected to a Teac UD-H01 DAC via an optical cable which is connected to an amp and speakers. I had no problems at all with this set up until I upgraded the Airport Express firmware to 7.6.3. The sound then started to drop out frequently. To cut a long story short after various testing, the problem had to be the Airport Express. I called Apple support but they were not much help and couldn't fix the problem and said they would speak to engineering and phone back. While I was waiting I decided to have another go to find the problem and opened the airport utility and saw that there was an option to downgrade the firmware. At this point I realised that the problems started about the same time that I upgraded the firmware to 7.6.3 but didn't think at the time that Apple would release a firmware that didn't work. Anyway I downgraded to 7.6.1 and hey presto, everything worked again. A couple of days ago I noticed that firmware 7.6.4 was available and thought I'd give it a go, not good - same problem as 7.6.3. I've downgraded to 7.6.1 again and all is well. Hope this helps.
-
Why have all 3 airport express base stations stopped working, other users are on ipads and BT have checked and improved line but I still have an intermittent/no connection?
You must tell us the whole setup.. what is the main router?? How are the express connected to each other?
On ipad it works ok?? But you are on a computer?? MBP early 2011 running Lion?? That doesn't work.. even if you are right next to the main router??
Plugged in by ethernet does it work??
Have you installed a wireless diagnostic program.. ?? Actually Lion has one installed but hidden I believe.
Later version bought it to the surface.
About Wireless Diagnostics
If you do run Lion please install the 5.6 airport utility as it will give you loads more info on how the units are connected.. and link speeds for extend wireless.
How to load 5.6 into later Lion & ML
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
Leave the package open on the desktop so you can see the file. AirportUtility56.pkg
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. If your Mac refuses to run the software, because it wasn’t downloaded from the Apple store, go to security in preferences and allow other software to work.. this is limitation of trade methinks. You can set back later if you like.
Now drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. in finder, open the new directory, drill down.. applications, utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall version 6 (now 6.3 if you updated) so don't try.. and you cannot or should not run them both at the same time.. although I have had no problems when doing so. -
cannot connect airport express to ipad
I keep receiving the message: "an unexpected error occurred" when I try to connect my Ipad to my airport express. Does anyone have a solution?I could not "see" my Express via my wireless router or via the Airport Utility until I reset it to Factory Settings by unplugging it then holding in the tiny reset button while plugging it back in, waiting for the flashing yellow LED signal before letting go.
Then I set it up to DHCP - "connect to wireless network" and DOWNGRADED the firmware to 7.3.x
I would tell you the exact Firmware but I can no longer "see" the Airport express............ AGAIN or still.....
BUT at least I am listening to music streaming from my MacBook Pro... Hmmm.
I log back into the router (Linksys WRT110) and it no longer shows the Airport Express as a DHCP client AND the Airport utility can no longer "find" any Airport Devices..
So if I don't move, or there are no cosmic events, or maybe my KARMA is effecting the device or my "VIBES" are good, but I'm not sure if will continue to work.. Sure would like to use this little device from hel*.
Since I have had this Airport Express I have spent many hours trying to get it to work.
It works just long enough to fool me and then takes a dump...
Maybe this time?
5 Minute later...
Music was playing. I went into iTunes and switched from Airtunes to Computer speakers. When I tried to switch it back GUESS WHAT?
[An unknown error (-15006) occurred while trying to connect to remote speaker "Airtunes"]
Wonderful Green LED though. Totally useless piece of equipment AFAIK.
Message was edited by: Daniel Shattuck -
Just can't get Airport Express to configure: it worked at my mum's, but not at home!
Hello helpful people,
I am really hoping someone can think of what's going wrong with my set up. I keep getting an error message "an unexpected error occurred, please try again" when i try to do my configuration. I only want it to stream music from my ipad to my stereo. I would really prefer to do the set up only using an ipad, if at all possible.
I was given a shiny new Airport Express for Christmas. As i was staying at my mum's for two weeks, I plugged it into her stereo, and got it working. This was configured to join her existing wifi network, using only my iPad to set it up. The airport utility software was not used, as i didn't know it existed. All worked fine.
It looks as if my router is running WEP. So i gather i need airport utility to configure it. Airport utility says it can't detect a base station anywhere, even when inches away. There don't seem to be any options to get it to work differently.
I have reset and factory reset the device many times.
Some level of wireless access must be working on it, as it appears on my wireless list as a possible "set up airport express base station"
I go through the menus to set it up in the same way as at my mum's: selecting my existing wifi network to add it into, setting up a new base station password, and then watching and waiting.
Among the different resets and re-attempts i have done, it varies slightly in behaviour: the last time it failed it didn't get as far as asking for my wifi password.
After the error message i can't "try again" as suggested. It wipes out my wifi access, so i need to delete my existing wifi network (on the ipad) and re-add it to get an internet connection back again. I need to do a reset to get the "configure new base station" message back.
The differences between the two houses:
The stereo connection is different in the two houses: single 3.5mm jack into mum's; 3.5mm jack split into two needed for our stereo. I know it says you need to plug into the stereo first (and I have), but surely the device doesn't care which cable i use?
At my house, the wireless router and airport box are within 4m of each other. At my mother's it's more like 20m.
My wireless router is from O2 (now Sky), my mother's is plusnet.It looks as if my router is running WEP.
Virtually no security at all there, as there are numerous free utilities available on the Internet that will crack a WEP network in seconds. You might as well run the network wide open, since WEP offers about the same level of protection.
You will not be able to configure the Express using an iPhone, iPad, or any version of AirPort Utility that is 6.x or higher with your router set to use WEP "security". They will not work with WEP, since it is so long out of date and non-secure.
An older version of AirPort Utility 5.x might allow you to configure the Express using WEP security, but with no protection anyway, this would be of little value.
See if your router can be configured to use WPA2 Personal security or WPA/WPA2 Personal security. If it can, then you will be able to use an iPhone, iPad, or any version of AirPort Utility to configure the Express in just a few minutes.
If your router cannot be configured to use stronger current WPA settings, now might be a very good time to ask your service provider for a new router. -
Why does my Airport Express say "self assigned IP address"? No IP address for the ethernet, and it is not connecting to my cable router any longer...
Some cable providers.....like mine, a well known company......seem to take anywhere from a few moments to sometimes up to 30 minutes to allow their equipment back at the cable company to fully reset and issue a new fresh connection.
So, it would not hurt to leave things powered down for 15-20 minutes or more when you perform the reset that John Galt suggests. -
I have Ethernet in the house and an Wifi that do not cover the whole house. I do not get it to work. I have tried to get it into my network and it get connected via the WiFi but not the Ethernet. Also when it gives a green light I cannot see that it is giving any signals to my devices (iPhone etc).
You need to pay attention to something, while extending your network with the latest AirPort Express upgrade, your devices will be connected to it except your iPhone, you'll see your iPhone always connected to the capsule instead, even if you're at 1 foot from the AirPort Express.
You need to change the radio settings from automatic to 802.11a - 802.11b/g on your capsule, then I put it back to the default settings...
Now in the AirPort utility you should see your iPhone connected to the AirPort
Maybe you are looking for
-
Flash player not working ie10 windows 8 pro 32
flash player not working ie10 windows 8 Default web browser IE10 does not play flash in metro nor in desktop mode on up-to-date W8pro32 laptop error message "you have to install flash player" but I cannot (re-)install latest version of flash player e
-
Mac Book Pro 13" Garbled Display Issue
I got a Mac Book Pro 13" inches a couple of weeks ago, and this morning the first time I turned it on it displayed garbled graphics. It seems not be a GPU problem as I have connected an external monitor and it works perfectly fine. I have opened and
-
We are having trouble finding a lot of documentation around configuring the Funnel chart. Specifcally, we would like to know if there's an option to be able to place the lengend title on the actual Funnel layer. Also, we would like to be able to co
-
PSA deletion -clarification regarding QM status
Hi Guru's We r on BI 7.0 SP13. We are loading HR data with full loads via infopackages to PSA and subsequently from PSA to infocubes via DTP. We have configured a process chain to delete the PSA requests which are 1 day old in order to make sure that
-
Export for older version of FCP and QT
I exported a Motion project to a QT file for a client in the DV format and they are unable to open it. I know they have an older version of FCP and QT so is there a way I can save it differently, maybe in Compressor? I am using FCP 6.0.2 and QT 7.3.1