Does an airport extreme running 7.5.2 do dhcp to wired clients?

Thanks. I assumed that they did.

Hi there,
in my case it is not in Bridged mode but in Access Point mode; it does not extend any already existing wieless network. It does act as a DHCP server for the wireless clients, but I won't provide ip addresses to wired devices. Is this a normal behaviour?
The thing is that I'm having troubles with Apple's Wake on Demand, and I think that the culprit is my AE not registering my wired Mac mini.
I would appreciate your helps. Thanks in advance!

Similar Messages

Why does my airport extreme not recognize my cable modem anymore?

Why does my airport extreme not recognize my cable modem anymore?

Have you tried resetting the modem? Power it down and let it rest a moment, then power it back up again.
Also, some ISPs require physically detaching their cable from the modem for it to be fully reset. Literally unscrew it from the modem. Try that, in conjunction with powering it down.
Don't do anything with your Extreme, other than powering it down too, in the event the modem reset does not help. Reconfiguring it may be necessary but this is not justified quite yet.

Does the Airport extreme provide any sort of usage reporting? Either per user or aggregate usage of the broadband port

Does the Airport extreme provide any sort of usage reporting? Either per user or aggregate usage of the broadband port

No. You may be able to retrieve that information from your ISP.

Does the Airport Extreme support HP cp1025? There are two versions of the printer the cp1025 and cp1025nw. I have the cp1025, and can't set it up. Is there a list of AE/bonjour supported printers?

Does the Airport Extreme support HP cp1025? There are two versions of the printer the cp1025 and cp1025nw. I have the cp1025, and can't set it up.
Is there a list of AE/bonjour supported printers?

Bonjour is a transport protocol. It also provides a means of advertising a printer on a network.
Any list that shows printers that support Bonjour is generally an indication that the printer itself supports this protocol, meaning that when it is connected to the network, you can see it in your default Add Printer browser. In the case of the Airport, it also supports the Bonjour protocol and will advertise any printer that is connected to its USB port. The printer itself does not have to support Bonjour. The Airport performs this function. And like many lists, they are not kept up to date because each vendor releases several new models every quarter or half year.
There are definitely printers that don't work when connected to the USB port of the Airport. And this is more that the printer driver does not support this type of connection, mainly due to the port not supporting bidirectional communications which some printer drivers require. The Canon UFR2 and CAPT drivers are a good example of this limitation. But this is only the Mac drivers. The Windows equivalent drivers work fine when the printer is connected to the USB port.
So with you having an issue with the Windows drivers then I don't think it is a case of them not supporting Bonjour but more to do with some other component not functioning when the printer is shared by the Airport. The error message appears to have more to do with local user rights which is probably driver related. I've seen some printers that you cannot use the Windows Add Printer wizard to add them. Instead you have to use the vendors utility because of some proprietary protocol being used. Maybe this is one of those?
Now that you seen how it should work based on when you used the C3188, if you still get that error message at point 6 of adding the C1025 then it would suggest a driver compatibility issue with the Airport - which is not necessarily a Bonjour compatibility issue. So unless there was another model of HP printer driver that you could use to this C1025 and that was also compatible with the USB port of the Airport Extreme, then I would suggest your best action is to replace the printer with a model that does work. Maybe even one that has builtin wireless so you don't have to use the USB port of the Airport.

AIRPORT EXTREME RUNNING EXTREMELY SLOW., AIRPORT EXTREME RUNNING EXTREMELY SLOW.

why is a brand new airport extreme running extremely slow. Worked fine before the firmware update.

I nearly fainted when I just read your post. I bought the new airport extreme on June 24, 2011, just as the store was closing -- 8:45 PM. At home it worked well right out of the box, but the next morning it has been nothing but trouble. I wracked my brain to figure out what could change overnight, and your suggestion that it was updated by firmware is logical. Oddly, it works well with my desktop, which is less than two feet away (I don't use ethernet), but in the next room over it is fast only sporadically. I replaced the prior extreme because it suddenly quit, and the genius spent some time diagnosing it and concluded it no longer worked.

Does Apple Airport Extreme work on 220 as well as 110 volts?

Does Apple Airport Extreme work on 220 as well as 110 volts?

The AirPort Extreme operates on 100-240 Volts and 50/60 Hz, so it will work just about anywhere in the world if you have the right AC wall adapter. A voltage converter is not needed.
However, wireless standards are different in different countries, so you may not be able to use certain channels legally in some countries. The document below illustrates what wireless channels are authorized in various regions.
http://en.wikipedia.org/wiki/List_of_WLAN_channels

Does the Airport Extreme support Port Fowarding?

I'm trying to get the remote access for my HP Media Server running through my airport extreme.

of course it does. Read the help documents for more information.
open the airport utility application that should have been installed from the disc that came with the device. Then click the help menu item and pull down to airport help.

Best configuration for Time Capsule & Airport Extreme running one wireless network?

We just moved to a house that does not have Ethernet pre-wired so I've had to re-setup the wireless network in a different configuration and it seems we're experiencing deteriorated wireless signal for devices like laptops. It will work perfectly fine (and fast! wheee!!!) but then it will slow to a crawl and mostly timeout. before I reset everything and start from scratch, I'd like some help. As an FYI, when connected via Ethernet to either of these, Internet is blazingly fast… so my problem here is the Wireless portion.
As some background, here is how we had the network set up in the previous house which was working great (although it was wired for Ethernet which made things A LOT easier):
Airport Extreme (4th Generation)
Wireless Mode: Create a Wireless Network
Internet Facing (Connected to the Cable Modem)
Location: Upstairs Utility Closet (with Smartbox and cable modem)
Time Capsule (1st Generation)
Wireless Mode: Extend a Wireless Network
Joined to existing network above, but also connected to the Ethernet jack
Location: Upstairs Office
Here is the current set up we have running:
Time Capsule (1st Generation)
Wireless Mode: Create a Wireless Network
Internet Facing (Connected to the Cable Modem)
Radio Mode: 802.11n (b/g compatible)
Location: Upstairs Office
Airport Extreme (4th Generation)
Wireless Mode: Extend a Wireless Network
Joined to existing network above with NO incoming Ethernet connection
Location: Downstairs Family Room
My understanding is that the Airport Extreme should pick up and relay the signal downstairs, as well as provide the router for the devices downstairs that need Ethernet (TiVo, Apple TV, etc).
So, my question is (and thank you in advance for helping me sort this out!), what would be the best configuration to optimize the Wireless performance in the house?
Also, for whichever device is the one picking up the existing network and providing the router capabilities for the Tivo and such, is it possible for it to pick up but not rebroadcast the signal? I think in this new house we may have a good enough signal from the office, without the need to rebroadcast it. My theory is that in this house, they are too close together and interfere with each other and/or devices aren't sure which to choose so they bounce back and forth endlessly. Again, just a theory.
Many thanks again for your help! If I've left out any information, please ask and I can provide.

Should they be running on the same channel (as with the "Extend" option previously? Or just both on Automatic channels?
I would recommend the Automatic setting on both devices because this will allow each router to scan and choose an open channel automatically. If you want to set the channels manually, keep them separated by at least 4-5 channels. You would not want to ever use the same channel for both devices in this type of "roaming" setup.
Is there a way to limit bandwidth per device (or action) so that it doesn't monopolize the network and keep other devices from using it?
Nothing that I am aware of. It sounds like you have some young users who are likely visiting Bit Torrent sites, which will really gobble up the bandwidth with big, heavy downloads. The Time Machine has to back up the same files again when it makes the next pass, so that clogs things up again.
Backups would go 3-5 times faster, on average, if the computer(s) could connect using Ethernet, but I understand that wires are not cool with the younger crowd.
should BOTH the TC and AE be set up in Bridge mode?
The AirPort Extreme should be set up in Bridge Mode.
The Time Capsule...it depends. If the TC is connected to a simple cable modem...then the correct setting for Connection Sharing would be "Share a public IP address" on the TC. That is because a simple modem has only 1 IP address to deliver. The TC takes that address and "shares" it with other devices by setting up a local network for all your other devices.
If the TC is connected to a gateway....a combination modem/router in the same box that usually has 3-4 Ethernet ports on the device....then that device would be considered the main router on the network and the TC would be configured in Bridge Mode in that case to function correctly on the network.

Does new Airport Extreme slow down when used with Airport Express?

Maybe this is self-evident.
If get the new Airport extreme and use an old airport express to extend it, will signal slow down to the old speed?
Does the AE have a greater range? Perhaps I don't need the Express to extend.
I live in NYC and there are so many signals in the air. It seems like having the additional airport helps keep me connected.
Thanks.

The airport express is g technology not n technology, so it will be at least as slow as your old network. Also, I'm not sure but I think the the range will be a bit longer than with the old g system, but does not have the full potential of an n system.
I've set up my new system but none of my machines are n capable. I extended the system using my old expresses. The speed of the system is no greater than what it was before the n.
I bought the system to upgrade my technology because everytime my Applecare runs out, I get a new computer which isn't too far down the road. I've purchased an Apple TV which will also work better with the n technology when I upgrade. It's either buy it now or buy it later. I'm also hoping that some third party like Belkin will develop a PCIX card to provide n technology to those of my computers that aren't currently n capable. I'm sure there is many like me out there.

Does the Airport Extreme work w/Time Capsule (as prior info. said?)

Seems to me that any person contemplating the purchase of a new Airport Extreme should at least be able to see both what it is and is not capable of doing... Time Machine does not support a properly mounted Airport Extreme disk. Period. Unless this is the darker side of the product-- or lest this technical incompatibility is found to be "inappropriate" subject matter, I see no reason why this is not a valid technical question to be answered by Apple.
Why does the AE not fully support the feature-set of Leopard? Time Machine incompatibility is a serious and costly issue for all of us who bought AE's just weeks prior to Leopard's release...
Apple did indeed state (prior to release), that Leopard and Time Machine would fully support the Airport Extreme's disk-mounting feature. This is no longer the case, however, and it seems that Apple simply does not want this subject to be brought to light... This is a technical problem that can (and should) be solved via new software for the AE, or within Leopard itself.
I have been told to "call Customer Relations about this instead"-- however, no phone number was provided. In my experience, that department has proven to be incredibly difficult to connect with via Tech. Support. Why can't this issue be addressed here? Technical. Software. Hardware. Leopard.

Kevin Brening wrote:
Just because this issue can't be solved, does not justify pulling the post from this forum-- as this information is vital to absolutely anyone who is contemplating the purchase of an Airport Extreme.
Actually it does. If you rant about a feature missing or spam the forum (which you did both) it will be removed. Read the Terms of Use you agreed to when you signed up:
+1) Stay on topic. Apple Discussions is here to help people use Apple products and technologies more effectively. Unless otherwise noted, do not add Submissions about nontechnical topics, including:+
+1. Speculations or rumors about unannounced products.+
+2. Discussions of Apple policies or procedures or speculation on Apple decisions.+
+2) Be polite. Everyone should feel comfortable reading Submissions and participating in discussions. Apple will not tolerate flames or other inappropriate statements, material, or links. Most often, a "flame" is simply a statement that is taunting and thus arbitrarily inflammatory. However, this also includes those which are libelous, defamatory, indecent, harmful, harassing, intimidating, threatening, hateful, objectionable, discriminatory, abusive, vulgar, obscene, pornographic, sexually explicit, or offensive in a sexual, racial, cultural, or ethnic context.+
+3) Post constructive comments and questions. Unless otherwise noted, your Submission should either be a technical support question or a technical support answer. If your Submission contains the phrase “I’m sorry for the rant, but…” you are likely in violation of this policy.+
This is a technical incompatibility, and as such, has a valid place in this forum.
Not really. Its a missing feature, not an incompatibility. Incompatibilities are things that a product should be able to do but can not due to conflicts. The AEBS was never compatible with the retail version of Time Machine, nor was it every said to be compatible with the retail version so its is a missing feature.
Message was edited by: Ansuz82

Airport Extreme runs on same frequency as my wireless phones

My wireless phones run on the dame frequency as the AirPort Extreme Base Station. I would like to be able to connect to the internet wirelessly but this seems to be a problem with the AirPort. Are there any subsitutes that would be compatible with my Powerbook G4?

reasonabledoubt, Welcome to the discussion area!
You will need to replace your phones with ones that operate at a different frequency.

Airport Extreme runs slow on iMac desktop but twice as fast on MacBook Pro - how can I improve upload speed on iMac?

I have already done a complete clean of the iMac, to no avail. Have read the recommendations for adjusting chaneels, etc and I've done that too. The iMac has clear line of sight and is 20 feet away distance from Airport Extreme. My MacBook Pro runs very fast at 68 download speed off this same airport unit even when on a different floor, near phones and typical interference, etc. the iMac runs only at about 20 at best. Any ideas for how to improve this? I would need specific step-by-steps since I am clearly not an expert.

The Airport Extreme model number is A1301. I am unsure how to locate the Radio Mode setting.... can you advise?
Ok you have a 3rd generation 802.11n AirPort Extreme Base Station (AEBSn) that is capable of providing a simultaneous dual-band Wi-Fi networks. By default, the Radio Mode is set to "Automatic." Which means that it will support 802.11b/g/n wireless clients on the 2.4 GHz band and 802.11a/n clients on the 5 GHz band.
Your wife's iMac, on the other hand, only supports wireless as a 802.11b/g client. That means it is only capable of connecting with a maximum bandwidth (speed) of 54 Mbps.
Any time a non-802.11n client connects to a 802.11n network, it basically "slows down" that network for other 802.11n clients like your MacBook Pro. The only option I see at this time to improve bandwidth for both your wife's and your Macs is to consider getting a wireless 802.11n USB adapter for the iMac. A number of vendors sell these. One of them is Other World Computing (OWC). They are inexpensive and should dramatically improve the bandwidth performance for her iMac.

Why does my AirPort Extreme keep shutting off?

My AirPort Extreme keeps shutting off randomly can any one help?
-thanks

More experience leads me to believe the problem is with the new iMac. If I get the network going by turning AirPort Extreme power off, then on, I see a good signal at my iMac. Experience shows the network drops off after several hours. But yesterday I turned the iMac off, and the network remainded up (I could see it on my iPhone and iPad) throughout the night. That's the first time that has happened since I got the new iMac. Never had this issue with the old machine. I transferred all file to the new machine from a Time Machine backup that was up-to-date. Am working with Apple support. They had me do a re-boot of the AirPort and will call back tomorrow AM to learn it did not solve the problem, but turning off the iMac does. Darn.

Why does my Airport Extreme Base Station keep appearing as a Shared device?

After installing 10.5 my Airport Extreme Base Station keeps appearing with a Windows PC icon under the SHARED list in the Finder, and I don't have a hard drive attached. Does anyone know why it's appearing, and how I can make it go away?

Even more weird in my case, I have the Airport Extreme show up twice under Shared. One shows an icon of the actual Airport Extreme which is the one that has the hard drive attached and that works fine. The second is named Airport-Extreme and has an icon like its a PC. lol Not sure what's going on here but if you ask me the first one should be there because that makes sense, but I have no idea why the second one is displayed. Must be some sort of bug.

Why does my airport extreme network crash once each evening around 6 P.M.?

Like clockwork, every darned day, my network crashes with no known cause. I'm with Comcast as my ISP but they seem to have no clue - or won't admit it if they do 1 about my crashes. Every service tech they send out has a different possible remedy, like the likelihood of a switch being activated nearby that causes my network to crash so routinely.
Anyone have any experience like this before?

One of the problems with Air Radar and other utilities like this is that it will not display the signals of cordless phones, security systems and even other "closed" networks around you.
As you know, a "closed" network will not display the name of the wireless signal when you scan looking for networks.
This is a popular feature with many users and you can probably safely bet that there are at least 3-4 other networks around you that Air Radar cannot "see".
Other wireless routers are continuously looking for a good channel to use, so while you may have a "good" channel for a time, in a crowded area, some other router will likely jump on the same channels.
Cordless phones change channels continuously so even if you could "see" their signals...(and you can't with Air Radar)....they are tough to avoid.
Did you try different locations with your AirPort Extreme?
Can something from within my iMac be causing this calamity of networking failure?
Nothing that I know of.
Most wireless networks operate on the 2.4 GHz band. A newer Apple router and also routers from other brands will operate on both the 2.4 GHz and 5 GHz band. There are very few networks using 5 GHz so that might be something to think about. The problem here is that your G4 will likely not work on this frequency.
The other thing to think about is having a professional IT person come out to your house to run some scans using pro equipment. I can't say that this will help, but if Air Radar shows 4-5 other signals, you can bet that the pro equipment will probably display over 20 possible sources of interference in your area.

Does an airport extreme running 7.5.2 do dhcp to wired clients?

Similar Messages

Maybe you are looking for