Does an image entered into the State Button always to become a background image?

-- thus loosing all scaling etc .... must I make the images the exact size for the button or can I add an image somehow without it scaling up and becoming a background image?

While using the fill option for button , you can define the position and fitting for the image.
Thanks,
Sanjit

Similar Messages

SCCM 2012: F8 debug widow not working (At-least not visible) after entering into the "Currently installed Windows 7 Image": F8 works in winPE

F8 debug widow not working (At-least not visible) after entering into the "Currently installed Windows 7 Image"
F8 option turned on in the boot image.
F8 debug window works in Windows PE.
F8 debug window does not show-up on F8 key-press after entering the 'Currently installed Windows 7 Image" all the way to the end of the task sequence.
But after a 'Restart Step' (and if F8 was pressed) the Task Sequence tends to pause indefinitely as if the
F8 debug screen is open in the background.
I am using SCCM 2012 SP1 (CU 1 is
not an option at the moment).
Any ideas as to how I could get the debug F8 option back?

There have been a couple reported occurrences of this (or something similar) to my knowledge with no resolution in the forums. Your best bet may be to open a case with CSS.
Also note that if you were going to do a CU, why would you pick CU1 instead of CU4? And, can I ask why it's not an option out of curiosity?
Jason | http://blog.configmgrftw.com

Images burn into the screen after being there for only a few minutes?

What's wrong with my mac if images burn into the screen after being there for only a few minutes?
I can have an icon, like a folder or something, on my desktop for only a few minutes and then when I move it an image of it will be burned into the screen for another few minutes. Same thing happens with having a webpage open for a few minutes or word document. What part of my computer is malfunctioning and is Apple responsible for repairing it?

Hi,
Does it happen on all desktops applications as well as Modern UI Apps? Since this issue only happened recently, I suspect a newly-installed third party program causes this issue, please check these programs if possible.
We can also boot into clean boot mode, test the issue.
http://support.microsoft.com/KB/929135
Run a virus scan to eliminate some malware\virus
Similiar issue
https://social.technet.microsoft.com/Forums/en-US/125204a0-937e-4bc6-bb60-8fe3244b4514/all-windowsapplications-keep-minimizing-on-their-own-windows-81?forum=w8itprogeneral
Yolanda Zhu
TechNet Community Support

Acrobat/Indesign does not export correct into the selected output intention (eci_iso_coated_v2_300)

I use the CS6 suite with Acrobat XI at windows platform.
When I want to save a file from InDesign as .pdf with output intention eci_iso_coated_v2_300 the result is a .pdf with more than 300% ink coverage.
I tried to transform the result in Acrobat XI into this standard output intention, but also the result has more than 300 % ink coverage.
What is the reason of this bug?
Before with Acrobat X this worked without problems

Hi Rob,
I was told the new way to work would be to draw files via Bridge direct into the InDesign file
and I thought automatically the color would not be changed.
my colourmanagement setting in bridge for the whole CS6 was ECI isocoated_V2_300
The Illustrator file was saved without color profile.
In this test file I used 3 kinds of black: background of pirate in cmyk 79,34 / 72,78 / 59,38 / 79,88 = ink coverage 291 %
DÜSSELPIRATEN in “black” (if you would convert this in the file with the cmyk button it would be the same ink-percentage as before
“e.V.” was set to 100 % k
I set the preferences for Acrobat from InDesign CS6 as pdf X4 with profile eci isocoatedV2_300 in three ways:
no color conversion
convert to profile
convert to profile keeping existing values
in all tree files the pirates background has 322 % ink coverage instead of 291 %
Why does Acrobat convert “black” in the wrong way? If I click in Illustrator on the 4c button to convert the “black” into 4c it is 291% ink
Acrobat should come to the same result with all profiles: iso coated V2 and iso coated V2_300
The same happens also by saving as .pdf X3 or .X1
The minimum what I expect is, that Acrobat reduces ink coverage for black to 300 %
I also made test with the new ECI profiles for laminated prints from 2012.
And with newspaper profiles
In this case the ink coverage comes below 300 %, but only when I choose convert to profile.
And then the 100 % k converts to cmyk, what I don’t want to have with text.
Is there no way to reduce ink coverage below a special percentage without changing Text 100% k
And is there a bug in Acrobat XI with the ECI IsoCoated_V2_300 Profile? For there is no color reduction below 300 % in all conversion settings.
I can’t test this with Acrobat X or IX, for my computers with this software don’t run with CS6 64 bit.
enclosed you find my files
Kind regards
Lutz Hanbueckers
Hanbueckers Werbung GmbH
Brandsackerstr. 5
40764 Langenfeld
P.O. Box 40 02 01
40242 Düsseldorf
Tel. +49 02173 1 09 44 - 0
Fax +49 02173 1 09 44 - 10
[email protected] <mailto:[email protected]>
www.hanbueckers.de
Visit our site
Steady attractive offers!!!
HR Düsseldorf B 26 480
owner Manager: Lutz Hanbueckers
Von: Rob Day [email protected]
Gesendet: Samstag, 2. März 2013 04:26
An: Hanbueckers Werbung
Betreff: acrobat/Indesign does not export correct into the selected output intention (eci_iso_coated_v2_300)
Re: acrobat/Indesign does not export correct into the selected output intention (eci_iso_coated_v2_300)
created by Rob Day <http://forums.adobe.com/people/rob+day> in InDesign - View the full discussion <http://forums.adobe.com/message/5115613#5115613

Sql Query takes too long to enter into the first line

Hi Friends,
I am using SQLServer 2008. I am running the query for fetching the data from database. when i am running first time after executed the "DBCC FREEPROCCACHE" query for clear cache memory, it takes too long (7 to 9 second) to enter into first
line of the stored procedure. After its enter into the first statement of the SP, its fetching the data within a second. I think there is no problem with Sqlquery. Kindly let me know if you know the reason behind this.
Sample Example:
Create Sp Sp_Name
as
Begin
print Getdate()
Sql statements for fetching datas
Print Getdate()
End
In the above example, there is no difference between first date and second date.
Please help me to trouble shooting this problem.
Thanks & Regards,
Rajkumar.R

i am running first time after executed the "DBCC FREEPROCCACHE" query for clear cache memory, it takes too long (7 to 9 second)
Additional to Manoj: A
DBCC FREEPROCCACHE clears the procedure cache, so all store procedure must be newly compilied on the first call.
Olaf Helper
[ Blog] [ Xing] [ MVP]

HT1414 Hello, do you know what I can do when my Iphone is blocked with the apple appearing ? I cannot enter into the phone and I don't know what to do ? Thank you

Hello,
Do you know what I can do when my Iphone is blocked with the apple appearing ?
I cannot enter into the phone and I don't know what to do ?
Thank you for your help
AMGSO

Basics from the manual are restart, reset, and restore.
Have you tried these?

How to Use an Image to Customize the Static Button Widget

Can I just get someone to help me figure out how to use an image to customize the static button widget, please?
I have tried using several different types of images, but none of them seem to actually change the appearance of the button.
Thanks!
Laura
Captivate 5.5

I tried to use the tools within the widget itself - it offers you the opportunity to use an image (see screenshot below).
I also opened it in Flash and tried to replace the images for one of the button styles there w/ my own, but in re-publishing the SWF from there I broke the widget. When I attempted to use the edited widget, there were no customization controls available after I inserted it (see screenshot two below).

Why does the top button always brake why as my screen decided to pop off why is the back of my case bending when I have never dropped it why dose this shity phone keep sending text messages as picture messages this is the worst phone av ever had!!

Why does the top button always brake why as my screen decided to pop off why is the back of my case bending when I have never dropped it why dose this shity phone keep sending text messages as picture messages this is the worst phone av ever had!!

I know a lot of people with iphone 5 and have never heard them complain about top button always brake and screen that decides to pop off or the back of their case is bending.
That sounds like a phone that has been dropped a numerous times.

Proceedure to get the Birthdays and Anniversaries entered into the Contacts

I am using blackberry Z10, OS version 10.3.12243. Please inform the proceedure to get the Birthdays and Anniversaries entered into the Contacts, automatically updated in the Calander.
This updation is now limited to my facebook friends.
Subject Title edited to reflect new topic.

@purnrndu You probably should have started your own thread.
Are you saying you have birthdays entered for contacts and those do not appear in Calendar? If that is the problem, I'm not seeing this problem.
There are numerous issues with the 10.3.1 on the different BB10 models. It is hard to know if this is one of them or not. Are you not having the other issues that users are finding?
As far as a resolution, you might do a backup, then a security wipe, then restore. See if that fixes it.
Another alternative is to do a clean OS install using an autoloader. This is being recommended by other users to resolve the problems users are finding with the upgrade when done OTA or via Link. If you choose this route, don't forget to do a backup first.
- Ira

Placing an image exactly into the page size everrytime, can it be done?

hi,
I know a bit about in design however was wondering:
can I place an image exactly into the page size everrytime so it copies the exact measurements?
helen

Depends on the version of InDesign. Starting in CS3, if memory serves, you can put a frame on the master page and pre-set the fitting parameters, or assign an object style that includes the fitting options.
Anything you place into such a frame would honor the fitting options you set.
Peter

Does iPhoto copy photos into the iPhoto library or move them in?

I moved about 40GB of photos onto my Macbook when I bought it. It looks like iPhoto duplicated them because the iPhoto library is about the same size as the folder in my finder. Does it copy photos into the library rather than move everything?

Would there be anything in iPhoto that it may not have copied?
It will only have imported (and copied) only those things you told it to.
is there anything in iPhoto that won't be somewhere else on my hard drive?
Anything that was imported directly - from a camera, for instance.
Regards
TD

Setting general there is no siri option and siri even does not appear on holding the menu button. Can someone help me!!!! plzz

setting>general there is no siri option and siri even does not appear on holding the menu button. Can someone help me!!!! plzz

Siri is not available for the iPad2, just the New Ipad (3).

After the last update of the iPhone 5.1 sound became low tones specifically entered into the settings and made the maximum sound d, but to no avail there is no update for this problem Haddl Is it possible to delete the Japanese language and take advantage

After the last update of the iPhone 5.1 sound became low tones specifically entered into the settings and made the maximum sound d, but to no avail there is no update for this problem Haddl Is it possible to delete the Japanese language and take advantage of memory storage space
Osmhto tried to solve the problem of low sound we have become we do not hear a tone sounds clearly like the first phone

hello...
I am having the same issue here... just upgraded my 5s to 7.1.1 (never jailbroken - factory unlocked) and then boom... NO Service!!! Searching ... that's it. currently using Smart Telecom Sim... at first it was working for me... after 6-7 hours, it started the No Service issue. I cannot send a text or make a call...
I did the steps you have taken but it is still not working... any updates on your end?

Unable to enter into the sql prompt

hi...
I am upgrading the version 11.1.0.7 tp 11.2.0.1. I am using linux red hat os version 5. After installing components i was unable to enter into the sql promt . the error message is like this.
sp2-1503: unable to initialize oracle call interface
sp2-0152: ORACLE may not be functioning properlyEdited by: 845224 on Mar 28, 2011 3:12 AM

i have mentioned wrong path before... now i have cleared al those and now i am try to start DBUA . It is telling that database is not mounted.
Then i manually tried to start up mount . It is showing the error message like this
ORA-01078: failure in process in system parameters
LRM-00109: could not open parameter filethen if i try to create pfile from spfile it telling the following error.
ORA-01078: failure in process in system parameters
LRM-00109: could not open parameter file

Appointments on the BB Pearl are not entered into the Outlook 2007 Calendar

The issue that I am having is as follows:
Calendar entries created on the BlackBerry Pearl are not being entered into the Outlook 2007 calendar.
Entries created in the Outlook 2007 calendar are being correctly entered into the BlackBerry Pearl calendar.
I have made several attempts to fix the issue including:
Removing and reinstalling the most recent version of the BB Desktop Software.
Deleting all email accounts but 1, removing and re-sending the service books.
Resetting the BlackBerry Pearl back to factory default.
Any suggestions would be appreciated at this point.

Hi and welcome to the forums!
You may have a corrupt Device calendar. Use the following procedure to correct:
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB04950&sliceId=SAL_Pub...
If you need more info please ask! If not please resolve the thread using the options by the Kudos’ star, Just place the check in the Post that answered your question, Thanks
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Does an image entered into the State Button always to become a background image?

Similar Messages

Maybe you are looking for