Does any One has List of MIDP 2.0 Enabled Cell Phones

Does any One has List of MIDP 2.0 Enabled Cell Phones
and from where to Download it
i think the later part is Diff
i need especially for SAGEM,LG,PANASONIC,ALCATEL,ORANGE

Thanks SIR
for that .com but i need the SDK for Sagem,Alcatel,LG
i have got for Simens , Nokia, Moto,Sony
Thanks

Similar Messages

My mail app on I phone 4s crashes every time when i try to open, and i can see it thru the setting general. also phone is overheating and spending battery fast. does any one has some answer on this or same issue? what to do didi any has same issue?

my mail app on I phone 4s crashes every time when i try to open, and i can see it thru the setting>general. also phone is overheating and spending battery fast. does any one has some answer on this or same issue? what to do did any has same issue? if i do an complete phone restore what will hapend ?

You can call Verizon to replace it or go to an applestore to replace it since it won't even power on with multiple chargers.

I need to use sigma plot in my Mac, does any one has a good advise for alternatives. If not, will it be ok to install windows in my mac?

I need to use sigma plot in my Mac, does any one has a good advise for alternatives. If not, will it be ok to install windows in my mac?

See if Deltagraph is still around. We used to use that for plotting scientific data on Macs. I don't know if it is at all transferrable with Sigmaplot if you have a colleague who uses it, but if you're doing this on your own I would look at getting DG vs, doing a dual boot etc.

Does any one has a step by step demo on activities in BPS0?

Hi,
I have followed most of the links on this site but most of them are theorotical.
Does any one have a sample demo of step by step instructions on on the activities in BPS0? i.e. creating business area, planning level, planning functions, etc to the point where users can enter planned data?
Thanks

Hi,
This is the step by step procedure in BPS0 as far as i know.
1.First we create a planning area based on a cube. If we have multiple cubes to refer, we will create a multi planning area. Otherwise, we create standard planning area.
2.If we need to create any variables, we will create them in the planning area.
3.Then we need a planning level which has both characteristics and key figures.
Include whatever characteristics and kfs we want as per the requirement.
4.Create a package for the level. You can restrict the characteristics either in level or in package.
5.Next comes manual planning. Create a MP and layout as per the requirement. This is the place where user is going to plan. To execute the layout, you have to select the package and then execute the layout.
6.These are minimum requirements. Creation of planning functions depends on the requirements.
7.After that we create folder in UPSPM transaction and include the variables that we used if any, and layout, functions etc.
Regards,
Bindu

HT201493 Can't sign in into find my friends on my ipad2. Get following error message" your Apple I'd is valid but this iPad does mot qualify fot the free iCloud service". Does any one has

Can't sign in into find my friends on my ipad2. Get following error message" your Apple I'd is valid but this iPad does mot qualify fot the free iCloud service". Did any one had this problem? Any solutions?

Can't sign in into find my friends on my ipad2. Get following error message" your Apple I'd is valid but this iPad does mot qualify fot the free iCloud service". Did any one had this problem? Any solutions?

Does any one has the Nuance version 9.0.3, 4-ports evaluation license file for share?

try to setup IPCCX8.0 with ASR feature. but do not have Nuance 9 license, I have send the request to Nuance sales. but no reply.

Hi Kevin,
I have the same issue while preparing the CVPI 8.0 training.
The products are no longer available in Nuance Website and no one from the sales answered me !
Any idea ?
Thanks !

Does any one know of an MP3 player that works on Phones?

I'm looking for an MP3 player that works on mobile phones, multi-track player that lists out the songs. I've been using widgets from places like reverb nation, sound cloud, but I can't get them those show up on mobile phones.
Anyone have any suggestions?

These are playlist players which use flash.
To get these to work on iOS devices they need to fallback to HTML5.
The problem is that HTML5 has not been developed enough and there is no cross browser standard.
The JW player attempts to overcome this by using two different versions of the player skin - one for HTML5 and the other for flash.
The one shown on this page uses flash with fallback to HTML5 but I have no idea if it works on the iPhone...
http://www.iwebformusicians.com/Website-Music-Players/XML-Playlist.html
A test version using HTML5 with fallback to flash works in Safari but not with Chrome or Firefox.

I have itunes in windows xp, but my ipod touch has updated version of itunes. Windows xp cannot get updated itunes. I am having difficulties transferring my music into my computer. Does any one have an idea how to do it?

I have itunes in windows xp, but my ipod touch has updated version of itunes. Windows xp cannot get updated itunes. I am having difficulties transferring my music into my computer. Does any one have an idea how to do it?

iTunes 11 is compatible with
Windows System Requirements
PC with a 1GHz Intel or AMD processor and 512MB of RAM
Windows XP Service Pack 2 or later, 32-bit editions of Windows Vista, Windows 7, or Windows 8
Try:
Trouble installing iTunes or QuickTime for Windows

My iphone 4 doesn´t connect thorugh Wi-Fi, apple replaced my phone for a new one and it has the same problem. I have an ipod and it doesn´t have this problem. Does any one know what to do?? Thanks

My iphone 4 doesn´t connect through Wi-Fi, Apple replaced my phone for a new one, but the new one has the same problem. I have an ipod third generation and it doesn´t have this problem. Having compared both working at the same time, the iphone alsways lags behind or doesn´t even connect to the internet via Wi-Fi. Does any one know what to do?? Thanks

Have you ever checked to see if there is an update for your router? If yes, then power off router. Then on iPhone go into settings and do a reset network settings. Power router back on, and try connecting phone to router.

The iBooks page on my iPad2 has locked. I cannot move on the page. I can close the page, and everything else is working fine. Does any one have any ideas for unlocking, resetting, or somehow getting the iBooks page to work? Thank you.

The iBooks page on my iPad2 has locked. I cannot move on the page. I can close the page, and everything else is working fine. THis happened in the middle of a download. Does any one have any ideas for unlocking, resetting, or somehow getting the iBooks page to work? Thank you.

Just re-set the App -
Open the App
Hold down the power button until the slider appears
Hold down the home button (Don't use the slider) Until the App Closes
You might lose your place, but shouldnt be too hard to find it again...

Hello I am on a macbook pro (retina IOS 9) i have installed xcodes and command line tools but codeblocks does not compile, terminal gives this message /Users/MacPc/Desktop/Untitled1: Permission denied      any one has a solution

Hello I am on a macbook pro (retina IOS 9) i have installed xcodes and command line tools but codeblocks does not compile, terminal gives this message /Users/MacPc/Desktop/Untitled1: Permission denied      any one has a solution?? please...

Back up all data before proceeding.
This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
          Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
           ▹ Restart
from the menu bar.

HT5002 I used Inkscape on Linux before moved to Mac. Now I am trying to install it using MacPorts, but libpixman has some problems that has been reported out there. Does any one know how to fix it without the need to use other way than MacPorts?

I used Inkscape on Linux before moved to Mac. Now I am trying to install it
using MacPorts, but libpixman has some problems that has been reported out there.
Does any one know how to fix it without the need to use other way than MacPorts?

Start with this comprehensive troubleshooting article:
https://discussions.apple.com/docs/DOC-3521
Look at this one for possible solutions:
https://discussions.apple.com/docs/DOC-3353
Ciao.

Does any one know about Primary Form Item in OP

Dear all,
Does any one know what is primary form item in payment means bank transfer ?
thanks in advance
regards
Kah kian

Hi,
Country-Specific Fields: China, Korea and Japan
Primary Form Item
This field appears:
1) In the drop-down list that contains all the active primary form items
2) Only if the G/L account determined is a cash flow relevant account
After defining the cash flow line items in the Cash Flow Line Items - Setup window, specify the primary form line item that is assigned to the cash relevant transaction from the APA Cash Flow Assignment window.
Note
You can change the cash flow line item:
1) After the payment is executed, unless the payment is a credit card partial or split payment
2) At a later stage, in the corresponding journal entry or original transaction, unless the transaction has been cancelled
Check if the details and the defination are there under the following path:
Administration Setup Financials Cash Flow Line Items
Kind Regards,
Jitin
SAP Business One Forum Team

Does any one know , how to delete the others in itunes. it takes lot of space

does any one know , how to delete the others in itunes. it takes lot of space, i wanna delete that... Actually what it contains

Those are the data of the installed apps. Don't listen if someone says that it's an iOS, because it is not. On your iPhone, go to general > usage. It will show you all the programs installed on your iPhone. If you click any of them you will see how much of "others" it has (documents and data)
There's no way to delete it if you want to still have those apps. You can reinstal those which has the most "others" but after some time of usage, it will raise again.

Does any one have a sample code for sending email using IMAP ?

Hi
thank you for reading my post
I have tried to use SMTP and because of some problems i could not use it and i must use Imap (authentication required)
here is my SMTP code , does any one know how i can tune it to use Imap , or has a code snippet to send email using Imap ?
thanks
private static void postMail(String[] recipients, String subject, String message,
                         String from) throws MessagingException {
        boolean debug = false;
        class SMTPAuthenticator extends javax.mail.Authenticator
                public PasswordAuthentication getPasswordAuthentication()
                    return new PasswordAuthentication(mail_usrname,mail_password);
        //Set the host smtp address
        Properties props = new Properties();
        FileInputStream fis;
        try {
            System.out.println("Loading property file");
            fis = new FileInputStream(new File("c:/email.properties"));
            props.load(fis);
            System.out.println("property file done");
        } catch (FileNotFoundException e) {
            System.out.println("file not found");
            e.printStackTrace();
        } catch (IOException e) {
            System.out.println("can not read properties file");
            e.printStackTrace();
        /*props.put("mail.smtp.user", mail_usrname);
props.put("mail.smtp.host", smtpHost);
props.put("mail.smtp.port", smtpPort);
props.put("mail.smtp.starttls.enable","true");
props.put("mail.smtp.socketFactory.port", smtpPort);
        // create some properties and get the default Session
        Authenticator auth = new SMTPAuthenticator();
        Session session = Session.getDefaultInstance(props, null);
        session.setDebug(debug);
        // create a message
        Message msg = new MimeMessage(session);
        // set the from and to address
        InternetAddress addressFrom = new InternetAddress(from);
        msg.setFrom(addressFrom);
        InternetAddress[] addressTo = new InternetAddress[recipients.length];
        for (int i = 0; i < recipients.length; i++) {
            addressTo[i] = new InternetAddress(recipients);
msg.setRecipients(Message.RecipientType.TO, addressTo);
// Setting the Subject and Content Type
msg.setSubject(subject);
msg.setContent(message, "text/HTML");
System.out.println(msg.toString());
Transport.send(msg);

Please try this out!!!!!!!!!
You can send emails using Outlook also. You can send email over Microsoft Exchange with this object (or another email server, using IMAP/POP).
Sub SendMailOutlook(aTo, Subject, TextBody, aFrom)
'Create an Outlook object
Dim Outlook 'As New Outlook.Application
Set Outlook = CreateObject("Outlook.Application")
'Create e new message
Dim Message 'As Outlook.MailItem
Set Message = Outlook.CreateItem(olMailItem)
With Message
'You can display the message To debug And see state
'.Display
.Subject = Subject
.Body = TextBody
'Set destination email address
.Recipients.Add (aTo)
'Set sender address If specified.
Const olOriginator = 0
If Len(aFrom) > 0 Then .Recipients.Add(aFrom).Type = olOriginator
'Send the message
.Send
End With
End Sub

Does any One has List of MIDP 2.0 Enabled Cell Phones

Similar Messages

Maybe you are looking for