Does any one know how Fixed Assets links to the Purchasing ledger?
Hi,
Does any one know how Fixed Assets links to the Purchasing ledger? As I have looked high and low and can't find any table mappings or anyway the ledgers link, this is a problem as I am struggling to track an asset back to a Purchase Order.
I have looked at http://etrm.oracle.com with no joy and any help with this would be great.
You would want to try this forum as well:
General EBS Discussion
Similar Messages
-
does any one know how to connect itunes up? when i click on store it always says 'itunes could not connect to the store. Make sure your network connection is active and try again.' if you know how to fix tell me please, please! thanx
Work through all the troubleshooting here: iTunes: Advanced iTunes Store troubleshooting
B-rock -
TS3694 i keep getting error 1015 does any one know how to fix this problem thanks
i keep getting a error 1015 on itunes does any one know how i can fix this problem it would be of much help thank you
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
http://support.apple.com/kb/TS3694#error1015. -
I used Inkscape on Linux before moved to Mac. Now I am trying to install it
using MacPorts, but libpixman has some problems that has been reported out there.
Does any one know how to fix it without the need to use other way than MacPorts?Start with this comprehensive troubleshooting article:
https://discussions.apple.com/docs/DOC-3521
Look at this one for possible solutions:
https://discussions.apple.com/docs/DOC-3353
Ciao. -
Hi I installed a new hard drive in my Mac mini osx lion an when I turn it on I get a flashing file with a question mark. I tried holding command and R keys when turning it on but the recovery fails to work. I can hold the option key at start up and choose my network, then Internet recovery shows up with an arrow pointing up. When I click on the arrow Internet recovery fails and all I get is a globe with a triangle on it with an exclamation mark on it, and under that it says
apple.com/support
-6002F
Does any one know how I can fix this without a recovery disc? ThanksI just want to add to this, in case someone else searches for this error on Apple Support (google doesnt cover apple support.. how clever is that?)
I had the same error. And i had a Computer that had worked, with a SSD drive and 16GB upgrade done by the owner himself.
I tried swapping with a Mechinal Harddrive, no luck.
Kept the Mechanical drive in, and tried with some other Ram, it worked..
So for me this error and after reading the other responses can be boiled down to a Harddrive problem or Ram issue.
It was Ram for me.. -
Does any one know how to set up runbox email with iphone
Does any one know how to set up my runbox email so that I can access it through my i phone?
Per this link, it appears you can access a runbox email account as an IMAP or POP account.
http://www.runbox.com/
Are you currently accessing your runbox email account with the Mail.app or with another email client on your Mac?
If so, you should be able to use the same account settings used when creating the account with the email client on your Mac. If you are accessing the account with an email client on your Mac and you want to keep all server stored mailboxes for the account synchronized with the server with the email client on your Mac and with the iPhone's mail client, you should access the account as an IMAP account with both email clients.
If you are accessing the email account with the Mail.app on your Mac, you can transfer the account settings from your Mac to the iPhone's mail client via the iTunes sync process - which is selected under the Info tab for your iPhone sync preferences with iTunes.
I'm unable to open their support link with a failed to open page error message - looks like they have a scheduled downtime due to server park relocation so I assume this is affecting access to their support link. -
Does any one know how to get my Genius Apple Apps screen to work? Genius is Blank
Does any one know how to get my Genius Apple Apps screen to work? Genius is Blank now regardless of how I enter the option. My upgrades, purchased, featured and searches all work in Apple Apps app. I have checked my settings for a possible fix to no avail. Tried all hand motions to see if they would fix or help and of course they did not. My Genius worked with some real possible apps I might want, now - absolutely nothing. Any solution that is actually possible will be appreciated.
You need to be quite a bit more specific. What exactly is the Desktop manager doing or not doing? You have a Pearl....what model? Look in Options >About and tell us what model you have and what OS it's running. Also, what version of Desktop Manager, OS on your PC, etc.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you! -
Does any one know , how to delete the others in itunes. it takes lot of space
does any one know , how to delete the others in itunes. it takes lot of space, i wanna delete that... Actually what it contains
Those are the data of the installed apps. Don't listen if someone says that it's an iOS, because it is not. On your iPhone, go to general > usage. It will show you all the programs installed on your iPhone. If you click any of them you will see how much of "others" it has (documents and data)
There's no way to delete it if you want to still have those apps. You can reinstal those which has the most "others" but after some time of usage, it will raise again. -
Everytime I press down on down key it opens automator. It doesn't let me delete the app. I don't know what to do, it is very frustating to fill in a chart when I can't use the down key. Does any one know how to disable this short cut?
Are you talking about the Down Arrow key? To my knowledge there is no way to use that key as a shortcut for anything. But look in the Keyboard section of System Preferences and the Keyboard shortcut tab.
-
Does any one know how to execute program in Jump developer desktop
hi,
Does any one know how to execute program in Jump developer desktop,
actually i copied the hello world project from my eclipse workspace to jump
developers workspace and once i run the program it asks for the main class
and then i gave main class as my HelloWorld Class,it generates error as
java.lang.NoSuchMethodError: main
Exception in thread "main"
Can any one help me to come out of this problem.....
Thanks
MRaji solved it,
thanks
MRaj -
Question
In previous versions of Firefox I was able increase the display size on Flickr which remained unless I altered it again. Does any one know how to do this on Firefox 4Make sure that you not run Firefox in (permanent) [[Private Browsing]] mode.
* You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
* To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
* Uncheck: [ ] "Permanent Private Browsing mode"
You can use one of these extensions to adjust the default font size and page zoom on web pages:
* Default FullZoom Level - https://addons.mozilla.org/firefox/addon/6965
* NoSquint - https://addons.mozilla.org/firefox/addon/2592 -
I deleted all my playlist by mistake from itunes. tried copying them to on the go on ipod and thought it would copy it on to my itune but it didn't. does any one know how i can do this without redoing all my playlists. thanks
Are the playlists still on the iPod? If so I can probably cook up a script to read them back into iTunes, or you can check the features of the various tools listed at the end of this user tip to see if you can find one that you want to use.
tt2 -
I can not install new update in Photoshop CC, does any one know, how I can install the new update?
Photoshop CC show me, if I look on "Help" -> Update, there is no update. But my actual license is very old....
I tried it, to do it manual. But there is also some problem.totally agree. at this point i could care less if "apple" supports it. i'm not renting my ipod touch, it's mine. i paid for it. and i'm not asking to do anything illegal with it, all i want is to get rid of this POS ios6 and get back to being able to use my ipod touch the way it was before...working.
-
Does any one know how to Disable/Hide "BCC" from outlook/owa in office 365?
Hi,
Does any one know how to Disable/Hide "BCC" from outlook/owa in office 365?
Thank You.Hi Kavin,
You can try the below steps on the OWA server box,
search for this file name in explorer
File name: "messageoptionsdialog.aspx"
open this file in notepad
search for "chkbcc" you'll find something like this "input type="checkbox" id="chkBcc"
you need to update the LINE BEFORE IT to <td style="visibility:hidden">
Try this and let me now if this worked
Although I've not tried this for the OUTLOOK client, you can try this and check if you need
But this has worked for OWA for one of my client
I'm also not very sure if this can be achieved on all of your outlook users from a server admin point of view, coz this is a client feature and not a user specific active directory attribute.
Thanks & Regards
John Chris -
Does any one know how to communicate with thunderbolt or J.D.Edwards Oneworld?
Hi,
Does any one know how to communicate with thunderbolt or J.D.Edwards Oneworld through LabVIEW ? Do I need to use database connectivity toolkit? Can i do it without it?
ThanksHi Atul,
we have made a application which uses Oneworld. We didn't use the database connectivity tool because we used ODBC and SQL.
We have some VIs to do database connectivity using ODBC functions. So you have to know SQL as language and the ODBC functions. If you do not have this knowledge the database connectivity toolkit will make it easier for you.
Waldemar
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions
Maybe you are looking for
-
Apple remote will no longer connect to itunes on my pc after updating to ios5
my apple remote will not connect to itunes on my pc after updating to ios5 anyone know why.
-
Is it possible to import messages into Mail that are in .csv format?
Just in case my previous topic subject was preventing some folks from checking this out, I'lll try to ask my question in a more generic way. I have an archive of a mailbox from another email program that I'm trying to move over to Apple Mail. My arch
-
Problem with refresh rate (ti4200)
Hello there.. Please help me in my problem.. I have an amd 1200mhz with chaintech motherboard, 512 memory, 350w hec psu.. I have msi geforce4 4200ti 128mb and when I install any of the 40.xx even the latest 31.00 drivers posted by msi, my monitor
-
Error : Transaction header and line tables cannot be empty
please can some one help me. when i want to create an invoice without anuy line, i have the error : Transaction header and line tables cannot be empty . can some one tell me how can i solve this regards.
-
Execute a function in SQL Worksheet
How can I execute a function in SQL Worksheet. The function takes in two parameters of type varchar2 and returns a boolean. the syntax is: set serveroutput on VARIABLE x BOOLEAN; EXECUTE :x := check_number('78','A'); PRINT x ; my error is: SP2-0552: