Does any1 know if the "digital" input on MegaWorks 510D is SP/DIF???
I think the subject line says it all!
Am transfering to using a laptop PC which has an SPDIF (RCA/phono) output and i was wondering if any of you bright people know if the MegaWorks digital mini-jack input is SPDIF?
Thanks folk. R
Sorry, I don't remember for sure. I think Creative may have had two versions for the four conductor plugs, and the original version that was on the Li've/Audigy cards used the fourth band (from the tip) as the ground. I do know that the tip would carry either the front channel output or the S/PDIF output depending upon whether you were sending a decoded or encoded signal out. As I recall though, you could use a monaural two conductor cable if you were sending a S/PDIF encoded bitstream from your source (i.e. your laptop.)
Similar Messages
-
Does anybody know when the InDesign Digital Magazine Workflow is coming out?
Does anybody know when the InDesign Digital Magazine Workflow is coming out?
It was suppose to happen at the end of this summer, but no sign of it....its going to take a while b/c it has to back up the whole ipod
-
How does NI 9411 card convert the digital input pulse given to output rpm?
I am measuring the shaft rpm using the encoder and feeding it to the 9411 card.Can the 9411 card display the shaft rpm? How the card can do this conversion?Should I use any other component to decode the digital input pulse?
Have you tried enough searching, here and there...??
1. Check page # 12 of this manual.
2. How Do I Use a Quadrature Encoder with My Data Acquisition Board?
3. Encoder Measurements: How-To Guide.
Edited:
4. NI 9411 Pinout.
I am not allergic to Kudos, in fact I love Kudos.
Make your LabVIEW experience more CONVENIENT. -
Does anyone know if the new ipad sir, not yet available will have a usb port? This is the only thing that is prevented me from purchasing so far. Doesn't make sense when you can connect to tv.
ggreenlady5.The standard external connection and charge port on all recently-announced (October 2014) models in the US is the Lightning connector, introduced with the iPad 4 in Sept 2012. http://techcrunch.com/2012/09/12/apples-new-lightning-connector-what-it-does-and -doesnt-change/
This includes iPad Air, iPad Air 2, iPad mini, iPad mini 2 with Retina display and iPad mini 3.
https://www.apple.com/ipad/compare/
NOTE: The original iPad (2010), iPad 2 (2011), iPad 3 (early 2012) came with a 30-pin connector, also common to original iPhones and iPods.
Additional adapters are available to connect TV's, cameras, SD memory cards, and similar devices, from many sources, including the Apple Store online. (Adapters are still available for the older iDevices using the 30-pin connector as well)
http://store.apple.com/us/ipad/ipad-accessories/cables-docks
Some common Lightning adapters available from Apple online:
Lightning to USB camera connector with a 'standard' USB cable.
http://store.apple.com/us/product/MD821ZM/A/lightning-to-usb-camera-adapter
Lightning to HDMI adapter (requires an HDMI cable as well as this adapter)
http://store.apple.com/us/product/MD826ZM/A/lightning-digital-av-adapter
Lightning to micro-USB connector
http://store.apple.com/us/product/MD820ZM/A/lightning-to-micro-usb-adapter -
Does anyone know what the difference is in the various dates in LR?
Does anyone know what the differences are between the following:
Date Time Original
Date Time Digitalized
Date Time
I understand that Date Time Original is the capture time and that Date Time is capture time except when the image is a copy of another image that was created using Edit In... So, what is Date Time Digitalized?
Thank you.
BrianThe SOL is 4 years in TX and the DOFD is usually the first time it hits 30 days late and is not brought back current
-
Does anyone know why the waveform peak detect function provides accurately the position of the peaks but not the value?
I have been looking at my data at the position indicated by the function as a peak, and it is correct at that place the wave has its peak, but the value provided by the function is higher than the actual value at that point.
Attachments:
Test.jpg 53 KBThe help makes it clear that the VI will make a quadratic fit to the data, so the locations are not integers (i.e. not aligned with you exact data). From that analysis, the peak is between two of your points, and slightly above the neighboring data.
See the coercion dot. Make the "locations" array DBL (Why did you change it to I64, that makes no sense at all!)
Quote from the help:
"Locations contains the index locations of all peaks or valleys detected in the current block of data. Because the peak detection algorithm uses a quadratic fit to find the peaks, it actually interpolates between the data points. Therefore, the indexes are not integers. In other words, the peaks found are not necessarily actual points in the input data but may be at fractions of an index and at amplitudes not found in the input array."
All clear?
LabVIEW Champion . Do more with less code and in less time . -
how do I share movies/music between my computers. I have opened shared on both computers and both are on, but i am not able to drag anything from one to the other. Does anyone know where the settings button is on the bottom of the itunes screen?
Oops, I forgot a step between 7 and 8 ... before syncing the iPhone I need to explicitly send the document back to iTunes on the iPhone, or the changes won't come over at all ...
and then one more thing ... Numbers on iOS does NOT recognize a number of key features of the OSX app, such as conditional formatting ... so after editing my document on iOS and syncing it back to OSX on my Mac, all of those settings are lost (no more conditional formatting, have to do it all over again)
What am I doing wrong ? -
Does anyone know if the HDMI to DVI Adapter that comes in the Mac Mini box is DVI end male or female? Should I be getting a male to male DVI cable, or will this one work out of the box? Thanks!!
Looking at mine - the DVI end is female.
-
I have a Windows copy of Photoshop Elements 11, but the serial number has been lost. I didn't buy the product and I am unable to find the box. As far as I know, it's never been used so has not been registered. Does anyone know how the serial number can be recovered under these circumstances?
If you never bought the product then you cannot get the serial number.
-
does anyone know how the cutout filter works and is there a way of achieving the same effect without using filters to get more control over final look?
Several ways to get similar results. Image > Adjustments > Posturize with low values similar to what you'd use n Cutout. This is the most flexible way I can think of as you keep the image in RGB mode with layers intact. A more radical approach would be to reduce bit depth using Indexed Colour. You'll need to experiment with settings, try changing Forced to Primaries, and Matte to Foreground Color. There's no going back from this route, although you can change the mode back to RGB to re-enable layers, adjustment layers etc.
A nice thing about the Filter gallery filters is that you can change the layer to a Smart object with all the control that gives you.
Now if only this forum could filter out bizarre content. -
Hiya, I've got a weird problem with my iPhone4. On the 'home page' of my iPhone the mail symbol tells me there's a new mail waiting for me. However, there's no new mail to be found. Does anyone know what the problem is? Thanks
This response is a little late as I just read about your problem. I have a 2012 Dodge Charger and a 2012 Chrysler Town and Country and both worked flawlessly with the iPhone 5s my wife and I had. However, we just upgraded to the iPhone 6 and Uconnect will receive calls but you cannot answer them. You can callout successfully, however. the annoyance being the inability to answer incoming calls in the HandsFree mode.
-
Does anyone know what the "Provision Failure: MEDIATION-5, Lrad! errors are in WCS
Does anyone know what the "Provision Failure: MEDIATION-5, Lrad! errors are in WCS?
I get this when pushing an AP template to six new 3502i series access points. The error reads like this:
*** Apply Result for AP 'NameOfAPhere(C0:FF:EE:C0:F:EE)' ***
**AP Parameters**
Provision Failure: MEDIATION-5, Lrad!C0:FF:EE:C0:F:EE,secondaryMwar,No access
MAC address has been changes to protect the names of the innocent...
The rest of the template appears to push. The 802.11a/n and 802.11b/g/n parameters show "success".
Anyone have the magic decoder ring for what these messages are referring to so that I can go fix the issue?
Thanks in adavance!Hi,
Two things :
1- Can you refresh configs from WLC to WCS and then give it a try ?
2- Is WCS using the right read-write community string for this WLC ?
(Since we see a "No Access" message in the error)
Thanks..Salil -
On my Mac Mini, I keep getting this error message: "iCloud encountered an error while trying to connect to the server". I don't have any problems with iCloud on my laptop / PC. It works fine... Does anyone know what the problem could be?
Your Mac must be on Lion (10.7) to run iCloud. Apple had to change the operating system to fully support it. Nevertheless, it is possible to get emails from iCloud without having Lion. Please tell me if this interests you.
Anyways, here is the link to buy Lion (30 dollars, totally worth the upgrade ): http://itunes.apple.com/be/app/os-x-lion/id444303913?mt=12
Franklin -
Does anyone know when the thunderbolt to firewire cable/adaptor will be available?
Does anyone know when the thunderbolt to firewire cable/adaptor will be available?
Apple said ThunderBolt to FireWire cable/adapter wil be available in July.
http://www.macworld.com/article/1167227/two_new_thunderbolt_cables_join_parade_o f_apple_releases.html -
Does anyone know what the black rectangle about the receiver on the 4S is for? I want to put a screen cover on my phone but don't know if that should be covered or not.
Refer to this article under section 4: Verify that the Apple Mobile Device USB Driver is installed
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Maybe you are looking for
-
Time Machine Backup Is Too Large For Backup Disc NOT
Hi, I have not been able to locate anything to help me with a time machine/time capsule issue I am experiencing. I have a 750 GB internal and a 1tb capsule. I have been using it to back up for well over a year with no real troubles. About three month
-
I have a firefox icon on my task bar. Before this latest install, I would click the icon and Firefox would come up directly. Now it opens another firefox window. I don't want this. How can I change it back?
-
I have OSX 10.7.5. I loaded Powerschool, this sent me to oracle to load java 7, now powerschool won't laod, java 7 logo just spins. I contacted orgacle live help, said it was a mac problem that they could fix for $75. Any help would be wonderful.
-
Using Action Wizard on encrypted files in Acrobat X
I am trying to use the Action Wizard to execute batch commands on encrypted files in Acrobat X but it keeps saying it can't open the document. In Preferences, I have the Security Method set to Password Security under Action Wizard, but it never promp
-
Forgotten serial number for Adobe Photoshop CS6?
Hi, I bought the education edition of Adobe Photoshop CS6 Extended on Amazon (I think) a couple of years ago. I recently did a reset of my PC so everything is wiped and the OS is reinstalled. Now when I insert the CD it asks me for the serial number