Does anybody get USB device 054c:0281, a Sony card reader working?

Hi,
I have a Sony SD/Memstick card reader. Its id is 054c:0281. It is plugged into my laptop's PCI-Express slot. I know it work with Ubuntu. But I do not how to get it to work with Arch. Does anybody have any idea how to set it up?

Perhaps it'd be easier to help if you describe what you've already tried and the problems you have with common methods.
Also what do you mean by "work"? Do you want it to automount? Do you have other media automounting? If so what method did you use? Does this device show up in /dev/ when it is plugged in?

Similar Messages

Does lightning SD card reader work with iPad Mini and iOS7?

I order new iPad Mini Retina and wan to know;
does the lightning SD card read works with iOS7?

Yes.

Get USB device attached to this computer has malfunctioned error message

Hi All, my first post. iPod was working fine and been synching without issue for 2 years. I have recently had a couple of intermittent problems where it gets stuck playing and will not respond to clicking on wheel. However, seemed to be over that but now get USB error when I plug it into PC. ie PC is not recognising the hardware. Have done 4 of the 5 R's (does not register in iTunes so cannot restore). Have read other articles with interest but not seem anything quite the same.
I have been into Device Manager via the USB troubleshooter and tried to force it to load drivers from the installation CD but thinks it does not need any. Feels like I have plugged a potato into the USB socket rather than an IPOD. Got a suspicion that the iPod itself is corrupt and not being recognised by Windows.
Got same result on another PC with iTunes installed.
Any ideas ?
Compaq Deskpro Windows XP iPod 40Gb
Compaq Deskpro Windows XP Pro

Yep - same error messages - looks like it can't find drivers but when I try and get it to search for them on installation disk it says it can't find anything more appropriate than current settings (which btw says does not need any drivers !).
Great so a few of us have the same issue. Does anyone have an answer ? Is there anyway of getting these questions to Apple or did they cut their support costs by replacing tech support with discussion groups.
Compaq Deskpro Windows XP

Getting 'USB device not recognized' message when I never did before.

Hi there
I am constantly getting a USB device not recognized when I plug in my nano. I never got this before and as a result all it does is charge. It is not showing up in iTunes anymore so I cannot remove or dowload new songs on to my nano anymore. I have tried to go into control panel and the USB Hub device manager to deselect the power outage option but that did nothing. Please help! I seem to encounter trouble with any accessories Apple sell, whether they be earphones or USB cables.
Thanks

i'm getting the same problem too.
my ipod is nearly about 1 year old.
i use my ipod nano 2GB for music and as a flashdrive to store my uni work.
this morning accessing my files in the ipod on the computer was fine.
then later in the afternoon when i connected it into a computer i keep getting the msg 'usb device not recognised'. also itunes dont recognise my ipod either anymore.
i use Windows XP at home and uni.
i've tried my ipod on at least three different computers at uni and just tried at home.
same msg came up 'unknown device' from windows.
i've read the other posts in the forum and it mentioned about 5 R's and resetting it.
BUT the main problem is i DONT have any back up of my uni work and files and they are really really important so i CANT reset the ipod otherwise i will lose all the important things...my assignments, projects, photos...I was meant to make a back up b4 i start uni next monday but i guess now is TOO LATE.
I've noticed that the socket of the ipod dock conector to usb cable, that connects to the ipod is slightly split open.
Would this be causing the problem?
I am in Utter Despair and Desperation at the moment.
Can anyone help me PLEASE?
i would be sooooo grateful for your kind help and time.
kind regards,
a student who is on the verge of a breakdown due to this problem.
Windows XP Packard Bell

How to get USB device in the list of VISA resource Name field of VISA Open VI

I have followed the below tutorial to communicate with my device using USB port. But i didn't get the name of the USB port in Measurement & Automation Explorer devices list. How to get it? Can anyone suggest something?
http://zone.ni.com/devzone/cda/tut/p/id/4478
Solved!
Go to Solution.

Hi kimhyun,
I have attempted this.But succeeded.I used pendrive as my USB device.my sugesstion is you don't disconnect your device at any point of your work.Check the device is connected properly.IF your system has recognized your device,you can view the device in control panel>>Device Manager>>Then open your particular device from the list of connected device then Details>>device description>>Hardware Ids>>Then you can find your vendor id there.
Try this.I think your device is loosly connected.Which USB device are you using??Also you must install THE DRIVER OF YOUR USB DEVICE.
GOOD LUCK
Thanks as kudos only

Unable to get USB devices working on VirtualBOX (Puel)

Hello, when I put and USB device on a Windows Virtualbox machine, I always get this error:
Not permitted to open the USB device, check usbfs options
Is there any solution to this problem for arch?
This is my fstab:
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
none /dev/pts devpts defaults 0 0
none /dev/shm tmpfs defaults 0 0
#/dev/cdrom /mnt/cdrom iso9660 ro,user,noauto,unhide 0 0
#/dev/dvd /mnt/dvd udf ro,user,noauto,unhide 0 0
/dev/sda1 / ext3 defaults,noatime 0 1
/dev/sda4 swap swap defaults 0 0
/dev/sda2 /home ext3 defaults,noatime 0 0
none /proc/bus/usb usbfs devgid=102,devmode=666 0 0
and showing you that I'm on the vboxusers group
[davigetto@helena ~]$ cat /etc/group | grep vbox
vboxusers:x:102:davigetto
I also load vboxdrv on rc.conf modules section, so Virtual Machines Works, only USB devices don't work.
Greetings

Hi,
your post is a little bit older. But I have never used USB on a VirtualBox. Yesterday I need to get working it.
I have add this:
none /proc/bus/usb usbfs devgid=<vboxusers-gid>,devmode=664 0 0
to my /etc/fstab and reboot my machine (maybe there is another possibility to get working it without reboot). After that, USB support fully works in the VirtualBox guest system.
Maybe your user isn't in the right groups.
Daniel
Last edited by ise (2007-09-25 06:20:45)

Windows XP does not recognise USB devices after installing itunes 7.2

After downloading itunes 7.2 my PC no longer recognises my ipod nano (2G, 2Gig). Uninstalling itunes 7.2 and reverting to a previous version makes no difference.
On top of this my PC no longer recognises my external USB 2.0 HDD.
Uninstalling and allowing windows to rediscover USB devices \ hubs etc as per MS recomendations has not resolved my problem
Both devices function with no issues when plugged into my laptop.
Any suggestions on how to resolve this will be greatly received!
Many thanks
Justdoit2.

Power down and wait... does not solve the "USB Device Not Recognized" problem in my desktop running XP Professional.
All five USB Root Hubs are stucked. I tried uninstalled them all and let XP to find new devices but afterwards the problem still remains.
By the way, I have a thousand songs stored in the iPod Nano (2nd generation). Will iPod reset erase all my songs?
iPod Nano 8GB Windows XP Pro

My PCI-6503 card does not get a device number

I have a PCI-6503 I/0 card installed and it apperas corret in the Device Manager. In the MAX explorer it is identified as PXI device. But I don't get a device number for it. What can I do?

Marcus;
Very strange. Is the board working properly without the device number?
You can also try to assign a device number to the board. To do that, right click at the board, and choos the Properties option. You can enter the device number there.
Hope this helps.
Filipe

Zen Sleek Photo gets USB DEVICE NOT RECOGNI

I have ZEN Sleek Photo which i use for about a week now.
Today I connected the player to the computer and got
"USB DEVICE NOT RECOGNIZED" window in Win XP
and the Zen Photo froze.
Disconnected it, reset it using a pin, then turn it on and it's "re-building library"
It works good as a player but i can't connect it to the computer.
Tried restarting the computer, restoring the windows to a previous day, connected to all possible USB ports nothing hel
ps.
Hope for an answer
Thanks in advance,
Danny
UPDATE.... PROBLEM SOLVED.. LOOK BELOW.. FRED'S SUGGESTIONMessage Edited by dindia on 07-24-2006 2:49 AM

fred38 wrote:
Hi i had this problem too and the solution was amazingly simple. (I found it by searching on Google for ages!) Turn your pc off and then unplug it from the mains for approximately 30 mins. I know it sounds crazy but apparantly static electricity can cause problems with usb devices particularly if you have your device already plugged in to USB port-Windows forgets its there! After 30 mins plug your pc back in to the mains and voila! your Zen will be recognised again.
2:44 AM : After 30 minutes of trying to fall asleep with no success turned on computer and connected the Zen... Didn't have much expectations, but IT WORKED! IT REALLY DID! WINDOWS FOUND THE DEVICE CORRECTLY AND EVERYTHING IS WORKING NOW!
THANSKS FRED!
Danny

PTCL EVO USB Device Installation and Configuration (EVDO CARD)

*PTCL EVO Installation on MAC Book PRO , Mac Book Air EVO*
Problem:
USB not getting detected on MAC book pro and Mac book Air.
Resolution:
*DO not Insert the EVO CARD until you perform the below:*
*Getting the driver:*
*Option 1 :*
http://ptcl.com.pk/contentb.php?NID=327#drivers
Select the device you have and download MAC driver from the download section on the page.
*Driver Option 2:*
ON windows os insert the EVO device detect the USB disk with drivers one of the driver is for MAC (dmg file) copy it on a simple Flash disk.
*Installation on MAC:*
Double click the downloaded driver (Option 1)
run the setup.
or
on your MAC Insert the Flash Disc on which you copied the driver (Option 2) it will detect a media storage and then run the driver from there. Once you have the driver installed you will see an EVDO Icon in the menu.
*NOW insert the EVDO USB in MAC it will be detected as a modem / network device.*
*TRICKY PART:*
EVO software does not work on MAC so you need to configure a manual connection.
Go to network settings from the top panel under WIFI click advance settings. A new menu opens up you will see 3 or 4 new devices. you need to configure the EVDO Card Terminal only thats the first in the list.
*Do not configure any other device.*
*Config Settings:*
phone number: #777
User: [email protected]
Password: ptcl
*Do not change any other settings.*
Click connect and within seconds it will connect.
It works fast and reliable for all wimax services location is very important it is dependent on the signal strength. EVO is the best choice for people on the go as it works across Pakistan in 350 cities. no other service can match this.
Please note I am not from PTCL or any affiliation with them. Check my website for more details…
+*H A P P Y - S U R F I N G*+

Hey Mark
You didn't happen to change the IOMMU setting in the UEFI did you? I have just got a M5A97 EVO and been having problems.
This UEFI interface finds the usb devices fine but the kernel will not. I found that if I flash the bios it reset things and appears to
just compare the flash if it is the same. Afterwards the usb works. However I still trying to narrow it down myself. I've tested with
0402 0810 & 0813 just released. All do the same thing with regards to usb 2.0.
Jonathan
EDIT:
After testing it appears to be connected to the linux nvidia blob & IOMMU settings conflicting.
Last edited by jeisom (2011-11-23 15:00:00)

Sun Ray - How to get external USB Card Reader working

Dear All,
i have the following problem. Maybe someone could help me or give me a clue to solve it.
SunRay Software 5 installed
Window 2003 R2 TerminalServer
Here my question:
I use a kiosk session with a smart card to conncet to the windows server - works perfect.
Login Screen and go.
Now i have to have to authenticate myself with an external usb card reader and smart
card (connected to the sun ray) to use a certain application on my win2003 server.
Via the windows rdp session (from the laptops) everthing is ok. The information from
the card reader is transferred to the server.
If i use the Sun Ray nothing happens. So here is my problem:
How do get the authentication information from the smart card to the server?
Thanks in advance
Best regards
Hans-Peter

Basically, reinstall the Boot Camp video drivers manually and if that doesn't work then go to the AMD/Radeon website and install the Windows drivers directly for your video card model.
If you want to do a search you will find others that have pretty good luck doing it either way.

Ipod "usb device not recognised" on one computer but works with another!

I have a 60GB ipod video and a 2GB ipod nano. Both connect fine to itunes on my work laptop but will not connect to my home laptop. They have previously worked fine with the home laptop but now when conected the message "usb device not recognised one of the usb devices connected to the computrt has malfunctioned". I have tried reinstalling itunes several times and tried the usual reset of the ipods etc but nothing seems to work.

If you have more then one USB port, try the other port.

USB devices (pendrives, external Hard disk) doesn't work correctly

I have MacBook Pro mid 2010. Recently I update to Mountain Lion. Since that fact, the USB devices doesn't run. I connect the device (I tested whit 5 different pendrives with NTFS, exFAT and HFS), the system recognize it for a few seconds ant then remove it for a nom apparent reason. Someone knows anything about this?

Are you using a USB hub? If you are, try removing it.
I'd try a safe boot Mac OS X: What is Safe Boot, Safe Mode? . Maybe you have some other software installed that is causing the problem.
Try a different USB port.
If none of that helps, I'd reinstall OSX over your current installation with the Combo updater OS X Mountain Lion Update v10.8.5 (Combo)
If that doesn't work, maybe it's a hardware problem.

USB devices on my M30X-118 do not work

i connect usb devices on my M30X-118 and they do not work .I have already check the usb ports from control panel - system - device manager and :they work properly: i do not know what to do. I have do the pc diagnostic tool and the usb ports have passed the test.

Hi
In my opinion it doesnt work because of power supply.
The USB ports dont provide enough power.
Check please this topic and comment from Sandros
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=10384&messageID=37213#37213
If the external USB device has no own power supply so you should use a USB hub with the external power supply.

USB port not able to power card reader

Hi,
I have an eBuyer USB Card Reader which does not power up when I connect it to my Mini Mac. It works fine when connected to my Dell PC. Reading this forum and the Apple documentation it seems that the Mini Mac ports do meet the USB specification, but some devices may need extra power from a powered USB hub.
Does this sound likely? If so, any reccomended hubs?
Thanks, Ian

Hi,
According to the source for OpenJDK 6 (b19) the only way to get the exception you posted was with a PCSCException being thrown with the root exception wrapped in the new exception.
// from PCSCTerminals.list(State state)
try {
// do some stuff to get the reader list
} catch (PCSCException e) {
throw new CardException("list() failed", e);
}If this was not the case in the version you have, you will definitely see the root cause with the new JDK.
Cheers,
Shane

Does anybody get USB device 054c:0281, a Sony card reader working?

Similar Messages

Maybe you are looking for