Does anybody has a CDN491 driver for CVI?

Looking for a friendly interface to this board.

Yes, thank you, i looked into that.  I seem to be having
difficulty contacting them by phone and email however.  I figured
i would try NI and see if anybody has already made a compiled VI.

Similar Messages

  • Does anybody have a LabView driver for an OPOTEK tunable laser?

    I am looking for an already complied and working driver for the OPOTEK Vibrant tunable laser.

    Yes, thank you, i looked into that.  I seem to be having
    difficulty contacting them by phone and email however.  I figured
    i would try NI and see if anybody has already made a compiled VI.

  • Does anybody has a sample bootpd.plist for me?

    Hello all!
    I would like to establish my own DHCP-Server with MAC SL (Client, not the Server Edition). I recently learned that the "bootpd" shipped with MAC OSX is suitable to provide DHCP service.
    Unfortunatly, I could not find any sample config file "/etc/bootpd.plist" which would work as a starting point for me. Some sample which contains at least the basics for a simple DHCP service.
    Does anybody has a working sample for me? A "bootpd.plist" which I can place in "/etc" in order to have at least some working starting point?
    Thx for your help!

    I skipped my plan to set up a DHCP server based on bootpd. It seemed impossible to get a working sample of a bootpd.plist for MAC OSX Snow Leopard (client)
    At the same time it was rather easy to set up a DHCP Server using ISC DHCP Server:
    --> http://www.isc.org/software/dhcp
    It worked almost out of the box.

  • Has anybody got a labview driver for Lecroy 9410 ?

    Has anybody got a labview driver for Lecroy 9410 ?

    Unfortunately I was unable to find a driver for this instrument either. This leaves you with one of a couple options. First, I would like you to submit a request for this driver at:
    http://zone.ni.com/idnet/other.htm
    We develop drivers based on demand and popularity so the more requests we have for it, the greater the possibility that we will develop one.
    If you would like to try developing your own instrument driver (or modify the existing one), we have documentation, model instrument drivers, and driver templates to help at :
    http://zone.ni.com/idnet/development.htm
    We also have a syndicate of third party vendors that specialize in National Instruments' products and services. Some of the vendors specialize in driver development. I would sugges
    t contacting one of the Alliance members at:
    http://www.ni.com/alliance
    If you have any further queries, please let me know

  • IPhone 5S: does anybody has this problem. During a successful voice call all of a sudden people can't hear me while I can hear them

    iPhone 5S: does anybody has this problem. During a successful voice call all of a sudden people can't hear me while I can hear them. Signal is strong and call quality (me hearing the other) is still very good but it looks as if I’m going on mute while I’m not muting my iPhone. When dropping the call and re-dialing it works fine again. It’s a brand new iPhone 5S but it now happened already 4 or 5 times in 2 days.
    It feels like a hardware/iOS problem and not a network issue. It happend with iOS7.03 but I just see 7.0.4 is available so will install that one now.
    Thanks in advance for feedback
    Best regards,
    Marco

    Hello Jeff,
    Thank you for providing so much detail about the issue you are experiencing with the audio on your iPhone.  I would be concerned too if the audio on my iPhone was not working unless using speaker phone.  I found an article with some steps to take when you are experiencing issues like this:
    iPhone: Can't hear through the receiver or speaker
    http://support.apple.com/kb/TS1630
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Does anybody has the 0D_DECU csv file (Democube)?

    Hi all,
    Does anybody has the 0D_DECU.csv file for the Democube (Sales Transactional Data). I tried to generate it in my system but for some reason I don't have it.
    I would appreciate any help, thank you!
    Jessica.

    If you are looking for 0D_DECU_TRDAT.CSV, you can generate it using the RSO_BC_FILES_IN_BDS report. Just run the report using SE38, populate the InfoCube text box with 0D_DECU, select export data and run it - the data will appear in your DIR_HOME on your server (which you can locate using AL11).
    -r

  • I have bought a new laptop which does not have a Disk Drive for CDs. How can I load my Acrobat Pro X on to this computer

    I have bought a new laptop which does not have a Disk Drive for CDs. How can I load my Acrobat Pro X on to this computer

    Download it from https://helpx.adobe.com/acrobat/kb/acrobat-downloads.html

  • Does anybody have a WLST script for step-by-step cluster restart?

    Does anybody have a WLST script for step-by-step "smart" cluster restart?

    Dear SAM,
    are you looking for exchange 2013 installation. Please follow below link. I have done the same scenario as yours
    1. install first VM - 2012
    2. Static IP / loopback as primary DNS
    3. install ADDS /DNS (forwarder to ISP)
    4. install second VM - Static IP again
    5. DNS of second VM to be the IP of first VM
    6. this will join the domain
    7. installation of exchange will be simple, configuration from this link : http://www.techieshelp.com/exchange-2013-step-by-step-configuration/
    MARK AS USEFUL/ANSWER IF IT DID
    Thanks
    Happiness Always
    Jatin

  • Why does iphone has common volume control for ringer as well as Alarm?

    Why does iphone has common volume control for ringer as well as Alarm? which is quite unusual. For Exp, In case i lower down my ringer for some reason instead of silent and forget to increase before i sleep, my morning alarm also remains at the same ringer level volume at which i can miss the alarm. Is it due to some specific reason or i have missed something to change in settings. Other phone like Samsung etc, they have separate volume control for ringer and to an extent, Nokia rings for Alarm even if the battery is completely discharged.

    I have booked an appointment at my nearest Genius Bar which is 40 minutes away next week, so do I need a reciept or is the warranty checked from the serial number?
    No receipt needed.
    and is it covered under Apple's 12 month warranty?
    It very well may be covered, depending on what Apple finds.

  • I have got an 4s phone and want to import my notes from my old 3G phone; does anybody has an idea how this can be done?

    i have got an 4s phone and want to import my notes from my old 3G phone; does anybody has an idea how this can be done?

    If you have a Mac, I know you can sync your notes with the Mail application using iTunes by going to the Info tab when you clikc on your iPhone under Devices. Other than that, you may just need to email the notes to yourself since the 3G cannot use iCloud to transfer them.

  • Plz, could anybody send me the driver for VF0010 webcam for xp 64 bit?

    Plz, could anybody send me the driver for VF000 webcam ? iam using xp 64 bit
    my email is [email protected]
    thanks in advance

    yeah exactly
    3000 N100-0768DKU
    XP Home 5.01.2600 SP2
    Ubuntu 8.04(hardy)

  • My imac 27 ``- superdrive accepts and burns CDs and DVDs but no program DVDs. Does anybody has the same problem - or an idea for a solution of that problem?

    Hello imac-users, my problem is: the superdrive accepts normal CDs, DVDs and is also burning them - for example music from itunes. But today I inserted 2 program DVDs - photoshop elements / Adobe and ms office 2011 for mac - and the superdrive does not accept them. After some seconds of running and noise, the DVDs are ejected - also no icon for the DVD on the desctop. So I think, it has something to do with OS X and not with the superdrive. Does anybody having the same problem - and an idea for a solution?

    Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
    Someone on this forum suggested, that USB3 may interfere with the magic mouse.
    I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
    Thanks for the advice, Bee
    Cheers, Gerd

  • Has anybody got Labview GPIB driver for a Time Electronics 5021 Calibrator

    Windows NT and 2000 platforms.
    Time electronics ltd multifunction claibrator model no 5021 or model no 9821

    Hi,
    National Instruments' Instrument driver library is at:
    www.ni.com/idnet.
    I did a search and couldn't find an instrument driver for this instrument.
    You can contact the instrument manufacturer to see if they have a LabVIEW instrument driver.
    Other options are contacting an alliance member to develop the instrument driver or you can do the development yourself. Here's a tutorial on writing instrument drivers in LabVIEW:
    http://zone.ni.com/devzone/conceptd.nsf/2d17d611efb58b22862567a9006ffe76/117f9eaedfd2c9e58625680a005acd06?OpenDocument
    Hope this helps.
    DiegoF.

  • BEA has a new driver for SQLServer2000sp3

    Hi all. SQLServer2000 sp3 has strengthened security functioning,
    which rejects the login packet from all our previous drivers.
    The support case has a change request: CR096111. Your
    support contact should be able to supply you with a new
    version of the 5.1 driver (sp12) which should succeed with
    SQL2000 sp3. Please provide feedback ASAP, if this new
    driver succeeds or fails for you.
    We will not be fixing any of our obsolete driver versions,
    (3.x or 4.X).
    Joe Weinstein at BEA

    Ramakrishna Deglurker wrote:
    Hi! Joe
    Where can we get this driver for SQL Server 2000. Does this
    driver support batch updates/inserts. I looked at Bea website but was
    not able to get it.
    Thanks in advance
    -ramCall support for it. The only change is to allow it to connect to sp3. No new
    features are anticipated.
    Joe
    >
    >
    Joseph Weinstein <[email protected]> wrote in message news:<[email protected]>...
    Hi all. SQLServer2000 sp3 has strengthened security functioning,
    which rejects the login packet from all our previous drivers.
    The support case has a change request: CR096111. Your
    support contact should be able to supply you with a new
    version of the 5.1 driver (sp12) which should succeed with
    SQL2000 sp3. Please provide feedback ASAP, if this new
    driver succeeds or fails for you.
    We will not be fixing any of our obsolete driver versions,
    (3.x or 4.X).
    Joe Weinstein at BEA

  • Does sombody have a labview driver for the Scanlab rtc2 scanner controller

    From the German firm Scanlab we have a RTC2 isa card with a dll. Has somebody already written a labview driver for this card ?
    greetings from the Netherlands

    Hello Martin,
    First, don t worry it shouldn t be very complicated  I work at a reasearch center with physicist and an hospital with physicians, we probably work on something very similar, like eye surgery assisted by laser
    1- First thing first, does your scanner works with the examples provided with Scanlabs? ex.: "Hpgl.exe" with an "*.PLT" file?
    2- If so, have a look at my load correction subVI, I always do a reset before I start working with the scanner control, only once at the beginning. If the function returs :"0" zero, it s working if not, come back to me.
    regards
    Lukasz
    Attachments:
    LOAD CORR FILE (SubVI).vi ‏9 KB

Maybe you are looking for