Does anybody has a document to clone EBS version 11.0.3?

Hi techies,
Could you please share a document/process/steps to clone an 11.0.3(no autoconfig, no rapid clone) environment(db and apps). I'm unable to find a helpful document in Metalink.
Thanks in Advance.
Ravi

Hi Bob,
I do not have any docs for cloning 11.0.3 on Windows, but I have the document for cloning (release 11.5.1 to 11.5.5 non-AutoConfig enabled Oracle Applications systems) which I think is no longer available on Metalink (and of course not supported anymore). If you want to have a copy of this document, please let me know.

Similar Messages

IPhone 5S: does anybody has this problem. During a successful voice call all of a sudden people can't hear me while I can hear them

iPhone 5S: does anybody has this problem. During a successful voice call all of a sudden people can't hear me while I can hear them. Signal is strong and call quality (me hearing the other) is still very good but it looks as if I’m going on mute while I’m not muting my iPhone. When dropping the call and re-dialing it works fine again. It’s a brand new iPhone 5S but it now happened already 4 or 5 times in 2 days.
It feels like a hardware/iOS problem and not a network issue. It happend with iOS7.03 but I just see 7.0.4 is available so will install that one now.
Thanks in advance for feedback
Best regards,
Marco

Hello Jeff,
Thank you for providing so much detail about the issue you are experiencing with the audio on your iPhone. I would be concerned too if the audio on my iPhone was not working unless using speaker phone. I found an article with some steps to take when you are experiencing issues like this:
iPhone: Can't hear through the receiver or speaker
http://support.apple.com/kb/TS1630
Thank you for using Apple Support Communities.
Best,
Sheila M.

Does anybody has a sample bootpd.plist for me?

Hello all!
I would like to establish my own DHCP-Server with MAC SL (Client, not the Server Edition). I recently learned that the "bootpd" shipped with MAC OSX is suitable to provide DHCP service.
Unfortunatly, I could not find any sample config file "/etc/bootpd.plist" which would work as a starting point for me. Some sample which contains at least the basics for a simple DHCP service.
Does anybody has a working sample for me? A "bootpd.plist" which I can place in "/etc" in order to have at least some working starting point?
Thx for your help!

I skipped my plan to set up a DHCP server based on bootpd. It seemed impossible to get a working sample of a bootpd.plist for MAC OSX Snow Leopard (client)
At the same time it was rather easy to set up a DHCP Server using ISC DHCP Server:
--> http://www.isc.org/software/dhcp
It worked almost out of the box.

I have got an 4s phone and want to import my notes from my old 3G phone; does anybody has an idea how this can be done?

i have got an 4s phone and want to import my notes from my old 3G phone; does anybody has an idea how this can be done?

If you have a Mac, I know you can sync your notes with the Mail application using iTunes by going to the Info tab when you clikc on your iPhone under Devices. Other than that, you may just need to email the notes to yourself since the 3G cannot use iCloud to transfer them.

Does anybody has the 0D_DECU csv file (Democube)?

Hi all,
Does anybody has the 0D_DECU.csv file for the Democube (Sales Transactional Data). I tried to generate it in my system but for some reason I don't have it.
I would appreciate any help, thank you!
Jessica.

If you are looking for 0D_DECU_TRDAT.CSV, you can generate it using the RSO_BC_FILES_IN_BDS report. Just run the report using SE38, populate the InfoCube text box with 0D_DECU, select export data and run it - the data will appear in your DIR_HOME on your server (which you can locate using AL11).
-r

My imac 27 ``- superdrive accepts and burns CDs and DVDs but no program DVDs. Does anybody has the same problem - or an idea for a solution of that problem?

Hello imac-users, my problem is: the superdrive accepts normal CDs, DVDs and is also burning them - for example music from itunes. But today I inserted 2 program DVDs - photoshop elements / Adobe and ms office 2011 for mac - and the superdrive does not accept them. After some seconds of running and noise, the DVDs are ejected - also no icon for the DVD on the desctop. So I think, it has something to do with OS X and not with the superdrive. Does anybody having the same problem - and an idea for a solution?

Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
Someone on this forum suggested, that USB3 may interfere with the magic mouse.
I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
Thanks for the advice, Bee
Cheers, Gerd

The monitor on my windows XP is concaving. The vertical side middle is moving toward the middle. Does anybody has any suggestions as to what is wrong?

AS stated the middle of the right side monitor screen is moving toward the middle. Does anyone has a solution. It started this process about five days ago. Thanks.

try testing with any an other monitor in order to under stand the problem, If it works fine that mean you need to contact Monitor manufacturing / support center to check the problem and get repair. you may also check the manual of that monitor if you bought
new one and it comes with new pack.
I am sure you will get some solutions, if you problem still persists that means you can need to check resolution and monitor in control or try safe mode etc.
enjoy :)

Does anybody has a CDN491 driver for CVI?

Looking for a friendly interface to this board.

Yes, thank you, i looked into that. I seem to be having
difficulty contacting them by phone and email however. I figured
i would try NI and see if anybody has already made a compiled VI.

Does anybody has problem with playing youtube in Opera Mini after iOS6 update?

After iOS6 update I can not play youtube from Opera Mini,- neither link to youtube works and embedded video as well. It works ok with Safari, but I prefer using Opera Mini instead. If there is a embedded youtube video or just a link to m.youtube, Opera mini does nothing:(

Cool, in OperaMini forum, there is an answer, that issue has been noticed and will be solved someday!
http://my.opera.com/community/forums/topic.dml?id=1316462&page=2#comment13138752

Does anybody has the code for developping multi-process program .thank you.

I want to run two instance of the same program ,the motive is to access the same data-base at the same time.
I set the database evironment with the flag of DB_INIT_TXN | DB_RECOVER | DB_INIT_LOCK,but the one instance
can't see the modification as the other one has modified the database .

problem has been solved .
improper flag for DbEnv::Open() is the ring-leader :
newly set flag :
#define DEFAULT_EVIRONMENT (DB_CREATE | DB_INIT_LOG | DB_INIT_MPOOL | DB_THREAD | DB_REGISTER)
former flag :
#define DEFAULT_EVIRONMENT (DB_CREATE | DB_INIT_LOG | DB_INIT_MPOOL | DB_THREAD | DB_PRIVATE)

Does anybody has Msi Media Live with 5050e

Hi to eveybody
I have MSI media live and i would like to make an upgrade from my 4000X2 to 5050e
I would to take the benefit of both greater speed and lower consumption
But the catch is that MSI doesn't seems to official support 5050e but it s up to 4850e
I emailed their online service support but the answer is that "AMD hasn't formally released 5050e so it is not tested therefore we can't support it"
So given the fact that this CPU is on sale from November i would like to know if someone took the risk and used this CPU and if it's OK!!!!
Thanks in advance

I know its has being long time but till late June i have a lot of work and i am still trying to find if anyone is using MSI Media Live with 5050e.I am afraid there is no other option than keeping my old cpu because 4850e seems hard to find.
Anyone.....

Does anybody has an idea?

Hi
I want to do this in my program:
select some employees as coordinator, but I want to don't allow user to select a person twice. User select employees by LOV and insert them into multi-item block (a table). I used this code in "WHEN-VALIDATE-ITEM" trigger and change LOV auto refresh to NO:
     DECLARE
          rg_id RecordGroup;
          rec_count NUMBER;
          first_rec NUMBER(7);
          cur_rec NUMBER(7);
     BEGIN
          -- Get the record group ID --
          rg_id := Find_Group( 'RG_COORDINATOR_LIST' );
          -- Get the number of rows --
          rec_Count := Get_Group_Row_Count( rg_id );
     -- delete the selected row --
          FOR j IN 1..rec_Count LOOP
          If Get_Group_Number_Cell( 'RG_COORDINATOR_LIST.EMPLY_NUM_PRSN_EMPLY', j ) = :TEE_COORDINATOR_QUOTAS_VIW.EMPLY_NUM_PRSN_EMPLY Then
          Delete_Group_Row( rg_id, j );
          exit ;
          End if ;
          END LOOP;
     END;
But there is a big problem:
when user change an selected employee I can't come back previews employee to LOV. So by change only one row in table, all LOV records can be deleted.
Is there any solution?
What is your suggestion?
Thanks

Hello,
Check the below same problem...
LOV CLARIFICATION
-Ammad

Does Weblogic has embedded database(not PointBase eval version)

I have developed an application that uses a database. Currently I deployed this on Websphere that has Cloudscape embedded database.
Now we are trying to deploy it on Weblogic. I want to know that does Weblogic provide any embedded database out-of-the-box. I know it comes with PointBase eval version to demonstrate its samples. But can we use/ship this eval version database for commercial product?
Regards,
Jitendra
Message was edited by:
jitendrakharche

Jitendra Kharche wrote:
I have developed an application that uses a database. Currently I deployed this on Websphere that has Cloudscape embedded database.
Now we are trying to deploy it on Weblogic. I want to know that does Weblogic provide any embedded database out-of-the-box. I know it comes with PointBase eval version to demonstrate its samples. But can we use/ship this eval version database for commercial product?
Regards,
Jitendra
Message was edited by:
jitendrakharchehttp://e-docs.bea.com/wls/docs81/faq/jdbc.html#504207
You can consider mysql...
Joe

I got a macbook pro 2008 and can not back up using time machine. it eject my external hard drive everytime. does someone has a fix???

i got a macbook pro 2008 and can not back up using time machine. it eject my external hard drive everytime. does anybody has a fix???

Does your external hard drive have it's own power supply? It should.
Is your external hard drive formatted with the NTFS file system? It won't work.
It needs to be formatted either with Mac OS Extended or FAT32.
(There are drivers available to add NTFS support to OS X but their quality is unknown, especially the "free" ones.)

Anybody has the BEA JMS integration experience?

Dear all,
i am configuring a scenario Idoc >XI>JMS .the external JMS software is BEA JMS server.does anybody has the integration experience?in the JMS communiction channel ,i don't know what should enter for the parameters.thanks a lot
xiao feng

HI Jayson,
you can also request the web service directly.
For example, you could create a local xml file with the values you want to pass to the web service and configure a file 2 soap scenario within XI itself.
You can create interfaces for each available web service.
You could call this scenario "ID objects generator" or something and save the .tpz for the repository objects of this scenario, since you could reuse it in other projects.
Other than that, in Teched '08, Bill Li showed a lot of proxies developed over Java to consume the ID API web services, and they all seemed to work ok. However I do think he used NW Developers Studio 7.0 (2004s), not CE.
I'd raise an OSS msg with SAP in order to check the problem you're getting.
Regards,
Henrique.

Does anybody has a document to clone EBS version 11.0.3?

Similar Messages

Maybe you are looking for