Does anybody have a LabView driver for an OPOTEK tunable laser?

I am looking for an already complied and working driver for the OPOTEK Vibrant tunable laser.

Yes, thank you, i looked into that.  I seem to be having
difficulty contacting them by phone and email however.  I figured
i would try NI and see if anybody has already made a compiled VI.

Similar Messages

  • Does sombody have a labview driver for the Scanlab rtc2 scanner controller

    From the German firm Scanlab we have a RTC2 isa card with a dll. Has somebody already written a labview driver for this card ?
    greetings from the Netherlands

    Hello Martin,
    First, don t worry it shouldn t be very complicated  I work at a reasearch center with physicist and an hospital with physicians, we probably work on something very similar, like eye surgery assisted by laser
    1- First thing first, does your scanner works with the examples provided with Scanlabs? ex.: "Hpgl.exe" with an "*.PLT" file?
    2- If so, have a look at my load correction subVI, I always do a reset before I start working with the scanner control, only once at the beginning. If the function returs :"0" zero, it s working if not, come back to me.
    regards
    Lukasz
    Attachments:
    LOAD CORR FILE (SubVI).vi ‏9 KB

  • Labview driver for agilent 8164A tunable laser

    I'm working on a project that involves setting up our Agilent 8164A lightwave measurement system in labview. I cannot locate the driver software on the NI website. Please let me know where I can download the driver for this equipment. Thanks.

    Actually we don't have a driver for that instrument in our website, so that means that we also don't have it in the CD. So you may want to check the Agilent's website, or as a matter of surprise, I found in our database one document that was talking about some past issue and it involved the 8166 instrument, so the author attached the driver for this instrument so we can reproduce what he found out, so I'm attaching this file here which is the file the previous Sr. mention, "hp816x", I installed it in my computer and run it and it is an Agilent made driver, so you can use this one or try to contact the Agilent people. Also you may request a LabVIEW driver been made for this instrument, please see the details at: O
    ther Driver's Resources from our download site.
    Good luck!
    Nestor Sanchez
    Applications Engineer
    National Instruments
    Nestor
    National Instruments
    Attachments:
    816x.exe ‏2875 KB

  • Has anybody got a labview driver for Lecroy 9410 ?

    Has anybody got a labview driver for Lecroy 9410 ?

    Unfortunately I was unable to find a driver for this instrument either. This leaves you with one of a couple options. First, I would like you to submit a request for this driver at:
    http://zone.ni.com/idnet/other.htm
    We develop drivers based on demand and popularity so the more requests we have for it, the greater the possibility that we will develop one.
    If you would like to try developing your own instrument driver (or modify the existing one), we have documentation, model instrument drivers, and driver templates to help at :
    http://zone.ni.com/idnet/development.htm
    We also have a syndicate of third party vendors that specialize in National Instruments' products and services. Some of the vendors specialize in driver development. I would sugges
    t contacting one of the Alliance members at:
    http://www.ni.com/alliance
    If you have any further queries, please let me know

  • I have bought a new laptop which does not have a Disk Drive for CDs. How can I load my Acrobat Pro X on to this computer

    I have bought a new laptop which does not have a Disk Drive for CDs. How can I load my Acrobat Pro X on to this computer

    Download it from https://helpx.adobe.com/acrobat/kb/acrobat-downloads.html

  • Does anybody have a WLST script for step-by-step cluster restart?

    Does anybody have a WLST script for step-by-step "smart" cluster restart?

    Dear SAM,
    are you looking for exchange 2013 installation. Please follow below link. I have done the same scenario as yours
    1. install first VM - 2012
    2. Static IP / loopback as primary DNS
    3. install ADDS /DNS (forwarder to ISP)
    4. install second VM - Static IP again
    5. DNS of second VM to be the IP of first VM
    6. this will join the domain
    7. installation of exchange will be simple, configuration from this link : http://www.techieshelp.com/exchange-2013-step-by-step-configuration/
    MARK AS USEFUL/ANSWER IF IT DID
    Thanks
    Happiness Always
    Jatin

  • Does anybody have the source code for playing video..?

    Hi i am new to J2ME. Does any body have the source code for playing video?

    The WTK includes a video player example. I would start by looking there. In addtion SE and Nokia (if I remember correctly) both have video examples on their developer web sites.
    The developer sites are
    http://forum.nokia.com
    http://developer.sonyericsson.com
    For some of my midlets I use a utility class. You can view the source here:
    http://hostj2me.cliqcafe.com/www/forumtopicview.html?fid=46&categoryId=36&fpn=0
    Works for my needs;

  • Does anybody has a CDN491 driver for CVI?

    Looking for a friendly interface to this board.

    Yes, thank you, i looked into that.  I seem to be having
    difficulty contacting them by phone and email however.  I figured
    i would try NI and see if anybody has already made a compiled VI.

  • Does anybody have a matte key for fcp  Urgent!!!

    Hi i need a matte key. I am trying to insert pics withing a matte i have a bground layer then the matte layer then the fill on top. I cant find a matte key in FCP. Can anyone help.
    Thanks
    Martin

    right click the fill clip (above the matte) and choose Composite Mode > Travel Matte - Luma or Travel Matte - Alpha ... using luma uses the matte clip's luminance to define the mask, and using alpha uses the matte clip's alpha channel to define the mask

  • I just received a new macbook pro. I am looking for a usb3 external storage 500 GB drive.  Some manufacturers of drives aren't for sure their drive will work with the new lion system. Does anybody have any suggestions for drives that will workw

    I just received a new macbook pro. I am looking for a usb3 external storage 500 GB drive.  Some manufacturers of drives aren't for sure their drive will work with the new  system. Does anybody have any suggestions for drives that will workw

    There seems to be a problem, just now, with the USB 3 ports on the new MBP's supporting eternal USB 3 drives. Some people have no luck at all - can't even recognize the drive - and some are reporting USB 2 speeds (those who drives are recognized). I'd call a dealer such as LaCie or OWC to see if they have USB 3 drives that actually work with MBP's with USB 3 ports. You may have to wait for a software/firmware update.
    Clinton

  • Does anybody already developed or knows where can I find a LabVIEW driver for a CETA 800 equipment?

    Ronaldo Schwarz
    Selco Sistemas Eletronicos Ltda

    Ronaldo,
    I just did a search of the web (and of NI resources), and I could not find any helpful pages offering information on LabVIEW drivers for this CETA 800 equipment.
    The only suggestion I have is that perhaps the manufacturer of the device may have a driver, or may perhaps know of someone who does provide one.
    I hope you are able to find a LabVIEW driver for this instrument. If you end up having to write one of your own, you can visit www.ni.com/idnet to find several resources on writing your own instrument drivers.
    Have a pleasant day.
    Sincerely,
    Darren Nattinger
    Applications Engineer
    National Instruments
    Darren Nattinger, CLA
    LabVIEW Artisan and Nugget Penman

  • Graphic card problem maybe? Since when I have changed the hard drive to my macbook pro and I installed all the new softwares, my mac is very slow and the screen gives crazy pictures,could maybe be the graphic card, does anybody have experienced this?

    Graphic card problem maybe? Since when I have changed the hard drive to my macbook pro and I installed all the new softwares, my mac is very slow and the screen gives crazy pictures,could maybe be the graphic card, does anybody have experienced this?

    after a restart it works for a time, but always slow. I went to the Applestore this afternoon and the made a check and said it would be the logicboard and they would have to change it for CHF 600 and it would be ready in 10 - 15 days

  • Is it possible to have two USB drives for the IPad?  I want to bring RAW photo files from my camera, through the IPad and back to an external hard drive.  One of my cameras does not use an SD card.  How can I do this?

    Is it possible to have two USB drives for the IPad?  I want to bring RAW files from my camera through the IPad and out to an external hard drive.  One of my cameras has an SD card but the other one doesn't have a card that would fit in any of the camera devices I've seen on line.  Realted to this, I bought the IPad camera accessory.  Can I put the SD card in the device and also hook the external hard drive to the USB port of the accessory and download from the camera to the hard drive?  Can I put Lightroom or the Nikon photo editing software on the IPad?  Right now I carry a PC laptop and external hard drives with me on wildernes trips.  Internet and WiFi are not available.  Because I shoot so many photos and they're in RAW I need to download from the camera to the external drive because I run out of memory on the PC (and it has much more memory than the IPad).  I have Nikon NX software and lightroom on my PC.  I'd love to be able to reduce the weight I carry by using the IPad to edit my photos each night while on trips.  Is this possible and how would I do it?  I'd appreciate any guidance.

    No, the camera connection kit only supports the copying of photos and videos to the Photos app, it doesn't support copying content off the iPad. For your second camera instead of the SD reader part of the kit, does the iPad to camera cable not work with it for direct transfer to the iPad ?
    For Lightroom and Nikon software again no - you can only install apps that are available in the iTunes app store on your computer and the App Store app on the iPad, 'normal' PC and Mac (OS X) software are not compatible with the iPad (iOS). There are some apps that perform fairly basic editing functions that are available in the store, but nothing as sophisticated as, for example, Lightroom.

  • The battery for my macbook pro 13 says "service battery".  Now I want to get a replacement but the reviews for it are horrible! Does anybody have any suggestions?

    The battery for my macbook pro 13 says "service battery".  Now I want to get a replacement but the reviews for it are horrible! Does anybody have any suggestions? I don't want to spend 130 dollars on something I'm going to have to replace in less than a year (which is what normally I been reading)  I do design work and I take my mac everywhere.  Having to always look for a plug or having to be constantly plugged in doesn't sound ideal to me.  Please help me. what should I do???

    Why does it matter if it a scam????? I'll let you figure that out by yourself.  If I'm going to replace it, why should I be contempt with a battery that I have to replace within months (as stated by some people in the comments). The issue here is not if I should or not replace it OBVIOUSLY I'm going to have to before it starts going crazy.  The underlying issue is why is the replacement battery for a lack of better words " a bit crap."  It comes with a 3 month guarantee?? Is that a joke?!??!?! Some people complained it malfunction after only 8- 9 months? I'm sorry but as an Apple fan I think it's absolutely rubbish. I know there is no magic cure I'm just hoping someone shines the light on how crappy this replacement is.

  • Ipad2 plus ipad air all of a sudden instantly goes back to home screen.doesnt matter what app i am using just when it decides to do it it does.apple tech has no answer or fix for me does anybody have any idea what is wrong

    ipad2 plus ipad air all of a sudden instantly goes back to home screen.doesnt matter what app i am using just when it decides to do it it does.apple tech has no answer or fix for me does anybody have any idea what is wrong

    First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
    Could also be not enough free space for the iPad to operate efficiently. With iOS 7 it is recommended that you have 15-20% of the storage space on the device free.  For a 16 GB device that is 2.4-3.2 GB free. For a 32 GB device that is 4.8-6.4 GB free. For a 64 GB device that is 9.6-12.8 GB free.
    If neither of these suggestions helps, Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

Maybe you are looking for

  • IMac Late 2006 Screen Shot/Flickers

    Though the computer itself seems find (able to print off the network via laptop), the screen on my Late 2006 iMac seems done. What can I do? The flickery images, like a bad old TV set has kicked in, and I don't see it stopping. Should I attempt a res

  • FI-SD  Tax statement item missing for tax code R4

    Dear, I create a sales order in ECC 6.0, there are a sales type condition=0 and a tax type condition amunt =0, there are an other type condition <>0 without taxes.  I create the billing document without problems, but when I release to accounting appe

  • Security Deposit Refund after one year

    I have paid every phone bill for the past 11 months and I am wondering when I am eligible to have my security deposit returned. I have had no luck with other inquiries I have made regarding this deposit in the past.

  • IPhoto Library photos deleted!

    A couple of days ago I opened iPhoto and all my photos were deleted! But I checked my pictures folder and my iPhoto library still has all of the photos and when i try to import the photos in each roll its says unable to import because this file is al

  • Saving photos in ios6?

    Updated OS to 6 last night, now when I try to save a photo I'm viewing, the "save photo" button appears, but after saving, I can't find that the photo has actually saved anywhere.  Any thoughts?