Does anybody have any experience with keyloggers and a good program to detect one on your mac? I think I may have one.

So yesterday I found out that my email address password had been changed. I don't remember doing this, but it is possible I changed it a while back and considering I keep my email constantly logged in. But at the same time, two of my apps were trying to access their "store". I play a game called League of Legends, which has an online store, and it randomly came up with the message "Could not connect to Maestro" (credit card). Then, Itunes (which I rarely use) came up with "sorry, we could not continue with your purchase". I think it's very strange that all of this happened at the same time, but hopefully it's a case of a forgotten password and two games bugging/crashing. I scanned my entire computer with iantivirus and it hasn't found anything, but I've heard keyloggers can be a bit hard to detect. Does anybody have any experience with keyloggers and if so, what program did you use to detect and destroy it?

If you think that a keylogger has been installed the only safe thing you can do is erase your drive and reinstall.
I don't think that is the case however.

Similar Messages

Question: Do I need to run and anti virus program with MAC OSX Lion? Have heard different opinions! If so what would you recommend? Was looking at Sophos. Does anyone have any experience with this? Thanks

Question: Do I need to run and anti virus program with MAC OSX Lion? Have heard different opinions! If so what would you recommend? Was looking at Sophos. Does anyone have any experience with this? Thanks

Do I need to run and anti virus program with MAC OSX Lion? Have heard different opinions!
You will continue to hear different opinions here, where thoughts range everywhere between "anti-virus software is the evil spawn of Satan" to "anyone not running anti-virus software is a fool."
Truth is, this is still a very personal decision on a Mac. Depending on circumstances, it is still very easily possible to stay safe without using anti-virus software, but circumstances and personal preferences vary widely. Besides which, anti-virus software cannot even remotely provide you a guarantee of protection!
To learn how to stay safe (with or without anti-virus software), and how to decide whether to use anti-virus software, see my Mac Malware Guide.

Anybody have any experience with JPad Pro ?

I have just now downloaded JPad Pro version 5.0 from the web site www.modelworks.com
Does anybody have any experience with JPad Pro? I would appreciate if people who have worked using JPad pro give me thier opinions about it.
Thanks.
Vijay

I have never used it...I find jEdit to be valuable to me...mainly for the syntax highlighting..
My first 2 yrs' coding was spent with "notepad" and or "vi" (text editors) and command line javac...
I am of two minds as to whether to recommend this approach for everyone...I feel closer to the code I write in a notepad...but often times I missed things like "boolian" instead of "boolean" ... things that syntax highlighting assist you with... and unclosed brackets...which when you use an editor like jEdit (or I imagine jPad pro) you can catch easier, due to the auto-indentation.. Searching for these bugs teaches you little other than to be careful while typing :-)
I still run "javac" from the command line ... I think jEdit has a way for me to call it from the GUI..but I've never used it.
If it feels right to you..it is not wrong...the only thing I will NEVER use is a code-writing abomination... some people (even advanced users, and I will not say that they are pansies) use them.. In anything but expert hands, they are catastrophically dangerous.
The risk for code-writing IDEs is that you didn't write it, and there is an extra (un-needeed) level of abstraction from the code, one more level of complexity, that is a blockade to truly understanding the code and improving/maintaining it....

I have paid and downloaded LION and want to update my IMAC, can i just run install and it keep photos settings etc from Snow Leopard or is a full reinstall with wiped hard drive, anyone have any experience of this and do i need to run a backup beforehand?

I have paid and downloaded LION and want to update my IMAC, can i just run install and it keep photos settings etc from Snow Leopard or is a full reinstall with wiped hard drive, anyone have any experience of this and do i need to run a backup beforehand?

Always backup your important data before upgrading to a new Mac OS X.
Lion doesn't erase the drive but better to be safe than sorry.
And run Disk Utility (Applications/Utilities). Verify and if necessary repair the startup disk before upgrading.
Using Disk Utility to verify or repair disks
Before upgrading read here > Lion upgrade questions and answers: Apple Support Communities
And here > What applications are not compatible with Mac OS X 10.7 "Lion"? What upgrade or substitute options are available for common incompatible applications? @ EveryMac.com

[Athlon64] Anybody has any experience with ATI Radeon XPRESS 200P chip sets?

Anybody has any experience with ATI Radeon XPRESS 200P chip sets?
I am looking to purchase a computer for my wife who does not require major computing power. And looks like ATI is a cheaper option. Any recommendations?
Any info is greatly appreciated.

Quote from: dannol48 on 23-June-05, 02:25:47
The RS480M2-IL haa a CnQ option in Bios.
Installing the AMD driver and setting the Power Scheme to "Minimal Power Management" in Power Options is required to enable CnQ in XP.
Danno
Hello Danno ^^¿''
Well, I just bought the RS480M2-IL with a Venice 3000+ and 1 GB DDR, I've tested the Video onboard(all the newest drivers installed) with the 3DMARK 2001, and I just can get 3052 ptos...so .. please tell if you has made some time ...and how's your score?
Oh man please tell me...maybe I made a bad choise but I was specting something better from this Mobo!!!...
thanks and enjoy the time
PD: Another thing: my modo comes with the bios ver. 3.4 ...and have "The Normals falis" son I don't really know wich ver, could be better....cya..

When i search via mozilla i now have to go via mystart incredimail, which i thought i had uninstalled long ago, do you have any association with incredimail and is is now part of mozilla firefox 4 ?

Question
when i search via mozilla i now have to go via mystart incredimail, which i thought i had uninstalled long ago, do you have any association with incredimail and is is now part of mozilla firefox 4 ?

Hmmm, Norton extensions are broken again in Firefox 4.0.1. It seems that Norton didn't allow for Firefox 4.0 security updates when they updated their Firefox extension for Firefox 4.0. Norton says they'll have a fix in two weeks. A Norton user posted a fix in this forum thread.
http://community.norton.com/t5/Norton-Internet-Security-Norton/Norton-Toolbar-not-compatible-with-FF-4-0-1/td-p/442788

I have an iPad with apps and data already on it i just bought a mac how do i transfer the data from i pad to mac

i have an iPad with apps and data already on it i just bought a mac how do i transfer the data from i pad to mac

here
1) Without connecting your iPad to your laptop, start iTunes. Click on Edit. Click on Preferences. Click on Devices. Check the box next to "Prevent your iPod etc. from automatically syncing." Click OK.
2) connect your iPad to your laptop and start iTunes.
3) When iTunes starts, right click on your iPad under Devices in the left column. Select Transfer purchases etc.
4) After it finishes transferring all your apps to your new laptop, right click on your iPad and select Backup your iPad.
5) After it finish backing up your iPad, right click on your iPad and select Restore etc.
6) After it finishes restoring, left click on your iPad , then click on the Apps tab on top, and check the box next to Sync Apps, then click on Apply below.
If everything on your iPad looks good after the sync, go back and click on Edit / Preferences / Devices and UN-check the box next to Prevent your iPod etc. The only other thing you may want to check is if your contacts, bookmarks, etc. are syncing correctly now. If not, go to the Info tab after connecting and make sure you indicate which features you want to sync with what sources.

CineXplayer on my iPad (2) error message stating I don't have permission to copy files from my hp pavilion 6 across to my iPad. I think I may have accidentally disabled iTunes Helper, but it is running in TM.

I use CineXplayer on my iPad (2) and today have started getting an error message stating I don't have permission to copy files from my hp pavilion 6 across to my iPad. I think I may have accidentally disabled iTunes Helper, but it is running in Task Manager.
I have removed iTunes and re installed.

That's a comment in the file. It has no effect at all.

Anybody have any experience with D-Link DNS-323 2-Bay Network Storage?

Hi
I am tired of (expensive space limited) Firewire external drives. If you have any experience connecting your storage, backup through network storage I would appreciate your input. I am looking at connecting a D-Link DNS-323 2-Bay Network Storage $180 plus 2=1TB Seagate drives $99 each to be hooked up to my wired Linksys router- cable modem. Thank you for any input.
W.W.

I'm setting up one right now & the speed is only 9MBps. Connecting to linksys WRT160N router

Does anybody know any software for creating and reading PDF-417 to be integrated in my vi?

Hi, I want to generate PDF-417 from mi vi. After that I want to scan a PDF-417 with a scanner and I want to decode it. Does anybody know any solution to integrate with LabView?
Thanks.

Antonio,
I don't know much about the PDF 417 however there are some examples on NI's site about generating barcodes in LabVIEW.
How Do I Generate a Barcode in LabVIEW?
In addition you can use the IMAQ software etc to read in barcodes if you don't have a scanner. If you do have a scanner then I imagine it has software and some sort of interace that you could use LabVIEW to read data. It may even have a serial connection and you could use all the VISA Serial VIs in LabVIEW to get the data.

I'm trying to open a 'mv' file. I found a program called Flip4mac WMV Player Pro. Does anyone have any experience with this or have another suggestion?

I am trying open 'mv' files. I found a program called Flip4mac MWV Player Pro. Does anyone have experience with this or is there a different way to open these type of files?

It works quite well, but is only useful for playing .wmv files such as those made on older PCs. MPlayer 1.0 rc2 is a free utility that should also play .wmv files.

Anybody has any problems with installing and printing with canon lbp6650dn?

hi,
i bought a new i-sensys lbp6650dn and i am trying to make it work with my macbook 10.5.8. the installation cd that comes with it does not work with mac. i downloaded the latest drivers from canon's website, and could add the printer to my list.
computer's connected to the printer with USB. both the computer and the printer show no error, but whenever i try to print a document it starts printing jumbld letters and numbers that look like programme codes. moreover, it prints around 20 pages for a 1-page document. does anybody know what the problem might be? i am not sure whether there is something wrong with the computer's settings or the printer's. it's the first time installing a printer is giving me such a hard time. any help would be much appreciated.
thanks!

Try reseating your memory. Sometimes this occurs when the RAM is not seated all the way in the slot.
You could also boot from your 1st install disk while holding down the D key. Then run the diagnostics on your MacBook.
Message was edited by: First Magus

Anyone have any luck with steam and wine

im trying to get any steam to work with wine and so far i've had no luck.
i have a 512 ATI RADEON X1600 graphics card and im using the open source ati driver.
have had some success with counterstrike 1.6. I start a game (local) but it is extremely choppy/laggy.
does anyone have any pointers on how to get it to run more smoothly?

I don't know how well the open source drivers are going to handle games, catalyst may work better but you will have to use the legacy driver (here) for an X1600, and it doesn't work with the most recent kernel.

Any Experiences with OODBMS and WLS (also Javlin or VEJB)

Hi guys,
we are evaluating WLS in combination with OODBMS and RDBMS. Has anybody
done this before and want to give us some hints on it. We take a look at
Versant and Object Store versus Oracle 8i. We have to build a high
traffic site with approx. 1000 hits/sec. We intend to modell the
business logic in the EJB Modell. We have to present product-infos, news
etc from a database. There are to pretty new containers out there :
Javlin and VEJB(Versant). Has anybody experience with these products ?
As I learn from this newsgroup there seem to be some performance
problems regarding Entity Beans. I would like to know if this problems
occur with OODBMS or RDBMS or both. Is the Container the bottlenack or
the database ? It seems that from the performance point of view
stateless Session Beans with pooled jdbc-Connections are the best
solution. Is this right. Has anybody put in Java-Instances right in an
OODBMS without involving a container ? What experiences have you made ?
Thanks for your help
regards Oliver

Oliver,
I suggest contacting the ODI or Versant folks. They can provide a wealth of
benchmarks that explain why they're up there in performance with RDBMSes.
Michael Girdley
BEA Product Manager
Oliver Renz <[email protected]> wrote in message
news:[email protected]..
Hi guys,
we are evaluating WLS in combination with OODBMS and RDBMS. Has anybody
done this before and want to give us some hints on it. We take a look at
Versant and Object Store versus Oracle 8i. We have to build a high
traffic site with approx. 1000 hits/sec. We intend to modell the
business logic in the EJB Modell. We have to present product-infos, news
etc from a database. There are to pretty new containers out there :
Javlin and VEJB(Versant). Has anybody experience with these products ?
As I learn from this newsgroup there seem to be some performance
problems regarding Entity Beans. I would like to know if this problems
occur with OODBMS or RDBMS or both. Is the Container the bottlenack or
the database ? It seems that from the performance point of view
stateless Session Beans with pooled jdbc-Connections are the best
solution. Is this right. Has anybody put in Java-Instances right in an
OODBMS without involving a container ? What experiences have you made ?
Thanks for your help
regards Oliver

Any experience with Paralles and Windows XP Pro? Advise?

I am new in Mac world. I understand Parallels software will let you install windows on a HD partition.
Any suggestions to make this process as expedite as possible?
How big is the partition required?
Is it possible install windows based aplications on that partition? software?

I have a core 2 Duo (3.33) iMac with 8GB and run Parallels 7 with a Windows 7 operating system. I use it for surfing the web and Microsoft business applications. I find no problem with heat and speed. For everything else, I use OSX.
I was using the same product/operating system on a MacBook Pro (2005) Core 2 Duo with 8GB of RAM and had no difficuties either.
THe problem with Bootcamp is you have to reboot your machine to switch between OSX and Windows. That was a killer for me. In addtion, with Parallels, you can drag files accross platforms if necessary.
I haven't tried Fusion. You can download a trail of Parallels and see how you like it before you commit to a purchase. There are online sales from time to time and you can buy the product for less than $40.00.

Does anybody have any experience with keyloggers and a good program to detect one on your mac? I think I may have one.

Similar Messages

Maybe you are looking for