Does anybody know how to center the text in a sortableheader?

I am using UIX.

Of course you shouldn't do so anyway...
Terminal programs should coexist with all other terminal programs and not try to dominate the screen.
They should never clear the screen as this would remove output from other programs running in the same terminal.

Similar Messages

  • I need to erase the contents of my phone and restore to factory settings. Does anybody know how to save your texts so you don't lose them?  Can I back those up to iCloud?  My phone was very likely hacked (Apple's advice was to call the police!)

    "I need to erase the contents of my phone and restore to factory settings. Does anybody know how to save your texts so you don't lose them?  Can I back those up to iCloud?  My phone was very likely hacked (Apple's advice was to call the police!)"
    That was all I could put in the initial "box."  Then it brought me to this page with instructions on how to write a good sentence.
    Proceeding ...
    After going back and forth between Apple, AT&T and the police (all telling me to go to the other two) I took AT&Ts suggestion and got a new number. One tech warned against doing a backup, especially on my Mac, saying if my phone had been hacked then whatever bug was there would then invade my computer. But nobody knows how to determine if the phone has been hacked or a virus was planted there. Unfortunately I know who would have reason to do such a thing and all I can say is that he is at the top technologically and could easily do it. Almost impossible to prove, however.
    So I need to preserve my text messages and my emails as well. I backed up my photos to that Microsoft product (One-Drive) and it froze (Surprise, Surprise) with four short videos to go, and no way of stopping that (when I tried it crashed repeatedly) so I'm in crisis mode here.
    Help ...
    Running 8.0 on 5S
    Thanks!

    Betty I don't know if you fixed your hacking problem but I feel your pain. I've seen some strange things going on between my iMac and my iPhone and Apple has told me the same thing, call the police which I have done. The hackers have stole 500.00 out of my checking account have access to every internet account I use and no matter how often I change the password their right back on the account. I closed my FB account 3 times only to have someone reopen it. Right now I've got a link in my reading list (Safari) that if I click on it, it allows me to log onto my FB account anonymously.
    I've seen a green folder come out of no where while I was trying to delete my passwords out of keychain when that green folder was put into the key chain I was immediately locked out. I than went into system preferences to try to make changes to my security settings, when I clicked on the icon it wouldn't open. I've seen log files of automator receiving commands and sending out my personal information thats on my computer.
    I have a legitamate program called iExplorer that allows you to look at the contents of your iPhone back ups and saw a transaction someone made at the Apple store for some full length movies, some albums, ibooks and other apps but when I called the iTunes store and they said none of those items were showing up on my account. If their not on my account how can they be on my iPhone 6? One day someone was using my gmail account and unknowingly used google maps to search for an Italian restaurant, than a Mexican restaurant than a coffee shop and their search showed up on my iPhone but I didn't have my gmail account installed on my iPhone 6. Using my computer I logged onto my gmail account and looked at the maps history and sure enough there were the searches when I'd hover my curser over the link it gave me the longitude and latitude of the where the hacker was when he was using google maps. I know whoever reads this thinks Im crazy but I've documented everything and can prove the things that I have mentioned in this post actually happened.
    One day I had my laptop (pc) and my iMac next to each other as I was using both. when I clicked on airport it showed that my laptop and my iMac had made a connection and were actually communicating with each other. I know I didn't do it I don't know how. The iMac was logged into my iCloud account while my laptop wasn't. I have formatted my iPhone at least a dozen times, Apple and an Apple retailer have formatted my hard drive not to mention the numerous times I have formatted it but the hackers keep getting on my devices. Im formatting my lap top at this very second because during the course of the night I left the ethernet cable plugged into it and they locked me out of my c: drive, and configured the system so I can't download any updates from Microsoft, overtime I type in www.microsoft.com it changes to ww38.microsoft.com which takes me to a blank page. I right clicked on the page I was redirected to and read the java script and couldn't believe that someone had actually configured Internet Explorer to redirect me to a blank page when I tried to go to Microsoft. Apples answer to all this is there was nothing wrong with my iPhone or my iMac and if I thought there was a problem to call the police which I have done.
    Theres no doubt the hackers are reading this while I type it or will read it and I simply don't care anymore. I no longer email anyone, don't use my iCloud account and have taken precautions to protect my credit but if I ever find out who has invaded my privacy to this extreme the police are going to want to talk to me because Im going to hurt them like they've never been hurt before

  • Installed Yosemite and now lost apps and also my App Store does not open. Does anybody know how to fix the problem?

    Some weeks ago, I installed OS X Yosemite, as shown on my App Store, that was a "System Update available for my IMac 2009". Followed all the steps, normally and installed it as I did many other times ago (with the Maverick, Mountain Lion, OS X).
    Just after the installation, I noticed that every single folder or program that depends on "Apple", stopped working.
    Examples: Office package opens normally, so as Firefox. But, IPhoto, ITunes, Safari and App Store itself do not.
    That is causing me fear, because even trying to reinstall Yosemite or return to the one I had before, using App Store became impossible. Even the "Apple Icon" on the top left corner does not work. I click, it flashes, just IF it was ready to open, but nothing happens, seams that have something stopping the "loading process" of the softwares.
    Does anybody know how to fix the problem, please?
    Thanks in advance. Regards.

    Thanks for your attention.
    I Tried before, but the Mac App Store was not responding either, and worse, after 5 years, There is no free phone support
    I ended up solving it by reinstaling the Yosemite pressing "comand + R"
    thanks anyway
    Regards

  • Hi  does anybody know how to change the language of interface in demo version illustrator CC

    Hi  does anybody know how to change the language of interface in demo version illustrator CC ?

    It doesn't help. I will try to download again illustrator
    Отправлено из мобильной Почты Mail.Ru
    Понедельник, 9 марта 2015 г., 18:36 +0300 от Mylenium  <[email protected]>:
    Hi  does anybody know how to change the language of interface in demo version illustrator CC created by  Mylenium in  Downloading, Installing, Setting Up -  View the full discussion

  • Does anybody know how to get the license for Adobe LiveCycle if i dont have the installation disk?

    Hi,
    I no longer have the installation disk for Adobe LiveCycle and i need to install it onto a different PC due to upgrading hardware etc... Does anybody know how to recover the licence for the version of Adobe LiveCycle we have? Can it be found in the registry or anything?
    Thanks.

    Sorry, but Apple does not provide technical support via email, so they have no published email addresses. You will need to find a way to call them. Or make an appointment with the Genius Bar at an Apple Store, if there are any near you, and have them follow up.
    Regards.

  • Does anybody know how many seconds the Cross Fade is on an iPod Nano 4/5th Generation?

    In Settings > Playback > Audio Crossfade - when you turn this to 'On' does anyone know how many seconds the crossfade is for?
    I can't find anything online, it's not in the iPod manual and no-one at my local Apple Store knows!

    It depends on how long the song(s) is.
    For example: I listen to On My Level by Wiz Khalifa and the song last for 4:35 so at the last 6-3 seconds it will crossfade to the next song and you'll missout of the first few seconds of the next song.
    Message was edited by: keeferaf

  • Does anybody know how to export the events log from a IPS 4260 ?

    My company has a Cisco IPS 4260 and we used to get the log from the Cisco Security Manager but since July the software failed and now (December) I need to get / export the log from July to December that I think it is saved into the IPS.  Is it possible?   Does anybody know the command to see the saved log or the commands or procedure to export the log into a TFTP or FTP ?
    I'll really appreciate your help, thanks.

    No; That cannot be done. Only through a SDEE server.
    Events are stored on a hard drive that the IPS has, if it has not been reloaded they should be there with no issues.
    Get the application "IME". If I am not mistaken, you would be able to see those events there and I think there is a way to export them from there.
    Mike Rojas

  • Does anybody know how to modify the driver for the Tektronix 370A curve tracer so that it will work with the 370B?

    I am trying to control a Tektronix 370B curve tracer using LabView via a GPIB interface. However, there are no drivers available for download for the 370B. There is one available for the 370A, but it is not compatible with the 370B and I have been unable to figure out how to modify it to make it work with the 370B. Does anyone know how to modify this driver, or know of an existing driver that works with the 370B? Thanks!

    Hi S _Bracht,
    Yeah, unfortunately, the Tektronix 370B does not currently have an instrument driver and the driver for the 370A is not supported by National Instruments (it is just posted on our website as a courtesy) - so I am afraid that there is not really any more information on the differences that might exist between the two available from National Instruments.  As an alternative, you can always develop your own driver using the VISA and 488.2 drivers + a copy of the user manual for the Tektronix 370B.  Otherwise, you may consider speaking with Tektronix or getting ahold of a User Manual for the 370A and comparing some of the settings - there are likely some differences in your configuration options at the very least.  Or, if someone out there has tackled this before and shares their knowledge...
    Good luck! 
    Regards,
    Anna M.
    National Instruments

  • Does anybody know how to change the title of your podcast on iTunes and the description of it?

    I was working on my feed site and when the podcast popped up on iTunes I realized that I put the wrong info and title on it. Anybody know?

    You change the title and descriptions by entering the changed versions in wherever you originally entered the items in whatever system you are using to create your feed, then re-publish the feed; it will take the iTunes Store a couple of days or so to catch up.
    However, if the method you are using to create your feed is one of those which uses the title of the podcast as part of the URL, and this changes if you change the title, then if you change the URL as a result the iTunes Store will lose contact with it and fail to update in future: so be careful about this.

  • Does Anybody know how to keep the license files and Certificates in ISE-3315 During the upgrade.

    Hi,
    I have two ISE-3315 Appliances in production network.
    I need someone's help to explain, how to make the Secondary node as the primary admin note to reset-config.
    And then I would like to know how to keep the license files and Certificate during the Upgrade.
    Please help me to answer my questions.
    Thanks
    CSCO11872447

    The Cisco Identity Services Engine (ISE) provides distributed  deployment of runtime services with centralized configuration and  management. Multiple nodes can be deployed together in a distributed  fashion to support failover.
    If you register a  secondary Monitoring ISE node, it is recommended that you first back up  the primary Monitoring ISE node and then restore the data to the new  secondary Monitoring ISE node. This ensures that the history of the  primary Monitoring ISE node is in sync with the new secondary node as  new changes are replicated.
    Please  Check the below configuration guide for Secondary ISE- Nodes.
    http://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_dis_deploy.pdf

  • I have deleted by mistake the site bar and I don't know how to eneter a site that I want to do, does anybody knows how to get the site bar back?

    i made a right click and by mistake i deleted the site bar and i don't know how to get it back. :/

    It sounds like you have hidden the navigation toolbar. To bring it back, in the View menu select Toolbars, then click on "Navigation Toolbar" in the list of toolbars to display it. Active toolbars will have a tick by their name.
    If the menus themselves are missing, press either Alt or F10 to temporarily display the menus. You can then Select View > Toolbars and then click on "Menu Bar" in the list to permanently display it.

  • Question from Germany: Does anybody know how to reset the iPhone 4 when display is suddenly only shown in a part?

    Nothing is known as a reason, suddenly it was only a little part of the display, so I can't use the iPhone. I have done a reset to the situation how I bought it, and after that a new synchronisation. But nothing has changed... Do you have a solution for this problem? Thanks, Heike

    If the part you can see is enlarged, double-tap with THREE fingers. Then go to Accessibility Settings and turn off Zoom.

  • My ipad wont power on, its fully charged. Does anybody know how to unlock the ipad by the home button and power button?

    please help

    You may have to hold the home and power buttons down for more than 10 to 15 seconds.  That is the normal amount of time it should take to do a soft-reset on an iDevice.  But I have had a similar problem and found that if I held the buttons down for a couple of minutes my device (iPhone, iPad, iPod) would finally unlock and start up.  You just have to be patient and hold the buttons down.  You might also try doing this with your iPad plugged into the charger.

  • Does anybody know how to Clear the screen in Java?

    Hi guys,In C we use System Clear.
    In java,which instructions shall i use in order to clear the screen?
    Thanks,in advance!

    Of course you shouldn't do so anyway...
    Terminal programs should coexist with all other terminal programs and not try to dominate the screen.
    They should never clear the screen as this would remove output from other programs running in the same terminal.

  • Does anybody know how to fix the back buttons?

    The back button in the browser doesn't seem to be working in my JSP page by default. Is there a code(JS or anything) I need to place in the JSP file to make the back button work?

    Hi Onamika,
    The back button in the browser doesn't seem to be working in my JSP page by default !!
    Did u disable the back button using Javascript in any of ur JSP codes in the previous pages ? If u did so, please re-enable it using Javascript again.
    If u mistakenly opened some site that has disabled ur browser's back button, then probably the only way to retrieve it back is to shut down IE, then restart ur system and then re-open that website again....but make sure not 2 go 2 that page that disabled the button.
    Hope this helps.
    Cheers !!
    Sherbir.

Maybe you are looking for