Does anybody know how to create a BUMPER for a video?

I am trying to create a bumper for a video. What I mean is rather then having a blank screen, it would be nice to have a image on the first frame of the video. This video will be for the web so it is much nicer to have. Please let me know how I can do this.
Thanks!

Hey Tom, Thanks for getting back to me. When I say "Bumper" I mean like an image on the first part of the video rather then just having it blank. Here is a link to show you what I mean http://veggietestimonial.peta.org/psa.aspx?CID=82ba254f-faba-4650-90ff-e4db1db49 05b
You will notice it has a picture on the screen then when you press play it starts playing the video. By bumper I mean like an into image.
Hope this helps.
Thanks!

Similar Messages

  • Does anybody know how to get the license for Adobe LiveCycle if i dont have the installation disk?

    Hi,
    I no longer have the installation disk for Adobe LiveCycle and i need to install it onto a different PC due to upgrading hardware etc... Does anybody know how to recover the licence for the version of Adobe LiveCycle we have? Can it be found in the registry or anything?
    Thanks.

    Sorry, but Apple does not provide technical support via email, so they have no published email addresses. You will need to find a way to call them. Or make an appointment with the Genius Bar at an Apple Store, if there are any near you, and have them follow up.
    Regards.

  • Does anybody know how to retrieve a passcode for iPad?

    Hi,
    I've just updated my Uncle's iPad to ios7 and it's locked the iPad. Does anybody know to reset it so he can get into it?

    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
    1. iOS- Forgotten passcode or device disabled after entering wrong passcode
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. Restoring iPod touch after forgotten passcode
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. iOS- Understanding passcodes
    6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    Forgotten Restrictions Passcode Help
    You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
    Also, see iTunes- Restoring iOS software.

  • Does anybody know how to modify the driver for the Tektronix 370A curve tracer so that it will work with the 370B?

    I am trying to control a Tektronix 370B curve tracer using LabView via a GPIB interface. However, there are no drivers available for download for the 370B. There is one available for the 370A, but it is not compatible with the 370B and I have been unable to figure out how to modify it to make it work with the 370B. Does anyone know how to modify this driver, or know of an existing driver that works with the 370B? Thanks!

    Hi S _Bracht,
    Yeah, unfortunately, the Tektronix 370B does not currently have an instrument driver and the driver for the 370A is not supported by National Instruments (it is just posted on our website as a courtesy) - so I am afraid that there is not really any more information on the differences that might exist between the two available from National Instruments.  As an alternative, you can always develop your own driver using the VISA and 488.2 drivers + a copy of the user manual for the Tektronix 370B.  Otherwise, you may consider speaking with Tektronix or getting ahold of a User Manual for the 370A and comparing some of the settings - there are likely some differences in your configuration options at the very least.  Or, if someone out there has tackled this before and shares their knowledge...
    Good luck! 
    Regards,
    Anna M.
    National Instruments

  • Does anybody know how to create an equalizer effect? Thank you in advance!

    Hi guys, I am trying to do something like that http://www.youtube.com/watch?v=_wC721zLZz4, and I hope there is a tool to make an equalizer effect in a simple way.
    I would really appreciate if someone help me with this task since I am very beginner in After Effect.
    Thank you in advance!
    Alina

    See this earlier thread
    http://forums.adobe.com/thread/960730
    The Coremelt VeeYou set of freebies is far more interesting that the ol' boring audio graph you get in AE.

  • I have 2 iPhones - one for personal use and one for work. They are currently connected with the same Apple ID. I would like to separate the two accounts. Does anybody know how to do this?

    I have 2 iPhones - one for personal use and one for work. They are currently connected with the same Apple ID. I would like to separate the two accounts. Does anybody know how to do this?

    Just create a new AppleID for your work.
    As Allan suggested, items purchased on one iTunes account cannot be moved to the other account.
    However, you can put items purchased on on account onto the other iPhone.

  • Does anybody know how to solve this font problem?

    Hello everyone,
    I have had this font problem for weeks now and I can't seem to get it solved. There are a number of fonts that won't load properly in Illustrator, PS, and InDesign. They are loaded in the system, but refuse to show up in the list. I've installed them in the home directory/library/fonts. These are commercial opentype fonts and one homemade opentype font. Sometimes the font that I created will appear, other times it does not, but many other fonts refuse to show up in the font display lists of these 3 software packages.
    I've cleared the font caches with FontNuke, everything looks like it should work properly, but it does not. Also, with Font Book, I've resolved any duplicate font problems. Does anybody know how to solve this problem? Is this a known CS4 bug?
    Any help would be greatly appreciated. I'm using the latest Mac Mini and CS4 software.
    Thanks in advance.
    CB

    Hi,
    How do I check if the fonts have the correct creator and so on?
    Anyway, I've spent the better part of today validating and removing suspect
    fonts. Why does the right click choice for resolve duplicates and the
    validate font behave completely differently in Font Book? I discovered that
    when this is investigated further with the validate font command, I found I
    had a massive amount of duplicates that according to font book cause minor
    errors. I thought that would have been sorted out with the resolve duplicate
    command, instead I ended up check marking and manually removing the fonts
    that had minor errors.
    I still have many commercial fonts plus my own font not showing up in
    Illustrator or PhotoShop. If I copy and paste the font directly into
    InDesign's font folder, my font shows up. I also tried removing my font to
    see if this would fix any of the other problems. It doesn't. I did type in
    my font name in the console dialog box and this message is displayed for
    this font as well as mine and many others.
    10-04-06 5:21:09 PM Font Book[12940] ##### ERROR:  The font system thinks
    the font
    file://localhost/Library/Fonts/Voluta%20Script%20Pro/VolutaScriptPro-Regular.otf
    is active, but the file no longer exists!
    Then I went back to font book to check to see if it is there and it is
    enabled. For my font the caution triangle appears with the multiple copies
    of the font is installed. Resolving duplicates doesn't solve this problem.
    Any ideas of how to fix this problem?
    Thanks
    CB

  • I have a problem with the keyboard on my MacBook. The letters are typing as symbols and the delete and return/enter buttons do not work. Does anybody know how to fix this?

    I have a problem with the keyboard on my MacBook. The letters are typing as symbols and the delete and return/enter buttons do not work. Does anybody know how to fix this?

    Hey skyshade13,
    Thanks for the question. The following article outlines how to restore a previous iTunes library should there be no content after updating. While the article does not speak specifically to your symptoms, attempting the steps by utilizing the "Previous iTunes Libraries" folder may resolve your issue.
    No content shows up in iTunes after updating
    http://support.apple.com/kb/TS1967
    For further information see the following information:
    OS X Lion: iTunes opens to "created by a newer version" alert
    http://support.apple.com/kb/TS3918
    iTunes: How to re-create your iTunes library and playlists
    http://support.apple.com/kb/HT1451
    Thanks,
    Matt M.

  • Hi  does anybody know how to change the language of interface in demo version illustrator CC

    Hi  does anybody know how to change the language of interface in demo version illustrator CC ?

    It doesn't help. I will try to download again illustrator
    Отправлено из мобильной Почты Mail.Ru
    Понедельник, 9 марта 2015 г., 18:36 +0300 от Mylenium  <[email protected]>:
    Hi  does anybody know how to change the language of interface in demo version illustrator CC created by  Mylenium in  Downloading, Installing, Setting Up -  View the full discussion

  • Does anybody know how to check if the business partner has the authority

    Does anybody know how to check if the business partner has the authority to change business partner relationship?
    Best regards?
    Blake Le

    Hi,
    Do you mean that you would like to check if the user has the authorization to create a relationship, or change the validity of the relationship?
    As per SAP architecture, authorizations are assigned to users, not business partners.
    Business partners, could be assigned to users, who in turn have authorizations. This is typically seen for business partners, with the role, Employee.
    Hope this helps,
    Regards,
    Nelson.

  • Page numbers displayed incorrectly in TOC in new Pages - does anybody know how to fix this?

    I'm working on a multi-section document with a single TOC for two sections. Section one uses lowercase roman numerals (i, ii,...) and section two arabic numerals (1, 2, ...). The page numbers are displayed correctly on the pages themselves, but in the TOC the first two headings from section two (pages 1 und 3) are displayed as "i" and "iii". This only started after the update to pages 5, everything was fine before that. Does anybody know how to fix this? I already tried deleting the TOC and inserting a new one and changing the numbers to uppercase letters and back, to no avail.
    thanks for any input

    Go back to Pages '09 inside the iWork Folder inside Applications.
    There are so many problems with Pages 5 it is difficult to know where to begin.
    Peter

  • I need to erase the contents of my phone and restore to factory settings. Does anybody know how to save your texts so you don't lose them?  Can I back those up to iCloud?  My phone was very likely hacked (Apple's advice was to call the police!)

    "I need to erase the contents of my phone and restore to factory settings. Does anybody know how to save your texts so you don't lose them?  Can I back those up to iCloud?  My phone was very likely hacked (Apple's advice was to call the police!)"
    That was all I could put in the initial "box."  Then it brought me to this page with instructions on how to write a good sentence.
    Proceeding ...
    After going back and forth between Apple, AT&T and the police (all telling me to go to the other two) I took AT&Ts suggestion and got a new number. One tech warned against doing a backup, especially on my Mac, saying if my phone had been hacked then whatever bug was there would then invade my computer. But nobody knows how to determine if the phone has been hacked or a virus was planted there. Unfortunately I know who would have reason to do such a thing and all I can say is that he is at the top technologically and could easily do it. Almost impossible to prove, however.
    So I need to preserve my text messages and my emails as well. I backed up my photos to that Microsoft product (One-Drive) and it froze (Surprise, Surprise) with four short videos to go, and no way of stopping that (when I tried it crashed repeatedly) so I'm in crisis mode here.
    Help ...
    Running 8.0 on 5S
    Thanks!

    Betty I don't know if you fixed your hacking problem but I feel your pain. I've seen some strange things going on between my iMac and my iPhone and Apple has told me the same thing, call the police which I have done. The hackers have stole 500.00 out of my checking account have access to every internet account I use and no matter how often I change the password their right back on the account. I closed my FB account 3 times only to have someone reopen it. Right now I've got a link in my reading list (Safari) that if I click on it, it allows me to log onto my FB account anonymously.
    I've seen a green folder come out of no where while I was trying to delete my passwords out of keychain when that green folder was put into the key chain I was immediately locked out. I than went into system preferences to try to make changes to my security settings, when I clicked on the icon it wouldn't open. I've seen log files of automator receiving commands and sending out my personal information thats on my computer.
    I have a legitamate program called iExplorer that allows you to look at the contents of your iPhone back ups and saw a transaction someone made at the Apple store for some full length movies, some albums, ibooks and other apps but when I called the iTunes store and they said none of those items were showing up on my account. If their not on my account how can they be on my iPhone 6? One day someone was using my gmail account and unknowingly used google maps to search for an Italian restaurant, than a Mexican restaurant than a coffee shop and their search showed up on my iPhone but I didn't have my gmail account installed on my iPhone 6. Using my computer I logged onto my gmail account and looked at the maps history and sure enough there were the searches when I'd hover my curser over the link it gave me the longitude and latitude of the where the hacker was when he was using google maps. I know whoever reads this thinks Im crazy but I've documented everything and can prove the things that I have mentioned in this post actually happened.
    One day I had my laptop (pc) and my iMac next to each other as I was using both. when I clicked on airport it showed that my laptop and my iMac had made a connection and were actually communicating with each other. I know I didn't do it I don't know how. The iMac was logged into my iCloud account while my laptop wasn't. I have formatted my iPhone at least a dozen times, Apple and an Apple retailer have formatted my hard drive not to mention the numerous times I have formatted it but the hackers keep getting on my devices. Im formatting my lap top at this very second because during the course of the night I left the ethernet cable plugged into it and they locked me out of my c: drive, and configured the system so I can't download any updates from Microsoft, overtime I type in www.microsoft.com it changes to ww38.microsoft.com which takes me to a blank page. I right clicked on the page I was redirected to and read the java script and couldn't believe that someone had actually configured Internet Explorer to redirect me to a blank page when I tried to go to Microsoft. Apples answer to all this is there was nothing wrong with my iPhone or my iMac and if I thought there was a problem to call the police which I have done.
    Theres no doubt the hackers are reading this while I type it or will read it and I simply don't care anymore. I no longer email anyone, don't use my iCloud account and have taken precautions to protect my credit but if I ever find out who has invaded my privacy to this extreme the police are going to want to talk to me because Im going to hurt them like they've never been hurt before

  • I just got my dads old iPhone 4. I restored it to factory settings and set it up with my apple id. The albums in my music are fine in iTunes but on my phone the albums are split and each song is its own album. Does anybody know how to fix this?

    My dad has recently gotten a new phone and I got his old one. With his permission I restored it to factory settings and set up the iPhone 4 as a new phone with my apple id. Everything has downloaded fine but I have had many problems with my music. First it was where my phone didnt recognise my apple id, but I  figured that out. Then it was where iTunes took one of my albums and split it so all the songs where their own albums. I fixed the album split on iTunes but its still like that on my iPhone. I have looked online everywhere and I still haven't found a solution! I'm getting super frustrated! Does anybody know how to fix this?

    No it's not stealing. They have an allowance that you can share with so many computers/devices. You'll have to authorize her computer to play/use anything bought on your acct. You can do this under the Store menu at top when iTunes is open on her computer.
    As far as getting it all on her computer....I think but I am not sure (because I don't use the feature) but I think if you turn on Home Sharing in iTunes it may copy the music to her computer. I don't know maybe it just streams it. If nothing else you can sign into your acct on her computer and download it all to her computer from the cloud. Not sure exactly how to go about that, I haven't had to do that yet. I wonder if once you authorize her computer and then set it up for automatic downloads (under Edit>Preferences>Store) if everything would download. Sorry I'm not much help on that.

  • Hey, does anybody know how can i have two different apple ids on my mac imessages, because i have two mobile phones with different ids and i would like to be able to send imessages from both accounts on my mac. Tnx

    Hey does anybody know how to set up 2 apple ID on mac imessages? Because i have 2 different iphones and i would like to send imessages fron both accounts on my mac...

    Associate your mobile numbers with your Apple ID, if you haven't already done so.
    Sign out of iMessage on the Mac:
    Messages ▹ Preferences ▹ Accounts ▹ Sign out
    and on the iPhone:
    Settings ▹ Messages ▹ Send & Receive ▹ Apple ID ▹ Sign out
    Then, on the phone, tap
    Use Your Apple ID for iMessage
    Sign back into iMessage on both devices and test. If there's no change, you may have to wait for a change in network conditions.
    Credit for this solution to ASC member SmittyLove and to Glenn Fleishman of tidbits.com.

  • Since I downloaded the new update on my iphone 4s I no longer see the delivered message under my text when sent.  Also the message is green instead of blue.  Does anybody know how to fix this?

    Since I downloaded the new update on my iphone 4s I no longer see the delivered message under my text when sent.  Also the message is green instead of blue.  Does anybody know how to fix this?

    You are sending SMS messages. iMessages are blue. Go to Settings>>Messages>>iMessage ON.

Maybe you are looking for

  • IMac Model 2012 makes restart after sleep and after shutdown ?!

    Hello Communities , my iMac Model 2012 i5 / 16 Gb RAM , does not go shut down ! it makes a restart , the same when  it go to sleep ? When i shut down , the iMac goes down .... then ca. 10 sek. after them it starts self again !!!! What i have do : -  

  • How to open a new iView in the same window?

    Hi   i want to open a new iview in the same window.How can i do that ? Thanks

  • Resizing by blocks

    Hello, I'm creating a custom JComponent that has lots of lines, like a JList, but they are all part of the same component. I want to make it resizable, but in a way that it only grows or shrinks if there's space for each line to change its size, beca

  • Can't select paper with Epson R1900

    I am using a new r1900 with Photoshop Elements 6 and Aperture. In Aperture everything is great! I get the print dialogue box which features all the epson papers and theirr subtypes. (Glossy, Matte, Art and submenus) But in Elements I get an old dialo

  • Backwards Compatibility Flags

    One of our dgraphs has the following parameters - --back_compat 601 --back_compat 610 --back_compat 614 Is there any known performance issues or has anyone a bad experience setting these flags? We're seeing some performance slowness with regards to n