Does anybody know the error code 11 while updating to ios 4.3.3.? thx
does anybody know the error code 11 while updating to ios 4.3.3. on an ipad1? thx
but my hard drive is still lot of spaces...still keep on trying to update...
Similar Messages
-
My final cut studio keeps giving me this error out of memory message when ever i try to render a piece of footage and its closing unexpected. Does anybody know the reason?
I had this problem about 2 months ago and, as others have suggested in this thread, eventually traed it backed to some stills I had scanned and brought into the project. Accidentally I had changed the scanner settings, with the result that a couple of skills were well beyond 1980 x 1020 pixels. I resampled the stills and everything was fine again. Hope this might help.
-
Does anybody know the exact date when iOS 6 will be released?
Does anybody know the exact date when iOS 6 will be released? I know it will be coming out in the Fall, but I was wondering if anybody knew the exact date.
no one but apple knows for sure, and I'm willing to bet at this point in time all they have is a target date (if the software package was done it'd be released)
Bear in mind also, the first 48-72 hours after the software's release it's often quite challenging to get the update or it takes a lot of time because you're one of millions that are trying to get on the servers. So release date and available/accessible date can be separated by a bit. -
Does anyone know what error code -8065 means?
Does anyone know what error code -8065 means?
It usually means the iPhone was hacked, with "jailbroken" being the cutsie term for that.
http://support.apple.com/kb/TS3694#error1015
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state. -
TS3694 Does anyone know what error code 1015 means?
Does anyone know what error code 1015 means?
It usually means the iPhone was hacked, with "jailbroken" being the cutsie term for that.
http://support.apple.com/kb/TS3694#error1015
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state. -
TS3694 hi does anybody know what error 50 requirments are
hi does anybody know what error 50 requirements are needed
Well, I hope my experience helps someone in future as it appears nobody knows the answer.
But apparently this has to do with problematic files- either the file itself, or the file name, not sure.
How do I know this? because Finder also barfs on the same files. I was copying 30k+ tracks to a new drive and as iTunes was balky I decided to do it with Finder [yes, this creates other problems but at least it gets the files where I need them].
I tried selecting all of the tracks at once and dragging them, and letting Finder do the work overnight, but when I cam back in the G5 had gone into blower apoplexy and had to be restarted by pulling the plug. So, I started grabbing ever-smaller bunches of folders to narrow down the issue and to pitch the bad files. I did NOT try to identify the bad file, just the folder.
Michael Spencer -
Does anybody know the terminal instruction to remove the shadow from screen grab images
Does anybody know the terminal instruction to remove the shadow from screen grab images?
I saw it somewhere on some site ages ago
(I like to align images together and take another screen grab without the darn shadow and without opening another app)I found this:
defaults write com.apple.screencapture disable-shadow -bool true && killall SystemUIServer
but this soesn't seem to work
and this
To get rid of the shadow and only capture the window, enter this line of code in Terminal:
defaults write com.apple.screencapture disable-shadow -bool true
Then to implement the change, enter:
killall SystemUIServer
To revert the modification and restore shadows, enter:
defaults write com.apple.screencapture disable-shadow -bool false
doesn't work either in Mountain Lion -
How to know the error code?
Hi,
how can i know the error code of the error occured in plsql ?
Eg if i catch the exception IN WHEN others THen i need to pront the error code.
How can i do it?exception
when others then
dbms_output.put_line(sqlerrm||sqlcode);
end; -
Does anybody know the app cleaner
does anybody know the app cleaner???
is it good?? my macbook is getting very slowI doubt that AppCleaner is going to speed up your Mac - unless you're short on hard drive space. Some companies have uninstall instructions or even apps on their websites for uninstalling their software. Use these instructions/apps if at all possible.
I've used AppCleaner a couple of times just to get rid of as much auxiliary junk as I can... but my use of it is limited only to those apps which I know haven't made any system modifications.
Be warned - without instructions/apps for uninstalling is the best method of uninstalling applications. Use AppCleaner only as a last resort.
See thomas_r's -> How to uninstall software.
Good luck,
Clinton -
Macbook Air failed wifi connection - Does anybody know the solution?
Macbook Air has been connecting to Wi-Fi network without issue for almost 2 years.
Haven't been able to find a solution to 'failed Wi-Fi connection' so far.
Wi-Fi is turned on but is not connected to a network.
Wi-Fi Settings Failed.
Have tried trashing:
Library/Preferences/SystemConfiguration/com.apple.network.eapolclient.configurat ion.plist
Library/Preferences/SystemConfiguration/com.apple.network.identification.plist
Networkintefaces.plist
And restart, but no change.
Mac OS X Version 10.7.5
1.6GHz Intel Core i5
Does anybody know the solution?Had restarted the router a few times to no avail.
Checked out the vendor's website, but wasn't able to find anything of use, -it was limited options wise.
Nothing in the OS X recommendations for Wi-Fi settings jumped out me.
I wasn't able to experiment with the band/channel settings.
I ended up buying a USB/Ethernet adaptor so I could at least have access to the net (5 days ago), -which didn't change the Wi-Fi issue...
However, after a couple of days without use, I've woken the machine and noticed the Wi-Fi signal at full strength. The network is detected and connected!
Problem solved ...But how? -
I'm getting this code while updating my adobe products...specifically CS6 U44M1I210....can anyone tell me what this means and what I should do
to make the download complete?
ThanksGoogling "U44M1I210" points to http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html
See if that KB article helps. -
Does anybody know the itunes startup switches / command lines?
I have 2 itunes librarys and dont like having to hold Shift when I open itunes every time to switch itunes librarys.
I want to create 2 shortcuts to itunes on my desktop, each containing a switch / command line to open the desired library
Does anybody know what the switches / command lines are to startup itunes?As far as I know, the only arguments iTunes.exe supports is a path to a file to start playing (music or video). You can't tell it via command-line switches to open a certain library.
I do however have a helper program that will do what you want. You give it the path to your library folder as an argument, so you have to create shortcuts to my exe, with the library folder as the argument.
For example, if the path to one of your iTunes Library is C:\library (i.e. inside C:\library is the file "iTunes Library.itl", the "iTunes Music" folder, etc.), then the shortcut target would be:<pre>C:\itunesopenlibrary.exe -b C:\library</pre>
The program works by editing the iTunes Prefs.xml directly, then starting iTunes. The -b switch is to make a backup of the prefs file before editing it. Note, however, that it only makes one backup; the next time you run itunesopenlibrary.exe with "-b", it will overwrite the last backup.
Download the program here:
http://mysite.verizon.net/teridon/itunesscripts/index.html#itunesopenlibrary
The forum TOS requires me to say: "I may receive some form of compensation, financial or otherwise, from my recommendation or link" because I have a paypal donation link on my webpage, but the program is free (donation totally optional)
HTH,
Rob -
BW experts: I have to extract GL data into BW, and I was assuming I would use 0FI_GL_4 datasource. However, I began looking around and see now 0FI_GL_10. I am not knowledgable on the finance side at all in SAP, so I don't know which extractor makes sense to use. Does anybody know what the difference is between these two extractors.
Kind Regards,
Christhese two datasources are different from each other.
If you are still using the old GL - you need to use 0FI_GL_4
If you are still using the NEW GL - you need to use 0FI_GL_10
And one more thing to keep in mind id 4 extractor is meant for line items and 10 is for totals. And there is no std line item DS for NEW GL. You need to create ur own. -
I'm trying to erase some application but I can't due to a error code 1407, can somebody please help out?
The 1407 code usually means the file/program is locked and in use. Reboot your system and then move it to he trash. If you still get the error, do a safe boot by holding the shift key down (this will take longer than your normal boot) then delete it. If it still doesn't work, find the original OS X DVDs (or Snow Leopard disk) that shipped with your system, boot to the DVD by holding the C key down, then delete the application on your internal hard drive.
-
Does ANYONE know what error code 4280 is referring too?
I have asked this same question 4x this will be my 5th time. I keep getting an error code 4280 and I have no idea what it is or how to fix it. Someone.... anyone please help.
Here is the diagnostic code
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
HP Pavilion 061 DQ176A-ABA a430n
iTunes 6.0.4.2
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: ASAPIW2k (6.0.0.1), PFC (2.5.0.204), MXLW2K (1.1.0.121), AFS2K (3.1.21.0), PXHELP20 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: NVIDIA GeForce4 MX 440 with AGP8X \GeForce4 MX 440 with AGP8X
IDE\DiskMaxtor6Y160P0_________________________YAR41BW0, Bus Type ATA, Bus Address [0,0]
USBSTOR\DiskGenericUSB_CF_Reader__1.01, Bus Type USB
USBSTOR\DiskGenericUSB_MS_Reader__1.03, Bus Type USB
USBSTOR\DiskGenericUSB_SD_Reader__1.00, Bus Type USB
USBSTOR\DiskGenericUSB_SM_Reader__1.02, Bus Type USB
IDE\CdRomASUSCD-S480/AH_________________________0.85___, Bus Type ATA, Bus Address [1,0]
IDE\CdRomHPDVD_Writer_300n______________________3.10___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
E: HP DVD Writer 300n, Rev 3.10
Drive is empty.
F: ASUS CD-S480/AH, Rev 0.85
Data or MP3 CD in drive.
Found 1 songs on CD, playing time 72:46 on CDROM media.
Track 1, start time 00:02:00
Get drive speed succeeded.
The last failed audio CD burn had error code 4280(0x000010b8). It happened on drive E: HP DVD Writer 300n on CDR media at speed 16X.Here is a thred that explains exactly what this error code is, and the steps others have takin to fix it. Just follow Toonz suggestions, hes very good at nailing these CD errors in iTUnes
http://discussions.apple.com/thread.jspa?messageID=802204󃶜
Maybe you are looking for
-
Search help of material is not working in ECC 6.0 : Urgent
Hi Friends, I am using ECC 6.0. I have a problem in search help of material by plant. In the search help of material (choosing the tab plant material by descriptions), if i give any plant which is 3 chars long (exp. ABC) it is giving correct combinat
-
Online Information/Warning message behaviour in Custom Enhancement Impl.
Hi, I have implemented the enhancement point mm06ef0p_pruefen_01 of enhancement spot es_mm06ef0p_pruefen in the include program MM06EF0P_PRUEFEN. In my implementation i am issuing an Information message. In the online transaction this information mes
-
Urgent reply is needed for Quantity contract negotiation error
hello i have triggered quantity contract negotiation from the webshop,but i CRM web ui,when i open the same contract after logging onto Web UI with business role sales manager,on the header data assignment block i get the status as "sent to customer"
-
How mail can be send to superior if not approved within deadline
Hi firends, I'm a little new 2 workflows and i have 2 issues 1) If the approver doesnot act with a time limit a mail has to be send to his superior regarding the delay approver is creating. How can i achieve this scnerio? will the tab 'LatestEnd' h
-
Purchased ColdFusion 10: Having problem with session variables
My Dept. has just bought CF10 and I'm finally updating my existing web app to CF10 from CF8. My First Problem with CF10 is using session variables. When using the lower version of CF (since CF 4 to 8) I have never had any problem setting up session v