Does anybody know what the discount is on the ADC Student Membership?

title says it all...looking at a 20" or 24" IMac

Hi,The link below may help
http://developer.apple.com/students/sthardware.html
kindest,becca

Similar Messages

  • I have forgotten the pass word to my ipod touch. Does anybody know what to do?

    I have forgotten the pass word to my ipod touch.Does anybody know what to do?

    Connect the iPod to is syncing computer and restore.  If iTunes asks for the passcode and you can't enter it or if you do not have the syncing computer, place the iPod in recovery mode and then restore. For recovery mode:
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • My Mac is doing strange things: delaying between users, mouse flickering and bouncing, gets stuck with rainbow wheel flickering. I ran the appel hardware test and it detected an error: 4MOT/4/40000003:HDD-1233 Does anybody know what that means? HELP!

    My imac is doing strange things:
    -delaying between users: when closing session it goes to blue, then takes a while to appear users signin box, and then wont recognize mouse command to enter until a couple of minutes later... then everything seems alright until....
    -it gets stuck between things, the rainbow wheel appears and its just delays there forever....
    -and every now and then the mouse starts flickering and bouncing wildly onscreen.
    I ran the appel hardware test and it detected an error:
    4MOT/4/40000003:HDD-1233
    Does anybody know what that means? HELP!

    WZZZ answered about where to get iStat. And do check the SMART status. If it is an overheating problem due to a fan or logic board problem, your hard drive is possibly cooking itself to death. If so it isn't a faulty hard drive even though the hard drive might fail. So assuming it's a temperature problem, even if you are able to repair things on the disk with software, that is working on symptoms, not causes. I could be wrong however.
    RE: AppleCare: Your iMac came with one year of AppleCare (Apple's warranty program), but within the first year you can buy 2 more years. You have to extend by the one year anniversary of purchase of the computer. Your 10,1 is too old to still be in the first year, and since you asked what it was, I'm sure you don't have it. Bottom line meaning is that whatever this problem turns out to be, you'll have to pay for it. Unless there is something like this. It is for 2011 iMacs with certain Seagate drives. You can put in your serial number for fun, but it looks like yours is too old. Lastly, some people have had Apple help them anyway if it is just out of warranty, but many have not. Your machine is one of these. Type in 10,1 in the search box. Is there an Apple Store near you? Just b/c it's out of warranty doesn't mean you shouldn't have it looked at by Apple. But no one here can say at all what Apple will or will not do.
    Hope you get it taken care of!

  • After downloading the latest version of iTunes and updating my iPhone everytime I turn on my computer I get a message that reads: AppleSyncNotifier.exe - Entry Point Not Found. Does anybody know what this means?

    After downloading the latest version of iTunes and updating my iPhone, everytime I turn on my computer I receive a message that reads: "AppleSyncNotifier.exe - Entry Point Not Found. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQlite.dll" Help! Does anybody know what this means and how I can fix it? Thanks.

    Yes.  I just solved the problem on my PC.  Here goes...
    Issue:  My Windows7 computer was producing the pop up box with the error text as you described.
    The Problem: You have another application on your computer that uses the like named .DLL file... in this case a DLL supporting SQLite on your local PC.
    Solution: 
    1.  You need to use the Windows File search feature to look for the name "SQLite".  This will quickly locate the offending DLL in the other application.
    2. Decide which program you like the most, in my case "Mobile Me", and uninstall the offending application.
    3.  Uninstall Mobile Me.
    4.  Restart your PC.
    5.  Reinstall Mobile Me.
    6.  Mobile Me should sync at this point, but if not, restart the PC once again.
    In my case, the offending program was my Aptana Studio development application.  I had recently the SQLite3 database to my Ruby On Rails configuration...
    This is where the file was located:
    C:\Users\<USERNAME>\Aptana Studio 2.0\plugins\com.aptana.radrails.sqlite3.win32_3.5.7.1278709071\vendor\SQLite3.d ll
    I hope this helps,
    Ron

  • Music I have purchased from Itunes will no longer play on my laptop.  When I click on a song to play it, it says the file cannot be found.  Does anybody know what to do?

    Purchased music from I-tunes will no longer play when I hit play.  The message "music file cannot be located" pops up and then takes me to some other file system.  Does anybody know what to do?  I have already tried to make sure that my Itunes player is default and that is not the problem.
    Help!

    You get this message because  iTunes can’t find the file. This can happen for a number of reasons:
    The song file or a folder in its path was renamed
    The song file or the folder it is in has been moved
    The song file has been deleted
    The device containing the song files e.g. external drive is not accessible or the drive letter has changed.
    Do any of these aply to you?

  • HT2476 I have just downloaded Mountain Lion for my MacBook Pro and now when my applications open they close and the error "This has just quit unexpectedly" message pops up. Does anybody know what is happening?

    I have just downloaded Mountain Lion for my MacBook Pro and now when my applications open they close and the error "This has just quit unexpectedly" message pops up. Does anybody know what is happening/how to fix it?

    Welcome to Apple Communities
    Press Command and R keys in boot and reinstall

  • Everything I own (iPad, iPhone, mac) is set up on wi-fi.  when i bring my work computer home (dell laptop), I cannot get it to keep the connection in a different room. All my other devices work.... does anybody know what i am doing wrong? please help!

    Everything I own (iPad, iPhone, mac) is set up on wi-fi.  when i bring my work computer home (dell laptop), I cannot get it to keep the connection in a different room. All my other devices work.... does anybody know what i am doing wrong? please help!

    Windows drivers for Intel wireless cards are known problematic.. If you have plenty of signal and it still cannot keep or hold the connection the issue can simply be the type of wireless.
    Another problem is using names that windows does not easily handle.
    eg If you set the TC using apple names, like
    Fred Blog's Airport Time Capsule wireless24ad12
    Then to windows this is too long.. it has spaces and it has illegal character.
    Change all names on the TC to suit windows. Short, no spaces and pure alphanumeric.
    Also security must be suitable.. I have no idea how old or what OS your dell is, but if you still have issues.. pull off the security on the TC for a test.. if the computer suddenly works, it is not compatible with WPA2 AES. Make sure you also use a password that is mix upper and lower case plus numbers.. avoid special characters and make it 10-20 characters long say.. it is not required to be more than that unless you are paranoid.

  • HT204053 Hi all, I am constantly running into problems opening iCloud services (mail, calendars, iWork's, etc.). I get a message stating i.e. Can't load Mail (Calendar, iWork), There was a problem loading the application. Does anybody know what a heck is

    Hi all, I am constantly running into problems opening iCloud services (mail, calendars, iWork's, etc.). I get a message stating i.e. Can't load Mail (Calendar, iWork), There was a problem loading the application. Does anybody know what a heck is going on?

        I can see that this issue has been quite extensive, and frustrating, and I am so sorry for all that has happened societygirl! I would like to help you work this issue out. Please follow & send me a Direct Message, so I can get your account specifics and help finally bring this to a resolution.
    Thank you,
    MichelleH_VZW
    Follow us on Twitter @VZWSupport

  • We have mac with OS X 10.6.8, it isn't able to connect to our ipad air. does anybody know what the problem is?

    we have mac running with OS X 10.6.8, it isn't able to connect to our ipad air. does anybody know what the problem is?

    Macs on OS 10.6.8 cannot link with a device running iOS7.  You will need Os 10.9 Mavaricks on your Mac.

  • TS1372 does anybody know what is wrong with the ipod when error 1437 is reported during the restore mode?

    does anybody know what is wrong with the ipod when error 1437 is reportedduring the restore cycle?

    Double check the connections on each end to make sure they are nice and snug. If possible, plug the Nano into another existing USB 2.0 port. 
    Also, with the iPod still connected, try resetting it. To do this, press and hold both the Select (Center) and Menu buttons (or the Volume Down and Sleep/Wake buttons on the 6G Nano) long enough for the Apple logo to appear.
    Then try restoring the iPod again.
    B-rock

  • Does anybody know what the phrase can't find driver mean?

    I have a PowerMac 4,2 and it won't start up for me It goes to a black and white screen and has the words panic,and unable to find driver
    for this platform. Does anybody know what that means,and what do I have to do to fix it. Thank you and have a great day Dale

    It means you have likely installed something for Intel Macs that runs at startup that won't work with that Mac.  If you moved a hard drive with Mac OS X 10.6 or later on it to the Powermac, that would cause such a problem.  If you connected a hard drive with 10.6 or later on it on it that was running Target Disk Mode (booting the Intel machine holding the T key) to it, that would cause such a problem.  If you attempted to install 10.4.4 or later system specific disc on a hard drive that was designed for an Intel Mac, and moved it to that machine, that would cause such a problem.  If you attempted to install a GUID formatted partition hard drive as opposed to Apple partition map on the machine, that could cause such a problem.

  • I preordered the iPod Touch 5th Generation, and it says it will be here in October. Does anybody know what day in October, or have any idea when in October?

    I preordered the iPod Touch 5th Generation, and it says it will be here in October. Does anybody know what day in October, or have any idea when in October?

    Apple has not provided additional details, sorry.

  • Does anybody know what happened to the songs that are 69 cents?

    Does anybody know what happened to the songs that are 69 cents?

    There are still some around but it is usually older music.

  • HT201412 Hi, when I try to download any APP I receive Error Code: 1009 I try it with itunes Does anybody know, what the code 1009 means?  Thank you fro helping

    Hi,
    when I try to download any APP I receive Error Code: 1009
    I try it with itunes
    Does anybody know, what the code 1009 means?
    Thank you for helping

    What country are you from?
    1009 usually means your IP address originates in a country that does not have access to an App store.

  • TS2446 I've been trying to get into my apple account since Tuesday to do updates. I have tried everything. I have been on the phone with apple for hours at a time and nobody can help. Does anybody know what I can do.

    I've been trying to get into my apple account since Tuesday to do updates. I have tried everything. I have been on the phone with apple for hours at a time and nobody can help. Does anybody know what I can do.

    Try Resetting the PRAM

  • Does anybody knows what is the difference between MacBook Pro MC723LL/A and MC723RS/A?

    Does anybody knows what is the difference between MacBook Pro MC723LL/A and MC723RS/A?

    evghenii wrote:
    Does anybody knows what is the difference between MacBook Pro MC723LL/A and MC723RS/A?
    No difference other than one is for the Russian market. Specs on both are the same, standard Apple Store issue versions.
    Of course the screen choice of anti-glare, glossy, high res or low res is not included.
    The default is likely the cheap glossy and low res.
    MC723LL/A  - 2.2Ghz MacBook Pro (15" Early 2011) $2,199
    Display 13,3'' Dual-Core i5 2.3GHz/4GB/320GB/HD Graphics/SD, Russian (MC700RS/A)
    Display 13,3'' Dual-Core i7 2.7GHz/4GB/500GB/HD Graphics/SD, Russian (MC724RS/A)
    Display 15.4" Quad-Core i7 2.0GHz/4GB/500GB/HD Graphics/Radeon HD 6490M/SD, Russian (MC721RS/A)
    Display 15.4" Quad-Core i7 2.2GHz/4GB/750GB/HD Graphics/Radeon HD 6490M/SD, Russian (MC723RS/A)
    Display 17'' Quad-Core i7 2.2GHz/4GB/750GB/HD Graphics/Radeon HD 6750M/SD, Russian (MC725RS/A)

Maybe you are looking for

  • Change the invoice amount

    Dear experts       i have a customer invoice its amount is 18000.and posted also *my question i want to change the 18000 to 20000 .is it possible.       i don't want to reverse this truncation Thanks in Advance   Ajeesh.s

  • Usage of Department/Staff switch in Organizational Unit

    Hi All, Just would like to know the detail usage of the Department/Staff switch for the Organizational Unit. Currently neither the Department nor the Staff switch is selected for all the organizational units created. What would be the effect and impa

  • Speedgrade won't launch  - Splash Window then nothing!

    Hello, I have had an issue with Adobe Speedgrade CC 2014 not launching either stand-alone (just launching the app) or by using the Direct Link from Premiere Pro. The Splash screen appears, then vanishes without showing the software. Basically, it loo

  • Replace With feature error in Adobe XI Pro

    Hi, I get the following error when trying to use the Replace With feature: "Unable to highlight text across multiple text boxes." I'm attempting to replace one term with another throughout a 38-page text document. I'm new to XI Pro, so maybe there's

  • Delimiting positions during an action

    Hi all,   when we 1st implemented, when we did an action (i.e. employee transfer) we recieved a popup asking if we wanted to delimit the previous position, now for some reason this isn't happening. Does anyone have a suggestion as to how to turn this