Does anybody work for adobe in here

does anybody work for adobe in here or does adobe hope that
software users will do there job for them like many companies
do,they sell a product and let people go out and spend more
cash on books and stuff to learn it(Which makes these companies
more money by you buying these books) cause every help forum i have
seen no company member excauly helps people but only people who
have bought the sofware. so i wracken let adobe get off there
a.r.s.e and spend time going through forums and really helping
people with there problem but that would cost money and companies
dont spend money they only like to make it

> There's nothing wrong with them
1. From time to time, they do not synchronize posts in from
the NNTP
forums, so we (here) are left shouting into the wind "NO NO
NO DON'T DO
THAT!"
2. The interface between the two mangles (and then truncates)
pasted code,
so that it's impossible to decipher, and with a long post,
it's just not
usable.
3. The paste link function doesn't pass across the interface
*at all* - so
that's why you often see us asking for a link to the page
even when the OP
says "I did already".
4. The EDIT post function doesn't propate those edits to the
NNTP side,
frequently leading to rampant confusion.
5. Question answered option doesn't work for NNTP.
6. The page refreshes are very slow, sometimes interminably
so.
7. The interface is busy to the point of significant user
confusion.
But other than that they are fine... 8(
> Ultimately the newsreader messages have to come from and
go to a forum.
No - ultimately it has to come from and go to a database.
These problems
are not insoluble - they are just not important to the bottom
line. Ergo,
we all suffer with them....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"*mista*" <[email protected]> wrote in message
news:[email protected]...
> Agreed that newsreaders are much faster. I am using
Outlook Express as
> recommended by you - No complaints there.
> I still find no reason to trash the forums. There's
nothing wrong with
> them.Ultimately the newsreader messages have to come
from and go to a
> forum.
>
> "Murray *ACE*" <[email protected]>
wrote in message
> news:[email protected]...
>>> For someone using dial-up at home etc. the web
forum would be better
>>> rather than trying to synchronize and download a
large number of
>>> threads.
>>
>> Clearly spoken by someone who has never experienced
the delight and ease
>> of use of a really FAST newsreader instead of the
bog goofy webforums.
>>
>> --
>
>

Similar Messages

  • CS4 suite serial number does not work for Adobe Acrobat Pro

    Hello,
    I am looking for a solution for the serial number issue I am having with Adobe Acrobat Pro. All of other programs within the suite open fine, but when I open Adobe Acrobat Pro it asks for a serial number. When I type in the serial number, I am given a red "X".
    I have called customer support, but they haven't been able to give me any information that will resolve my issue (uninstalled 4 times now). I have Vista and have looked online and on the Adobe website to find a solution. It looks like others are having the same issue from what I can tell while searching. I have run the script too and then reinstalled, but still nothing.

    After some stupid upgrade in my computer (who knows as Microsoft is always doing something), my Acrobat 9 in CS4 stopped working. The error message said to uninstall and reinstall Acrobat. So I went through the control panel and uninstalled it. I then loaded the CD and reinstalled. However the reinstall would NOT accept the orginal serial number. I called Adobe and they gave me a different serial number. Before I let the guy nof the line I tried the  number and it did NOT work! So then he gave me another number which  asked for the previous verison- apparently it was an upgrade number. Luckily I had my old CS3 software and I gave it that number and then it accepted the install. The program now works BUT there is no longer any ADD/REMOVE choice in the CS4 suite in the control panel. There is no way to automatically remove this program anymore! What a mess.
    After reading some of the installation problems others have had and no solutions, I count myself lucky! At least I was able to get the program running.
    Therefore my advise on the serial number problem is to get Adobe on the phonen and get them to give you a number that will work, and don't hang up until you know the program is working!
    If anyone knows how to add the Acrobat to the the add/remove functions in the control panel, please let me know!

  • Does Anybody Work At Adobe Anymore

    I have been waitning on hold for some technical service with ColdFusion Builder now for over 2 HOURS and counting

    Hi Jeff,
    We apologize for the inconvenience caused. The same thread is discussed at http://forums.adobe.com/message/5299493#5299493.
    Regards,
    Anit Kumar

  • Does OpenShot works for anybody out here?

    I've submitted a bug, because OpenShot is not working properly on my computer. I suspect that this problem might be connected with Python 3 and mess in dependencies. Does anybody has and idea how to fix it? Or does OpenShot works for anybody out here? If yes, then I'd appreciate a list of dependencies along with version numbers.

    OpenShot does not work for me out of the box:
    [karol@black ~]$ openshot
    ------------------------- ERROR 1 ------------------------------
    Failed to import 'from openshot import main'
    Error Message: cannot import name main
    OpenShot (version 1.3.1)
    Process no longer exists: 12830. Creating new pid lock file.
    /usr/lib/python2.7/site-packages/openshot/windows/SimpleGtkBuilderApp.py:32: GtkWarning: Failed to get constuct only property adjustment of hsVideoProgress with value `adjustment4'
    self.builder.add_from_file(path)
    /usr/lib/python2.7/site-packages/openshot/windows/SimpleGtkBuilderApp.py:32: GtkWarning: Failed to get constuct only property adjustment of hsZoom with value `adjustment3'
    self.builder.add_from_file(path)
    /usr/lib/python2.7/site-packages/openshot/windows/SimpleGtkBuilderApp.py:32: GtkWarning: Failed to get constuct only property adjustment of vscrollbar2 with value `adjustment2'
    self.builder.add_from_file(path)
    /usr/lib/python2.7/site-packages/openshot/windows/SimpleGtkBuilderApp.py:32: GtkWarning: Failed to get constuct only property adjustment of hscrollbar2 with value `adjustment1'
    self.builder.add_from_file(path)
    state saved
    Segmentation fault
    but after installing qt, as suggested in the bug report https://bugs.archlinux.org/task/25119 - it seems to work fine.

  • I started the OS system from a backup hard drive. Now My Adobe products doesnt work. "the licensing does not work for this product" Error code 150:30. Help me please!!

    I started the OS system from a backup hard drive. Now My Adobe products doesnt work. "the licensing does not work for this product" Error code 150:30. Help me please!!

    Reinstall the software properly. migration/ backups do not work due to the specific requirements of the activation system.
    Mylenium

  • Thumbnail preview works in adobe reader 9 but does not work in adobe 8.0

    I have small issue. Thumbnail works in adobe reader 9 but but does not work in adobe acrobat 8.0 in win xp

    Anyone going to tell me how to do this uninstalling and installing??????????
    I don't want to mess things up even more! Geez--I'm almost 60 years old,
    need to work and this might be costing me a job. I'm not 20 and text and
    e-mail etc every day. I'm just asking for a little help that as I see it ,
    is due to a "glitch" with Adobe's software. They can easily in their
    technological minds put a warning on anything before someone downloads
    anything such as "If you download this and you  have already downloaded
    that,, then it won't work." How tough would that be??? They, like most other
    major corporations, are in it for the money. What has happened to customer
    service???
    I need a step by step with my hand held and so it won't screw up things even
    MORE. Adobe...get your customer service and your software together...This is
    draining. I may lose a job over it. I need to have my computer running well
    at this point in time as there is no extra time to spend dealing with
    software issue that are a result of Adobe's software incompatibility.
    I was on the phone for TWO hours last night telling people exactly what was
    going on. I even read the error message word for word. No one would help me
    unless I coughed up the money that I don't have...and in addition I will
    lose a job that might get me some money. This is why I am so upset. Why is
    dealing with Adobe always so difficult??? Of course, I am upset. I'm
    actually a lovely person. It is just that this stuff rattles my nerves.
    Especially when there is a jobwith a raiseinvolved that I may lose as a
    result.
    Now I had better get dressed and ready for the job I have now before I am
    late for work and lose that job, too.....

  • BUG in iOS7: Post iOS7 upgrade, search option does not work for "Messages". If you want to search a contact name in Messages who is way below the list, the search will not yield any result.

    BUG in iOS7: Post iOS7 upgrade, search option does not work for "Messages". If you want to search a contact name in Messages who is way below the list, the search will not yield any result.

    These are user forums. You are not speaking to Apple here. Report your problem at Apple Feedback.

  • In Robohelp 9, search does not work for some Vietnamese characters.

    In Robohelp 9, search does not work for some Vietnamese characters.

    I don't think there is anything we can do on a user to user forum. I suggest you report this to Adobe as a bug. Please follow this link.
    http://www.Adobe.com/cfusion/mmform/index.cfm?name=wishform&product=38
    If you need a more immediate response, you would need to take that up with Adobe support.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • Drawing with a custom profile stroke is not working for me. Does it work for you?

    Drawing with a custom profile stroke is not working for me. Does it work for you?
    I can only apply it on an existing stroke but can't draw a new one with the selected profile. In fact if I change the profile to other than the default Uniform I also can't draw a new stroke with any other width than the default 1 point. This doesn't seem normal.
    Using SC5 on a PC.

    Another question on the same topic.
    Once I add a new profile to the list is it possible to put it on top of the list. I need this because the Adobe people decided to put the list in a tiny scrollable window with only a few of the first profiles showing. If there is noting in the interface may be I have to modify some program files settings?

  • SM36/37: Specification "After Job" does not work for Daily "periodcity"

    I reviewed http://help.sap.com/saphelp_nw04/helpdata/en/20/2d513897110872e10000009b38f889/content.htm, which states what I am trying to do should work, but it does not.
    Here's the deal:
    1.  I have two jobs: "A" and "B".
    2.  "A" runs Daily.
    3.  I set-up job "B" to run "After job" "A" in my SM36 definition.
    Job "B" will run the next day, but never runs again after that even though job "A" continues to run "Daily" as it should.
    Further info:
    1.  We have "Event-triggered" jobs that run fine, but the "After Job" designation doesn't seem to work ongoingly.
    2.  I can review both jobs "A" and "B" for any "Predecessor" or "Successor" jobs, and, the first jobs to run after the initial set-up DO reference each other (in other words, let's say I schedule job "B" to run "After job" "A" on Tuesday.  After Tuesday's run, Job "A" sees job "B" as it's "Successor" job and job "B" sees job "A" as it's "Predecessor" job), but the definition doesn't last into the next day ONLY FOR JOB "B" (as I mentioned, job "A" always runs fine).
    3.  I can't set the "periodcity" for job "B" because, once I flag it to run "After Job" "A", the "period" options disappear.
    4.  One final tidbit: the variant for job "B" has a "key date" specified so the date is dynamic for each day the job runs.  I can set up job "B" to run "Daily" with this variant and it runs fine, but I wanted it to run AFTER job "A" so it never runs if job "A" doesn't run.  (At this point, it's becoming a matter of principal!)
    Here's my question:
    Why won't job "B" continue to run "Daily" after job "A" (a "Daily" job) runs?
    Thanks in advance,
    Lara

    Please close this thread since you posted the same question here:
    [SM36/37: Specification "After Job" does not work for Daily "periodcity"|SM36/37: Specification "After Job" does not work for Daily "periodcity";

  • When Firefox is open the zoom function (option/command/space bar) does not work in Adobe programs (InDesign, Photoshop, Illustrator)

    Mac OS X 10.6.7
    CS 5.5
    When Firefox is open the zoom function (option/command/space bar) does not work in Adobe programs (InDesign, Photoshop, Illustrator). This happens only when Firefox is open and when I close it the zoom functions work fine again without having to restart the applications.
    This is intermittent but happens quite frequently each day if Firefox is active.

    MDN doesn't mention -chrome being used for ordinary web pages: https://developer.mozilla.org/docs/Mozilla/Command_Line_Options#Chrome
    When I use
    firefox.exe -chrome about:permissions
    I get a usable window, but zoom doesn't work as you noted.
    How about using an intermediate page and window.open() for the target page? You can (mostly) restrict the chrome of windows opened that way, but it will leave behind the intermediate window...
    https://developer.mozilla.org/docs/Web/API/Window.open

  • New update not working for adobe flash?

    Anyone having problems with the new update working for adobe flash?

    No problems here with Flash v12.0.0.77
    Try this ....
    Open System Preferences > Flash Player then select the Advanced tab.
    Click Delete All under Browsing Data and Settings
    Not empty the Safari cache.
    From your Safari menu bar click Safari > Preferences then select the Advanced tab.
    Select:  Show Develop menu in menu bar
    Now click Develop from the menu bar. From the drop down menu click Empty Caches.
    Try a Flash based video.

  • "Track Shipment" is iOS4 does not work for Canada Post tracking numbers

    Not 100% sure this is the best forum to post this but couldn't find an iOS specific forum.
    When an email arrives with a shipment tracking number embedded in it, iOS4 is smart enough to recognize it and turn it into a link. You click the link, select "Track Shipment" and in theory you get sent off to the appropriate shipment tracking website.
    Problem is that this does not work for Canada Post tracking numbers, I get sent to the USPS tracking site instead of the Canada Post one. I assume that the number format is similar but there must be a way to distinguish between CPC tracking numbers and USPS tracking numbers (by range ?).

    This has since become working in 4.0 and higher.
    I noticed I now get a notes folder for each of my email accounts (ie. in my case; MobileMe gets one, Gmail gets another, and Virgin Media a yet another). And all three since accordingly correctly between Notes mailbox on iPhone 4 and it's counterpart Notes mailbox in the mac mail app under Reminders section.
    Additionally, just like other main mailboxes (inbox, drafts, sent, trash, junk), they also have a "unified" box at the top in both mac and iphone, in order to view notes in all email accounts at the same time.
    Hooray Apple, shame it took so long, but at least it's here now

  • Dictionary and selecting words does not work for Japanese documents

    iOS 5 includes both English and Japanese dictionaries. However, it seems that dictionary function does not work for Japanese PDF documents, nor can I select any Japanese words in Adobe Reader. Please fix this!
    Thanks,
    Kenny

    You can start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).<br />
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.<br />
    You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.<br />
    You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")<br />

  • I have an event in my calendar that was sent by someone who does not work for the company anymore and I am reminded 2 times a week. How can I remove it?

    I have an event in my calendar that was sent by someone that does not work for the company anymore and I am reminded 2 times a week. How do I delete it?

    Tap on the event to open the event. Click the 'Edit' button in the event bubble, then press the 'Delete Event' button at the bottom of the Edit pop-up. It's a little different for events that come through Microsoft Exchange, you tap the event to bring up bubble and click the 'Details' button, and then press 'Decline' to remove the event.

Maybe you are looking for

  • Need suggestion in deletion for five tables at a time

    Hi, I need some suggestion regarding a deletion and i have the following scenario. tab1 contains 100 items. for one item tab2..6 tables contain 4000 rows.So the loop will run for each item and will delete 20,000 lines and will do a commit. Currently

  • Smart objects from Illustrator and Indesign dimensions problem

    I have been trying to find an answer to this problem for 6 months now and surprised no one else has tried to find any answers. When we import something from illustrator or indesign as a smart object, for some reason the objects width and height will

  • Additional words added to file name

    For certain forms, when the user submits the form the file name, as expected, is the name that I gave the form. But additionally, Adobe Acrobat Pro.pdf is added after the file name. See figure. Is there a way to keep the "Adobe Acrobat Pro.pdf" from

  • During typing sporadically keys do not respond immediately.

    Sometimes (not constant) when typing, the key does not respond immediately. If I wait 15-30 sec. Then it responds as we'll as additional keys I may have tapped. Also when attempting to save an email to a specific folder, I tap the "save" icon then in

  • OSB/ALSB: xquery transformation

    Hi I have xml of the form: namespaceA="www.school.com/school" namespaceB="www.teacher.com/teacher" <namespaceA:School> <namespaceA:Class>10th</namespaceA:Class> <namespaceB:Teacher>John</namespaceB:Teacher> </namespaceA:School> I want to extract <Cla