Does anyone an Excel macro to display units/currencies next to its KF?

Hello,
I need to change my BEX-display in the following way:
Current:
Order#           Amount (loc.Currcy)            Quanitity (BUOM)
12345             1000 EUR                             5 ST
My idea is to have it as follows:
Order#           Amount            Loc.Currcy         Quanitity        Base Unit Of Measure
12345             1000                EUR                     5                   ST
Ok, I know how to supress the units/currencies for the Key Figures. I also was thinking of using the units/currencies as characteristics but then they would be display right to Order #. I want to have it in a new column right of its associated Key Figure.
I think I can do this with an Excel macro. As I'm not an Expert here, I'm wondering if someone already had done the effort to code such a macro and would be willing to share it with us.
Thanks

Use the "Index Array" primitave under the "Array" sub-palette of the functions Palette. The array wires into the top input, and the index of the element you want wires into the bottom input - then the element of the array at the index is returned out the right hand side of the primative (I've attached an example VI).
cheers,
Christopher
Copyright © 2004-2015 Christopher G. Relf. Some Rights Reserved. This posting is licensed under a Creative Commons Attribution 2.5 License.
Attachments:
Index_Array_Example.vi ‏12 KB

Similar Messages

Does anyone have problems with Mail (Display on the right) ?

Hi to everybody !
Does anyone have problems with Mail (Display on the right) ?
What could be the cause of not displaying HTML correctly ?
Could it be because I use SIMBL, that allows me
to have Colourful SideBar ?
Best regards
Vialatte

Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applica

Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applications.

I received no error message. The application was just trying to find applications unsuccessfully.
I am using MAC OS 10.10.1
I tried to uninstall the application but it seems that a kind of deamon is still installed thus providing me to reinstall properly. Do you know where are the elements to remove in order to get my machine just like before ?
Otherwise I would have to reinstall everything and this would be a pain.
Thanks for your help.

Does anyone know to to recover itunes back up file after its deleted

does anyone know to to recover itunes back up file after its deleted?

rmdlk wrote:
does anyone know to to recover itunes back up file after its deleted?
What is "itunes back up file"?

Does anyone have "Best Practices" to move GRC 5.2 to its own environment?

Hello,
Has anyone else put the GRC applications on a shared server and then decided to move them? We have been running Access Enforcer, & Compliance Calibrator on a box shared with Solution Manager. We now have permission to put it on a separate server. We have been looking for "Best Practices" for making this type of change. If you have experience doing these would you be willing to share knowledge?
Also, what little we have advise or knowledge we have found indicates "there is no way to do a J2EE system copy from a dual-stack system into a J2EE-only system." Does anyone know if this is true?
We want to move the GRC 5.2 to its own environment before we upgrade to GRC 5.3...

Hi Renee,
There is not best practice or methdology to move GRC AC 5.2 easily. AC 5.3 has import/export functionality in place to move most of the data from one environment to another. I will recommend you to upgrade to AC 5.3 and then move everything to new server.
Another way is to ask your BASIS person and see if he can backup and restore DB on another server.
there is no way to do a J2EE system copy from a dual-stack system into a J2EE-only system." Does anyone know if this is true? This is true.
Regards,
Alpesh

Does anyone know if siri is an ISO 5 update or its inbuilt in the new iphone 4S

Please let me know

It's included on the 4S when shipped - but will not be available in the iOS 5 update for older phones.

Does anyone know how to stop the mouse from clicking on its own?

The curser is moving all over the screen, clicking, selecting, opening new tabs, and I'm not touching the trackpad. No external mouse connected. This started three days ago. It works fine while not on the internet. Once online, it begins.

Portables and Magic Trackpad: Jumpy or erratic trackpad operation

Does anyone have wi-fi issues after 7.1.1 update. its really killing the quality of video calls.

its really killing the quality of video calls.Facetime and Skype for example. Tried all the tips including resetting networks, rebooting, nothing helpled.

After I updated my iphone 4S to 7.1.1, there is always problem with Facetime and Skype. Wifi just drops for no reason. I have tried everything, resetting the phone and freezing for 10 min, but nothing helped. Hope Apple will fix this bug soon.

Does anyone have a clue of when is the next iPhone going to be released?

I live in argentina and I want to buy an iPhone in Chicago (my father's going the first week of September). I want to buy the new iPhone, are there any chances that it is going to be released before that?

roaminggnome wrote:
Of course not.
In response to your topic question, not, "Of course there is not any chance of it being released before September."
We only know what you can read on Apple's web site. Clearly it doesn't make sense for them to announce new models too far in advance otherwise people would just wait until the new model appeared and not buy the current model.

Does your new 27" LED Cinema Display buzz?

Got my 27 inch LED Cinema Display yesterday: very nice monitor.
However, I have noticed a feint buzz/ticking coming from the bottom right of the monitor when the brightness is set high. Just loud enough to be VERY annoying!
Is this a feature of the monitor? Does anyone else's new 27" Display have a buzz?

yes, the reason it sounds like the electromagnetic interference that induces tones in speaker drivers (such as the microwave energy from cell phones) is because it is essentially the same mechanical action... which is a resonation electromagnetic coil (which will produce tones at whatever frequency it is vibrating).
The specific tones that it is producing are dependant on the electrical properties of the circuits attached to the coupled device - but it's probably possible that particular properties could cause the coils to create more than a single tone (just like a speaker)... on mine the tone didn't quite sound singular, but since the amplitude was analogue to the brightness i guessed that this pointed the transformer.
It used to be such a serious problem in inductively coupled conductive devices that it could shake the devices to pieces. These days it's only really an irritation in terms of noise - but it remains necessary to design the structure and housing of these devices to dampen and minimise these vibrations.
In much larger transformers the noise is very noticeable (have a listen the next time you pass an electrical substation).
... i could be wrong but it's a common problem in electronics and i think it's likely.

I'm having problems downloading todays edition of the times via The Times App does anyone know if there is a problem

Does anyone know if there is a problem with Apple and its Times App as I am unable to open or download todays edition

I think the best most efficent way to confirm this is to contact the developers using the App page and clicking any Support link

BO Finance - Displaying Reporting Currency/scaling outside of package

Dear All,
Was wondering if anyone had the issue with displaying package currency and scaling outside of the package i.e. when running schedules outside of the package for analysis purposes....
current header syntax:
OBJECT(_CURPACKAGE)!PK-DATENCUR!NAME & "in" & OBJECT (_CURPACKAGE)!PK-DATAENCUR!CUSCALING!SDESC
It works fine when opening the schedule within the package, but it has available the package currency.
thanks

Yes, it's running here.
Remember that this solution only works if you have specified one reporting unit in your schedule or all reporting units or values from filter which will be shown itemized. If it's not itemized it doesn't work cause you cannot aggregate different currencies.
Was this answer a little bit helpful?

Under Windows 7 Ultimate x64 and Boot Camp, my 27 inch Apple LED Cinema Display checks out as a Generic PnP Monitor and is shown as NOT HDCP compliant. I haven't been able to find any kind of an .inf file to use. Does anyone have a solution?

Under Windows 7 Ultimate x64 and Boot Camp, my 27 inch Apple LED Cinema Display checks out as a Generic PnP Monitor and is shown as NOT HDCP compliant. I haven't been able to find any kind of an .inf file to use. Does anyone have a solution? Or is Apple's implementation of HDCP (if it's there) incomplete?

I am having this same issue. Im not sure if this is the cause but I think this is keeping PowerDVD Ultra 11 from playing back Bluray under Windows 7 / Bootcamp

Does anyone know how to connect an older 20" cinema display with the (ADC) adapter end and connect it to a MacBook Pro 17" 2008 model (DVI) ?????

Does anyone know how to connect an older 20" cinema display with the (ADC) adapter end and connect it to a MacBook Pro 17" 2008 model (DVI) ?????

I believe you naeed the Apple ADC to DVI adapter.

I am trying to connect my Macbook pro 2010 to my Samsung HDTV using a mini display port to hdtv cable. Trying to play a slide show in IPhoto but I only get sound with no picture. Does anyone have any suggestions?

I am trying to connect my Macbook pro 2010 to my Samsung HDTV using a mini display port to hdtv cable. Trying to play a slide show in IPhoto but I only get sound with no picture. Does anyone have any suggestions?

I keep saying this over and over, in the hope that people who do a search will find it. Apple cannot possibly test for or be reponsible for the bazillion combinations of adapter, cables, and TV's out there. The only monitors that are 100% guaranteed to work with the MacBook Pro are the Cinema Displays and Thunderbolt Displays, because, they're made by Apple. They're expensive, but they work perfectly.
My guess is that you bought a cheap MDP to HDMI cable, or have a defective one. From my reading of these boards over the past few months, cheap cables have a high failure rate. And the regular priced ones have only a slightly less of one. Try a new one. Make sure you do not damage the Thunderbolt port.

Does anyone an Excel macro to display units/currencies next to its KF?

Similar Messages

Maybe you are looking for