Does anyone encountering date and time reset to de...

Hello to all Pureview 808 lover,
I taken out my SIM card from my Pureview 808 during the weekend and left it turn off over the weekend.
(with battery pack attached and it happen many time)
On Monday, when I put back my SIM card and found the date and time of my Pureview 808 is reset back to default.
So, I just wonder it is nature of the design or the clock battery is weaken ?
Regards
Anderson

Yes, it can be fixed, but it's not an easy task.
It depends on the iMac you own. To have an idea have a look at this guide

Similar Messages

  • Date and time reset when batery is empty

    the date and time reset to initial state when the battery is empty, what should i do, thanx

    Moy666 wrote:
    Hi TJK, Thanx for answering,
    My MBP have already a three months bought, what i should do, call to apple or to dealer?
    I supposed its in warranty yet. THX
    Your MBP has a one year hardware warranty on it.
    As Trey suggested, it wouldn't hurt to try an SMC reset. If that doesn't work, you definitely want to contact AppleCare so you get it taken care of under warranty.

  • As I open my computer, there's a notification telling me to allow these files for a connection, which are very unsual for my mac. I allowed one and my date and time reset to january 1 of 2001. It caused my internet connection to stop working properly.

    Please help me figure out what causes my internet connection and airport extreme run erratically.  It occurred twice already and my only solution is to reset the date and time, and restart my macbook pro. after that, everything seems to work perfectly again. This is only problem that my macbook pro encountered for two years. Thanks!

    Try what Terence Devlin posted in this topic:
    Terence Devlin
    Apr 14, 2015 11:21 AM
    Re: Is Iphoto gone ? i want it back!
    in response to Johannes666
    Recommended
    Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
    If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
    Install the App from the App Store.
    Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
    http://support.apple.com/kb/HT4928
    One question often asked: Will I lose my Photos if I reinstall?
    iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

  • BT6510: does it retain date and time settings afte...

    I am considering replacing my BT Synergy 4500 with a BT 6510. One significant factor is whether the 6510 retains date and time settings afetr a power cut: the Synergy doesn't and resets to 01.01.2000!
    The manual for the 6510 doesn't mention this and the operative on the website chat simply referred me to the manual.
    Does anyone actually have a 651o and can give me an authoritative answer??

    PRAM contains the following information: 
    Mac OS X
    Mac OS 9
    The iBook should remember which Airport to connect to regardless.
    regards
    mrtotes

  • Date and time reset after swith off in 5610 Xpress...

    Hi,
    I have purchased Nokia 5610 XpressMusic last week , and after updating the software from exiting V04.20 to V04.81 from Nokia site. The phone is asking for date and time settimg on every swith on. It would be great help for me ifyou advise a solution.
    debasish

    07-Jun-2008 09:26 AM
    feimeng wrote:
    you may try to reset to the factory setting and see if that works
    thanks for the suggestion, tried the same but it doesn't work

  • My charger switched off my iPhone and now my phone will not switch on unless connected to the charger. But, I cannot access wifi or my sim and the date and time resets. It does not connect to iTunes and freezes after five minutes

    It will not recognise sound and if I take it off the charger, it immediately switches off. I've installed iOS8 previously but nothing is working. Please help!!

    There's only one thing you can do: make an appointment with Apple genius at the Apple retail store for a out of warranty replacement.

  • HT1689 I keep getting the error: Cannot connect to ITunes Store. I recently updated the iOS on the ipad3. Have tried heaps of fixes as suggested in various threads. DNS, date and time, reset etc

    I am a fairly new apple user, just got the new ipad, as part of an evaluation program. I recently did an iOS update and now keep getting the error message:cannot connect to iTunes Store... I tried date changing - no good ... The only thing that worked was to change the DNS setting to 0.0.0.0 as described in another thread. This fix for a day and now still getting the same error message and DNS setting changes do nothing. I have tried the reset method several times to no avail. I'm beginning tho think the ipad wasn't a great idea.... Apple need to attend to this. Like many, I have already wasted too much time looking for a fix. I am part of an IT in education group that will soon be recommending a specific hardware and OS. Could result in the loss of thousands of ipad sales for apple ....
    Anyhow... All or any suggestions are welcome :)

    Also, I've just learned that I can connect to download new apps, but cannot update any apps I've downloaded in the past. How might I go about connecting my reset apple ID with its history from before it was reset? I assume that is the biggest issue.

  • Date and Time Reset

    I've got my clock set to synch automatically, but everytime I turn on my machine the date is set for Jan. 1970. I'm thinking it has something to do with the firewall on my wireless network, as I have to tell my airport to connect to the network (as opposed to it just doing it). But why reset to 1970? Why wouldn't the clock simply just keep going?

    Durden, Welcome to the discussion area!
    The iBook does NOT have a separate PRAM battery. It only has the single large battery. So the other suggestions of replacing the PRAM battery won't work for you.
    Have you tried resetting the PRAM?
    Have you tried resetting the PMU?

  • User status Date and  time

    Hi EXPERTS,
    In notification when we change user status, system logs date and time in action log
    I want to know in which table does user status date and time can be found.
    Regards
    Anil Kumar

    Anil Kumar,
    I'm not a t a system right now, but have a look at JEST and JCDS.
    PeteA

  • Change date and time grayed out

    I'm running iPhoto 11.  I'm trying to change the date and time on some scanned in photos and the option is grayed out.  Not only that, the option is grayed out on many of my photos taken by my camera.  This is frustrating because in the chronological sort, the photos are WAY out of order.

    Hello, i don't know if you figured this out but i just had the same problem on the individual picture however, when i tried doing the "Adjust date and Time" on the Event, it worked!

  • Does Anyone Know Of The fxscript Function In FCE That Shows Date And Time?

    iMovie reads the Date and Time of a clip but FCE does not.
    Simon, Piero and I suspect there must be some undocumented fxscript function that could do this.
    If anyone has any information, please let us know.
    Ian.

    Thanks for all your replies.
    This was the info I got from Joe:-
    "As far as I've been able to tell, it's not possible to grab much of any meaningful information from FXScript. Timecode and Reelname are just about all FXScript knows about. And ReelName isn't particularly useful.
    It's theoretically possible to get this information into a generator using a text filter, XML and a shell script, but I wouldn't exactly call the process convenient or intuitive.
    Sorry, this has come up dozens of times over the past five years. I'm hoping this kind of thing is possible with FXPlug."
    It doesn't mean a lot to me but I have passed it on to the aforementioned FXScript-writers who will no doubt understand it better.
    Ian.

  • HT3180 setting date and time - my apple tv get stuck and says it needs to set the network date and time.  Does anyone know how to do this?

    My apple tv gets stuck and says it need to set the date and time on the network.  Does anyone know how to do this?

    I was able to get my Apple TV working again by downgrading the firmware following the instructions in this message:
    https://discussions.apple.com/message/20008613#20008613
    In case that message disappears, here's my translation:
    1. Connect your Apple TV to your computer via USB. Don't plug in the power cable.
    2. Download the older 5.0.2 firmware from Apple here:
    5.0.2 (Apple TV 2): AppleTV2,1_5.0.2_9B830_Restore.ipsw
    5.0.2 (Apple TV 3): AppleTV3,1_5.0.2_9B830_Restore.ipsw
    3. Open iTunes and select the Apple TV. Hold down the option key and press the restore button at the same time.
    4. In the dialog that opens select the firmware that you downloaded.
    5. The restore process will take a few minutes. Once it's done plug your Apple TV back into your TV. If the date and time message persists just press the menu button to skip it. This got mine working again.

  • Email syncs now say "Updated Mar 30", the day I upgraded to Lollipop 5.0.  The notification should read the date and time you updated email receiving.  Does anyone elsehave this problem?

    Email syncs now say "Updated Mar 30", the day I upgraded to Lollipop 5.0.  Two days later it is still saying Mar 30.  The notification should read the date and time you updated email receiving.  Does anyone else have this problem?  Is there a solution to this?

    We want to make sure your phone is in working order Mb_in_NC. I know it can be difficult when you see different times. What is your make/model of your device? When did it start? Do you have a different time on any other applications?
    AmberF_VZW
    Follow us on Twitter @VZWSupport
    If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • Adjusting date and time does not work for pictures from one camera.

    I have a set of pictures taken with a Casio EX-Z20 camera in my Aperture 2 library. Because the clock of this camera was off by a few hours I changed them all at once with the option "Adjust date and time...". This worked well and when I sorted the images from different cameras by date in Aperture they were in the order.
    When exporting all the images as JPEG the images in the set from this camera was reset to it's original.
    That was very strange, I decided to try and change the date of these images in the master files as well by checking the checkbox "Also change master files".
    When I change the date from 15-10-2008 18:34:44 to 16-10-2008 10:34:44 (+16 hours) the date of the image changes to 16-10-08 01:36:43 GMT+02.00 (+9 hours, 1 minute, 59 seconds).
    When I change the date from 16-10-08 01:36:43 to 16-10-2008 19:36:43 (+18 hours) it ends up as being 16-10-08 10:38:42 (+9 hours, 1 minute, 59 seconds)
    When I change the date from 16-10-08 10:38:42 to 16-10-08 10:48:42 (+10 minutes) it ends up as 16-10-08 01:50:49 GMT+02:00 (-8 hours, 47 minutes, 7 seconds)
    I have worked around this problem by adding some hours to the desired time and eventually got it about right, but this is still a very annoying problem. Has anyone else encountered it or know of a way to avoid it?

    {quote:title=JohniBook wrote:}
    Has anyone else encountered it or know of a way to avoid it?
    {quote}
    I certainly have had issues regarding wrong dates, time stamping and DNG's in Aperture. There have been posts here from others as well with the same kind of date problems.
    I have reported the bug to Apple and hope for a solution to the issue in a near future.
    Regards
    Paul K

  • Automatically Setting Date and Time - How often does it occur?

    Can anyone tell me exactly when Mac OS X retrieves the date and time from Apple's time server? Quite often, the time on my Mac is several seconds out from the correct time. When I open the "Date and Time Preferences", it seems to sync up with the correct time and everything is good.
    Is there any way to schedule when Mac OS X automatically sets the time, or how frequently over the course of a day it sets the time? Or, alternatively, does anyone know of a utility that I can use to accomplish this?
    Thanks in advance for any help you can give me.
    iMac 1.83 GHz Intel Core 2 Duo   Mac OS X (10.4.8)  

    Hi Barry,
    Thanks for your reply.
    I have a wristwatch that receives a radio signal which transmits the correct date and time from an atomic clock in Fort Boulder, Colorado. The watch automatically picks up this signal three times a day (in the early morning so as to get the correct time once we go on/off DST) and sets my watch to it. So my watch is always accurate (so long as it can receive this signal). I have an alarm clock that uses the same principle. It's actually kinda nice...I can look at my watch and KNOW I have the right time!
    At any rate, that's how I know my Mac's clock is out a few seconds...I just check it to my watch.
    The real reason I would like to be able to schedule this function (or, at least have it occur more often) is so my Palm TX gets the correct time from my Mac each morning. I automatically sync it to my Mac every morning, and one of the conduits actually synchronizes the Palm clock to the one on my Mac.
    I'm just curious to find out when exactly Mac OS X sets the clock. Does it happen once a day? Once a week? I haven't had my Mac for all that long, so I do not know what will happen when we go off DST this spring. Will OS X (based on the date) just bump up its clock by one hour, or will it actually get the correct time from Apple's time server and sync the Mac clock to it?
    And, if there's no way the change when this happens or the frequency with which it occurs, is there anyone out there who has written a utility which can do this?
    What about Automator? I'm new to the Mac world, so I am just learning about all this stuff. When I open the Date and Time System Preferences, the clock seems to sync up at that point. Could I use Automator to do this?
    As always, any help would be most appreciated.
    Thanks again for your reply, Barry!

Maybe you are looking for